Custom icon image for folders not showing up in dock

I have used custom icons for years for various folders so I don't have to read through names of folders to know what's in them. With Leopard (10.5.2), the folder icons are visible up on the desktop and everywhere else; however, when I drag a folder with a special icon to the dock,it becomes a normal blue folder again. Why can't the folder in the dock retain the special icon I have assigned to it?

right click on the folder after placing it on the dock and choose display as folder.

Similar Messages

Custom Icon Images for Folders in KM

Hello Everyody,
I have to display folders such as Pesonal Documents, Public documents, Recently used, Favourites etc which are there in the entry point repository in KM. Right now all these folders are being displayed with the default icon image specified. I want to replace these default images with custom images but couldnt see any property where i can change the image path for these folders. I checked the details of all these folders and even went through the properties but there it shows only the default image name speciefied for that folder and no active settings where i can change the image path for custom icon. Kindly suggest how to implement custom image for KM folder icons.
Thanking you all in advance,
Regards,
Sarabjeet.

Hi,
If I understood, you have a KM navigation iview, where some folders apperar. You want to change the icon for each of them differently.
For this do the following:
First have a look into the KM.navigation iview and get the layout set property. Go to System config->KM->Content management->User interface->Settings->LayoutSet and find the layout set you are using. Go to appropriate resource renderer and check the "Icon setting". Change it to: iconreplace.
Now get the KM details for your folders and change the IconSource property to your image Example:
/etc/public/mimes/images/add.gif
Voila...the icons for these folders are changed!
Hope this is your case.
Romano

Custom Logon image changes are not showing up

Hi All,
I am trying to customize logon screen. Since I only have the image and text change, I thought it would be easy to change the UME properties instead of changing the par file.
I have copied my images to the layout folder the same place where the default images are.
I edited the following properties using config tool to display new images and rebooted the server
ume.logon.branding_image
ume.logon.branding_text
When I got the logon page, the default images are gone and it now displays two icons of missing image in its place.
I also tried to restore to default images and change the new image to default image name. This time it picks up the image but sitll displays the default SAP image instead of custom image. I dont understand where it is picking up the image from as I have already replaced that image with the new image.
The directory that I placed my images are
(drive):\usr\sap\SID\JCNN\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\*logon\root\layout*
I would be very helpful if some one can explain where to change the image properties so that my custom images are displayed on the logon screen.
Thanks

Hello Ravi,
Please be sure that new images are present on a web server location over the WebAS...
please go through thease Blogs it will surely help you..
[Portal Customizations Intro - Login Part 1|Portal Customizations Intro - Login Part 1]
[A fast and easy Portal logon page customizing|A fast and easy Portal logon page customizing]
[Change the portal logon page image programmatically|Change the portal logon page image programmatically]
[Is your Portal Logon Page more colorful?|Is your Portal Logon Page more colorful?]
[https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/lookandFeel&]
Reward Points if Helpfull.
Regards
Vinit

My favorite folders not showing up under address bar on safari in my iPad Air. I do have the tab set to on under settings. The folders are still there for me to save to just not visible on safari anymore, help! tried to fix for days. Thanks

My favorite folders not showing up under address bar on safari anymore on my iPad Air.The folders are still there for me to save to just not visible, I do have the tab under settings, safari, set to on to show the favorites, and did reset the iPad, thanks

Quit all apps (Double tap the Home button and swipe the preview page up for each open app) then Reset (Hold the Sleep/Wake & Home buttons until the screen goes black and the Apple logo appears - no data will bee lost)
Make sure you have your Favorites selected properly here: Settings > Safari > Favorites

I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.

I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.

If you are using a Mac, simply hit Command-Spacebar to bring up Spotlight Search. Begin typing the name of the application and when you see what you are looking for, press enter. You should get a hit by the second or third letter you type. Great way to launch apps on computers that you are not familiar with.
Windows 7 and 8 should have something similar. I think you simply press the Windows key and begin typing. Press enter when you see a match.
Both Mac and Windows search tools can be customized to search for applications, files, emails and so forth. For Windows, look for Taskbar and Start Menu Properties. For Mac, go to Preferences Spotlight. Turn off items you know you won't need to speed up searches.
Make Windows 7 Start Menu Search Find Your Applications Faster

Mail-enabled Public Folders not showing as enabled in PFMC or EMS

Good morning
I have some PF's that are mail enabled, but running the Get-PublicFolder cmdlet shows "mailenabled" attribute as False. Also, in the PF Management Console, the folder shows as not mail enabled (with an option to enable it).
I found this thread that seems to be related:
http://social.technet.microsoft.com/Forums/exchange/en-US/918aad03-c96f-4023-89cc-ec2c66e51b93/mailenabled-public-folders-not-showing-as-mailenabled?forum=exchangesvrgenerallegacy
I'd like to do some testing, but recreating this issue with a test PF is actually really hard.
Does anyone know a way to force that "mailenabled" attribute to False after mail-enabling a PF? I can't find any ADSI attribute that is obvious. I changed MsExchRecipientTypeDetails to <not set> but that didn't do it...
**UPDATE** I just found out that msExchMailboxGuid is missing from that object. Does anyone have any kind of suggestion for how I can find the Guid of the mailbox that is no longer associated with this PF?
**UPDATE 2** I have found other PF's that are missing this attribute, but they are not displaying any symptoms. They are showing as mail enabled in the EMS and PFMC. So I guess this isn't a required attribute.
Could anyone explain the purpose of this attribute for mail-enabled public folders? I just assumed it was required.
Thanks!

Hi,
Do you migrate these mail-enabled public folders from previous Exchange server to Exchange 2010?
Please check if you can see the SMTP address for mail-enabled public folders via Properties of Public folders.
Please check if they show in the Microsoft Exchange System Objects in ADUC.
Besides, I recommend you mail disable the public folder and then mail enable it again to check the result in the Public Folder Management Console.
For a mail-enabled recipient, a minimum set of attributes is required to make all Exchange components work properly. For example, a mail-enabled entry (a user, contact, group, or public folder) has to have at least these attributes: mailNickname, legacyExchangeDN,
and displayName. Without the mailNickname attribute, an object is not considered mail-enabled.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Content Viewer for Desktop not showing/working

Hi,
After updating the DPS Desktop Tools for CS6 (2.04.1) on windows for my Creative Cloud CS6, the Content Viewer isn't working anymore: pressing the preview button open the preview popup loading progress bar (which I guess prepare all the files), disapear when the process is done, then nothing.
My only way to preview my modifications is to update the downment in the folio, then downloading the udpate on my iPad (no direct preview on iPad, I'm on windows).. and it's not reallyproductive!
I tried to find the application itself to launch it manually, with no luck.. and also, to see if it's not a firewall issue (I'm using windows default one, and using Avast for the virus protection).
Thank you for your help

Thanks, but still not all people in a team will have an ipad, but all work on a computer. The problem is settled anyway with the download of the Viewer that exists for both Mac and Windows.
Diane
Le 2012-10-11 à 07:41, Totyo a écrit :
Re: Content Viewer for Desktop not showing/working
created by Totyo in Digital Publishing Suite - View the full discussion
I confirm this last message from Bob. quick tests are good on the desktop viewer, but it doesn't reflect what can be your folio on a device.
just too bad that you can't preview on the iPad on Windows...
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4766104#4766104
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4766104#4766104
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4766104#4766104. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why does Local Folders not show up when I install Thunderbird on certain computers?

I've installed Thunderbird on my computer and it looks normal with "Local Folders" showing up in the left pane. I didn't add an email account, I just installed Thunderbird and an add-on called ImportExport tool and left it with only Local Folders. But when I try to do the same thing and install it on someone else's computer to help them import an .mbox file, when I install Thunderbird on their computer, "Local Folders" is not there. The left pane is just completely blank. And it looks like I can't import an .mbox file without it being there. I tried installing it on another laptop too and the same thing happened with no Local Folders. Why is "Local Folders" not showing up for these other two computers?

I circumvented the problem by copying the c:\users\username\appdata\local\thunderbird folder and the c:\users\username\appdata\roaming\thunderbird folder from my working PC to the nonworking computers, and Local Folders appeared in Thunderbird on those computers. It seems like these files aren't being generated properly on installation.
I tried uninstalling Thunderbird from my working PC and reinstalling it again to see what would happen (after also deleting those two appdata folders so that fresh ones would be created), and this time Local Folders did not appear on my PC as well. I don't think I did anything different during installation either. So I'm not sure why the Local Folders are no longer being generated at installation.

Custom background image for 7942 IP phones on CCM 6.1.2

All,
i am unable to create the custom background images for the Cisco 7942 IP phone, i am running a CCM version 6.1.2. I have uploaded the Image files and also the List.xml file, but when i click on custom images i dont see the image that i uploaded and it say "no selection available". And also after i uploaded the files i have restrated the TFTP services.Have attached the images and List.xml files.Please have a look @ them and let me know if i am missing something here.
Thanks,
Rohith

First off, as this is a CUCM question, you'd be better of over in the IP Telephoney forum (
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/ip-telephony )
The thing that jumps out at me is the case of the filename. CUCM Runs on Linux which is case sensitive. Try matching the case.
If that doesn't help, try looking at the phone logs or Wiresharking the phone.
GTG

Time machine icon does not rotate and back up icon on desktop does not show during backup session.

Time machine icon does not rotate and back up icon on desktop does not show during backup session since I installed Maverick. Why? How do I fix it?

That's the new look of it. No way to change it other than file a complaint with Apple. If ENOUGH people do thst they may "fix it".
http://www.apple.com/feedback/macosx.html

Folders not showing..

Dear Si/Madam,
I am using office 2013 standard sp1,
in outlook 2013 i have configured my office mail id with POP setting,
the Mail server is Linux based centos mail server.
some of the folders not showing in the folder list. but i can able to view the all the folders in Webmail.
Please Help on this issue...
Siva Rakesh

A POP3 account can only download from the Inbox folder. If you want to your folders to synchronize with the mail server, you'll need to configure it as an IMAP account.
See:
Convert from a POP3 account to IMAP
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Icons for Aliases not Showing up...

I like to organize my apps into folders of aliases. I do this by dragging them into folders holding option and command. For some reason the icons are not showing up for the aliases for many applications. Here is a video.
http://screencast.com/t/yULlpzXqFrI
They show up with the Clean App icon: http://www.syniumsoftware.com/cleanapp/
It is a strange issue. Does anyone else have this problem?

Okay - that one worked.
So, the issue is not that icons, the aliased items, are missing per se, it is that the aliases are displaying an incorrect icon.
The incorrect icon appears to be a modified .zip icon. Why that is being used, I don't know unless it is a combination of how the app is written and whether it complies fully with OS X programming requirements. An alias is functionally nothing more than an icon and a pathname. The OS should grab the icon to be used from the resources in the source file. However, if that is miswritten somehow then the OS might grab any icon; for some reason it may be 'remembering' the icon used by the original download for the item.
This happens often with documents (image files, text files, etc.) when aliases are made to them - since what appears to be a custom icon is often a temp one created on the fly by Preview, it does not survive to the alias, which gets displayed with a generic icon.
One thing you can try to see if it will fix it - do a Get Info on the alias, and also on the original of that alias. Then copy the icon from the upper left of the original's Get Info window and paste it over the wrong icon in the Get Info window for the alias. This is tedious, but need be done only once for each item. If you need additional aliases for the same item, just copy (Duplicate in Finder's File menu, or Option-drag it) the alias with the good icon.

SharePoint 2013 custom search Result Type for "Documents" not showing up as option

I'm trying to create a custom search Result Type called "Documents" that will filter to MS Office filetypes and PDF's.
However, when I perform a search, although many of these types of files show up in the results, I don't have "Documents" as a Result Type option.
Here are the steps I'm following:
From my Enterprise Search Center subsite: Site Settings > Manage Result Types.
New Result Type.
Name: Documents
Source: Documents (System) - this out-of-the-box Result Source appears to cover the filetypes I need.
Types of content: I've tried leaving it blank (to match all content) and specifically picking the types I want.
What should these results look like? Office Document Item.
Check Optimize for frequent use.
Save.
I then go back to my search center and search for a common keyword. Many in-scope file show up in the search results. However, under Result Type, I don't see "Documents," even if I click "SHOW MORE."
Please advise.
Thanks.
Brad

@Mikael As you say, to display the exact results when we click a result source, we should implement logic code to check whether item should be displayed. I have followed steps nearly the same as the topic owner but I saw nothing different between Everything
and my custom Result Type.
Here are the steps I'm following:
Create a custom result type, named Job, and specify a custom display template for it.
Set its condition to filter list items that have JobName site column ( JobName is site column's managed property) equal of any "IT" or "Doctor".
I search for "Perter", it returns 5 items with Everything. I expect that it should return 3 items since only those items contain JobName site column.
Search is fun but rather headache sometimes, give me advise please :)
Thanks,
Hoan.

Icons for running apps are not showing in the dock

I just noticed that newly opened apps were not appearing in the dock. I then closed and deleted some apps that had been residing permanently in the dock, and started them again. Their icons did not reappear. I'm running Leopard on a G4 ibook. Does anybody have any idea why this is happening?
Also, that little light which comes on under the icon in the dock if the app is open does not come on for Safari. Even though it is open, the icon sits there with no light. Why is there no light, I wonder.

delete the file homedirectory/library/preferences/com.apple.dock.plist and log out/in. your dock, spaces and exposé will be reset to the defaults. see if that fixes the issue.

Context menu to select folders for syncing not showing up

I saw this @ferman:
How to: Choose which Creative Cloud shared folders you sync
Does anyone know how to get this to work?
Have Yosimite, latest version CC 1.8.1.451, restarted, syncing is active.
But the menu as mentioned is not showing up.

I tried that, and I'm still having the same problem. After I repaired the disk (I also repaired disk permissions, verified the disk, and verified disk permissions to be thorough), I got the following error message:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Is that part of the problem, or a different one?

Custom icon image for folders not showing up in dock

Similar Messages

Maybe you are looking for