Custom Group Message Won't Appear

I go to "Details" in the group message and pull down on the screen and nothing appears. Where is the custom group message field? Am I missing something?

Hello there, rygar.maximus.
The following Knowledge Base article offers up some great clarification in regards to the features of group messages and iMessages:
Send a group message with your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5760
Name a group message
You can name group iMessage threads. While viewing a conversation, tap Details, in the upper right. Then drag down and enter the name in the Group Name field.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

When I respond to email the original message won't appear. Why is this?

When I respond to email the original message won't appear. Why is this?

Check Mail/Preferences/Composing/Responding to make sure the box is checked for Quote the text of the original message.

Messages Won't Appear on Device if Outlook Desktop Is Open

If my Outlook is running on my desktop, new emails won't appear on my handheld. How do I get my messages to appear on my device when Outlook is running?
Once my Outlook receives emails that my handheld received earlier, the messages seem to disappear off the handheld device.
Message Edited by aratzky on 11-25-2008 01:59 PM

it depends on how is your Outlook configured to fetch the emails. Do you leave them on the email server ? If not, then once Outlook has swallowed them, the Blackberry device can't see them on the server.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Inbox messages won't appear on Mail

My ymail account won't sync to my Mail. I'm on OS X. I'm not too sure what happened. All my other accounts like hotmail and another yahoo mail are synced and I can access my messages. I tried deleting the account but it's still the same.

it depends on how is your Outlook configured to fetch the emails. Do you leave them on the email server ? If not, then once Outlook has swallowed them, the Blackberry device can't see them on the server.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Success messages won't appear

Hi,
None of my messages appear. I've made sure that show Success
message checkbox is checked. Any ideas?

Nowhere near enough information, " kimmarieforbes".
Are you working with click-boxes? Buttons? Text-entry boxes?
What is the "action" for a success? How much time is set for the
slide? How much time for the click-box itself? Or is it a button?
If so, how much time is it set to be "active"? Inactive? Or maybe
it's a text-entry box. If so, what is the keyboard shortcut, if
any, and how long is the text-entry box set to appear . . . what
other objects are on the slide (in addition to the interactive
object you are referring to here) and what are their times and
other pertinent properties?
<rant>
These forums are known to be among the best support forums in
the world and we're proud of that - but c'mon - we are NOT in the
room looking over your shoulder - remember? We are waaaaay out here
in another part of the world without a clue abgout your issues
except for what you give us. The only "picture" we have of your
problem is the one you paint with words, so - if you really need
help - do a little background work and at least fill us in a bit.
<end rant>
.

How to turn of group message on iPhone 5 ios 6

Hi, I would like to turn off group message on iPhone 5, 6.1.4. If I send a message to the sender of the group message, won't reply aver unify else involve in the conversation. Thanks.

Every setting available for Messages are under the Messages section with Settings.
Settings > Messages > Group Messaging > Off.
This has no effect on the sender of a received message having Group Messaging enabled.

Why can't I send picture messages and group messages with MMS?

Picture messages fail to certain people with invalid destination address. Then the group messages won't send unless I send them as individual texts. Very frustrating.

I am having this same issue! I got my S3 in December & it has worked fine until about a month and half ago. . .around the time of latest software update! I can not send MMMS messages (group texts, pics, videos). It doesn't matter if I am on wi-fi, 3g, 4g LTE. It does not send!!! And I am getting ******. Help Verizon!!

Macro at customer group level

I have question regarding a macro
We are doing Forecast at Product level, So the fcst is diaggreating at sold to party, ship to party, region, sub producgts, and customer groups,
Now some of the custtomer group level we dont want to see the fcst. now some customer group should be clead up,
wherever fcst appear at customer group level, it should be cleand up. we dont want to see the fcst at customer group level.
whever fcst appear at customer group level there should be assign NO FCST master forecast profile.
how i can wirte the macro? plz guide me

Hi,
That particular product and customer groups combination cvcs delete. It means that the particular combination of cvcs deleted. so there is no chance to see the forecast.
regards,
sivaram2411
Edited by: sivaram2411 on Apr 19, 2011 9:03 AM

My Iphone 5 won't send pictures or accomplish group messaging. Please advise! If cannot be fixed soon I will switch to the Galaxy phone. Anyone else having this issue?

My iphone 5 won't send pictures or accomplish group messaging. Anyone else having this problem? Will be switching to Galaxy if not fixed soon.

Hi celtics3456,
If you are having issues with intermittent message delivery in Messages, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

How do I fix my 3gs after 6.1.3 update? It will no longer send / receive group messages and won't send pic text messages either.

Ever since I updated my 3gs (on ATT) to 6.1.3, it will no longer send or receive group texts, and it won't send picture messages
(though I seem to be able to receive picture texts). I've looked around on the boards, and here's what I've tried so far (to no avail):
1. Tried simply turning off / on
2. Tried hard reset
3. Tried having imessages off
4. Turned group messaging off / on (tried while it was off)
5. Turned off all messaging, turned phone off / on, turned all message settings back on
6. Reset network settings
Help! Argghh!!! I never had this much trouble when my previous phone was jailbroken! Here I am, trying to be good!

Thanks, Nick. Calling ATT is a last resort; it's a software issue, I'm sure, and I've also found other
people having the same issue, but none of the fixes work. I reset all my settings: nothing. I'm not sure what you mean by restrictions.

External USB hard drive won't reformat, won't appear in Finder, error: Unable to write to the last block of the device message

So I just got a new MacBook Air and since I had an external USB hard drive (TOSHIBA MQ01ABD100 1TB) lying around, I decided to use it for back-up. Since I only have just the one hard drive, I decided to partition it into two - one for Time Machine backups, and one for general files (formatted FAT so I could use it with Windows). However, the partitioning failed and I ended up with a partition named disk1s2. Plus, it won't appear on Finder anymore, but it appears in Disk Utility.
I have tried to reformat it, but I always get the message "Unable to write to the last block of the device".
Here's the info about my drive:
Name: TOSHIBA MQ01ABD100 Media
Type: Disk
Partition Map Scheme: GUID Partition Table
Disk Identifier: disk1
Media Name: TOSHIBA MQ01ABD100 Media
Media Type: Generic
Connection Bus: USB
USB Serial Number: 1220069C
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Ejectable: Yes
Location: External
Total Capacity: 1 TB
Disk Number: 1
Partition Number: 0
S.M.A.R.T. Status: Not Supported
And here's for disk1s2:
Name: disk1s2
Type: Partition
Disk Identifier: disk1s2
Mount Point: Not mounted
File System: Mac OS Extended
Connection Bus: USB
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Capacity: 999.86 GB
Owners Enabled: No
Can Turn Owners Off: Yes
Can Be Formatted: Yes
Bootable: Yes
Supports Journaling: Yes
Journaled: No
Disk Number: 1
Partition Number: 2
Here's what it says when I run diskutil in Terminal:
Device Identifier:        disk1
Device Node:              /dev/disk1
Part of Whole:            disk1
Device / Media Name:      TOSHIBA MQ01ABD100 Media
Volume Name:              Not applicable (no file system)
Mounted:                  Not applicable (no file system)
File System:              None
Content (IOContent):      GUID_partition_scheme
OS Can Be Installed:      No
Media Type:               Generic
Protocol:                 USB
SMART Status:             Not Supported
Total Size:               1.0 TB (1000204884480 Bytes) (exactly 1953525165 512-Byte-Units)
Volume Free Space:        Not applicable (no file system)
Device Block Size:        512 Bytes
Read-Only Media:          No
Read-Only Volume:         Not applicable (no file system)
Ejectable:                Yes
Whole:                    Yes
Internal:                 No
OS 9 Drivers:             No
Low Level Format:         Not supported
I didn't have any data in it prior to the failed partitioning attempt, so there aren't any worries of data recovery. But I'd really like to be able to use this drive again, and save some money (external hard drives are expensive where I live). Anyone with any ideas?

I'd also like to add that repairing the disk using Disk Utility does nothing but tell me to reformat the drive. So I'm stuck in a loop here.

Had to reinstall iTunes after bad virus and now when I drag and drop song into custom playlist it won't added. No green appears, instead just the circle with slash. What's going on? a fix? Michael

I had to reformat after a bad virus and reinstall iTunes. Now when I try to drag and drop a song into a custom playlist, it won't add the song. Instead of the green + that is supposed to appear, it just shows the circle with cross slash. I created numerous playlist before and never ran into this problem. Any suggestions on how to fix it? Thanks 1ngiri

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

Warning message after generating RMM Customizing Group

Hi experts!<br>
<br>
I want to generate a customizing group in transaction sdoe_rmm01 in order to prepare the receiver generation. The generation process aborts with the following warning message: "201-Err:Metainfo FM MMW_RMM_METH_META_REG_SERVICE", Message no. RMM034.<br>
Although it is only a warning message, the group is not getting generated. When I want to generate existing customizing groups, the same behaviour can be observed.<br><br>
I have looked for more details regarding the warning message and it is number, but I was not successful. Has anybody an idea what the problem is?<br>
<br>
Thanks in advance and best regards,<br>
<br>
Christoph

There can be only two possibilities:
1. You did something wrong which you need to correct
2. The DOE encountered a programmatic error while generating.
No matter what the problem is, any sort of error/warning that stops generation should (atleast briefly) explain what the problem is. This one is not. So my opinion is: Raise an OSS message.
Moreover, the fact that it is referring to a 'metainfo' sounds more like a programmatic error.
Also: Search SAP Notes referring to a similiar message. Maybe its already fixed.
Cheers!

Ribbon Custom tab won't appear on custom list

Hi all! If anyone could be so kind and help me with the following.
I have created a custom list in Visual Studio 2012 and i am trying to add a custom tab to that list.
Below is the content of the elements file for the custom tab and respective controls:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Id="MyCustomRibbonTab"
Location="CommandUI.Ribbon"
RegistrationId="10000"
RegistrationType="List">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location="Ribbon.Tabs._children">
<Tab
Id="Ribbon.AnnualLeaveTab"
Title="Annual Leave"
Description="Annual LEave requests!"
Sequence="301">
<Scaling
Id="Ribbon.AnnualLeaveTab.Scaling">
<MaxSize
Id="Ribbon.AnnualLeaveTab.MaxSize"
GroupId="Ribbon.AnnualLeaveTab.CustomGroupExample"
Size="OneLargeTwoMedium"/>
<Scale
Id="Ribbon.AnnualLeaveTab.Scaling.CustomTabScaling"
GroupId="Ribbon.AnnualLeaveTab.CustomGroupExample"
Size="OneLargeTwoMedium" />
</Scaling>
<Groups Id="Ribbon.AnnualLeaveTab.Groups">
<Group
Id="Ribbon.AnnualLeaveTab.CustomGroupExample"
Description="This is the Annual Leave request custom group!"
Title="Annual Leave Request"
Sequence="52"
Template="Ribbon.Templates.CustomTemplateExample">
<Controls Id="Ribbon.AnnualLeaveTab.CustomGroupExample.Controls">
<Button
Id="Ribbon.AnnualLeaveTab.CustomGroupExample.New"
Command="AnnualLeaveTab.New"
Sequence="15"
Image16by16="/_layouts/15/1033/images/formatmap16x16.png"
Image32by32="/_layouts/15/1033/images/formatmap32x32.png"
Image32by32Class="CSS Class Selector"
Image32by32Top="-205"
Image32by32Left="-341"
Description="Create new Annual Leave Request"
LabelText="Create New"
TemplateAlias="cust1"/>
<Button
Id="Ribbon.AnnualLeaveTab.CustomGroupExample.Approve"
Command="AnnualLeaveTab.Approve"
Sequence="17"
Image16by16="/_layouts/15/1033/images/formatmap16x16.png"
Image32by32="/_layouts/15/1033/images/formatmap32x32.png"
Image16by16Class="CSS Class Selector"
Image16by16Top="-198"
Image16by16Left="-290"
Description="Approve selected request"
LabelText="Approve"
TemplateAlias="cust2"/>
<Button
Id="Ribbon.AnnualLeaveTab.CustomGroupExample.Reject"
Command="AnnualLeaveTab.Reject"
Sequence="19"
Image16by16="/_layouts/15/1033/images/formatmap16x16.png"
Image32by32="/_layouts/15/1033/images/formatmap32x32.png"
Image16by16Class="CSS Class Selector"
Image16by16Top="-181"
Image16by16Left="-290"
Description="Reject selected Request"
LabelText="Reject"
TemplateAlias="cust3"/>
</Controls>
</Group>
</Groups>
</Tab>
</CommandUIDefinition>
<CommandUIDefinition Location="Ribbon.Templates._children">
<GroupTemplate Id="Ribbon.Templates.CustomTemplateExample">
<Layout
Title="OneLargeTwoMedium"
LayoutTitle="OneLargeTwoMedium">
<Section Alignment="Top" Type="OneRow">
<Row>
<ControlRef DisplayMode="Large" TemplateAlias="cust1" />
</Row>
</Section>
<Section Alignment="Top" Type="TwoRow">
<Row>
<ControlRef DisplayMode="Medium" TemplateAlias="cust2" />
</Row>
<Row>
<ControlRef DisplayMode="Medium" TemplateAlias="cust3" />
</Row>
</Section>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler
Command="AnnualLeaveTab.New"
CommandAction="javascript:SP.UI.ModalDialog.ShowPopupDialog('/SitePages/Leave%20Request.aspx?isDlg=1','_blank');" />
<CommandUIHandler
Command="AnnualLeaveTab.Approve"
CommandAction="javascript:alert('Approved');" />
<CommandUIHandler
Command="AnnualLeaveTab.Reject"
CommandAction="javascript:alert('Rejected');" />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>
The contents of the element file for the list is as below:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="IFX_Leave"
Type="10000"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="IFX_Leave"
Description="My List Definition"
Image="/_layouts/15/images/itgen.png"/>
</Elements>
As seen, the RegistrationID and list Type ID are the same so in theory this should work. Also, for other lists deployed through the same solution with the same Type ID, the ribbon tab and controls render perfectly fine.
Any ideas what may be the issue here?
Appreciate your input!

Hi,
According to your post, my understanding is that you had an issue about the custom tab for list.
As you had said, the other tabs for other lists in the same solution worked well, the code would have no issues.
I recommend you create a new clean project with only one list and the tab to check whether it works.
What’s more, you can also change the list template type ID(such as 100), then check whether it works.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

My iPhone won't receive group messages but I can send them ?

I've received group messages and sent them before on my iPhone 4S . Until recently I received group messages extremely late . And now I cannot receive group messages at all . I can start group messages and send them but I can't receive the messages that the people in the group send . My group messaging is on and I have already tried turning off my phone and turning it back on . I can receive regular text messages in one on one conversations perfectly fine . I don't really know what else to do ! Please help !

Did you ever find the answer? I'm having the same problem?

Custom Group Message Won't Appear

Similar Messages

Maybe you are looking for