Custom icons not showing in Google Maps

I have saved to my public Dropbox folder some custom icons (this folder was recommended by the icon developer).
The icons can be used and viewed on Google Maps when using IE but not using FF 8.0.

That is a problem with CORS (Cross-Origin Resource Sharing).
* http://enable-cors.org/ enable cross-origin resource sharing
* https://developer.mozilla.org/En/HTTP_access_control
See this MozillaZine forum thread "My own Google Map icons are not visible in Firefox 8":
* http://forums.mozillazine.org/viewtopic.php?f=25&t=2359775

Similar Messages

Custom icons not showing up in installer dialogs

What are the steps that are required to get a custom icon to show up in the installation dialogs?
I have custom icons setup in the application descriptor xml file for my app... and they do show up in the OS after I install the application but I don't see the icon showing up in the install dialogs.
Any ideas why the custom icons are not showing up in the installation dialogs?
Here is what TweetDecks installation dialog looks like... (this is what I want)
Here is screenshot of what my installation dialog looks like...

You need to sign your app with a certificate that chains up to a trusted root certificate. In general that means you need to get a cert from verisign or someone like that. If you get the friendly warning dialog on the first installer screen rather than the scary one with lots of red x's, you should then see your image

Custom icons not showing up when I drag a folder into the dock

I have a dock in 10.6 (on the left side, going vertical, if that matters). I've dragged a few folders into it, each containing Aliases to various programs. I've set custom icons on these folders, so I can tell at a glance what's in each folder (since it won't fan out for a vertical dock). But even after I rebooted, the dock isn't showing my custom icons but rather kind of an overlay of the various icons in each folder. What am I doing wrong?
Mike

Right-click on the Dock icon>choose Display as Folder

Some custom icons not showing up in Launchpad

I know this is a strange question to ask on official help forums - but with the decline of MacThemes, resources have been difficult to come by.
The situation: I am theming my Mavericks icons both manually and with the latest version of CandyBar as of 11/9/2013. iTunes does not seem to want to change its icon in LaunchPad.
What I've tried: CandyBar, Manually theming, log out, reboot
Any suggestions?
Thanx
Tim

Hi there,
i don't know if it' still actually your current problem, but maybe you should try this solution like this blog shows up to its readers:
http://idevicedailys.com/os-x/howto-use-candybar-os-x-mavericks/
There it is described how you could still use the app "CandyBar" on Mavericks.
Greetz
Markus

Help my buddies custom icons dont show up only the aim guy does

idk y but my buddies custom icons dont show up anymore only the aim guy does eomoen plzzz help me

If you have more than one iChat account, like a mac and an AIM screen name, each of them only displays the buddies and their details that you have added whilst logged in with that account. You can check quickly if your other account displays the list as you were expecting by selecting the iChat drop down menu>accounts and check if you have more than one.
If not, please post again.
This is always handy to trouble shoot:
http://a1408.g.akamai.net/7/1408/7780/20060628/www.mac.com/st/1/learningcenter20 060607/print/Tiger/UsingiChat_to_Communicate_Over_theInternet.pdf

Button Icons not show in Form 11g run time

Button Icons not show in Form 11g
I installed the following tools :-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle Portal,Forms,Report,and Discoverer Services (11.1.1.4.0)
1. Create a "icons" folder and place all gif images in there :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\<icons>
2. Within icons i made a jar file of all gif images :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\icons\jar -cvf frmicons.jar *.gif
3. Copy this new jar file into :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\
4. Edit formsweb.cfg file:
imageBase=codebase
archive=frmall.jar,frmicons.jar
5. Edit Registry.dat file:
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
After doing above configuration i create a form and place an icon on the button.
Set button's icon property = Yes and give name of icon without extension.
When i run the form not display icons who configure icons.
Please give the solution how to set icons on button.
Thanks & regards,
Java console message :-
Java Plug-in 1.6.0_25
Using JRE version 1.6.0_25-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Shiv
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Forms Session ID is formsapp.8
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
Forms Applet version is 11.1.2.0
FRM-92471: unable to load image exit for iconic button item

Duplicate post. Refer to comments in Push Button Iconic not show in Forms 11g

After upgrade ios 7 and itune 11 iphone icon not showing up on itune

I've just upgraded my iphone4 to ios 7. also upgraded itunes to 11.1, but then when I connect my iphone onto my PC, the iphone icon not showing up on itune, I can only see it as a camera device on file explorer in windows8, what can I do?

Please read this :
http://support.apple.com/kb/ts1538
Hope I helped.
Donnie.

Air Play icon not showing up in menu bar. How do I fix this?

Air Play icon not showing up in menu bar. How do I fix this?

What year is the MacBook Pro from?
AirPlay: iOS and Mac

HT204380 facetime icon not showing in settings anymore

My facetime icon not showing in the main page & settings anymore...I am using an iPod touch 4th gen...please help!

thanks!

Payment from the customer is not showing in the lockbox transaction.

Hi all,
When i execute transaction code FLB1, I could not able to find lockbox and customer did the payment but it was not reflected in sap.
Payment from the customer is not showing in the lockbox transaction.
Please suggest and gide me with solution what could be the reason i am not awear of lockbox process.
Regards,
JC
Edited by: jcnaidu on Sep 17, 2010 6:41 AM

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

App icons not showing up after downloading?

Why do my app icons not show up on my iPad2? I have purchased the apps on my iPad directly. Also, I know they are there because when I search it finds them and then I can open and run them.

Jennifer-
Could the Apps be on the second page of Apps? From your Home page, wipe across from right to left to scroll to page 2.
If that is the problem, press and hold on the icon. When it starts to wiggle, you can drag it back to the first page. This can also be done from iTunes when the iPad is selected.
Fred

Pushpins not showing in preview and hence not showing on embedded map

have imported KLM file OK after finding import only works in internet explorer but when i click share and look at preview the pushpins aren't showing and the same when i embed into website just the base map .
Have i missed a process ?

Have you specified a custom icon in the KML styles? If so, is it a full URL path of a relative path. If it is a relative path then it will be looking on the Bing servers for the image where it won't be and thus will not render.
Also, collections cannot be used outside of the Bing Maps consumer site in embedded maps.
http://rbrundritt.wordpress.com

Safari 8 hover does not work over google map location pins

OS X 10.10.1, Safari 8, Java 8-25
I have always had little odd things not work when using safari on a large % of websites I visit, the latest issues are
no response when hovering over google map location pins, travel site calendars not opening or responding to mouse, drag and drop
show the item being dragged several inches away from the actual pointer, some links don't respond, missing items
or odd layout with print or pop ups going off the screen on some website pages, zooming in and out does not help. I have none
of these issues when using Firefox or Chrome. Been using Safari for 4 years now.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Forms Web - Icons not showing up

Hello,
I'm running a form on the web, and I have several iconic buttons. The Oracle Developer 2000 book says that icon image files must be in .gif format, and must reside in the same directory as the html page. So I converted my icons to .gif and placed in the required folder.
On the icon property for each button, I am not specifying a path, just the filename with no extension.
The icon is not showing up. I tried setting the icon filename via set_item_property(button_name, icon_filename, filename)
ON_NEW_BLOCK_INSTANCE and placing the path to where the html file is located. The icon will not show up.
Help?
Marie
null

Hi ,
U have to update the in registry.dat file
set default.icons.iconpath=/icons/
and map this virtual directory /icons/
in web listener setting with Physical
directory of ur Icons.
null

Packaging icon not showing up

All I have this in our ANT file
<fx:info id="inforef" title="${application.title}" vendor="${application.vendor.name}" >
<fx:icon href="${src.dir}/main/resources/icon_files/application.ico" />
<fx:splash href="http://www.celer-tech.com/images/logo_with_shadow.png"/>
</fx:info>
but when the installer is created the default java icon is show on the executable. And the installer screens all have the Java icon. How do I fix this?
And will you be able to put information in the installer screens like text?

I got a custom icon to display in a bundled app :-)
Not sure of the exact set of magic incantations I performed to make it happen, but it was something like this:
1. the <fx:icon href="location"/> seemed to be unused with respect to bundling (maybe it is used in webstart packaging or something - or maybe it is planned to be used in bundling in the future and is just not implemented - or maybe I couldn't work out the right way to specify the location).
2. the app seems to look for an icon in the location Gerhard points out => package/windows/XXX.ico
3. the build.xml file for Ensemble (2.2b17 example) has a note in it: note that for native package customizations to work: jfx-impl.xml have to include "." on classpath when it loads javafx ant tasks (search for taskdef). NOTE: if NB converted project file to the newer format then you may need to correct taskdef in the nbproject/jfx-impl.xml - simply add ".:" in front of classpath value
4. I was using a NetBeans 7.2 preview and it did convert the file so I added the .: to the path in jfx-impl.xml as the note in Ensemble said.
5. Ensemble sample had a file in package/windows/ensemble2.ico
6. However, when I ran the build fx:deploy task with an verbose="true" attributed, it reported that it was looking for package/windows/ensemble.ico
7. No idea how the build knew that the name of the icon should be ensemble.ico.
8. So I renamed package/windows/ensemble2.ico to package/windows/ensemble.ico
9. Then I reran the ant task and it packaged the ensemble app with a little toaster icon for the install exe rather than the default icon.
10. It wasn't perfect as there is another icon displayed on the installer window which was still a default app icon, but perhaps you also need to set the [setup dialog icon] (add package/windows/XXX-setup-icon.bmp to the class path to customize) Gerhard also pointed out (didn't try that).
11. I'm going to guess that the last file which Gerhard points out (the .iss one) is an InnoSetup script as documented in the Inno Setup Help http://www.jrsoftware.org/ishelp/ and is the thing which allows you to change dialog wordings, text and languages - customizing the setup installer as you see fit (but that is just a guess at this stage - haven't done enough investigation to confirm).

Custom icons not showing in Google Maps

Similar Messages

Maybe you are looking for