Custom infotype text in various languages

Hi All,
How can we maintain the Custom Infotype text in different language in table T582S.
When I tried using view V_T582S, by default it is giving entries in only logon language.
Is there any other way to convert the text of custom infotypes to some other languages.
Thanks in advance.
Regards,
Atish

hi
check the table T582T.
regards
Manish
reward points if helpful

Similar Messages

  • Custom Infotype text in V_T582S or T582S

    Hi All,
    How can we maintain the Custom Infotype text in different language in table T582S.
    When I tried using view V_T582S, by default it is giving entries in only logon language.
    Is there any other way to convert the text of custom infotypes to some other languages.
    Thanks in advance.
    Regards,
    Atish

    Hi sanjay,
    I went through SPRO but couldn't find the same where we can maintain the translation.
    Sesh, I checked in SE11 also, there the translation is enabled but I can't change from lets say EN to FR.
    Is there any other way?
    Regards,
    Atish

  • Custom Infotype to support Multiple language

    Hi Experts,
    i need help in creating a custome infotype which should able to support multiple language.
    kindly help how to do that.
    points will be rewarded for helpful answers.
    Best Regards,
    Rahul
    Message was edited by:
            Rahul Kumar Gupta

    Hello rahul,
                   I dont think it need any special settings.You can have a look at
    infotype 0182 as reference.Normally this infotype supports multiple language.
    Reward points if useful.
    Regards,
    Manoj.

  • Creating text in various languages

    I have a project where I have to sub-title a film in 7 different languages, including chinese and korean. Will I be able to use Livetype to construct the sub-titles in all the languages- in other words, will I or a suitably qualified person be able too type in the necessary characters by using just Livetype?

    LiveType would be a complete disaster for subtitling. Use an appropriate application. Better, hire a qualified subtitling service to place the subs on your tape in a post operation. Give them the script and the tapes and be happy to write them a check.
    solid advice: Do not get involved in the subtitling side of this production unless you are totally into it. You cannot believe how difficult it is going to be unless you really know what you're doing. You cannot possibly bill your client for the time you will waste trying to do this yourself but you can bill them for a subcontractor.
    bogiesan

  • Custom infotype in various languages

    Hi All,
    I have created a custom infotype in language 'EN'.
    But when i log on using a different language ,the screen of the custom infotype which i created is totally deformed.
    Please let me know what needs to be done
    Thanks,
    nsp.

    hi
    check the table T582T.
    regards
    Manish
    reward points if helpful

  • Text fields are not displayed for custom infotypes in Adhoc query

    We have developed a custom infotype , which we had incldued in the adhoc query.  when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
    please let me know , how to add text in the out filed filed
    thanks
    rajaram B bhat

    HI
    But in the out put filed , when  i click on the output filed , i am get three drop downs , only text , only value and valu & text.
    Only value is enabled and other two ate disabled.
    How to enable the othet two , i.e text only and value & text
    thanks & regards
    Rajaram B Bhat

  • Adding a text field in a custom infotype

    Hi,
    I have a custom infotype which deals with sickness data of the employee
    My requirement is that the user will enter an explaianation for his sickness...etc. Thus I need to incorporate a text field in my infotype.
    What I am planning is to give a button on the screen of infotype, so when user clicks it a text editor will open and and he can insert or update his sickness text data.
    Please tell me how do i do that and also if there is any alternate better approach.
    Regards,
    Neha

    you need to make a custom container on which you have to put editor
    use class cl_gui_custom_container, cl_gui_text_editor, first define instances in top include then create objects. if you want this to be done when you click on any button then put this coding in the function code of that button.
    aditya

  • Deleting Texts from a Custom Infotype

    I have created a custom infotype. On the infotype screen, there is a button that allows the user to enter some custom text. The screen works well in create, change and display mode; however, when I delete the infotype, the data in the PA9XXX is deleted correctly, but the text data is not.
    The text data is created, changed and displayed using FMs READ_TEXT, EDIT_TEXT, SAVE_TEXT, COMMIT_TEXT, CREATE_TEXT, etc.
    Deletion of data is handled differently in HR. When the u2018deleteu2019 button is pressed, PA30 handles the delete without going through my program, so I am unable to intercept the OK code and do the additional deletes myself. Currently I handle the deletes in a separate program, but this is not a particularly good solution.
    So I want to be able to use FM DELETE_TEXT in my custom infotype.
    Has anyone else tried to do this? If necessary, I will change the SAP code.
    Rob

    >
    Rob Burbank wrote:
    > The text data is created, changed and displayed using FMs READ_TEXT, EDIT_TEXT, SAVE_TEXT, COMMIT_TEXT, CREATE_TEXT, etc.
    Not sure if you are aware of this, if you are, kindly ignore this post.
    The infotype framework has an in-built feature to maintain text for each and every infotype record, while in the [single screen|http://help.sap.com/saphelp_47x200/helpdata/en/4f/d525d4575e11d189270000e8322f96/frameset.htm](2000)
    of an infotype follow the menu path Edit->Maintain text.
    -Rajesh.

  • Custom Infotype with multiple long text fields

    Hi,
    We have a need to create a custom Infotype (in PA or PD) that will contain more than one long-text area.
    I've searched this forum and found that there are generally two approaches :
    1. use the HR clusters for long-text and setting the ITXEX field in PA
    2. using SAP standard text area (SO10) and functions such as READ_TEXT, SAVE_TEXT, etc.
    The problem with (1) is that it can only store one long-text.  We need to have many.  Please correct me if we can hold more than one long text in the cluster...?
    With regard to (2), I'm just not sure that this is the correct place to store the long text...?
    If I was to adopt option (2), could I just use the key of PA9nnn (ie: PAKEY) as the key/TDNAME for STXH?
    Are there any other methods to store long text?
    As well, is it possible to create a custom Infotype in PD?  Can we use PM01 to create PD infotypes?
    Thanks,
    Raj

    Raj
    Sorry I'm not much help on the two questions you have raised...you have probably already got answers by now anyway..however FYI check out link below for enhancing PD infotypes (use transaction PPCI).
    enhance infotypes

  • HRABAP Field text in Custom Infotype

    Hi all,
    I hv created a custom infotype in which I hv a field called "Entry into the Unit as" which is Employee subgroup field. Now when I give a value say "07" and press enter the text of the field "Assistant Manager" is not being displayed as it displays in 0001 infotype.
    Can anyone help me on this regard...
    Thanks & Regards
    Mamtha

    Hi Saquib,
    Thanks for ur help...but I had already seen that...
    Problem solved...
    Thanks & Regards
    Mamtha

  • Adding description text to the screen for a custom infotype.

    I have created a custom infotype through PM01 with 3 components.  The component types have domains with lists of values (value range).  How do I display the short description from the value range on the screen in PA20 or PA30?
    For example I want to display Continuous Self:
    Text                            Value     Description
    FML Absence Code     FMCS    Continuous Self
    I tried adding an I/O field to the screen referencing DD07V-DDTEXT (where the domain values are stored) but the description will not display in PA20 or PA30.  All three fields would have this same reference and that is not allowed either.
    Can anyone tell me how to do this? 
    Thank you.

    In PM01 for the custom infotype select Screen..Edit..Flow Logic.  Three input/Output fields were added to the screen layout.  Since all three fields were in the same table with the same field name, they all have to have unique names in the layout.
    Module 9009 was modified to add code to retrieve the text.
      SELECT SINGLE * FROM dd07v
                      WHERE domname = 'ZZHR_FML_ABSENCE_CODE'
                     AND ddlanguage = 'EN'
                     AND domvalue_l = p9009-zzfmlabccd.
    select single ddtext into w_fmlstatus from DD07V
                                where DOMNAME = 'ZZHR_FML_STATUS_CODE' AND
                                      DDLANGUAGE = 'E' AND
                                      DOMVALUE_L = p9009-zzfmlstatus.
    select single ddtext into w_fmlaleave from DD07V
                                where DOMNAME = 'ZZHR_LEAVE_TYPE' AND
                                      DDLANGUAGE = 'E' AND
                                      DOMVALUE_L = p9009-zzfml_leave_type.
    I hope this helps.

  • Creating custom infotype

    Hi,
    I want to create a custom infotype with the following fields.
    Molga (country grouping)
    Personnel Number
    Subtype
    Language Key
    Comment Line 1
    Comment Line 2
    Comment Line 3
    in this first 4 fields are keys. The user should be able to edit only the rest of the fields.
    Subtypes similar to the infotypes values 0168,0169,0014,0015,0009,0006,0002 should be created.
    While updating and saving the infotypes 0168,0169,0014,0015,0009,0006,0002 the system should prompt this infotype through dynamic action to enable the user to enter comments.
    can anyone give me a step by step approach for creating this infotype?
    Thanks in advance...
    Vijay

    Hi
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Regards
    Anji

  • Error while creating a query for my custom infotype

    Hi,
    I have created a custom infotype with fields currency amount and currency field .
    While I am creating a query for it its giving an error
    Message no. AQ_AD_HOC221 Error when generating the report(see long text )
    I tried to execute the standard program RPUMS40CCI but still I am facing same error .
    I have also maintained table T777i for my infotype but still problem exists.
    Please help.
    P

    Hi
    Check in PM01

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • How to add fields in custom infotype and update its screens

    Hi Experts
        I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release.   is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

    Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the u2018Employee Infotypeu2019 radio button.
    4) Select the u2018PS Structure Infotypeu2019.
    5) Click on Createu2026 A separate table maintenance window appearsu2026
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on u2018Allu2019 push button. It takes a few moments.
    10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
    11) Click on u2018Changeu2019(pencil) button
    12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
    13) Give u2018T591Au2019 as subtype table
    14) Give u2018T591Su2019 as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
    18) Click on u2018Changeu2019 (pencil) button
    19) Click on u2018New Entriesu2019
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirementu2026
    25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
    27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Donu2019t forget to u2018Activate at every level
    i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

Maybe you are looking for

  • I need to set up a new iTunes account. How can I get all my music from the old account on to the new one??? Thanks../

    I have just bought an ipad 2 and wish to set up a new account as now I won't have to share with my sister. I want to get all the music off my current iTunes account & put it on to the ipad/new iTunes account. I'm not too sure how to do this though...

  • Playstation 2 to Widescreen LCD Monitor-- Help

    I recently purchased a 23" Acer widescreen 1080P monitor at a Black Friday sale, and I love this new monitor. It's twice as big as my old one and it is really nice. Anyway, I've heard stories of people hooking up video game systems (in my case a Play

  • How can I know the funcnality of standard pricing formula?

    Dear Expert, There are hundreds of standard formula in CRM system. But how i can know the detail func. of every formula? 1. Is there anyway i can see the code of these formula? 2. Is there any doc. explain the usage of each formula? Thanks very much!

  • 2 Users, separate files

    Have 2 users, each with librairies. Now If we want to download from itunes, do we make a shared file that both can pull from or do both get put in a shared location? Trying not to complicate this too much. Thanks in advance,

  • HELP!! Export Problems

    Ok, new to fireworks need some help big time. I have a finished prototype that I'm trying to export into a working website. I get that Fireworks isn't the best exporter as far as more complicated designs, but I'm kind of at a loss on what to do. I've