Custom infotype pqah report issue...

Dear Friends,
For custom infotype In PQAH report generation we are getting message as u201CError when generating the report (see long text)u201D.Is there any restriction for field lengths & characters in report generation. Please give me a solution about this issue.
Thanks in advance,
Satya

Dear Friends,
We have total 27 output fields in this custom infotype. If I will select some output fields in that custom infotype pqah report is generating. But if I will select all out put fields that specific infotype then system is showing that error message in report generation.
Thanks in advance,
Satya

Similar Messages

Custom infotype - field length issue

Hi experts,
We have a requirement of keeping so much free text fields in the custom infotype. However, the system doesnu2019t allow having these many fields in the PS structure. We got the information from the error description as- The maximum length of PS structures for infotypes is 1000; this is the length of the general infotype header in bytes. Could you please suggest some way to solve this issue?
Thanks,
Rahul

Give a field and try to enter some decription for large text in that field .
Create a table for that field and give F4 for that .
Maintain the text in SO10 and call that text using read_text fn module .
Try this way

Currency config for Custom Infotype

Hi Guru's,
Can any one guide me how to config the currency for Custom infotypes.
Regards,
Reddy

Hello,
If I was to do it and under the exposed conditions I would have to make a batch input report that would create a cut in your infotype from the currency change start date and record - convert all previous record to new currency.
There is a few standard program created back when the euro came into play that you could have a look at so to replicate behavior for your custom infotype. Report is RPUEMU00, you could have a look at subroutines PROCESS_INFOTYPE_TABLES, PROCESS_PA0015, or maybe just custom abap logic will suit you better.
Cheers.

Custom infotype creation issue

Hi Experts,
I have a requirement to create a custom infotype based on certain conditions. But there is a problem while saving data in the infotype. The infotype is populated from another infotype automatically through dynamic actions.
But while saving the data for the first time it happens as per the requirements and data gets saved properly.
But when the data is saved for the second time for the same pernr , the previous data is over written even though the new record starts with a different begin data.Also i have created the infotype with time constraint '1'.
can you please let me know if i am missing anything while creating or is this a logic issue .? all the logic has been coded in the flow logic part of the screen.
also if i dont save the data in the infotype it does not pop up any message like 'data not saved' which usually happens with every infotype. Please clarify me on this as well...
Thanks,
Raj Thilak.

Hi,
Check the logic how it is updating the custom infotype . I think it is nothing to do with creation of custom info type
Regards
Krishna

How to push custom infotype details to Standard Log Report

Hi Experts,
i am using S_AHR_61016380 SAP Standard Report for Log Change Data in
the report development. However, the standard report for logged changes
does not capture the long term documents run for the custom infotype.
it is only giving the logged changes for the standard SAP infotypes
and it doesnot capture any details for the custom infotype.
We are looking a possibility on how to push custom infotype details to S_AHR_61016380.
Pls suggest in case you have any inputs for the same.
Thanks & Regards,
Kishore.

Hello Amith,
As u said i have created a Z program, and also i have used the following FMs.
1. 'HR_INFOTYPE_LOG_GET_LIST'
2. 'HR_INFOTYPE_LOG_GET_DETAIL'
Using these FMs i am able to get log records from the standard infotypes but i am unable to fetch data from the custom infotype tables.
Please give me any solution to read the log records from the custom infotype tables.
Thanks,
Kishore

Issue while modifying entries in custom infotype after enhancement.

Hi All ,
I have enhanced custom Infotype (Added 2 new fields).
After enhancement, I am facing one issue while updating infotype through FM HR_INFOTYPE_OPERATION.
Issue is that I am not able to update/modify records through FM HR_INFOTYPE_OPERATION.
RETURN parameter of FM comes empty indicating no errors but actual records in database table are not updated. I debugged FM and found that SAVE button on PA30 screen is disabled.
Anyone knows reason for above proble and also please help me in solving issue.
Regards,
Jigar Thakkar.

Thanks for your response.
Yes i am able to update IT9201 through PA30 but not with FM HR_INFOTYPE_OPERATION. Also I have activated PXXXX structure through PM01.
While debugging FM HR_INFOTYPE_OPERATION i saw that SAVE button is disabled and processing stops there.
Regards,
Jigar.

HR Custom InfoTypes problem when added to custom Infoset Report for PA

Hi, I am having an issue with the adhoc query /SAPQUERY/HR_ADM. I added the custom infotypes 9* I created to this standard infoset by using SQ02 and adding these by going into the menu path Edit--> Change InfoType selection. I regenerated this object and attached to a transport. The query runs fine in the DEV system where I made the change...I can choose fields for output or selection from the standard infotypes and custom infotypes as expected. I migrated this transport to the test system and now when I try to do the same thing I get an error when I try to click on any object in my custom infotype and some of the standard infotype. I tried regenerating and resending to the test system and still have the same issue. This is the error in the dump:
    79 * create work area
    80   create data data_wa like line of data_table.
    81   assign data_wa->* to <data_wa>.
    82   assign component fcat_wa-fieldname OF STRUCTURE <data_wa>
    83     to <field>.
    84
    85   loop at t_fcat into fcat_wa.
    86     field_filled = 'X'.
    87     assign component fcat_wa-fieldname OF STRUCTURE <data_wa>
    88     to <field>.
    89     if sy-subrc <> 0.
>>>>>       raise internal_error.
It appears the TEXT488 is the value in the fcat_wa-fieldname and I do not see this in the data_wa.
Does anyone know how to fix this problem or what I might try or look at to see what the difference is between the DEV system (where it works ok) the the Test system where it is giving me an error?
Thanks in advance for any help you can provide.
Laurie

After further investigation I found the problem to this was in the generation of the objects. Even though I generated before attaching to a transport and all looked ok, there is some sort of bug causing it to not generate properly so I had to sign on to each environment and generate the object in SQ02 including in Production. After I did this the custom infotypes were accessible in the Infoset.

Calling custom Infotype method from ABAP report

Hi Experts,
I am working on an application where i need to call a method of a custom defined infotype.
I have done this -->
1. Create a custom infotype 9111
2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
i want to call methods IF_HRPA_INFTY_BL~MODIFY,
IF_HRPA_INFTY_BL~INSERT
However when i call these method from abap report this method does not work.
where as when i try to insert an entry using PA30 transaction it works.
Does anyone know why does this happen and what is the solution?
Regards,
Ashish Shah

Hi,
This is the code we are using. Just calling the read and modify methods of the check class. Very simple actually .. we just want once update/insert to work but it does not.
<CODE>
REPORT ZTESTRAD_WD.
FIELD-SYMBOLS <p9106> TYPE p9106.
DATA : infty_container_tab TYPE hrpad_infty_container_tab ,
       message_list        TYPE REF TO cl_hrpa_message_list,
     w_ok type boole_d ,
     ref_class TYPE REF TO ZCL_HRPA_INFOTYPE_9106,
     container        TYPE REF TO if_hrpa_infty_container,
     it9106_container TYPE REF TO cl_hrpa_infotype_container,
     p9106_ref        TYPE REF TO data,
    busilog type ref to if_hrpa_masterdata_bl.
CREATE OBJECT message_list.
TRY.
        CREATE OBJECT ref_class
          EXPORTING
            tclas = 'A'
            infty = '9106'.
      CATCH cx_hrpa_violated_assertion .
        write :/ 'Error during initialization'.
ENDTRY.
call method cl_hrpa_masterdata_bl=>get_instance
   importing
     masterdata_bl = busilog.
TRY.
CALL METHOD ref_class->IF_HRPA_INFTY_BL~read
EXPORTING
    tclas           = 'A'
    pernr           = 'XXXXXXXX'
    infty           = '9106'
    begda           = sy-datum
    endda           = sy-datum
    no_auth_check   = abap_true
    message_handler = message_list
IMPORTING
    container_tab   = infty_container_tab
    is_ok           = w_ok.
CATCH cx_hrpa_violated_assertion .
   WRITE :/ 'Infotype could not be read'.
ENDTRY.
*" Fill the local structure with container data:
loop at infty_container_tab into container.
    it9106_container ?= container.
    TRY.
    CALL METHOD it9106_container->primary_record_ref
      IMPORTING
        pnnnn_ref = p9106_ref.
     CATCH cx_hrpa_violated_assertion .
    ENDTRY.
    ASSIGN p9106_ref->* to <p9106>.
    write :/ <p9106> .
endloop.
*" Just change some field values of the record
<p9106>-C1name2 = 'Test name'.
<p9106>-C2name2 = 'Test name 2 3 4'.
data : return TYPE BAPIRETURN1,
       return1 TYPE BAPIRETURN1.
*CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
   number        = <p9106>-pernr
IMPORTING
RETURN        = return1
*PERFORM do_nothing(sapfp50p).
The container itself is modified
container ?= it9106_container->modify_primary_record( <p9106> ).
CREATE OBJECT message_list.
the invocation - errors are always fatal !!!
DATA : lx_exception TYPE REF TO cx_root,
         update_mode type HRPAD_UPDATE_MODE,
         massn type massn,
         massg type massg.
TRY.
      CALL METHOD ref_class->IF_HRPA_INFTY_BL~MODIFY(
        EXPORTING
           old_container =                   it9106_container
           massn                          = massn
           massg                         = massg
           update_mode =                 update_mode
           no_auth_check =                   'X'
           message_handler =                 message_list
        IMPORTING
           is_ok =                           w_ok
        CHANGING
           container =                       container
    CATCH cx_hrpa_violated_assertion INTO lx_exception.
      RAISE EXCEPTION TYPE cx_wd_no_handler
        EXPORTING previous = lx_exception.
ENDTRY.
</CODE>
I have also tried by instantiating the cl_hrpa_masterdata_bl and then calling the methods on that object...... makes no difference.
I used this link to proceed with the modifications:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm
The funny thing is that the WHOLE logic executes without any error messages or dumps or anything. I have now debugged almost every line of code that these methods call. PA30 works just fine. HR_INFOTYPE_OPERATION does not .. that's a whole differnt story.

About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

Validation Issue in Custom Infotype

I have Copied an Infotype from 0582 . so it created an custom database table PA9***. After final completion during testing the user are creating the records and saved and it is working fine till now. The Problem is when users try to change the same Record that is just created , the information is not getting updated , the system also gives an information message 'No Changes Found' inspite of obvious changes. I Verified the information from both data base table and end user screen, it is not getting updated in neither of the Places. Please Help. any Further Information needed ask Me.

Hi Shanthi,
I am having the same problem.
I had created a custom infotype ,But when I try to view it through PA30 in Display mode.
the fields are still enabled.
Whereas , in create mode, its working fine.
Please guide me the steps to disable the fields in Display mode in PA30.
Thanks
Kanupriya.

Custom infotype - issues with conversion class - making fields display only

Hi,
I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well. Appreciate your help in this regard.
Thanks,
Kumar.

Hi Venkata,
Check this document.
This explains about custom infotype creation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
regards,
Brinda L

To trigger ADOBE form from Custom Infotype

hello,
I hae create d ADOBE form and want to trigger it on "Save" record from Custom Infotype....
I need this form to be displied as User my do some changes and save it again...
I have used following code to trigger this from module pool...
Data : lv_fm_name type rs38l_fnam.
Data : gs_sfpoutputparams type SFPOUTPUTPARAMS,
       gs_sfpdocparams TYPE sfpdocparams,
       gs_formoutput TYPE fpformoutput.
Set output parameters and open spool job
gs_sfpoutputparams-nodialog = 'X'. " suppress printer dialog popup
gs_sfpoutputparams-GETPDF = 'X'. " launch print preview
call function 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = gs_sfpoutputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      others          = 5.
First get name of the generated function module
call function 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = 'Z_ISR_FORM_Z017'
    IMPORTING
      e_funcname = lv_fm_name.
   EXCEPTION
   CX_FP_API_REPOSITORY = 1
   CX_FP_API_USAGE      = 2
   CX_FP_API_INTERNAL   = 3.
Set form language and country (->form locale)
gs_sfpdocparams-langu = 'E'.
gs_sfpdocparams-country = SY-LANGU.
gs_sfpdocparams-FILLABLE = 'X'.
Now call the generated function module
call function lv_fm_name
    EXPORTING
      /1bcdwb/docparams = gs_sfpdocparams
   IMPORTING
     /1BCDWB/FORMOUTPUT = gs_formoutput
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      others             = 4.
Close spool job
call function 'FP_JOB_CLOSE'
    EXCEPTIONS
      usage_error    = 1
      system_error   = 2
      internal_error = 3
      others         = 4.
But still I'm unable to get form on "Save"..
Please help me.
Regards,
Yogesh

Hi Yogesh,
   Just to test ... can you place your code in a report and call the report with submit ... return in your module pool? For the data tables in the interface, you may export them and import them.. this will ensure that everything is good with your code and the place where you call the code from. I believe the issue is Module Pool rather than anything else. But that's just a doubt and we need to do this to confirm it.
Best Regards,
Abd-Al-Aleem

Error while creating a query for my custom infotype

Hi,
I have created a custom infotype with fields currency amount and currency field .
While I am creating a query for it its giving an error
Message no. AQ_AD_HOC221 Error when generating the report(see long text )
I tried to execute the standard program RPUMS40CCI but still I am facing same error .
I have also maintained table T777i for my infotype but still problem exists.
Please help.
P

Hi
Check in PM01

Error while editing an automaticlly populated record of a custom infotype

hi,
a query in HR ABAP.
i have created a custom Infotype to store the CTC details of an employee. this custom IT needs to get the records auto populated, when they are created in Infotype 0008.
i have used the exit. EXIT_SAPFP50M_002 inside which an include program is written :ZXPADU02
using this, the records made to get create automatically in the custom IT.
but when we try to modify or delete those records thru the tcode PA30,
it does not allow to do so and throws a standard error message. as below.
Specified subtype is invalid
Message no. PG088
please help me out to fix this issue.

the exact point of the std error is,
i do the folowing steps.
1)_ for auto creating a record in custom IT Pa**** , i goto transaction, PA30, create record in IT 0008 with a basic Pay., click on save.
on saving , the EXIT_SAPFP50M_002 is called where i ve written a Z inlcude Program, which inserts the record in custom IT PA****. this is successful.
2) when i try to change or delete the same record which i ve created as above, through the Tcode PA30 for custom IT, PA
****, i get the error.
hope the problem is clearly mentioned

SAP Business One 8.8 - Customer Receivables Ageing Report

Hi All,
We have one client on ramp up for SAP Business One 8.8. They love the new version and the feedback has been exceptional. I have one issue with the customer receivables ageing report. Once the results are displayed we are applying a filter on the report which does not seem to meet our expectations (Possible Bug?) We are trying to filter a particular ageing column only to display values if they are greater than 0 for that column. The filter partailly works since it displays the values greater than 0 but it also displays values where the column value = "Blank" thus not achieving the desired result! Does anybody know how to do this and if not should I log this on the SAP Messages Dashboard?
I have also tried to use a condition where the column is not equal to blank but then again it displays customers who have a negative balance in that column! Once again not the desired result.
Any help / feedback will be much appreciated!
Thanks
Andre Pienaar

Hi,
Please check by selecting any amount appearing in the list in the column you are filtering in the "Greater than". After selcting the value update the same to be zero and then filter the results.
Check if it bring the desired results.
Also, if not, please update us with the patch you are checking in order to test.
Kind Regards,
Jitin
SAP Business One Forum Team

Custom infotype pqah report issue...

Similar Messages

Maybe you are looking for