Custom Infotype Creation in ORG Management

Vijay,
Can you send me the steps so I can assign the points.
Thanks,
Parina

Here are the steps that I followed:
Enter the transaction code PPCI
Enter a four digit infotype number (9nnn) and an infotype name.
Select Field Infotype
Choose Infotype Create.
Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
Press the Maintain button.
From the list of Infotypes locate the custom infotype created and select the entry for that.
Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
The screen for Change View Time Constraint would appear.
In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
Create a new entry here for your infotype and save it.
Come back to the Transaction PPCI and you are all set.
This is all I did and it worked.
Thanks,
Vijay

Similar Messages

Custom infotype creation issue

Hi Experts,
I have a requirement to create a custom infotype based on certain conditions. But there is a problem while saving data in the infotype. The infotype is populated from another infotype automatically through dynamic actions.
But while saving the data for the first time it happens as per the requirements and data gets saved properly.
But when the data is saved for the second time for the same pernr , the previous data is over written even though the new record starts with a different begin data.Also i have created the infotype with time constraint '1'.
can you please let me know if i am missing anything while creating or is this a logic issue .? all the logic has been coded in the flow logic part of the screen.
also if i dont save the data in the infotype it does not pop up any message like 'data not saved' which usually happens with every infotype. Please clarify me on this as well...
Thanks,
Raj Thilak.

Hi,
Check the logic how it is updating the custom infotype . I think it is nothing to do with creation of custom info type
Regards
Krishna

Problem in creating help input for custom infotype creation

Hi,
I had the task of creating a custom infotype for storing recruitment test result.
I created it using the following structure:
Component ______________Data Element
TEST_TYPE______________ZTEST_TYPE
TEST_DATE
LOCATION
PIC_____________________RFPER
EX_PIC
TEST_RESULT____________ZRESULT_TYPE
STATUS_________________ZSTATUS_TYPE
OTHER_POSITION_________PLANS
Now for the component other_position for the entry help i use is H_T528B with check table T528B. My objective is, when the infotype is accessed through pa30 and user is inputting the entry, when they press F4 on the inputbox for other_position, help search should show the list of all position within the system. But rather than that, the input help display such message:
No values selected
Maintain entries?
Yes No Cancel
When I choose yes, the input help suddenly prompt me to "Choose customizing project" which i believe is from SPRO.
How do I fix this problem so that when I press f4, the help will shows all position within the system.
Thanks

not answered, but found another work around

Calling a custom Infotype field in Time Management PCR

Dear All,
I need to read a custom Infotype field in TM PCR to read the individual leave entitlement. In my organization there is no employee group wise or Personnel Area wise fixed entitlements for leave. Leave entitlement varies individual to individual based on the contract. We are planning to maintain the individual annual entitlement in a custom infotype n then call this information in PCR to accrue the prorated quota each month.
Is there any standard operation available which can be used to read a custom infotype field or do we need to create a custom operation or function. If so, kindly let me know how to create them.
Appreciate your early response.
Thanks & Regards
Syed

Syed,
I am not really sure about it. What I can tell you is that there is standar operation TABLE that is use to read fields from infotype. You may use that operation as a base or maybe just create some enhancement on it (I really don´t if that is possible). Check with your ABAP and have a look on operation table.
Regards,
Edoardo

Error in custom infotype creation

Hi
I have created a custom infotype IT9100 .
When I am seeing the screen layout in se51 information message
Element PSPAR-ITTXT touches or overlaps other element
ITTXT stores the infotype text
Now when I am activating my screen its showing error
Collision at target location.*
Could you please let me know how to deal with such prob.
P

Hi,
please check whether in the layout set may be those fields are overlaping.
generally i didnt get those type of messages.

Problem in Tabstrip Control in Custom Infotype Creation

Hi All,
Can any body tell me how to process with Tabstrip Control in an Custom Infotype.
Iam creating Customizing Infotype With Tabstip Control.The Tabstrip Control have 2tabs.Each tab have Custom some fields.
But iam not able activating the sample Tabstrip control.
Can u tell me how to approach to create this in Modulepool programming for my Custom Infotype.
Points wil be rewarded.
Thanks,
N.L.Narayana

Hello Swapna,
Thanks for your reply.
This is my code for tabstrip control.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
   WHEN 'BOOK'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 1.
     tabb1-activetab = 'TABS1'.
     option = '1'.
   WHEN 'SUMM'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 2.
     tabb1-activetab = 'TABS2'.
     option = '2'.
   WHEN 'POST'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 3.
     tabb1-activetab = 'TABS3'.
     option ='3'.
*CH01 start
   WHEN 'RSET'.
     tabb1-prog = 'ZAXOMM005_V1'.
     tabb1-dynnr = 4.
     tabb1-activetab = 'TABS4'.
     option = '4'.
ENDCASE.
case option.
when '1'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
   if p1_werks is initial or p1_lgort is initial or
      p1_bstar is initial or p1_gjahr is initial.
     message e000(vz) with text-001.
   endif.
ENDIF.
when '2'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
   if p2_gjahr is initial.
     message e000(vz) with text-005.
   endif.
ENDIF.
when '3'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
   if p3_gjahr is initial.
     message e000(vz) with text-005.
   endif.
    ENDIF.
*CH01 start
when '4'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
if s4_werks is initial or p4_gjahr is initial.
     message e000(vz) with text-001.
endif.
if p4_book is initial and
     p4_summ is initial.
     message e000(vz) with text-022.
endif.
   ENDIF.
endcase.
I can give you some more information.
If I execute from program it is working fine, if I execute from T.code it is not working properly.
Regards.
Krishna.

Custom infotyp creation error

Hi,
I am creating a customized infotype, when i activate the layout shows me the error message "Input/output field not defiend"
But am unable to input the check in screen painter already the field is disabled. Pls Assist. URGENT.

Hi,
For this you need to go to the change mode on the screen painter and then click on input/output field..
Or you can go directly yo the element list of your screen and check the I/O option there for that field.
Regards
Sonu Gupta

Custom infotype creation

Hi,
I need to create an infotype with custom fields. the layout is such that there are field names with checkboxes(around 10), date fields and text fields.
ex:
Asset information
                                                        quantity                 date of issue    quantity         date of return
PCs (checkbox)                              (num field)             (date field)          (num field)     (date field)
peripherals (checkbox)                  (num field)             (date field)           (num field)     (date field)
car (checkbox)                               (num field)             (date field)          (num field)     (date field)
furniture (checkbox)                      (num field)              (date field)          (num field)     (date field)
datacard (checkbox)                     (num field)              (date field)          (num field)     (date field)
Now, in the PS structure, what are the fields to be created based on the info above.
Thanks,
Munna.

First create structure P. In case of using checkbox create a field with domain X.
Create infotype with transaction PM01.
Modify dynpro fields for selecting a checkbox or other visualization like radiobuttons

Edit Org Management Infotype 1000

Hi All,
Can you suggest me how to edit the Infotype screen of Org Management Infotype 1000.
Requirement is to restrict the Org unit abbrevation without blank spaces.
eg) EAB/AB/TM MR is not allowed. It should be EAB/AB/TMMR

Hi Veer,
If you are talking about Org unit abbreviation, this can be done in any of the interfaces in Org Mgmt.
For example, you can do it in Simple Maintenance, select the org unit and rename it whether abbreviation or name of the org unit.
Best regards
Ghouse

Custom infotype - issues with conversion class - making fields display only

Hi,
I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well. Appreciate your help in this regard.
Thanks,
Kumar.

Hi Venkata,
Check this document.
This explains about custom infotype creation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
regards,
Brinda L

Custom infotype updation

Hi Expects,
I am working on custom infotype creation. In my requirement I have used table control concept where user enters multiple records and updates the custom infotype.
For a single PERNR,SUBTYPE, BEGDA and ENDDA I want to update multiple records into the infotype using table control concept.
Ex: PERNR : 25
      SUBTY: 2001
      BEGDA: 01/01/2001
      ENDDA: 12/31/2001
Here by using the function modules 'HR_INFOTYPE_OPERATION' or 'HR_MAINTAIN_MASTERDATA' I am trying to update the custom infotype where sequence number need to be increamented automatically for duplicate entries but only one record is getting updated instead of multiple records.
I have maintained the time constraint as '3'.
Please let me know the procedure to update multiple records at a time into custom infotype.
Regards,
Mahesh.

Hi,
In the custom infotype table, if their are duplicate then the sequence number field value will be created automatically for time constainst '3' but using the function module it is not creating the sequence number but using the modify statement it is working fine.
Ex: Modify PA9002 from table GT_PA9002.
Please let me know the solution for updating multiple records into a custom infotype.
Regards,
Mahesh.

About Custom Infotype

Hi Experts,
I need to copy 16 infotype to custom infoype.Please send detaild steps about custom infotype creation.
Regards,
Hari

Hi
The steps are below:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level)
Award points if helpful
Thanks
Shakir

Pa custom infptype and org management infotype creation

hi experts,
pa custom infptype and org management infotype creation
steps are same or not.
If any difference b/w both plz give me step by step procedure.
Regards,
Sandeep

PA infotype will create in PM01 everything we need fill from PM01.
OM infotype
:- 1. we need to create HRI9XXX structure.
2. PPCJ t-code u can create from this t-code.
PA INFOTYPE CREATION
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the `Employee Infotype' radio button.
4) Select the `PS Structure Infotype'.
5) Click on Create. A separate table maintenance window appears.
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on `All' push button. It takes a few moments.
10) Click on `Technical Characteristics' . Infotype list screen appears
11) Click on `Change'(pencil) button
12) Select your Infotype and click on `Detail' (magnifying glass) button
13) Give `T591A' as subtype table
14) Give `T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on `Infotype Characteristics' . Infotype list screen appears
18) Click on `Change' (pencil) button
19) Click on `New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement.
25) In the PM01 initial screen.Select `Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select `Layout Editor' and click `Change'.
27) Screen default layout appears.here you can design/modify the screen.. change the attributes of the fields. etc.
28) Save and activate. (Don't forget to `Activate at every level)
Edited by: sapabap229 on Aug 30, 2010 11:19 AM

Custom Infotype for Org Management

Hi Experts,
I Iam trying to create custom infotype to capture some infomation on an Org Management custom object and I am not sure if I can do this through PM01 because this is neither employee or applicant info but custom object info. Any idea on how to do this?

Hi,
For creating OM custom infotype you should start with transaction SE11. PM01 is only for employee and applicant IT.
Go to SE11Create structure Ex:HRI9009 Create all necessary datatypes. (fields for your IT).
Then go to PPCI enter IT name and number. then maintain Table T77I here maintain time constraint for your IT.
If you still have doubts get back to me.
Thanks and Regards,
Shilpa

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

Custom Infotype Creation in ORG Management

Similar Messages

Maybe you are looking for