Custom infotype field data in Rem. Statement

Hi,
I am trying to display a date in the Rem statement from a field
in custom infotype.Have given the table and the field and pulled
the same into the Remu. statement with conversion being Date
formatting.But the date is not reflecting in the slip.
Request suggestions on the same.
REgards
Madhavi

Hi,
You can try the same through custom program.
When you call the smart form you can pass the date in the data table and display it through payslip.
Thanks,
Sutapa.

Similar Messages

Calling a custom Infotype field in Time Management PCR

Dear All,
I need to read a custom Infotype field in TM PCR to read the individual leave entitlement. In my organization there is no employee group wise or Personnel Area wise fixed entitlements for leave. Leave entitlement varies individual to individual based on the contract. We are planning to maintain the individual annual entitlement in a custom infotype n then call this information in PCR to accrue the prorated quota each month.
Is there any standard operation available which can be used to read a custom infotype field or do we need to create a custom operation or function. If so, kindly let me know how to create them.
Appreciate your early response.
Thanks & Regards
Syed

Syed,
I am not really sure about it. What I can tell you is that there is standar operation TABLE that is use to read fields from infotype. You may use that operation as a base or maybe just create some enhancement on it (I really don´t if that is possible). Check with your ABAP and have a look on operation table.
Regards,
Edoardo

How to populate customer specific field data in table /SAPAPO/ORDFLDS

Dear Gurus,
I have explained in detail about the problem we face. I guess persons who has implemented enhancement: /SAPAPO/RRP_IO_COL in their system can help me out.
Background:
Purchase requisitions in APO is created by an idoc that comes from a legacy system using BAPI CALL FUNCTION 'BAPI_POSRVAPS_SAVEMULTI3'.
Business Requirement:
I have a business requirement where I need to populate an additional data 'Original delivery date' from the idoc during PR creation in Product view.
Development:
To achieve the above requirement, we are following the below procedure in our development system.
1. We are using enhancement: /SAPAPO/RRP_IO_COL, method: RRP_USEX_COLS_FILL_01 and RRP_USEX_COLS_GET_TEXT_01 to display an additional field 'Original delivery date' in /sapapo/rrp3 - elements view. This field is restricted to Purchase requisition (Order category: AG) only. We are planning to populate the additional data 'Original delivery date' in this customer specific field and store it in table: /SAPAPO/ORDFLDS at the time of PR creation.
2. Table: /SAPAPO/ORDFLDS is appended with the 'customer specific field'.
3. We couldnt find a document on how the data can be populated in table /SAPAPO/ORDFLDS.
4. How to polulate the live cache data in the table '/APAPO/ORDFLDS' ? ( i.e using connection parameter )?
Appreciate if you can throw me some light on this.
Thanks
Vignesh M

Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information.

Description for value help field for custom infotype field

Hi,
I`ve got to include a field in custom infotype. This field has got a value help attached to it. The values to be displayed in the value help are stored in the domain of the field(in the dictionary).
The requirement is that once I select a value from the F4 help, the description for that value should be fetched and be dispalyed on the screen.
I`m using the FM "<b>AM_READ_TEXT_ON_DOMAIN_VALUE</b>" to read the description from the domain ,but unable to make it display it on the screen.
Can anyone suggest me as what should I do for displaying the description in the custom infotype screen.
Regards,
Farhana

Hi anji,
While using the "GET_DOMAIN_VALUES", I do get all the values from the domain. But I want only description to be displayed when I select a Value for that field.Kindly help out..
Eg:
1-Individual
2-Family
Then the description should be displayed as Family when I select the value 2 from the value help.
Regards,
Farhana.

Custom infotype - field length issue

Hi experts,
We have a requirement of keeping so much free text fields in the custom infotype. However, the system doesnu2019t allow having these many fields in the PS structure. We got the information from the error description as- The maximum length of PS structures for infotypes is 1000; this is the length of the general infotype header in bytes. Could you please suggest some way to solve this issue?
Thanks,
Rahul

Give a field and try to enter some decription for large text in that field .
Create a table for that field and give F4 for that .
Maintain the text in SO10 and call that text using read_text fn module .
Try this way

Regarding Custom infotype 9006 data maintanance

Hi,
There was an error showing while creating a record for custom infotype "9006" .
This infotype cannot be maintained directly
Message no. PG170
Diagnosis
You cannot maintain this infotype directly.
Like the Archived Objects infotype (0283), it can only be maintained by the system, and not manually.
System Response
Manual maintenance is not permitted.

It seems to me as some custom code is causing this error message. Can you get an ABAPPER to debug and check where this error message is being issued?
IT 9006 is a custom infotype, therefore either the message is appearing because the infotype has been copied from a standard infotype such as 0283, or this error message has been deliberately introduced by the infotype creator.
Atleast I could not find any table where this attribute is maintained.

Transfer custom Infotype 21 data to other HR system

Hi All,
We have extended Infotype 21 to include some custom fields. Now we want to transfer this to another HR system.
We are not sure what message type to use while distribution and which user exits to change for both outbound and Inbound.
Also will one single IDOC take care of all master data and the Infotype 21 fields too.
Can anyone give me the steps we need to do for the following.
This is urgent !
Points will definitely be awarded.
Regards
Prasoon

Hi Marlies,
I did not realize at first, that it's you
What's up? Give my greetings to everyone.
Yes, indeed. And it works cross-system. Another way, of course, could be simply adding SKB1 table to the change request and transport it.
Regards,
Eli

How to make a custom infotype field the time constraint 1?????

Hello everyone I have this challenging question for gurus to answer it.
In custom created infotype for OM Ii have that field called ZZJOBID. When infotype was created I assigned the time constraint 1 for that infotype. That time constraint was base on OBJID not on ZZJOBID. Now the problem I am encountering is when I assign the 2nd ZZJOBID with time span 01011800-12319999 it overwrite the 1st assign ZZJOBID.
for the requirement reason I have to use PO10( not po03). If I change the time constraint to 3 which let me have the multiple records but I am losing the delimit and other functionality which comes with time constraint 1.

Suresh,
you are wright when you say that ' Time Constraint is for the Infotype/Subtype record and cannot be based off a field.' The OM infotype runs on bases of Object such as Organizational Unit, Job, etc... The point I was trying to draw is I am looking for a way that allow me to work via TC PO10 which run on Organizational Unit along with different ZZJOBID (with same begda and endda, if needed).

Make the Report RPUAUD00 display a custom infotype field

Hi Guys,
I have completed the creation of a custom field in Infotype 0001. However upon running the report RPUAUD00, I cannot see in the detailed output report my custom field created. I'd like to ask If I missed any procedure so I can see that custom field I created in the report RPUAUD00.
Thanks..

Hi,
You need to add the new field in the change document. Find the SPRO path below.
Tcode SPRO-> Personnel Management-> Personnel Administration-> Tools-> Revision-> Set up change document.
Br/Manas

Custom infotype with payslip data

Hi,
How to display the fields from custom infotype in HR forms. we have created a infotype P9030 from which I have to display the shift details of employees in payslip.
How I will bring the custom infotype fields in the display. We are using international payroll run T.code PC00_M99_CEDT.
Regards,
Karthik.k

Can anybody help.?

Sap hr - deleting custom infotype

Hi,
Is it possible to delete custom infotype ?
If I delete a custom infotype, will I be able to use the same code to create a different custom infotype.
Rgds,
Santosh

Hi Remi,
Thanks for your reply.
Sorry, I have taken long time to reply.
I will provide the details :
I have created custom infotype having two fields. The data is selected from the master tables. We have created few records for the period 01.04.2012 to 31.03.2013. Now, the functional team wants to add new data to the Master Tables and remove some of the existing fields from the Master. I can add new fields to the master and it will get added as f4 field help. However, if I remove the data from the Masters, there will not be entries in master for the said records.
I am referring to PRD System.
Hope I have clarified the things.
Rgds,
Santosh

Global Variable declaration in Custom Infotype

Hi All,
I need to validate a custom infotype field, where i need to check for execution times. I need to override the field value only during first time of the run(PAI logic) and there after user can choose a value of his choice.
I was looking out for Global variable to check if its first run. Can you please tell me how do i create global variable in custom infotype? The top include specified in the program is not editable, being standard (MPH5ATOP).
Thanks,

>
Sachidanand B wrote:
> Hi All,
>
> I need to validate a custom infotype field, where i need to check for execution times. I need to override the field value only during first time of the run(PAI logic) and there after user can choose a value of his choice.
> I was looking out for Global variable to check if its first run. Can you please tell me how do i create global variable in custom infotype? The top include specified in the program is not editable, being standard (MPH5ATOP).
>
> Thanks,
The system will generate an include with the naming convention ZP<Custom Infotype number>10(This program will be included in the custom infotype main program ZP<Customeinfty number>00). You can use this include for your data declarations.
Ex: if the number of the custom infotype is 9010 the generated include name will be ZP901010.
For more details check the link below
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d525ad575e11d189270000e8322f96/content.htm
Regards
Rajesh:

FreeText box in custom infotype

hi friends.
I have a requierment in which i have to give a field which can accept long text.The length should not be limited.means Free text field.
Can any one help me.
advence thanx.
chandra.....

Hi,
From the Screen design perspective ;
Try placing a Text Edit Control in the custom Infotype.
DATA line_len TYPE i VALUE 60. "--- The length you define
DATA g_editor TYPE REF TO cl_gui_textedit.
*1) ---- Create custom container control
*2) ---- Attach Text Edit to Custom container
CREATE OBJECT g_editor
EXPORTING
   parent = g_editor_container
   wordwrap_mode = cl_gui_textedit=>wordwrap_at_fixed_position
   wordwrap_position = line_length
   wordwrap_to_linebreak_mode = cl_gui_textedit=>true.
*3) Read Text in a PAI event, say Save of the Infotype:
DATA g_text TYPE string. "---- Or type TDLINE/the data type to match the size as per requirement
CALL METHOD g_editor->get_text_as_stream
EXPORTING
    only_when_modified = cl_gui_textedit=>false
IMPORTING
    text               = g_text
EXCEPTIONS
    OTHERS             = 1.
For more.. check :
[Sample code for TextEdit Control|http://www.erpgenie.com/abap/controls/textedit.htm]
[SAP Textedit|http://help.sap.com/saphelp_nw04/helpdata/en/eb/549e36cf0ecb7de10000009b38f889/content.htm]
Cheers,
Remi

SAP Query on Custom Infotypes

Dear friends,
   Is it possible to generate SAP Query on Custom Infotypes.
   As I am trying them and while creating Infogroup on my custom Infotype fields, It is not getting generated.
   Could you please suggest how to proceed.
Thanks in Advance,
Regards,
Satya.

hi,
I think its not possible to fetch custom infotype fields using SAP Query....ask your abap consultant to write a simple report...that wil do....

T582A Update Custom infotype information

Hi experts,
I created custom infotype but the table T582A does not have my custom infotype IT9009 data.
please let me know T582A is update manually Using maintenance view or it updates while creating infotype .
Please send your Suggestions.
Thanks in advance.
Regards,
Sivakumar.A

hi
Table T582A - is used for customer settings in Administration infotypes.
the info type that u created is for admistration .
Hope this will give u lead to solve ur problem
Cheers
Snehi

Custom infotype field data in Rem. Statement

Similar Messages

Maybe you are looking for