Custom Infotype for Org Management
Hi Experts,
I Iam trying to create custom infotype to capture some infomation on an Org Management custom object and I am not sure if I can do this through PM01 because this is neither employee or applicant info but custom object info. Any idea on how to do this?
Hi,
For creating OM custom infotype you should start with transaction SE11. PM01 is only for employee and applicant IT.
Go to SE11Create structure Ex:HRI9009 Create all necessary datatypes. (fields for your IT).
Then go to PPCI enter IT name and number. then maintain Table T77I here maintain time constraint for your IT.
If you still have doubts get back to me.
Thanks and Regards,
Shilpa
Similar Messages
-
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
Pa custom infptype and org management infotype creation
hi experts,
pa custom infptype and org management infotype creation
steps are same or not.
If any difference b/w both plz give me step by step procedure.
Regards,
SandeepPA infotype will create in PM01 everything we need fill from PM01.
OM infotype
:- 1. we need to create HRI9XXX structure.
2. PPCJ t-code u can create from this t-code.
PA INFOTYPE CREATION
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the `Employee Infotype' radio button.
4) Select the `PS Structure Infotype'.
5) Click on Create. A separate table maintenance window appears.
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on `All' push button. It takes a few moments.
10) Click on `Technical Characteristics' . Infotype list screen appears
11) Click on `Change'(pencil) button
12) Select your Infotype and click on `Detail' (magnifying glass) button
13) Give `T591A' as subtype table
14) Give `T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on `Infotype Characteristics' . Infotype list screen appears
18) Click on `Change' (pencil) button
19) Click on `New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement.
25) In the PM01 initial screen.Select `Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select `Layout Editor' and click `Change'.
27) Screen default layout appears.here you can design/modify the screen.. change the attributes of the fields. etc.
28) Save and activate. (Don't forget to `Activate at every level)
Edited by: sapabap229 on Aug 30, 2010 11:19 AM -
How to create the custom infotypes in Campus Management
Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful. -
Customer exit for Batch management
Hi experts,
I'm using customer exit for batch management for internal number assignment.
I need the Batch number as i mentioned below
DDMMYYB01
DD-Date
MM-Month
YY-Year
B-Block
01-Number
For this i need to give logic. How to give i'm not getting. This batch number creation will come at the time of GR.
Anybody help me?
NarenHi
Please use the user exit SAPLV01Z as I mentioned in your other thread, please go to SMOD to read its documentstion.
In SMOD, select the 'Documentation' and click 'Display', this will show the overview documentation.
Select the 'Componnet', then ciick the 'Display'. select each component and click 'Documentation Ctrl+F4) this will show the detailed documentation of them.
Best Regards.
Leon. -
Problem in adding Custom Provider for Work Management Service
Hello,
I'm facing an issue in adding custom provider for work management service. As you are aware, Work management service is a Provider model and we
can integrate with other systems by adding custom providers. So with that confidence, i have started writing a connector as mentioned below.
Step - 1: Added new provider xml in the below path
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\WorkManagementService\Providers"
Provider Name: provider.bizagitasklist
Provider XML Content:
<Provider ProviderKey="DAA52AF3-A147-4086-8C0C-82D2F83A089D" OverrideProviderKey="" Assembly="adidas.TaskProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=5d6f3e6be60a351b" > </Provider>
Step -2: Added a class which inherits "IWmaTaskProvider" and implemented the override methods.
public class BizAgiTaskListProvider : IWmaTaskProvider
public string LocalizedProviderName
get { return "BizAgiTaskListProvider"; }
public string ProviderName
get { return "BizAgiTaskListProvider"; }
public Microsoft.Office.Server.WorkManagement.CalloutInfo GetCalloutInfo(IWmaTaskContext context, string taskExternalKey, string locationExternalKey)
return null;
public DashboardExtensionInfo GetDashboardExtensionInfo(IWmaBasicProviderContext context)
return new DashboardExtensionInfo { ClassName = "SP.UI.SharePointExtension" };
public BulkEditResult HandleBulkEdits(IWmaTaskContext context, BulkEdit updates)
return null;
public TaskEditResult HandleTaskEdit(IWmaTaskContext context, BaseAggregatorToProviderTaskUpdate taskUpdate)
return null;
public void RefreshSingleTask(IWmaTaskRefreshContext context, string externalKey)
public void RefreshTasks(IWmaTaskRefreshContext context)
//context.WriteProviderCustomData(
Step – 3: Written a class to fetch the tasks from BizAgi System which has method to provide the task data.
But I’m not able to feed those tasks in the class written in Step – 2 as I’m able to find any method which will take Tasks as Input and I’m not
sure about the format of tasks.
I’m able to debug the provider, and the breakpoint hitting in only one method and two properties.
(LocalizedProviderName, ProviderName, GetDashboardExtensionInfo).
Can you please help me to proceed further in implementing the above solution?
Best Regards
MaheshHi Mahesh,
Although the implementation of work management service application is based on the provider model, I reckon the current SP 2013 RTM does not support custom providers. Only SharePoint task lists, Project server and MS Exchange are supported for now.
Regards,
Yatin -
hallow
i wont to buield infotype for org.unit
i thihnk i have to use ppci or ppcj but i dont now how
please help
regardsHi Antonio,
Why you want to separetly create Infotype for Organizational Units???
Once you create them through simple maintainince by default 1000 & 1001 will be maintained. If you create Org Unit through Expert Mode you need to maintain them mannually. And select from the Infotype Menu which ever Infotype you want to maintain.
Regards
Pavani
<b>Remainder: Points to be given on Answers</b> -
Custom Infotype for eRecruiting
Dear Experts,
We need to create a custom infotype for eRecruiting.Need some pointers to the same.
PM01 is used for PA infotypes
PPCI for OM & PD.
How should we create custom infotype for eRecruiting which starts from 5102 onwards?
Please help asap.
Regards,
SowmyaHi,
Thanks a lot Divya.
We indeed created the infotype using PPCI.
For checking purpose we assigned it to a OM object & using Transaction PP01 entered a few records just to check if it is working.
But the real test would be if we can successfully bind it to the webdynpro ABAP screen.
Regards,
Sowmya -
Problem while creation custom Infotype for HRP (Organization mgmt)
Hiii...
Newbie to HR-ABAP...
I have successfully created a custom infotype for HRP (Organization mgmt)....how can i see the infotype in t-code PP01.
Thanks
AHi
Perhaps MM11/12 can't update your custom field because you have use a data element where the flag Document change isn't setted.
Max -
Customized dashboard for Expense Management
I'm planning to implement customized dashboard for expense management ..it includes displaying the how many expenses are approved or rejected and Display the workload per user/role for “Expense Management
can u please help me outHi gaurav,
Manager's Dashboard provides near-real-time performance metrics, enabling you to monitor plant operations at a glance. These user-selected metrics let you drill-down into supporting enterprise data to quickly understand manufacturing and operational activities throughout your plant. With access to key analytical data, you can then avoid or resolve problems by quickly taking corrective action.
Some of the features and benefits of dashboards are
Revenue Managementu2014provide metrics on future cash receipts and overall revenue performance
Customer Shipment Performanceu2014display fulfillment information
Manufacturing Performanceu2014get data on your manufacturing operations
Inventory Management Effectivenessu2014provide summary information on inventory turns
Supplier Performanceu2014provide summary and detailed information on supplier performance
Cash and Capital Managementu2014display cash flow data
So depending on these you can decide which content your organization wants, as your manager also what are the things he needs everyday for analysis. Also use the concept of MIS and EIS.
Hope it will help.
Reward Point if helpful.
Thanks,
Raja -
hi friends,
could u plz tell me how to create infotype for time management?????
thanks in advance,
regards,
priya.sHi,
Check the step by step procedure to create PA/Time infotype as given in SAP help.
[http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm]
Regards,
Shrinivas -
Sample code for Org Management
Hi,
I am new to Org Management coding in HR ABAP.
Can anybody post some simple sample code for Org. Management so that I can understand the flow of coding..
Thanks and Regards,
RamHi
see the sample code using Orgn management infotypes like HRP1000 etc
report zporgr0040
line-size 108
line-count 60(1)
no standard page heading
message-id zndc.
Database Tables
tables: hrp1001, " HR Master Record (Orgn. Assignment)
pa0002, " Personal Data
t528t, " Position Texts
t527x, " Org Unit Text
t528b, " Positions
csks, " Cost Center
cskt. " Cost Center Texts
Declaration of Internal Tables
Internal Table for Orgn Object Data HRP1000
data: begin of obj_tab occurs 0,
otype like hrp1000-otype, " Object Type
objid like hrp1000-objid, " Object ID
plvar like hrp1000-plvar, " Plan Version
istat like hrp1000-istat, " Planning Status
begda like hrp1000-begda, " Begin date
endda like hrp1000-endda, " End date
end of obj_tab.
Internal Table for Active Employees data PA0000
data: begin of stat_tab occurs 0,
pernr like pa0000-pernr, " Object Type
begda like pa0000-begda, " Begin date
endda like pa0000-endda, " End date
stat2 like pa0000-stat2, " Employment Status
end of stat_tab.
Internal Table for Actual Orgn Assignment Data PA0001
data: begin of act_tab occurs 0,
pernr like pa0001-pernr, " Object Type
begda like pa0001-begda, " Begin date
endda like pa0001-endda, " End date
kostl like pa0001-kostl, " Cost Center
orgeh like pa0001-orgeh, " Org Unit
plans like pa0001-plans, " Position
natio like pa0002-natio, " Nationality
end of act_tab.
Internal Table for Orgn Data HRP1001
data: begin of org_tab occurs 0,
otype like hrp1001-otype, " Object Type
objid like hrp1001-objid, " Object ID
plvar like hrp1001-plvar, " Plan Version
istat like hrp1001-istat, " Planning Status
begda like hrp1001-begda, " Begin date
endda like hrp1001-endda, " End date
subty like hrp1001-subty, " Sub Type
sclas like hrp1001-sclas, " Type of Related Object
sobid like hrp1001-sobid, " Id of Related Object
kostl like pa0001-kostl, " Cost Center
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of org_tab.
Internal Table for Position Calculations
data: begin of org1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
objid like hrp1001-objid, " Object ID
end of org1_tab.
Internal Table for Position Calculations
data: begin of org2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count type i, " No of Positions
end of org2_tab.
Internal Table for Actual Manpower Calculations
data: begin of act1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
plans like pa0001-plans, " Position
end of act1_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act2_tab.
Internal Table for Actual Manpower Calculations(Others)
data: begin of act3_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act3_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act4_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count1 type i, " No of Positions(UAE)
end of act4_tab.
Internal Table for Actual Manpower Calculations(OTHERS)
data: begin of act5_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count2 type i, " No of Positions(Others)
end of act5_tab.
Internal Table for Vaccancies Data
data: begin of vac_tab occurs 0,
plvar like hrp1007-plvar, " Plan Version
otype like hrp1007-otype, " Object Type
objid like hrp1007-objid, " Object ID
istat like hrp1007-istat, " Planning Status
begda like hrp1007-begda, " Begin date
endda like hrp1007-endda, " End date
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
end of vac_tab.
Internal Table to store the Report Output data
data : begin of rep_tab occurs 0 ,
kostl(10) type n, " Cost Cente
plans like pa0001-plans, " Position
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of rep_tab.
Internal Table to store the Report Output data
data : begin of rep1_tab occurs 0 ,
kostl(10) type n, " Cost Cente
cnt type i, " No of Vacancies
end of rep1_tab.
Internal Table to store the Report Output data
data : begin of rep2_tab occurs 0 ,
kostl(10) type n, " Cost Cente
app_no type i, " Approved
nat_no type i, " National
exp_no type i, " Expatriate
tot_no type i, " Total
vac_no type i, " Vacancies
end of rep2_tab.
Declaration of Variables
data: v_sobid like hrp1001-sobid, " Object Id
v_sobid1 like hrp1001-sobid, " Object Id
v_sobid2 like hrp1001-sobid, " Object Id
v_sclas like hrp1001-sclas, " Related Obj Type
v_subty like hrp1001-subty, " Related Object Id
v_otype like hrp1007-otype, " Object Type
v_str(9) type c, " Text
v_str1(10) type c, " Text
v_cnt like sy-tabix. " Table Index
Declaration of Constants
constants : c_x type c value 'X', " Flag
c_stat1 like pa0000-stat2 value '3', " Emp Status
c_plan like hrp1001-plvar value '01', " Plan Version
c_name like hrp1000-uname value 'SAP', " Uname
c_uae like pa0002-natio value 'AE', " Country
c_type like hrp1007-otype value 'O', " Object Type
c_otype like hrp1007-otype value 'S', " Object Type
c_stat like hrp1007-status value '0', " Status
c_pstat like hrp1007-istat value '1', " Plang Status
c_sclas like hrp1001-sclas value 'K', " Rel. Obj Type
c_subty like hrp1001-subty value 'A002', " Related ObjId
c_subty2 like hrp1001-subty value 'A003', " Related ObjId
c_sclas1 like hrp1001-sclas value 'O', " Rel.Obj Type
c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
c_kokrs like coej-kokrs value '1000'. " Controlling Area
Selection Screen
selection-screen begin of block b1 with frame title text-001.
parameters :
p_date like pa0001-begda obligatory default sy-datum. " Date
select-options :
s_kostl for csks-kostl, " Cost Center
s_plans for t528b-plans. " Position ID
selection-screen end of block b1.
At selection-screen
at selection-screen.
Validate the Selection Screen fields
perform validate_screen.
Start-of-Selection
start-of-selection.
Get the Orgn data from database Table HRP1001
perform get_org_data.
Get the Actual Manpower from PA0001
perform get_act_data.
Get the Vaccancies data from database Table HRP1007
perform get_vac_data.
Append the data into final Internal Table
perform append_data.
Top-of-page
top-of-page.
Write the Report and Column Headings
perform top_of_page.
End-of-Page
end-of-page.
write /1(108) sy-uline.
End-of-Selection
end-of-selection.
Display the Output Report.
perform display_report.
Form-Routines
*& Form validate_screen
Validation of selection Screen fields
form validate_screen.
Validation of Position ID
clear t528b.
if not s_plans[] is initial.
select single plans
into t528b-plans
from t528b
where plans in s_plans.
if sy-subrc <> 0.
message e999 with 'Invalid Position ID'(009).
endif.
endif.
Validation of Cost Center
clear csks.
if not s_kostl[] is initial.
select single kostl
into csks-kostl
from csks
where kostl in s_kostl.
if sy-subrc <> 0.
message e999 with 'Invalid Cost Center'(008).
endif.
endif.
endform. "validate_screen
*& Form get_org_data
Get the Orgn Data from Database Table HRP1001
form get_org_data.
v_str = 'Developee'(002).
v_str1 = 'Deployment'(003).
Select All the Positions from HRP1000
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
into table obj_tab
from hrp1000
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
objid in s_plans and
uname ne c_name.
sort obj_tab by otype objid.
Get the Orgn and Cost Center for all the above Positions
if not obj_tab[] is initial.
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
subty " Sub Type
sclas " Type of Related Object
sobid " Id of Related Object
into table org_tab
from hrp1001
for all entries in obj_tab
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq c_sclas1 and
subty eq c_subty2 and
objid eq obj_tab-objid.
endif.
sort org_tab by otype objid.
Get the Cost Center
loop at org_tab.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
org_tab-kostl = hrp1001-sobid+0(10).
else.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
else.
v_otype = c_otype. " S
v_sclas = c_otype. " S
v_subty = c_subty. " A002
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
endif.
endif.
Get the Position Text
clear t528t.
select single plstx from t528t into t528t-plstx
where sprsl = sy-langu and
otype = c_otype and
plans = org_tab-objid.
org_tab-plstx = t528t-plstx.
Get the Org Unit Text
clear t527x.
select single orgtx from t527x into t527x-orgtx
where sprsl = sy-langu and
orgeh = org_tab-sobid+0(8).
org_tab-orgtx = t527x-orgtx.
modify org_tab index sy-tabix.
clear v_sobid.
endloop.
sort org_tab by otype objid.
Calculate the Approved No of Positions
loop at org_tab.
if org_tab-kostl in s_kostl.
move-corresponding org_tab to org1_tab.
append org1_tab.
clear org1_tab.
endif.
endloop.
sort org1_tab by kostl objid.
clear v_cnt.
loop at org1_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
org2_tab-kostl = org1_tab-kostl.
org2_tab-count = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append org2_tab.
clear:org2_tab.
endat.
endloop.
sort org2_tab by kostl.
endform. "get_org_data
*& Form get_act_data
Get the Actual Manpower Data from Database Table PA0001
form get_act_data.
clear : stat_tab, act_tab.
refresh: stat_tab, act_tab.
Get all the Active Employees
select pernr " Object Type
begda " Begin date
endda " End date
stat2 " Emp Status
into table stat_tab
from pa0000
where stat2 eq c_stat1 and
begda le p_date and
endda ge p_date.
sort act_tab by pernr.
if not stat_tab[] is initial.
select pernr " Object Type
begda " Begin date
endda " End date
kostl " Cost Center
orgeh " Org Unit
plans " Position
into table act_tab
from pa0001
for all entries in stat_tab
where pernr eq stat_tab-pernr and
kostl in s_kostl and
plans in s_plans and
persg eq '1' and
begda le p_date and
endda ge p_date.
endif.
sort act_tab by pernr.
loop at act_tab.
move-corresponding act_tab to act1_tab.
clear pa0002-natio.
select single natio into pa0002-natio from pa0002
where pernr = act_tab-pernr.
if sy-subrc = 0.
act1_tab-natio = pa0002-natio.
endif.
append act1_tab.
clear act1_tab.
endloop.
sort act1_tab by kostl natio.
Calculate the Local and Expatriate Manpower
loop at act1_tab.
if act1_tab-natio = c_uae.
act2_tab-kostl = act1_tab-kostl.
act2_tab-natio = act1_tab-natio.
else.
act3_tab-kostl = act1_tab-kostl.
act3_tab-natio = act1_tab-natio.
endif.
append: act2_tab, act3_tab.
clear : act2_tab,act3_tab.
endloop.
sort act2_tab by kostl.
sort act3_tab by kostl.
Actual UAE Manpower
clear v_cnt.
loop at act2_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act4_tab-kostl = act2_tab-kostl.
act4_tab-count1 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act4_tab.
clear:act4_tab.
endat.
endloop.
sort act4_tab by kostl.
Other Countries
clear v_cnt.
loop at act3_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act5_tab-kostl = act3_tab-kostl.
act5_tab-count2 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act5_tab.
clear:act5_tab.
endat.
endloop.
sort act5_tab by kostl.
endform. "get_act_data
*& Form get_org
Get the Cost Center from Parent Org Id
form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
clear hrp1001.
select single * from hrp1001
where otype = p_v_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq p_v_sclas and
subty eq p_v_subty and
objid eq p_v_sobid.
v_sobid = hrp1001-sobid+0(8).
endform. " get_org
*& Form get_vac_data
Get the Vaccancies Data from Database Table HRP1007
form get_vac_data.
if not org_tab[] is initial.
select plvar " Plan Version
otype " Object Type
objid " Object ID
istat " Planning Status
begda " Begin date
endda " End date
vacan " Vacancy Indicator
status " Status of Vacancy
into table vac_tab
from hrp1007
for all entries in org_tab
where plvar = c_plan and
otype = c_otype and
istat eq c_pstat and
objid = org_tab-objid and
begda le p_date and
endda ge p_date and
vacan eq c_x and
status eq c_stat.
endif.
sort vac_tab by plvar otype objid.
Get the HR data into the rep_tab Internal Table
loop at vac_tab.
rep_tab-plans = vac_tab-objid.
rep_tab-vacan = vac_tab-vacan.
rep_tab-status = vac_tab-status.
read table org_tab with key objid = vac_tab-objid.
if sy-subrc = 0.
rep_tab-kostl = org_tab-kostl.
rep_tab-plstx = org_tab-plstx.
rep_tab-orgtx = org_tab-orgtx.
endif.
append rep_tab.
clear rep_tab.
endloop.
loop at rep_tab.
if not rep_tab-kostl in s_kostl.
delete rep_tab index sy-tabix.
endif.
endloop.
sort rep_tab by kostl plans.
delete rep_tab where plstx cs v_str.
delete rep_tab where orgtx cs v_str1.
Calculate the Count of Vacancies in each Division
clear v_cnt.
loop at rep_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
rep1_tab-kostl = rep_tab-kostl.
rep1_tab-cnt = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append rep1_tab.
clear:rep1_tab.
endat.
endloop.
sort rep1_tab by kostl.
endform. "get_vac_data
*& Form append_data
Append the data into final Internal Table
form append_data.
loop at org2_tab.
rep2_tab-kostl = org2_tab-kostl.
rep2_tab-app_no = org2_tab-count.
read table act4_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-nat_no = act4_tab-count1.
endif.
read table act5_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-exp_no = act5_tab-count2.
endif.
read table rep1_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-vac_no = rep1_tab-cnt.
endif.
rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
append rep2_tab.
clear rep2_tab.
endloop.
sort rep2_tab by kostl.
endform. "append_data
*& Form top_of_page
Write the Report and Column Headings
form top_of_page.
skip.
format color col_heading on.
write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
/1(108) 'Summary of Manning Level Report'(011) centered.
format color off.
skip.
write: /2 'Key Date :'(013), p_date,
75 'Report Run Date:'(041), sy-datum.
if not s_kostl[] is initial.
if s_kostl-high is initial.
write: /2 'Cost Center :'(023), s_kostl-low,
75 'Time :'(042), sy-uzeit.
else.
write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
'To'(022), s_kostl-high,
75 'Time :'(042), sy-uzeit.
endif.
else.
write: /75 'Time :'(042), sy-uzeit.
endif.
if not s_plans[] is initial.
if s_plans-high is initial.
write: /2 'Position Id :'(019), s_plans-low,
75 'User :'(043), sy-uname.
else.
write: /2 'Position Id From:'(021), s_plans-low,
'To'(022), s_plans-high,
75 'User :'(043), sy-uname.
endif.
else.
write: /75 'User :'(043), sy-uname.
endif.
write: /75 'Page No :'(044), sy-pagno.
skip.
write /1(108) sy-uline.
format color col_heading.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(32) 'Actual'(018) centered,
97 sy-vline,108 sy-vline.
write:/1 sy-vline, 2(10) 'CostCenter'(014),
12 sy-vline, 13(40) 'Description'(026) centered,
53 sy-vline, 54(10) 'Approved'(025) centered,
64 sy-vline, 65(32) sy-uline,
97 sy-vline, 98(10) 'Vacancies'(017),
108 sy-vline.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(10) 'National'(015) centered,
75 sy-vline, 76(10) 'Expatriate'(020) centered,
86 sy-vline, 87(10) 'Total'(016) centered,
97 sy-vline,108 sy-vline.
format color off.
write /1(108) sy-uline.
endform. "top_of_page
*& Form Display_report
Write the Report Output
form display_report.
if rep2_tab[] is initial.
message i999 with
'No Data found for the entered Selection'(035).
else.
loop at rep2_tab.
Authorization Check for the Orgn and Cost Centers
perform auth_check_org.
if sy-subrc = 0.
clear cskt.
select single ltext into cskt-ltext from cskt
where spras = sy-langu and
kokrs = c_kokrs and
kostl = rep2_tab-kostl.
format color col_normal.
write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
12 sy-vline, 13(40) cskt-ltext,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
at last.
sum.
format color 3.
write /1(108) sy-uline.
write: /1 sy-vline, 2(10) 'Total'(027),
12 sy-vline,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
endat.
endif.
endloop.
endif.
write /1(108) sy-uline.
endform. " Display_report
*& Form auth_check_org
Authorization Check for the Orgn and Cost Center
form auth_check_org.
authority-check object 'ZNDCHROM'
id 'PLVAR' dummy
id 'OTYPE' dummy
id 'KOSTL' field rep2_tab-kostl.
endform. "auth_check_org
<b>Reward points for useful Answers</b>
Regards
Anji -
Custom reports for servers managed by administrators
Hi,
I'm trying to create a report using the report builder but I need some helps. First I have added the attribute "Managedby" in my system discovery method.
Now i want to create a report that display the server name, the OS, and the managed by attribute. How can I do that ?
any helps ?Here are few links that should get you started with reporting:
http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
https://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Basically you need to find out where the ManagedBy -data is stored, probably in v_R_System like noted here:
http://www.systemcenterdudes.com/add-custom-active-directory-attribute-sccm-inventory/ -
Custom infotype for submodule 'RE'
I am new to SAP HR module . i have created a custom infotype through PM01 for sub module RE. but when iam going to create master data for this custom infotype using PB30 , system creates dump with following error message " Access via 'NULL' object reference not possible."
Thanks
SarathHi,
Thanks a lot Divya.
We indeed created the infotype using PPCI.
For checking purpose we assigned it to a OM object & using Transaction PP01 entered a few records just to check if it is working.
But the real test would be if we can successfully bind it to the webdynpro ABAP screen.
Regards,
Sowmya -
How can we create subtypes for om custom infotypes
hi,
I want the detailed procedure how to create Subtypes for Organzational management custom infotypes.
Pls send me the detailed path how to create Subtypes for Org management.
thanks & regards,
Sekhar.Access transaction SM30/31 for table maintenance. Enter view name V_778U.
Select maintain and enter the subtype for the custom infotype.
Also remember to enter the time constraint for the subtypes mainatined in table T777Z.
SPRO Path
Personnel Management --> org management --> basic settings --> data model enhancement --> infotype maintenance --> maintain subtypes.
Regards
Ravikumar
Maybe you are looking for
-
How to solve: Error while trying to synchronize Audio and MIDI.
The project consists of an hour long DVD of a play which I have loaded into Logic ( on a MacbookPro) and stripped the audio and cut it up into regions to name the different parts of the play ( verse/music etc) Usually I am able to play the project w
-
FBV1 error - Transaction Type 030 not possible
Hi SAP experts, I am currently facing an issue while in FBV1 (via batch input) It displays error message Transaction Type 030 not possible (posting to affiliated company), however, the asset group that it belongs to can only be Type 030 (Acquisition
-
Installing photoshop elements 12
I have tried several times to install this program- i have downloaded both files (.7z & exe) to the same folder. exe has installed, but when i try to start the program i get a log in pop up- which i do log in- then the window disappears and nothing h
-
Exchange 2010 Certificates, IPs, and Domain Names...
I'm setting up a new Exchange 2010 server, migrating from an old Exchange 2003. I'm at the point now where I'm stuck and cannot move the mailboxes of the users to the new server until I get the new server setup with certificates, reconfigure the fire
-
HOW TO FIND OUT THE MODEL NO IN MY HAND SET
PLEASE HELP