Custom Hierarchy Download from CRm

Friends
Did any one write a generic program to upload custom hierarchies ?
Please send me one if any one has done.I can go thorugh that and write a program for my custom hierarchy
Thanks for your help
Sundaresan

I have organisation hierarchy defined with HR positions.
When i use standard hierarchy i dont get the positions attached
I want to write generic extractor inorder to get the entire hierarchy sturcture on 0orgunit .
If any has written any generic extractor please help me .
regards
sundaresan

Similar Messages

Customizing not downloading from CRM to CDB

Dear All
Pl help/ guide on the direction to proceed further. Customizing (Domain Ranges DD Texts) are not downloading from CRM to CDB.
Background:
Activities and Campaigns are replicated from CRM to CDB (Mobile). For a particular new field which we have added through AET, the domain ranges are stored in the table DD07T. The task is do a customizing download to replicate these domain ranges to the corresponding CDB table SMODD07T. For this, We would need to create a BDoc type @ BDoc Modeler and then a customizing adapter object with that linked BDoc type. For distribution from CDB to mobile, we would have to create replication object and publication on this Linked BDoc in SMOEAC.
Issue
Now, when I am creating the Bdoc type in SBDM, it prompts that mapped table (SMODD07T) should have two key fields and only one Primary key for the segment and since this is not the case it is throwing the error. I have verified with various std customizing adapter objects and their corresponding sBDocs. In all the cases, the SMO table has exactly key fields, the MANDT client and the SFA GUID. Without generating the BDoc type, the adapter object Banega nahi and I experimented in many ways where I created a custom adapter object with any of the standard campaign and customizing related Linked BDoc types for the adapter object, Initial Load is successful and even huge blocks of data is transferred. But the required SMODD07T table is not getting populated.

Hi,
Ok the initial load is performed without errors.... But did you check the queues?
Best regards,
Caíque Escaler

How to distinguish Delta download from CRM to Mobile from Initial download

Hi guys,
I checked out that when downloading from CRM to CDB (for mobile), the inbound queue is always CRI_XXX..._CDBI.
For data load from CRM to R/3, I remember that initial load and delta load, the inbound queue names would end up in differnet words (I for initial load, D for Delta load). But for load from CRM to CDB, it seems that only 'I' exists.
My question is, how can we distinguish delta load from initial load via the queue name? saying that the queue name is
CRI_CSA_BUPA_INIT_CDBI, can we simply judge that it's an initial load or delta one?
Thanks and best regards,
Raymond

Yes, CRI_CSA_BUPA_INIT_CDBI is the queue created for BUPA initial load from CRM to CDB. Delta loads from CRM to CDB would create no queues - they would be handled in the objects queue itself (for eg. CSABUPA*) queues.
Regards,
Ankan

Changing documents downloaded from CRM into ECC, in ECC

Hi
Our requirement is to change documents downloaded from CRM into ECC, in ECC. I was refering to note 541113, but it is not of much use as we are using CRM 5.0. Also parameter that it says should be set I have set but ...obviously it didin't work. Please tell me what setting needs to be done for CRM 5.0 & ECC 6.0 so that our requirement is satisfied. I have searched SAP notes, without much success.
Thanx in advance.
Cheers
Hits

Hi,
This is very simple.
SAP has provided us with a new Scenario. this is called Scenario A.
This scenario can be made Transaction Type specific.
You need to maintain table SMOFPARSFA in CRM and CRMPAROLTP in R3.
SMOFPARSFA:
Key = R3A_SALES
ParamName = INT_CHANGE_ORDER
ParamName2 = <Transaction Type>
ParamValue = A
CRMPAROLTP:
ParameterName: CRM_SCENARIO
ParameterName 2: INT_CHANGE_ORDER
ParameterName 3: <sales document type>, for example TR
ParameterValue 1: A
Just do these settings and check. This must work
Sharif

Data download from CRM from standard browser based transactions

This is, I'm afraid, rather a general question. I'm doing some R&D for a software development company (SAP Partner), and we're looking for a few use cases for where data is downloaded from CRM, specifically from browser based transactions. We're not interested in anything that downloads from ALV - we've got that covered. Our main concern is other download mechanism that might be available in standard CRM functionality.
If anyone can point to some use cases, involving data download from a browser front end (web dynpro, presumably), that would be very useful.

Hello Matthieu,
As far as CRM7.0 is concerned (which is bsp-based) here are a few applications where users can download information from sap to local pc:
- Take any result list table and hit the "download to excel button".
- Start the "data import tool" that is available in UTIL_SALES business role, you'll be able to download an Excel file as well
- Click any link to attached documents to a business object (sales order transaction for example)
- Etc.
If you need help to start one of those application just let me know.
Regards
Nicolas.

Documents download from CRM systems

Hello friends,
In our prj requirement, we have to download data from CRM systems.
where even we have to download documents for each item level.
we identified some tables which stores those attachments.
but my doubt is how to put these attachments in BW system at item level.
i am lost here kindly give me some inputs.
Rgds,
Ala.

HI Nishadam ,
I too have a similar requirement now ,
did u get any solution for this document download from CRM system , please help me in this regards and its really urgent for me .
Rgds
Anil

Customer Hierarchy download in CRM7.0 Web UI

Hi Experts
Need your expert advice on the below issue:
We are using customer hierarchy from ECC to SAP CRM7.0 for one of our client. I have performed the below steps to bring ECC customer hierarchy to CRM.
SAP ECC System:
1.Hierarchy node is created thru tcode- v-12
2.Customer hierarchy is created thru tcode- VDH1N
Replication steps in CRM:
1.Replicate Customer Hierarchy Customizing thru TCode- R3AS, download object DNL_CUST_THIT .
2.Assign ERP Customer Hier. to CRM hierarchy category in SPRO .
3.Replicate Customer Hier thru Tcode u2013R3AS , download object DNL_BUPA_KNVH.
4.Create account hierarchy thru Tcode- BPH_DNL , we need to create the hierarchy only for the sales area 0001,01,01. So I have selected sales the required sales area only.
5.I checked in web ui and found the result for account hierarchies.
Current Result:
a.ECC hierarchy downloaded, however descriptions for the hierarchy nodes are missing in CRM web ui.
b.Customer assigned to ECC hierarchy can be seen in the u201CAccount Hierarchy Detailsu201D assignment block , however I could not see the customers in u201C Assigned Accountsu201D assignment block.
6.Expected Result :
a.ECC hierarchy display with description in u201C Account Hierarchy Detailsu201D assignment block.
b.Display customeru2019s information in u201C Assigned Accountsu201D assignment block.
Can anybody support and provide the information if we are missing any configuration step ? or the result is the correct behavior of standard system ?
I would really appreciate your help on this.
Regards
Satish Rikhi

Hi Tanya
My issue is got sovled with SAP note 1398619 .However, for the second issue there is no finding.
I am assuming ,that is standard SAP CRM behaviour , if we assign any account in crm , that will be shown in the assignment block.
Regards
Satish

Initial download from crm 5 to ecc 6

Initial Download of ECC 6 customer_main to CRM works well but mapping of bupa_main from CRM 5 to ECC 6 didn't work.
In R3AS I got an short dump:
GETWA_NOT_ASSIGNED_RANGE
So I tried CRMM_BUPA_MAP to send single customers and I got that error.
Partially send, receivers have errors:
I have checked all the fields in the ecc6 settings and crm5 also.
it is very urgent bec. iam at client side.

Hi Devi,
Ya now its clear. So basically you are dealing with the data exchange between the R/3 customer to CRM business partner.
As you mentioned that the CUSTOMRE_MAIN load is successful
and that means you have already done the account group to calssification mapping in R/3 transaction PIDE from R/3 to CRM. Pls check the same transaction for the data flow from CRM to R/3. Also check the number range assignment. For more detail check the best practice guide C03.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Replication of custom z fields from CRM to ECC

Hello,
I have created custom fields in CRM - Order using EEWB. Similarly I have created custom fields in ECC - VBAK. I want to replicate these custom fields from CRM to ECC. Somebody had suggested to use CRM_DATAEXCHG_BADI and method - CRM_DATAEXCHG_AFTER_BAPI_FILL. Can anybody give me a sample code of how to populate table - CT_BAPIPAREX within this method?
Process followed was -
1. ECC - Extend VBAK with zfld1
2. ECC - Extend BAPE_VBAK, BAPE_VBAKX with zfld1
3. CRM - Add zdoc1 using EEWB
4. CRM - Extend BAPE_VBAK, BAPE_VBAKX with zfld1 (same as ECC?)
5. CRM - CRM_DATAEXCHG_BADI and method - CRM_DATAEXCHG_AFTER_BAPI_FILL. - This is where I need to map zdoc1 of CRM to zfld1 of ECC. And then populate CT_BAPIIPAREX. This is where I am stuck.
Thanks!

HI,
If you have added field in EEWB chosen R/3 Adapter, then it will also enhance the Exchange structures and thus i guess CRM_DATAXCHange_badi shud contain in one of its changing parameters
The following blogs gives a good idea in the similar lines.
/people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
/people/vikash.krishna/blog/2009/07/14/crm-70-how-to--4-adding-custom-fields-with-the-new-application-enhancement-tool-aet
Revert if you need further help.
-Satish

Reconcilation of Customer and Vendor from CRM and SRM to 0bpartner in BI

Hi,
I am having customer master data and vendor master data in ECC both represents the same numbers .Ex: 10001 - customer1 and 10001 - vendor1.
I am sending this data from ECC system to CRM and SRM system and again Iam loading this data into 0BPARTNER Infoobject in BW from CRM and SRM systems.
In BW it is messing up, when i do a report on CRM cube it show me the vendor descriptions where i supposed to see customer descriptions .
I can't change the ECC customer and vendor numbers since i need to change all other legacy systems depending on this .
Can any one tell me how to fix this problem and your help is truly appreciated.
Thanks,
Ramkumar

Hi,
Please check following links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?overridelayout=t…
Cross company-code invoice posting and configuration - ERP Financials - SCN Wiki
Regards,
Tejas

Ibase Data Download from CRM 5.0

Hello Gurus,
I want download the following data from CRM 5.0 in a text file ( tab delimited ) :-
IBASE_HEADER -- can be obtained from FM CRM_IBASE_GET_DETAIL
IBASE_COMPONENT -- can be obtained from table IBIN
IBASE_TEXT
IBASE_PARTNER
IBASE_ADDRESS
IBASE_STRUCTURE
IBASE_STATUS
IBASE_COMPONENT_TEXT
IBASE_COMPONENT_ADDRESS
IBASE_COMPONENT_PARTNER
IBASE_COMPONENT_EXTRA
IBASE_ADDRESS_EXTRA
IBASE_COMPONENT_ADDRESS_EXTRA
But for the other data .. what FMs should I use ??
With Regards,
Kallol

HI,
Below are the few tables that you can refer:
IBASE_TEXT           :            CDBD_IBIBT
IBASE_PARTNER     :          CDBD_IBPART
IBASE_ADDRESS          :     CDBD_IBADDR
IBASE_STRUCTURE          :    CDBD_IBST
IBASE_COMPONENT_TEXT      : IBINT
Regards,
PePe
Edited by: PePe on Jun 10, 2009 11:23 AM
Edited by: PePe on Jun 10, 2009 11:23 AM

Product Hierarchy download into CRM from ECC6

Hi Guys,
Recently we have added few Product hierarchies into ECC6 (level 2, 3 , 4 and 5 hierarchies)
now they are not replicated into CRM...
how can I replicate them into CRM from ERP6... quick guidance....?
The object - DNL_CUST_PROD1
Thanks
KP

it will be done maually,
- On CRM
For Defining the Product Hierarchy Strucuture :
CRM IMG -> Cross Application Components -> SAP Product -> Product Category -> Define Category Numbering Schemes
   - make new entry
          Number Scheme     R3PRODHIER
   - after that select the new Scheme, and choose a new entry (should be the same as structure PRODHS on ECC)
For Defining Product ID
CRM IMG ->Cross-Application Components->SAP Product->Basic Settings->Define Output Format and Storage Format of Product Ids (tx. COMCPRFORMAT)
note : should be matched with ERP (Tx. OMSL)
refrence B09_BB_ConfigGuide
الحمد لله الذي علمنا

Customer Master download from ECC 6.0 to CRM 7.0

Hello Experts,
We have an issue where the DELTA DOWNLOAD of a customer master is not working. Also, no BDoC is getting generated when the new customer is created in ECC.
This happens sometimes and not always. Any specific settings or any SAP NOTE on this?
Kindly help.
Regards

Hello,
Since you've mentioned that this issue takes place only sometimes, I guess the TBE31 events are fine then. Probably have a look at SMQ1 of the ECC and check if the queue pertaining to CUSTOMER_MAIN is stuck somewhere.
Just cross check if settings in tables CRMCONSUM and CRMRFCPAR are proper.
Regards,
Rohit

Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

Calling custom BSP application from CRM PCUI

Hi,
We are using the CRM PCUI for channel partner management. Since PCUI framework has some limitations as to how the data is formatted in the layout such as no multiple value selection ( Being a generic framework using blueprint tables we have to use the predefined layout settings and positions) we want to call a standalone BSP application to maintain some of the data such as marketing attributes. We want to do this by providing a link to the standalone BSP application where the data can be maintained. Since we will be calling this application in the create mode of a new BP, is it possible to integrate the whole application as one logical unit ? I mean we want to commit the marketing attributes within the same 'save' methods of the pcui framework. Is this possible to do ? Any ideas or input is greatly appreciated.
Thanks.

Hi,
we've already done a rework of the marketing attributes screen by using the technique I've described in my Weblog <a href="/people/gregor.wolf3/blog/2005/05/27/use-crm-pcui-html-viewer-to-call-a-custom-url">Use CRM PCUI HTML viewer to call a custom URL</a>. But it has one drawback: You can't use the Save button of the PC-UI applicaiton. You have to provide your own. But the usability enhanchement is rearly great.
Regards
Gregor

Custom Hierarchy Download from CRm

Similar Messages

Maybe you are looking for