Custom JMX MBeans not showing JRMC under Weblogic 10.3.1

Hi,
I have created some custom JMX MBeans and registered them with the Runtime MBean Server as described in the documentation in a ApplicationLifecycleListener. Even though the ObjectInstances I get back from the MBeanServer indicate that the MBean is registered, when I connect to the server using JRockit Mission Control I only see the standard Weblogic MBeans and my custom MBeans do not show.
Side note, when I deploy my application in Weblogic 9.2.3 my custom MBeans do show in JRMC? Weird!!!! Both servers are in development mode and both are using JRockit as the JVM.
Regards,
Mark P Ashworth

You should be able define a remote connection to the WLS MBean server in the JRMC Console in the same fashion as in JConsole. You will however loose a lot of functionality, since (I assume) the JVM MBeans in the platform MBean server will not be avilable from the WLS specific MBean server. Pretty much the only remaining tabs of interest will be MBean browser and the trigger tabs. I guess you could also redefine the other tabs to show WLS specific attributes of interest.
If you wish to monitor the JVM MBeans in the platform MBean server together with the WLS MBeans, then you need to make WLS use the platform MBean server instead of its own, just like the previous entry suggested.

Similar Messages

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications

I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
exist on the consumer farm, but not the new custom properties I recently added.
1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
2. The User Profile Service proxy (connected to the publishing farm UPS application) is associated with all the web applications on the consumer farm.
3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
However, I cannot find any other related information on the web, nor from the ULS logs.

Hi,
As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
In the IIS, it is the topology, check if it starts.
2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
1. Go to Central Administration and going to “Manage Service Applications”.
2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
Your farm GUID should be listed with full permissions.
The article is about Shared Service Architecture in a multi farm environment
http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
Best regards
Sara Fan
TechNet Community Support

I am trying to download previously purchased music from iTunes, it show "purchased" in iTunes Store but does not show up under previous purchase tab

There are several albums that I've previously purchased that somehow were deleted from my computer & iPad. When I go to download available purchases on PC it say that all available punches have been downloaded. When I check iTunes Store it show as "purchased". When I try to check & download from iCloud via either iPad or PC these items do not show up under items purchased.
I can't even re-purchase the item, which I've tried since it shows as purchased in iTunes Store. This is very troublesome because there is no way for me to access these previous purchases. I have been using iTunes & various Apple products with the iTunes Store for several years & there is a lot of money invested in these previous purchases, that there is no way for me to access. As mentioned, I'd even be willing to re-purchase some of these items (though this should be unnecessary). But, the iTunes Store won't let me, because the items show up as purchased in store, but not on any of my devices!!!
Help!

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

HT1657 Where do I go if I rented a movie, thought it finished downloading, was charged for the rental but it's not showing up under videos?

I rented a movie, was charged but it's not showing up under videos. How can I resolve this problem?

Hi Garywilliamsnc!
Try looking for this purchase and re-downloading it from your past purchases, found here:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I just rented a video on my iPad, but it's not showing up under rented videos. Where do I go?

I just rented a video on my iPad and it's not showing up under rented videos. I have rented videos before. But don't know what to do. Help.

It should be in the Videos app
If not, are your age restrictions set up in the Settings >> General >> .......?
If your restrictions are turned on and you rented a PG18 rated movie or something, it won't show by design.

Network devices not showing up under "shared" in finder bar

Ok so i have a network that consists of a maxtor nas device, 2 win xp pc's, 1 win7 pc, d-link 524 router, and my macbook pro. I would like to be able to transfer files between my mac and the devices and use the printer attached to my maxtor. My issue is that none of the computers show up under the "shared" section of finder or under network. I use to have this issue with leopard but it resolved itself. Now under snow leopard for a couple months and i have yet to get it work. I can access my mac and other pcs from a pc. Anyone know how to get my network to show up on my mac?

Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/

Iphone4 not showing up under "My Computer"

I want to take my photos off my iphone onto my computer
It's not showing up under My Computer
I have uninstalled the drivers etc..unplugged, TRUST THIS COMPUTER?!?! about 500 times, reinstalled the drivers, trust this computer, still it's not showing up. Been looking on the internet for answers for the past 3 hours and theyre all the same answerrs but they don't work for me
Can anyone fix this or recommend me a program to get my photos to my computer?
I'm using windows 8

Any success when trying to use Windows Live Photo Gallery or Adobe Photoshop Elements 3.0 or later?

Windows media player files will not play. I downloaded the plug in but does not show up under plugins. Why won't it load?

Whenever I try to play a wmv file through firefox it will not load. It was not a problem a few weeks ago. Under plugins it is saying I do not have windows media player. So I tried downloading it using the troubleshooting directions from firefox. But it still will not show up under plugins. Any help would be much appreciated.

'''np-mswmp''' in your Installed Plugins listing ''(in '''More system details''' to the right of your posting)'' is the Windows Media Player plugin for Firefox.

ATV not showing up under devices in iTunes

I have synced this ATV with this Macbook in the past.
I am able to play music from my Macbook thru my ATV by selecting the ATV speakers instead of the Macbook's speakers.
I can play movie trailers on the ATV.
In iTunes>Preferences>ATV my ATV shows up and says it is syncing
I have updated my ATV and iTunes software.
However, it does not show as syncing on the home screen of iTunes and does not show up under devices on the left side. Any ideas?

porch wrote:
I have synced this ATV with this Macbook in the past.
I am able to play music from my Macbook thru my ATV by selecting the ATV speakers instead of the Macbook's speakers.
I can play movie trailers on the ATV.
In iTunes>Preferences>ATV my ATV shows up and says it is syncing
I have updated my ATV and iTunes software.
However, it does not show as syncing on the home screen of iTunes and does not show up under devices on the left side. Any ideas?
click here and try the suggested steps.
any joy ?

Songs not showing up under artists on my ipod.

Trying to update my ipod but the new artists are not showing up under "artists". They only appear under "Albums". What can I do to fix this??

Welcome to Apple Discussions!
See this...
http://docs.info.apple.com/article.html?artnum=302773
btabz

Print management not showing up under administrative tools

hello!
for some reason even though i have all the proper roles etc installed print management is not showing up under admin tools. i have manually added the snap in to mmc console and saved that to a location for easy access, but the members on my team would like
to have it available to them under admin tools, does anyone know a) why it does not show up or b) how to add my saved mmc snap in so it shows up under admin tools?
thanks in advance.
-chaz

Very strange. I just added it to a Windows Server 2012 R2 server and it shows up in Tools.
Microsoft tools, into the Tools menu on Server Manager, you just need to put an entry in the C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools directory. You can even rearrange things, create sub-directories with different sets
of tools, ACL the entries, etc.
.:|:.:|:. tim

Updated iTunes and iPod software iPod not showing up under devices in iTunes

Updated software since computer said there were updates. Now I'm having trouble with iPod not showing up under devices. Have gone through all the steps under troubleshooting. Nothing helped. Had this same problem periodically in the past, as well. Itunes also says I have an app I reinstalled today due to it not working properly, and it won't synch with iPod. (earlier today, iPod was showing up and synching properly, but this app wasn't getting downloaded to the iPod. Just shows up in iTunes. HAve tried restarting computer, iTunes and iPod, but no luck.

Thank you but I have tried this and it still does not show up. I even tried to delete itunes and reload it but the computer says that it is not able to delete itunes.

3rd generation nano iPod not showing up under devices in iTunes anymore??

When I plug in my 3rd generation iPod nano to my mac OS x 10.7.3 and open iTunes it does not show up under devices anymore. Why and how can I fix this so I can start transferring my songs again?
Thank you!!!!!!!
I have tried every USB port.
I am also running an iPad 1 off of this computer.

Thank you but I have tried this and it still does not show up. I even tried to delete itunes and reload it but the computer says that it is not able to delete itunes.

Custom JMX MBeans not showing JRMC under Weblogic 10.3.1

Similar Messages

Maybe you are looking for