Custom Icon/Marker on XY Plot

Hello,
I have an XY plot in which shows the intended path and current position of a aircraft. I have drawn up a picture of what it somewhat looks like and I attached it to this post. I would like to have a custom icon that will point in the direction the aircraft is flying. I have the heading, so that data is not a problem, though, I am sure there are other problems that I will run in to. I've only looked into this a small bit and have come up with quite a few dead ends. I am now considering going down the ActiveX path, but wanted to get some insight before I dove into that (especially I have not done at ActiveX). That being said, take a look at my picture, which will better explain what I am looking for. I show only 4 time quantities, but there will be many more in the final product since it is a real-time application.
I have seen this page, http://forums.ni.com/ni/board/message?board.id=170&message.id=379432&query.id=4622127#M379432, but considering it is over a year old, I wanted to check and see if anything has changed.
Thank you and let me know what you guys think.
Michael
Message Edited by MegaWatts on 04-12-2010 11:41 AM
-You can never have too much power...
Attachments:
custom_marker.jpg ‏43 KB

Use a picture control.
LV has a shipping example of a XY XChart that is based on the Picture.
THis thread has links to threads with picture related examples.
I used the picture control to render the vectors showing air speed and direction inside a mine gallery. It worked good for me.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Custom Icon / Marker / Point-style on Graph

Is there a way I can use a custom icon (or point-style) on a graph or chart? I want to place a series of points on an XY-Graph but I don't want to use any of the built-in point styles, I want to use a .gif file I have. I have toyed with the idea of converting an XY position to a screen position (in pixels) and hiding / showing an icon already on the front panel, and moving it. This seemed like a bit of a hack to me, I'm hoping there's a better way.
Thanks

ptilghma -
I know you can modify programmaticaly:
Graph palette
Plot legend (waveform chart, waveform graph, xy graph, and digital waveform graph only)
Scrollbar (charts only)
Blinking plot
Label scroll position
Active X/Y Scale
Using property nodes but I don't think that it modifies the icon.
I think mapping out the screen and applying some sort of logic to replace the points is your only way out.
Here is a link describing the use of property nodes in graphs
http://digital.ni.com/public.nsf/websearch/A0525AF9D64408F186256BFB005970EB?OpenDocument
Best Regards
Bruno Noronha
Bruno Noronha
Certified LabVIEW Associate Developer
Using LabVIEW 8.6

Disk First Aid - Problem: Custom icon missing

Hi
Wonder if anyone can help me - my mac kept quitting out of printing photos to my Epson R300 and then froze. I didn't let it self repair once restarted but left it to do it today manually. I set Disk First Aid going and it came up with about 30 "Custom icon missing" alerts and when I asked it to repair it couldn't repair them.
Anyone know what's happened there and how to fix it?
I've noticed that the mac has been quitting out of programmes a lot lately but without the 'this spllication has unexpectedly quit' alert. I haven't added any new software or hardware lately either.
Many thanks!
iMac Flat Screen Mac OS 9.2.x Mac OS 9/Mac OS X Panther Dual Boot

Vicky,
Welcome to Discussions.
Fortunately, the Custom Icon issue will have no impact on the general reliability of your mac.
As a bit of background, one of the special attributes that can be applied to a file or folder (like modification date, or label, or comments, or the FileType and Creator - so a document knows which app it is associated with when you double click it) is this "Custom Icon" setting.
So you have 30 files / folders that have been marked as having a custom icon. But when it goes to get the custom icon to display the file / folder in the Finder, it can't find it. You usually just end up with a generic icon for the file / folder. It offers no extra functionality other than displaying a pretty icon in the Finder. Similarly, when it doesn't work, you lose no functionality, other than that.
The applications quiting unexpectedly could be an issue, but issues with printing colour photos to a printer may be memory issues. Colour photos, perhaps .jpg, are compressed. As your printer doesn't have built-in decompression software, the pictures must be decompressed on the Mac before sending to the printer. And there is the issue, if this requires too much memory, your mac can do strange things.
Is printing from OSX any better ? I would have thought a G4 iMac with Panther would be a dream to work on.

Custom Icons and photos in pop-up boxes not showing up in My Google Maps

I created a special map in Google Maps called Tagworts in 2009. It has custom icons which show in Safari but not in Firefox (16.0.2). These items are also supposed to appear in the side panel where all the information related to each place is listed. The pop-up boxes which link to the icons on the map do not show the photos which used to be there (this is also the case with Safari).
I can't tell if the map works or not in other browsers. I need the map to work for a job application (the map is part of my work portfolio).
Is this a combination of problems with updates in both Firefox and Google?

Works here in Firefox 16.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Firefox > Preferences > Content: [X] Load images automatically
*Check the exceptions in "Firefox > Preferences > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.image pref should be 1.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Custom icons 'unclickable' in icon view & not shown in coverflow

Hi,
I just got off the line with Apple support, who couldn't solve my problem and then just told me that Leopard didn't support what I was doeing and thus that it was not there problem. Very un-apple if you ask me...
Here's the problem:
I create custom icons for my movies by pasting images (Jpeg's or what have you) onto the icon in the 'Get info' window of a file. This works fine, however when I view the files in icon view I can't select the file by clicking on the icon, only by clicking on the text below. Strangly enough this problem dissapears when I edit the icon size in the 'View options' to a size equal too or smaller then 116x116. At this point I can select the file without any problem.
The same sort of happens in coverflow. Here I can't see the icon in coverflow if the icons are fairly large. Once I reduce the size of the coverflow bar too the point where the icons are very small the custom icons reappear.
The make the matter even more strange this problem only occurs with files where I created a custom icon for since I had Leopard installed. All custon icons created under 10.4 work fine.
This indicates too me that Leopard has problem with handeling the resolution of icons.
Note also that Leopard stores icon images in different sizes. Try copying an icon image from the 'Get info' window, then launch Preview, then select 'File' and 'New from Clipboard'. You will see that there are multiple images here.
Anybody know how to solve this?

Getting the same stupid behavior here!
I had a lot of customized Tiger folder icons but now i've got no good tools for customizing these new huge Leopard ones.
I began using *Icon Composer* from the developer tools after doing the graphics in Photoshop, then using IconDroplet to get them into a form where i can copy and paste them between *Get Info* windows. What a pain.
Now i discover this bit where they're not clickable once i replace them! I didn't know about the behaviors when making them big in *Cover Flow* and small in Icon view until i read this.
I've been snooping around but i haven't found what needs to be tweaked where to allow them to behave properly.
!http://img228.imageshack.us/img228/5186/scottdartve1.png!

Custom Icon Frustration

I built an AS3 component and designed a custom icon.
Right-clicked symbol in library, selected component definition and
clicked on the icon button (under description) to set an icon.
When I select custom... my finder pops up and I can navigate
to any folder on my machine but I can't select an icon, all .pngs
(and all other files) are greyed out.
Possibly related, if I select one of the normal icons (button
or something) it sets the icon correctly but I then can't set the
icon back to the default icon and I still can't set a custom icon.
I originally created the icons in photoshop, but I've also
tried exporting them from Fireworks -- no luck. I also tried
finding the default icons in my installation and editing them but
sadly this didn't work either (maybe I looked in the wrong place).
I'm using CS3 on Mac -- please tell me this isn't a bug, I
really don't want to have to buy a windows copy of Flash just to
add an icon to a component.

It is a bug. Nivesh at Adobe support was kind enough to email
me the solution: you need to enable Version Cue for file operations
(Preferences / General category / Enable Version Cue).

Automatically create folders then attach custom icon to each folder.

This is my current working script, does anyone know how I can now add customer icons to the folders in Applescript
Many thanks
Matt
set theWeekNumber to ""
repeat
display dialog "Please enter the week number:" default answer theWeekNumber
set theWeekNumber to text returned of result
try
if theWeekNumber = "" then error
set theWeekNumber to theWeekNumber as number
exit repeat
on error
set thePrefix to "INVALID ENTRY! "
end try
end repeat
set theAFolder to "AFolder_WK" & theWeekNumber
set theBFolder to "BFolder_WK" & theWeekNumber
set theEnd to "_PSD"
set theEnd2 to "todo"
tell application "Finder"
make folder at folder "Studio:Users:matthewchild:Desktop" with properties {name:theAFolder & theEnd}
make folder at folder "Studio:Users:matthewchild:Desktop" with properties {name:theBFolder & theEnd}
make folder at folder "Studio:Users:matthewchild:Desktop" with properties {name:theAFolder & theEnd2}
make folder at folder "Studio:Users:matthewchild:Desktop" with properties {name:theBFolder & theEnd2}
end tell

The following script uses a handler that will set a custom icon to a file item. In this example, you are prompted for the icon file and the file item to set to the icon, but you can just pass the desired image and folder paths directly to the handler.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFD891;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
-- assign an icon to a folder or file (requires Developer Tools)
-- any image file can be used for the icon
property startingDirectory : (path to home folder) -- a place for the file choice dialogs to start from
on run -- example
try -- check for tools
get "/Developer/Tools/" as POSIX file as alias
on error
error "Developer Tools not installed"
end try
set iconFile to (choose file with prompt "Choose an image file for the icon:" default location startingDirectory)
if (do shell script "/usr/bin/file " & quoted form of POSIX path of iconFile) does not contain "image" then -- check image file
error "The icon file is not an image"
end if
tell application "Automator Runner" to tell open panel -- using this panel allows the choice of a file or folder
set floating to true
set can choose directories to true
set can choose files to true
set allows multiple selection to false
call method "setShowsHiddenFiles:" of it with parameters {false}
set title to "Select an item to set to the custom icon:"
set prompt to "Set Icon" -- this is actually the button text
activate
if (display it in directory startingDirectory) is 0 then -- cancel button
error number -128
else
my (setCustomIcon from iconFile to (it's path names as text)) -- just one item
end if
end tell
end run
to setCustomIcon from imageFile to destination
Set the icon of a destination file item to the image contained in imageFile
parameters - imageFile [various]: an imagefile for the icon (Finder alias or POSIX text)
destination [various]: a destination item to set to the icon (Finder alias or POSIX text)
returns [boolean]: true if icon is set, false otherwise
set imageFile to imageFile as text
if imageFile starts with "/" then -- check for POSIX file
set imageFile to imageFile as POSIX file as alias
else
set imageFile to imageFile as alias
end if
set destination to destination as text
if destination does not start with "/" then -- check for POSIX file
set destination to POSIX path of destination
end if
try
tell application "Finder" -- copy the icon image to a temporary file
(duplicate imageFile to (path to temporary items) with replacing) as alias
set tempImage to quoted form of POSIX path of the result
end tell
set tempResource to quoted form of (POSIX path of (((path to temporary items) as text) & "TempResource"))
do shell script "/usr/bin/sips -i " & tempImage -- add a Finder icon to the image
do shell script "/Developer/Tools/DeRez -only icns " & tempImage & " > " & tempResource -- get the icon resource
do shell script "/usr/bin/file " & quoted form of destination -- determine the destination file type
if the result contains "directory" then -- folder
set theTarget to quoted form of (destination & "/Icon" & return) -- create Icon\r file
set Command to "rm " & theTarget & "; " -- remove any existing custom icon
set Command to Command & "/Developer/Tools/Rez -a " & tempResource & " -o " & theTarget & "; " -- add resource file to a folder
set Command to Command & "/Developer/Tools/SetFile -a V " & theTarget & "; " -- make it invisible
else -- file
set Command to "/Developer/Tools/Rez -a " & tempResource & " -o " & quoted form of destination & "; " -- add resource to a file
end if
set Command to Command & "/Developer/Tools/SetFile -a C " & quoted form of destination -- set custom icon attribute
do shell script Command -- do it
on error errmess number errnum -- oops
log errmess
-- display alert "Error " & errnum message errmess buttons {"OK"}
return false
end try
try -- remove temporary files
do shell script "rm " & tempImage & space & tempResource
end try
tell application "Finder" to update (destination as POSIX file)
return true
end setCustomIcon
</pre>

How to assign file extension and custom icon to executable?

Hi all,
I was reading an old thread about this issue:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=116925
I need to try to do this. My application uses a custom file extension (i.e. .abc). Upon installation I would like to:
1. Assign My App and custom icon to the file class (extension .abc).
This could be done by manipluting the registry (http://msdn.microsoft.com/en-us/library/bb776856(VS.85).aspx)? This could be a problem with Vista s unless registry operations occur during installation any changes are placed in a VirtualStore, correct?
2. Enable the double-clicking of .abc file type to pass the data in the file to my VI (exe).
According to the File Handling Guidelines of Jean-Pierre Drolet (http://www.openg.org/tiki/tiki-index.php?page=File+Handling+Guidelines) the best way to do this may be using LabVIEW as an ActiveX server.
I know that when I build an executable (or installer?) there is the option to enable LabVIEW to act as an ActiveX server. This much I know I need to do.
I thought I would open this discussion again as others may be interested and there doesn't appear to be a completely clear solution available. Please do contribute where you can.
Cheers,
Battler.

battler. wrote:
My application consists of Event Structure.
How to register for ommand line event so that when a user double-clicks on a .abc file I can handle the opening of it?
This needs to work (the files need to open) not only when the application is closed but also when it's already open.
Anyone have ideas?
The solution to that is to implement a DDE server in your application (and add DDE entries to the registry on installation). There are still DDE functions in LabVIEW vi.lib\Platform\dde.llb but they are considered depreciated and have been removed from the palette, also because Microsoft is trying to tell everyone that DDE is depreciated and sort of unsupported too. But it is still the mechanisme to pass actions from the shell to running applications.
I hesitate to send you over to lavag.org where there have been some discussions about this years ago. If you go there you would do good to employ a friendly attitude. That board is run all by enthusiasts and idealists and they are all great folks but react not very friendly to people with an attitude.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Mystery of the Disappearing Custom Icons

iMac 2.66; 10.6.4
I create simple custom icon labels for the docs & folders in my dock. I type a filename in TextEdit, take a screenshot of it, open the screenshot in GraphicConverter, and copy & paste it into the getinfo window of the doc or folder. Then I drag it to the dock. Now and then, with no pattern or seeming cause, the custom icons on one or more disappear. Some never disappear. Sometimes it'll be weeks with no problem, sometimes hours. I repair permissions twice a week without fail. I have no other issues going on. Anyone know why this is happening? I've searched the fora but can't find similar problems.

jimbo66
I tried helping another with a similar problem. He eventually found a solution from another post. http://discussions.apple.com/message.jspa?messageID=4499196#4499196
Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini Mac OS X (10.4.8)

Trouble with some documents: no custom icon, only generic appears

I tried anything: rebuilt launch servcice, permission repair, daily, weekly, monthly scripts (using maintanace, onyx, etc...) BUT all the documents associated with Openoffice have no custom icon. I also tried reinstalling oo with no success. It happens with textedit and keynote (using "get info", open with, apply to all) and don't know why?
Can anybody help me?
Thanks!

You could create a new admin user and move the data within each of these folders to the corresponding folder on the new account: Desktop, Documents. Library, Movies, Music, etc. You can di it most easily IMO, by copying your Home folder to DVD first. Alternatively, you could use Users/Shared for the data.
But it would really be best to sort this issue in your present user.
It would be a good idea to test with a new user though to see if the problem exists there.
Create a new account, name it "test" and see how your OO & TE work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

Custom icons not showing up in installer dialogs

What are the steps that are required to get a custom icon to show up in the installation dialogs?
I have custom icons setup in the application descriptor xml file for my app... and they do show up in the OS after I install the application but I don't see the icon showing up in the install dialogs.
Any ideas why the custom icons are not showing up in the installation dialogs?
Here is what TweetDecks installation dialog looks like... (this is what I want)
Here is screenshot of what my installation dialog looks like...

You need to sign your app with a certificate that chains up to a trusted root certificate. In general that means you need to get a cert from verisign or someone like that. If you get the friendly warning dialog on the first installer screen rather than the scary one with lots of red x's, you should then see your image

Custom icon seems locked ... can't change it

Powermac G5/10.4.6
A while back I put custom icons on two partitions of a LaCie FW drive. I'd like to change the icons, but I can't select them in the "Get Info" window. I can change icons of other drives, just not these two partitions. When I click on the icon in the info window, it does not become "selected" (with the blue border around it.) Pasting does nothing and dragging an image into the Preview area of Get Info does nothing, either.
I've got Read & Write permissions on both these drives.
Any ideas?
AG

hi again,
just follow the steps as i wrote them before. i'll put them here again w/ some more comments to walk you through
1. double-click on the Terminal Application: Applications > Utilities > Terminal.
2. a "Terminal" window pops up
3. now enter the letters "cd", then a space, then drag the icon for the drive from a finder window into this Terminal window.
4. hit return.
now enter this: ls -lasF
then hit return to see what's in that area.
do you see a file in that listing called .VolumeIcon.icns ?
post back if it's still not clear so far...
to delete that file, enter in tothe same Terminal window the following command:
sudo rm .VolumeIcon.icns
then hit return.
then enter your admin password and hit return.
then enter ls -lasF again. this custom icon file will be gone now...
cheers

Custom icon image for folders not showing up in dock

I have used custom icons for years for various folders so I don't have to read through names of folders to know what's in them. With Leopard (10.5.2), the folder icons are visible up on the desktop and everywhere else; however, when I drag a folder with a special icon to the dock,it becomes a normal blue folder again. Why can't the folder in the dock retain the special icon I have assigned to it?

right click on the folder after placing it on the dock and choose display as folder.

Custom Icon Images for Folders in KM

Hello Everyody,
I have to display folders such as Pesonal Documents, Public documents, Recently used, Favourites etc which are there in the entry point repository in KM. Right now all these folders are being displayed with the default icon image specified. I want to replace these default images with custom images but couldnt see any property where i can change the image path for these folders. I checked the details of all these folders and even went through the properties but there it shows only the default image name speciefied for that folder and no active settings where i can change the image path for custom icon. Kindly suggest how to implement custom image for KM folder icons.
Thanking you all in advance,
Regards,
Sarabjeet.

Hi,
If I understood, you have a KM navigation iview, where some folders apperar. You want to change the icon for each of them differently.
For this do the following:
First have a look into the KM.navigation iview and get the layout set property. Go to System config->KM->Content management->User interface->Settings->LayoutSet and find the layout set you are using. Go to appropriate resource renderer and check the "Icon setting". Change it to: iconreplace.
Now get the KM details for your folders and change the IconSource property to your image Example:
/etc/public/mimes/images/add.gif
Voila...the icons for these folders are changed!
Hope this is your case.
Romano

Custom icon lost from dock when clicked.

Hello.
I'm currently running OS 10.6.1 on 15" MBP w/ 2.4 Ghz Intel Core 2 Duo, 4 GB RAM. I experienced this same issue in Leopard, but was hoping Snow Leopard would fix it. I thought it did, but it just happened again.
I keep several documents in the dock that I use very frequently (three MS Excel workbooks, 1 FM Pro database). For some reason, when I click on any of the Excel docs, the custom icon I have assigned to it is lost. Even when I reveal in Finder, the icon has just been removed, and the standard Excel icon shows.
The funny thing is that the custom icons, when replaced, seem to last for several clicks, then for some reason, they just go away when the doc is clicked.
Has anyone experienced this issue? Any help would be awesome.

Hi eye sean,
The program icons on your Dock (App Store, System Preferences) are alias links (shortcuts) and not the programs themselves. You can't delete them by removing them from the Dock. Now, if somehow they were accidentally removed from the /Applications folder then that's a bigger issue. I take it neither of the programs or in that folder?
If that's the case there's two things I'm aware of worth trying:
Run a repair Disk Permissions from the installation disc that came with your computer
Reinstall the Operating System via the installation disc
If System Preferences (the application) is completely gone, then it's option #2. If it's corrupted the disk permissions may resolved it. I'd say you could make a new user to see if a preference pane that's specific to your current user is causing problems, but without System Preferences access that's not really a valid option.

Custom Icon/Marke​r on XY Plot

Similar Messages

Maybe you are looking for

Custom Icon/Marker on XY Plot