Custom Infotype : Only for Disply Mode Change and Create Should be disable

Dear Experts,
I Created a custom infotype in PM01 for Exit process , my client requirement is this infotype only shows the details .
Could you please tell me how to disable the Create and change button in PA30 Screen ?
Regards,
Sivakumar.A

hi siva
In PM01 itself you have option module pool, select that option go to screen program.
there select field->dbl clk-> screen attributes pop up will come.
there you have to change the input/output option
Regards
Deva

Similar Messages

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

Logs for 'Operating mode' change in mirroring

Logs for 'Operating mode' change in mirroring
Hi Everyone,
Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
Regards,
Aspet
A.G

Try looking into trace log files
DECLARE @filename VARCHAR(100), @filenum int
SELECT @filename = CAST(value AS VARCHAR(100))
FROM fn_trace_getinfo(DEFAULT)
WHERE property = 2
AND traceid = 1
AND value IS NOT NULL
SELECT @filename
SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
SELECT @filename
SELECT gt.EventClass,
te.Name AS EventName,
gt.TEXTData,
gt.NTUserName,
gt.NTDomainName,
gt.HostName,
gt.ApplicationName,
gt.LoginName,
gt.SPID,
gt.StartTime,
gt.EndTime,
gt.ObjectName,
gt.DatabaseName,
gt.FileName
FROM [fn_trace_gettable](@fileName, DEFAULT) gt
JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id
WHERE EventClass = 116
AND TEXTData LIKE '%Alter
database%'
ORDER BY StartTime;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance

Infotype only for pa40, not for pa20/30 ???

Hello,
How to set an infotype to be available only for pa40, not for pa20/pa30?
J can programm it in PBO and check the transaction code, but I look for another solution, maybe in spro.
Regards,
Piotr

Hi.
I have got a doubt after reading ur question.
PA40 is for Personnel Actions.
PA30 is to maintain master data.
PA20 is to display master data.
so is it possible to set infotypes only for PA 40, and not for PA30/20

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to be

My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to being offline will the location still be sent to me? And also, how can I retrieve my pictures from my iCloud?

Anything is possible.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

I bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.

i bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.
REGARDS
RISHABH AULIYA

Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/
ipod repair options - https://discussions.apple.com/thread/3900047 and https://discussions.apple.com/message/18867033
Service Answer Center - iPod - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=ipod <-- enter correct country once on page.

I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.

I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please help!

I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Fife days App Store not give it to me the verify code, I made I lot email adress, changed and create the new, still the same problem, and this is second one iPad that I bought this month, if not help me I don't know how to deal, thank you in advance

Fife days App Store not give it to me the verify code, I made I lot email adress, changed and created the new, still the same problem, and this is second iPad that I bought this month, if not help me I don't know how to deal, thank you in advance, maybe I will go to shop and want my money back

Do you have a technical question for us volunteer users?

Hi there, I currently subscribe to Adobe Pro Subscription (yearly) and I also subscribe to Adobe PDF pack (monthly). I only require Adobe to read and create PDF documents such as converting word/excel document or a web based document. Can someone tell m

Hi there, I currently subscribe to Adobe Pro Subscription (yearly) and I also subscribe to Adobe PDF pack (monthly). I only require Adobe to read and create PDF documents such as converting word/excel document or a web based document. Can someone tell me if I'm doubling up as I'm not sure of the differences between the products and would like to save a few dollars.

Acrobat Pro can do a lot more than the PDF Pack online service.
Try if you can do everything you need with PDF Pack; otherwise keep Acrobat Pro.

Updating Custom Table Only in Debug Mode

Hi All!
I have been encountering issues in updating a custom table. It would work successfully only in debug mode otherwise it won't update an entry in the table.
This is the piece of code that would update an entry in the table specifically used in a user exit. The functionality of this code is to automatically remove a transportation block:
SELECT SINGLE *
INTO wa_zblock
FROM zblock
WHERE zzblknum EQ c_tr01
AND vbeln EQ p_lvbeln
AND zzprocessed EQ space.
IF sy-subrc EQ 0.
DO.
CALL FUNCTION 'ENQUEUE_E_TABLES'
EXPORTING
MODE_RSTABLE = 'S'
TABNAME = c_lzblock
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
IF sy-subrc EQ 0.
wa_zblock-zzprocessed = c_x.
wa_zblock-zzapproveby = sy-uname.
wa_zblock-zzapproveon = sy-datum.
MODIFY zblock FROM wa_zblock.
if sy-subrc EQ 0.
COMMIT WORK AND WAIT.
endif.
EXIT.
ENDIF.
ENDDO.
CALL FUNCTION 'DEQUEUE_E_TABLES'
EXPORTING
MODE_RSTABLE = 'S'
TABNAME = c_lzblock.
ENDIF.
How can I make this update the custom table successful in undebugged mode? Please let me know your thoughts on this.
Thanks!

I also suggest you to lock only the entry that will be updated (and not the whole table!) : you will have then far less problems of conflict with updating this table.
For that, you have to create a lock object on your table (via SE11 - for example EZ_MY_TABLE). This will create 2 function modules named ENQUEUE_E<name of your lock object> (in my example ENQUEUE_EZ_MY_TABLE) and DEQUEUE_E<...>.
You can then call those FM like this :
CALL FUNCTION 'ENQUEUE_EZ_MY_TABLE'
EXPORTING
    MODE_RSTABLE = 'S'
    KEYFIELD1 = ld_keyfield1 " Here are the key values for the entry that you have to update
    KEYFIELD2 = ld_keyfield2
EXCEPTIONS
    FOREIGN_LOCK = 1
    SYSTEM_FAILURE = 2
    OTHERS = 3.
Best regards,
Samuel

Question about X-Fi mode changes and relay clicks

Hello,
I've been having a heck of a time getting my new x-fi elite pro to work nicely in my computer (I have an MSI K8N neo4 platinum -- nforce4 chipset -- I'm aware of the issues). I kept having issues with the mode changer not working right about 50% of the time. Either it would stop recognizing my x-fi, or the SPI process would crash. In either case I could no longer change modes and the external box would stop working until a reboot. I tried many, many PCI slot swaps and driver reinstalls. Currently, things seem to be working ok (at least as far as mode switching goes...ASIO is another story) in that I can change modes without crashes...at least for the last half hour or so.
The only thing bothering me is that now, when I change modes, I almost never hear the relay click. Maybe out of 20 mode changes I get the click. Before, when the mode would successfully change, I'd always hear the click. Now, that's not the case. I'm wondering if the mode changing is really working correctly even though I'm not getting any crashes. So, my question to others is, when you change modes, do you always hear the relay click? I'm trying to get this all figured out before I decide to send it back. ASIO drivers work in creation mode, my cmss settings show up right in entertainment mode, etc...so maybe it's working right. I'm just not sure.
Thanks in advance.

Nevermind.... I rebooted for the heck of it. The relays clicked every time until I went into audio creation mode and actually used the ASIO drivers. Then, I tried to switch back to entertainment mode and SPI crashed on me again. I think it's about time to send this thing back, I've wasted about 2 hours trying to get this thing to work right.
Thanks anyway.

Transport request for table changes is asked only for first row changed

Hello,
We have created a maintenance dialog connected to a custom table.
In the Table Maintenance Diagog, the <i>Dialog Data Transport Details</i> is set to <i>Standard Recording Routine</i>.
In the "Maintenance Objects" screen, the transport is set to "Automatic transport".
Two questions:
1. Now can I only change the table's entry through SM30? I do not see the "pencil" icon in SM11 or SM16 anymore. Is there a way to change the table's rows in both ways?
2. When I change a row in my table through SM30, the system only asks for the CR number the FIRST time that I savea changed row. When I change other rows and save them, it does not ask for any CR that I want to use for transport. Does it mean that the system automatically knows where to put the transported rows? or that the configuration is wrong and the other changed rows will not be taken into consideration? What if I want to change the CR for only some of the changed rows?
Thank you very much every expert here

HI,
The table should be Customizeed table, i mean in the Attributes of the tabl eput it as C,
1) We can change/Insert the records from SM30, we can not ahve the pencil icon in SE11 or SM16
2) If you put the table type C, then for every entry it should ask the CR, if not then it is moving to the same request automatically
Regards
Sudheer

Custom Infotype : Only for Disply Mode Change and Create Should be disable

Similar Messages

Maybe you are looking for