Custom kernel config and fsck error
Why does arch kernel config pass while custom kernel config fail the fsck during boot? Udev obviously populates /dev/sda* with the archlinux kernel config while the custom kernel config populates /dev/hda*. Is there a reason for this behavior related to the config file or is it a initscript based on /etc/fstab related issue? I have the two different kernel configuration files for the i686 machines, just in case someone can figure this out.
http://aur.archlinux.org/packages/longe … ig-longene
http://aur.archlinux.org/packages/longe … -archlinux
Check to make sure that it is not because of the system time being changed. It will complain about this if it has changed and fail the first filesystem check.
Last edited by Wintervenom (2009-09-08 15:56:26)
Similar Messages
-
Hi there,
I have a problem with my MacBook which I bought in April 2007. I upgraded my memory and now have 3GB, the maximum capacity my MacBook 2,1 can deal with. In last week, my computer froze entirely...but the mouse pointer was still moveable what struck me a little. Now, this morning, I had a kernel panic. I'll post the log at the end of this message. I tested my memory because of that with a linux dvd: memtest86. I have up to now 510 errors. I've already changed the memory modules and tested them separately - always errors. Now I wonder if both modules are defective or perhaps something else like perhaps the logic board or the memory controller. The really strange thing is that if I test the memory within OSX, there are no errors found.
Panic log:
panic(cpu 0 caller 0x00241FFA): "ip_output: mix of packet in packetlist is wrong=0x4396a900"@/SourceCache/xnu/xnu-1228.9.59/bsd/netinet/ip_output.c:1494
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x415c3778 : 0x12b4f3 (0x45b13c 0x415c37ac 0x1335e4 0x0)
0x415c37c8 : 0x241ffa (0x4771b8 0x4396a900 0x0 0x0)
0x415c3918 : 0x248771 (0x4396a900 0x3 0x0 0x506b6b0)
0x415c3968 : 0x249f60 (0x3 0x0 0x0 0x1)
0x415c3a98 : 0x24724b (0x506b720 0x415c3c38 0x187c4a61 0x6401a8c0)
0x415c3c78 : 0x23bdc5 (0x438fa800 0x14 0x19cb07 0x0)
0x415c3cb8 : 0x23db47 (0x438fa800 0x14 0x6 0x0)
0x415c3dd8 : 0x23db83 (0x438fa800 0x0 0x6 0xb994)
0x415c3df8 : 0x229b3e (0x2 0x438fa800 0x415c3e48 0x14219
0x415c3e38 : 0x218b47 (0x2 0x438fa800 0x415c3e68 0x5935cb5
0x415c3ec8 : 0x215202 (0x5ae1e04 0x2 0x438fa800 0x3eabf2)
0x415c3ef8 : 0x21595b (0x52ad64 0x546fe88 0x2 0x415c3f74)
0x415c3f68 : 0x215bb9 (0x0 0x438fa800 0x0 0x58f3f2c)
0x415c3fc8 : 0x1a017c (0x58f3f04 0x0 0x1a30b5 0x588604
Backtrace terminated-invalid frame pointer 0
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; rootnu-1228.9.59~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
Can anybody help me?
Thanks already...Henning
EDIT: I tested the memory in OSX with rember and the TechTool Deluxe.
Message was edited by: commanderchenI might have found a solution: memtest86 found on linux dvds/cds doesn't seem to be suitable for Intel Macs. There is a port for Intel Macs: http://matt.ucc.asn.au/memtest/
This program blocks the first 1.2MB, where information concerning Boot Camp are located, which cause errors in the normal memtest86. More information in the link given above.
That's why I received those much error messages. That's also why a memory test within OSX didn't show errors. The test is now running for 14mins and no error has occurred yet.
But can anyone read any information from the panic log? -
Getting and fsck error on startup about /bin/plymouth
Hello,
Yesterday I was rebooting my laptop when this happened, during the booting up there was an usual filesystem check and the it gave me an error and asked me to enter my root password for maintenance or press ctrl+D to continue I just continued to the DM and did run
journalctl -xb
I run openbox with compton and conky and basic apps I do not have KDE installed although I did try installing kde5 but was unable to install completely due to some depenecides not installing.
this is the output:
-- Logs begin at Mon 2014-06-30 10:27:20 IST, end at Mon 2014-07-28 07:02:38 IST. --
Jul 28 06:47:43 sentinel systemd-journal[118]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.7M free of 491.9M available → current limit 49.8M).
Jul 28 06:47:43 sentinel systemd-journal[118]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.7M free of 491.9M available → current limit 49.8M).
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpuset
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpu
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpuacct
Jul 28 06:47:43 sentinel kernel: Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:44:54 CEST 2014
Jul 28 06:47:43 sentinel kernel: e820: BIOS-provided physical RAM map:
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e2fff] ACPI NVS
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Jul 28 06:47:43 sentinel kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
Jul 28 06:47:43 sentinel kernel: SMBIOS 2.4 present.
Jul 28 06:47:43 sentinel kernel: DMI: LENOVO LENOVO3000 Y410 /IGT30, BIOS 05CN39WW(V1.10) 08/29/2007
Jul 28 06:47:43 sentinel kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jul 28 06:47:43 sentinel kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jul 28 06:47:43 sentinel kernel: e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
Jul 28 06:47:43 sentinel kernel: MTRR default type: uncachable
Jul 28 06:47:43 sentinel kernel: MTRR fixed ranges enabled:
Jul 28 06:47:43 sentinel kernel: 00000-9FFFF write-back
Jul 28 06:47:43 sentinel kernel: A0000-BFFFF uncachable
Jul 28 06:47:43 sentinel kernel: C0000-FFFFF write-protect
Jul 28 06:47:43 sentinel kernel: MTRR variable ranges enabled:
Jul 28 06:47:43 sentinel kernel: 0 base 000000000 mask FC0000000 write-back
Jul 28 06:47:43 sentinel kernel: 1 base 03F700000 mask FFFF00000 uncachable
Jul 28 06:47:43 sentinel kernel: 2 base 03F800000 mask FFF800000 uncachable
Jul 28 06:47:43 sentinel kernel: 3 disabled
Jul 28 06:47:43 sentinel kernel: 4 disabled
Jul 28 06:47:43 sentinel kernel: 5 disabled
Jul 28 06:47:43 sentinel kernel: 6 disabled
Jul 28 06:47:43 sentinel kernel: 7 disabled
Jul 28 06:47:43 sentinel kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jul 28 06:47:43 sentinel kernel: found SMP MP-table at [mem 0x000f70d0-0x000f70df] mapped at [c00f70d0]
Jul 28 06:47:43 sentinel kernel: Scanning 1 areas for low memory corruption
Jul 28 06:47:43 sentinel kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
Jul 28 06:47:43 sentinel kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jul 28 06:47:43 sentinel kernel: [mem 0x00000000-0x000fffff] page 4k
Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x37000000-0x373fffff]
Jul 28 06:47:43 sentinel kernel: [mem 0x37000000-0x373fffff] page 2M
Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x30000000-0x36ffffff]
Jul 28 06:47:43 sentinel kernel: [mem 0x30000000-0x36ffffff] page 2M
Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x00100000-0x2fffffff]
Jul 28 06:47:43 sentinel kernel: [mem 0x00100000-0x003fffff] page 4k
Jul 28 06:47:43 sentinel kernel: [mem 0x00400000-0x2fffffff] page 2M
Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x37400000-0x377fdfff]
Jul 28 06:47:43 sentinel kernel: [mem 0x37400000-0x377fdfff] page 4k
Jul 28 06:47:43 sentinel kernel: BRK [0x01798000, 0x01798fff] PGTABLE
Jul 28 06:47:43 sentinel kernel: RAMDISK: [mem 0x37958000-0x37ca3fff]
Jul 28 06:47:43 sentinel kernel: Allocated new RAMDISK: [mem 0x374b2000-0x377fda97]
Jul 28 06:47:43 sentinel kernel: Move RAMDISK from [mem 0x37958000-0x37ca3a97] to [mem 0x374b2000-0x377fda97]
Jul 28 06:47:43 sentinel kernel: ACPI: RSDP 000f7050 000024 (v02 LENOVO)
Jul 28 06:47:43 sentinel kernel: ACPI: XSDT 3f6d7561 00008C (v01 LENOVO CB-01 06040000 LTP 00000000)
Jul 28 06:47:43 sentinel kernel: ACPI: FACP 3f6dfc3a 0000F4 (v03 LENOVO CB-01 06040000 ALAN 00000001)
Jul 28 06:47:43 sentinel kernel: ACPI: DSDT 3f6d92a6 006920 (v02 LENOVO CB-01 06040000 INTL 20060608)
Jul 28 06:47:43 sentinel kernel: ACPI: FACS 3f6e2fc0 000040
Jul 28 06:47:43 sentinel kernel: ACPI: HPET 3f6dfd2e 000038 (v01 LENOVO CB-01 06040000 LOHR 0000005A)
Jul 28 06:47:43 sentinel kernel: ACPI: MCFG 3f6dfd66 00003C (v01 LENOVO CB-01 06040000 LOHR 0000005A)
Jul 28 06:47:43 sentinel kernel: ACPI: TCPA 3f6dfda2 000032 (v01 LENOVO CB-01 06040000 LOHR 0000005A)
Jul 28 06:47:43 sentinel kernel: ACPI: TMOR 3f6dfdd4 000026 (v01 LENOVO CB-01 06040000 PTL 00000003)
Jul 28 06:47:43 sentinel kernel: ACPI: SLIC 3f6dfdfa 000176 (v01 LENOVO CB-01 06040000 TBD 00000001)
Jul 28 06:47:43 sentinel kernel: ACPI: APIC 3f6dff70 000068 (v01 LENOVO CB-01 06040000 LTP 00000000)
Jul 28 06:47:43 sentinel kernel: ACPI: BOOT 3f6dffd8 000028 (v01 LENOVO CB-01 06040000 LTP 00000001)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8c57 00064F (v01 SataRe SataPri 00001000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d85c5 000692 (v01 SataRe SataSec 00001000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7b79 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7ad3 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d75ed 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: Local APIC address 0xfee00000
Jul 28 06:47:43 sentinel kernel: 126MB HIGHMEM available.
Jul 28 06:47:43 sentinel kernel: 887MB LOWMEM available.
Jul 28 06:47:43 sentinel kernel: mapped low ram: 0 - 377fe000
Jul 28 06:47:43 sentinel kernel: low ram: 0 - 377fe000
Jul 28 06:47:43 sentinel kernel: BRK [0x01799000, 0x01799fff] PGTABLE
Jul 28 06:47:43 sentinel kernel: Zone ranges:
Jul 28 06:47:43 sentinel kernel: DMA [mem 0x00001000-0x00ffffff]
Jul 28 06:47:43 sentinel kernel: Normal [mem 0x01000000-0x377fdfff]
Jul 28 06:47:43 sentinel kernel: HighMem [mem 0x377fe000-0x3f6cffff]
Jul 28 06:47:43 sentinel kernel: Movable zone start for each node
Jul 28 06:47:43 sentinel kernel: Early memory node ranges
Jul 28 06:47:43 sentinel kernel: node 0: [mem 0x00001000-0x0009efff]
Jul 28 06:47:43 sentinel kernel: node 0: [mem 0x00100000-0x3f6cffff]
Jul 28 06:47:43 sentinel kernel: On node 0 totalpages: 259694
Jul 28 06:47:43 sentinel kernel: free_area_init_node: node 0, pgdat c15fc600, node_mem_map f6cc2020
Jul 28 06:47:43 sentinel kernel: DMA zone: 32 pages used for memmap
Jul 28 06:47:43 sentinel kernel: DMA zone: 0 pages reserved
Jul 28 06:47:43 sentinel kernel: DMA zone: 3998 pages, LIFO batch:0
Jul 28 06:47:43 sentinel kernel: Normal zone: 1744 pages used for memmap
Jul 28 06:47:43 sentinel kernel: Normal zone: 223230 pages, LIFO batch:31
Jul 28 06:47:43 sentinel kernel: HighMem zone: 254 pages used for memmap
Jul 28 06:47:43 sentinel kernel: HighMem zone: 32466 pages, LIFO batch:7
Jul 28 06:47:43 sentinel kernel: Using APIC driver default
Jul 28 06:47:43 sentinel kernel: ACPI: PM-Timer IO Port: 0x1008
Jul 28 06:47:43 sentinel kernel: ACPI: Local APIC address 0xfee00000
Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jul 28 06:47:43 sentinel kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jul 28 06:47:43 sentinel kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Jul 28 06:47:43 sentinel kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Jul 28 06:47:43 sentinel kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 28 06:47:43 sentinel kernel: ACPI: IRQ0 used by override.
Jul 28 06:47:43 sentinel kernel: ACPI: IRQ2 used by override.
Jul 28 06:47:43 sentinel kernel: ACPI: IRQ9 used by override.
Jul 28 06:47:43 sentinel kernel: Using ACPI (MADT) for SMP configuration information
Jul 28 06:47:43 sentinel kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jul 28 06:47:43 sentinel kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Jul 28 06:47:43 sentinel kernel: nr_irqs_gsi: 40
Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
Jul 28 06:47:43 sentinel kernel: e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Jul 28 06:47:43 sentinel kernel: Booting paravirtualized kernel on bare hardware
Jul 28 06:47:43 sentinel kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Jul 28 06:47:43 sentinel kernel: PERCPU: Embedded 14 pages/cpu @f6ca0000 s33792 r0 d23552 u57344
Jul 28 06:47:43 sentinel kernel: pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
Jul 28 06:47:43 sentinel kernel: pcpu-alloc: [0] 0 [0] 1
Jul 28 06:47:43 sentinel kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257918
Jul 28 06:47:43 sentinel kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=45e3c622-e8c8-40b6-be7c-0c847fe91502 rw quiet
Jul 28 06:47:43 sentinel kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Jul 28 06:47:43 sentinel kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 28 06:47:43 sentinel kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 28 06:47:43 sentinel kernel: Initializing CPU#0
Jul 28 06:47:43 sentinel kernel: allocated 2078328 bytes of page_cgroup
Jul 28 06:47:43 sentinel kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jul 28 06:47:43 sentinel kernel: Initializing HighMem for node 0 (000377fe:0003f6d0)
Jul 28 06:47:43 sentinel kernel: Initializing Movable for node 0 (00000000:00000000)
Jul 28 06:47:43 sentinel kernel: Memory: 1016448K/1038776K available (4445K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 22328K reserved, 129864K highmem)
Jul 28 06:47:43 sentinel kernel: virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc160f000 - 0xc169d000 ( 568 kB)
.data : 0xc1457b12 - 0xc160eb40 (1756 kB)
.text : 0xc1000000 - 0xc1457b12 (4446 kB)
Jul 28 06:47:43 sentinel kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 28 06:47:43 sentinel kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jul 28 06:47:43 sentinel kernel: Preemptible hierarchical RCU implementation.
Jul 28 06:47:43 sentinel kernel: RCU dyntick-idle grace-period acceleration is enabled.
Jul 28 06:47:43 sentinel kernel: Dump stacks of tasks blocking RCU-preempt GP.
Jul 28 06:47:43 sentinel kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Jul 28 06:47:43 sentinel kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Jul 28 06:47:43 sentinel kernel: NR_IRQS:2304 nr_irqs:512 16
Jul 28 06:47:43 sentinel kernel: CPU 0 irqstacks, hard=f6408000 soft=f640a000
Jul 28 06:47:43 sentinel kernel: Console: colour dummy device 80x25
Jul 28 06:47:43 sentinel kernel: console [tty0] enabled
Jul 28 06:47:43 sentinel kernel: hpet clockevent registered
Jul 28 06:47:43 sentinel kernel: tsc: Fast TSC calibration using PIT
Jul 28 06:47:43 sentinel kernel: tsc: Detected 1463.025 MHz processor
Jul 28 06:47:43 sentinel kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 2927.96 BogoMIPS (lpj=4876750)
Jul 28 06:47:43 sentinel kernel: pid_max: default: 32768 minimum: 301
Jul 28 06:47:43 sentinel kernel: ACPI: Core revision 20131218
Jul 28 06:47:43 sentinel kernel: ACPI: All ACPI Tables successfully acquired
Jul 28 06:47:43 sentinel kernel: Security Framework initialized
Jul 28 06:47:43 sentinel kernel: Yama: becoming mindful.
Jul 28 06:47:43 sentinel kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 28 06:47:43 sentinel kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys memory
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys devices
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys freezer
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys net_cls
Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys blkio
Jul 28 06:47:43 sentinel kernel: CPU: Physical Processor ID: 0
Jul 28 06:47:43 sentinel kernel: CPU: Processor Core ID: 0
Jul 28 06:47:43 sentinel kernel: mce: CPU supports 6 MCE banks
Jul 28 06:47:43 sentinel kernel: CPU0: Thermal monitoring handled by SMI
Jul 28 06:47:43 sentinel kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Jul 28 06:47:43 sentinel kernel: Freeing SMP alternatives memory: 16K (c169d000 - c16a1000)
Jul 28 06:47:43 sentinel kernel: ftrace: allocating 18913 entries in 37 pages
Jul 28 06:47:43 sentinel kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 28 06:47:43 sentinel kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 28 06:47:43 sentinel kernel: smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz (fam: 06, model: 0f, stepping: 0d)
Jul 28 06:47:43 sentinel kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
Jul 28 06:47:43 sentinel kernel: perf_event_intel: PEBS disabled due to CPU errata
Jul 28 06:47:43 sentinel kernel: ... version: 2
Jul 28 06:47:43 sentinel kernel: ... bit width: 40
Jul 28 06:47:43 sentinel kernel: ... generic registers: 2
Jul 28 06:47:43 sentinel kernel: ... value mask: 000000ffffffffff
Jul 28 06:47:43 sentinel kernel: ... max period: 000000007fffffff
Jul 28 06:47:43 sentinel kernel: ... fixed-purpose events: 3
Jul 28 06:47:43 sentinel kernel: ... event mask: 0000000700000003
Jul 28 06:47:43 sentinel kernel: CPU 1 irqstacks, hard=f64cc000 soft=f64ce000
Jul 28 06:47:43 sentinel kernel: x86: Booting SMP configuration:
Jul 28 06:47:43 sentinel kernel: .... node #0, CPUs: #1
Jul 28 06:47:43 sentinel kernel: Initializing CPU#1
Jul 28 06:47:43 sentinel kernel: CPU1: Thermal monitoring handled by SMI
Jul 28 06:47:43 sentinel kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Jul 28 06:47:43 sentinel kernel: x86: Booted up 1 node, 2 CPUs
Jul 28 06:47:43 sentinel kernel: smpboot: Total of 2 processors activated (5854.93 BogoMIPS)
Jul 28 06:47:43 sentinel kernel: devtmpfs: initialized
Jul 28 06:47:43 sentinel kernel: PM: Registering ACPI NVS region [mem 0x3f6d0000-0x3f6e2fff] (77824 bytes)
Jul 28 06:47:43 sentinel kernel: pinctrl core: initialized pinctrl subsystem
Jul 28 06:47:43 sentinel kernel: RTC time: 1:17:37, date: 07/28/14
Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 16
Jul 28 06:47:43 sentinel kernel: cpuidle: using governor ladder
Jul 28 06:47:43 sentinel kernel: cpuidle: using governor menu
Jul 28 06:47:43 sentinel kernel: ACPI: bus type PCI registered
Jul 28 06:47:43 sentinel kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jul 28 06:47:43 sentinel kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jul 28 06:47:43 sentinel kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Jul 28 06:47:43 sentinel kernel: PCI: Using MMCONFIG for extended config space
Jul 28 06:47:43 sentinel kernel: PCI: Using configuration type 1 for base access
Jul 28 06:47:43 sentinel kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Jul 28 06:47:43 sentinel kernel: mtrr: probably your BIOS does not setup all CPUs.
Jul 28 06:47:43 sentinel kernel: mtrr: corrected configuration.
Jul 28 06:47:43 sentinel kernel: bio: create slab <bio-0> at 0
Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Module Device)
Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Processor Device)
Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jul 28 06:47:43 sentinel kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8307 0001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7dd8 0004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d84fd 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8282 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
Jul 28 06:47:43 sentinel kernel: ACPI: Interpreter enabled
Jul 28 06:47:43 sentinel kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
Jul 28 06:47:43 sentinel kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
Jul 28 06:47:43 sentinel kernel: ACPI: (supports S0 S3 S4 S5)
Jul 28 06:47:43 sentinel kernel: ACPI: Using IOAPIC for interrupt routing
Jul 28 06:47:43 sentinel kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Jul 28 06:47:43 sentinel kernel: ACPI: No dock devices found.
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
Jul 28 06:47:43 sentinel kernel: PCI: root bus 00: using default resources
Jul 28 06:47:43 sentinel kernel: PCI host bridge to bus 0000:00
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf80fffff 64bit]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf8100000-0xf81fffff 64bit]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf8504000-0xf85043ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf8300000-0xf8303fff 64bit]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xf8504400-0xf85047ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: [8086:2828] type 00 class 0x010180
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x24: [io 0x18d0-0x18df]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: PME# supported from D3hot
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: [8086:4222] type 00 class 0x028000
Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: reg 0x10: [mem 0xf0000000-0xf0000fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PCI bridge to [bus 04]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: acpiphp: Slot [1] registered
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PCI bridge to [bus 05]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: [14e4:1713] type 00 class 0x020000
Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: reg 0x10: [mem 0xb8000000-0xb800ffff 64bit]
Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: PME# supported from D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: System wakeup disabled by ACPI
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PCI bridge to [bus 06]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: [1180:0832] type 00 class 0x0c0010
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: MMC cards are now supported by standard SDHCI controller
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: reg 0x10: [mem 0xf8200000-0xf82007ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: supports D1 D2
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: [1180:0822] type 00 class 0x080500
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: reg 0x10: [mem 0xf8200800-0xf82008ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: supports D1 D2
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: [1180:0592] type 00 class 0x088000
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: reg 0x10: [mem 0xf8201000-0xf82010ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: supports D1 D2
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: [1180:0852] type 00 class 0x088000
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: reg 0x10: [mem 0xf8201400-0xf82014ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: supports D1 D2
Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: on NUMA node 0
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Jul 28 06:47:43 sentinel kernel: ACPI: Enabled 4 GPEs in block 00 to 1F
Jul 28 06:47:43 sentinel kernel: ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Jul 28 06:47:43 sentinel kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jul 28 06:47:43 sentinel kernel: vgaarb: loaded
Jul 28 06:47:43 sentinel kernel: vgaarb: bridge control possible 0000:00:02.0
Jul 28 06:47:43 sentinel kernel: PCI: Using ACPI for IRQ routing
Jul 28 06:47:43 sentinel kernel: PCI: pci_cache_line_size set to 64 bytes
Jul 28 06:47:43 sentinel kernel: e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
Jul 28 06:47:43 sentinel kernel: e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
Jul 28 06:47:43 sentinel kernel: NetLabel: Initializing
Jul 28 06:47:43 sentinel kernel: NetLabel: domain hash size = 128
Jul 28 06:47:43 sentinel kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jul 28 06:47:43 sentinel kernel: NetLabel: unlabeled traffic allowed by default
Jul 28 06:47:43 sentinel kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Jul 28 06:47:43 sentinel kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jul 28 06:47:43 sentinel kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Jul 28 06:47:43 sentinel kernel: Switched to clocksource hpet
Jul 28 06:47:43 sentinel kernel: pnp: PnP ACPI init
Jul 28 06:47:43 sentinel kernel: ACPI: bus type PNP registered
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 28 06:47:43 sentinel kernel: pnp 00:01: [dma 4]
Jul 28 06:47:43 sentinel kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Jul 28 06:47:43 sentinel kernel: pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
Jul 28 06:47:43 sentinel kernel: system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
Jul 28 06:47:43 sentinel kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x0680-0x069f] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x0800-0x080f] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x1000-0x107f] could not be reserved
Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x1180-0x11bf] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0xfe00] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0xff00-0xff7f] has been reserved
Jul 28 06:47:43 sentinel kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Jul 28 06:47:43 sentinel kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Jul 28 06:47:43 sentinel kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
Jul 28 06:47:43 sentinel kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
Jul 28 06:47:43 sentinel kernel: pnp: PnP ACPI: found 9 devices
Jul 28 06:47:43 sentinel kernel: ACPI: bus type PNP unregistered
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: BAR 0: assigned [mem 0x40000000-0x400000ff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PCI bridge to [bus 04]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PCI bridge to [bus 05]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PCI bridge to [bus 06]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: PCI bridge to [bus 08]
Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 1 [mem 0xb8000000-0xbbffffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffff]
Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 2
Jul 28 06:47:43 sentinel kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jul 28 06:47:43 sentinel kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jul 28 06:47:43 sentinel kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jul 28 06:47:43 sentinel kernel: TCP: reno registered
Jul 28 06:47:43 sentinel kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Jul 28 06:47:43 sentinel kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 1
Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: Boot video device
Jul 28 06:47:43 sentinel kernel: PCI: CLS 64 bytes, default 64
Jul 28 06:47:43 sentinel kernel: Unpacking initramfs...
Jul 28 06:47:43 sentinel kernel: Freeing initrd memory: 3376K (f74b2000 - f77fe000)
Jul 28 06:47:43 sentinel kernel: Simple Boot Flag at 0x37 set to 0x1
Jul 28 06:47:43 sentinel kernel: apm: BIOS not found.
Jul 28 06:47:43 sentinel kernel: Scanning for low memory corruption every 60 seconds
Jul 28 06:47:43 sentinel kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
Jul 28 06:47:43 sentinel kernel: bounce pool size: 64 pages
Jul 28 06:47:43 sentinel kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Jul 28 06:47:43 sentinel kernel: zbud: loaded
Jul 28 06:47:43 sentinel kernel: VFS: Disk quotas dquot_6.5.2
Jul 28 06:47:43 sentinel kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 28 06:47:43 sentinel kernel: msgmni has been set to 1738
Jul 28 06:47:43 sentinel kernel: Key type big_key registered
Jul 28 06:47:43 sentinel kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jul 28 06:47:43 sentinel kernel: io scheduler noop registered
Jul 28 06:47:43 sentinel kernel: io scheduler deadline registered
Jul 28 06:47:43 sentinel kernel: io scheduler cfq registered (default)
Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
Jul 28 06:47:43 sentinel kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 28 06:47:43 sentinel kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jul 28 06:47:43 sentinel kernel: vesafb: mode is 1280x800x32, linelength=5120, pages=0
Jul 28 06:47:43 sentinel kernel: vesafb: scrolling: redraw
Jul 28 06:47:43 sentinel kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jul 28 06:47:43 sentinel kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 4032k, total 4032k
Jul 28 06:47:43 sentinel kernel: Console: switching to colour frame buffer device 160x50
Jul 28 06:47:43 sentinel kernel: fb0: VESA VGA frame buffer device
Jul 28 06:47:43 sentinel kernel: intel_idle: does not run on family 6 model 15
Jul 28 06:47:43 sentinel kernel: GHES: HEST is not enabled!
Jul 28 06:47:43 sentinel kernel: isapnp: Scanning for PnP cards...
Jul 28 06:47:43 sentinel kernel: isapnp: No Plug & Play device found
Jul 28 06:47:43 sentinel kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: RTC can wake from S4
Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Jul 28 06:47:43 sentinel kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jul 28 06:47:43 sentinel kernel: TCP: cubic registered
Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 10
Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 17
Jul 28 06:47:43 sentinel kernel: Using IPI No-Shortcut mode
Jul 28 06:47:43 sentinel kernel: registered taskstats version 1
Jul 28 06:47:43 sentinel kernel: Magic number: 6:931:256
Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: setting system clock to 2014-07-28 01:17:37 UTC (1406510257)
Jul 28 06:47:43 sentinel kernel: PM: Hibernation image not present or could not be loaded.
Jul 28 06:47:43 sentinel kernel: Freeing unused kernel memory: 568K (c160f000 - c169d000)
Jul 28 06:47:43 sentinel kernel: Write protecting the kernel text: 4448k
Jul 28 06:47:43 sentinel kernel: Write protecting the kernel read-only data: 1284k
Jul 28 06:47:43 sentinel kernel: random: systemd-tmpfile urandom read with 0 bits of entropy available
Jul 28 06:47:43 sentinel systemd-udevd[47]: starting version 215
Jul 28 06:47:43 sentinel kernel: ACPI: bus type USB registered
Jul 28 06:47:43 sentinel kernel: usbcore: registered new interface driver usbfs
Jul 28 06:47:43 sentinel kernel: usbcore: registered new interface driver hub
Jul 28 06:47:43 sentinel kernel: usbcore: registered new device driver usb
Jul 28 06:47:43 sentinel kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 28 06:47:43 sentinel kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: detected 2 ports
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jul 28 06:47:43 sentinel kernel: ehci-pci: EHCI PCI platform driver
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: detected 2 ports
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
Jul 28 06:47:43 sentinel kernel: SCSI subsystem initialized
Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: debug port 1
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: irq 18, io mem 0xf8504000
Jul 28 06:47:43 sentinel kernel: sdhci: Secure Digital Host Controller Interface driver
Jul 28 06:47:43 sentinel kernel: sdhci: Copyright(c) Pierre Ossman
Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 22)
Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 28 06:47:43 sentinel kernel: mmc0: SDHCI controller on PCI [0000:08:06.1] using DMA
Jul 28 06:47:43 sentinel kernel: libata version 3.00 loaded.
Jul 28 06:47:43 sentinel kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 28 06:47:43 sentinel kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jul 28 06:47:43 sentinel kernel: hub 3-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 3-0:1.0: 4 ports detected
Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: debug port 1
Jul 28 06:47:43 sentinel kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8504400
Jul 28 06:47:43 sentinel kernel: firewire_ohci 0000:08:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jul 28 06:47:43 sentinel kernel: hub 4-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 4-0:1.0: 6 ports detected
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
Jul 28 06:47:43 sentinel kernel: hub 5-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 5-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
Jul 28 06:47:43 sentinel kernel: hub 6-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 6-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
Jul 28 06:47:43 sentinel kernel: hub 7-0:1.0: USB hub found
Jul 28 06:47:43 sentinel kernel: hub 7-0:1.0: 2 ports detected
Jul 28 06:47:43 sentinel kernel: ata_piix 0000:00:1f.2: version 2.13
Jul 28 06:47:43 sentinel kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Jul 28 06:47:43 sentinel kernel: scsi0 : ata_piix
Jul 28 06:47:43 sentinel kernel: scsi1 : ata_piix
Jul 28 06:47:43 sentinel kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
Jul 28 06:47:43 sentinel kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
Jul 28 06:47:43 sentinel kernel: usb 4-4: new high-speed USB device number 2 using ehci-pci
Jul 28 06:47:43 sentinel kernel: ata2.00: ATAPI: MATSHITADVD-RAM UJ-85JS, FYX4, max UDMA/66
Jul 28 06:47:43 sentinel kernel: ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
Jul 28 06:47:43 sentinel kernel: ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jul 28 06:47:43 sentinel kernel: ata2.00: configured for UDMA/66
Jul 28 06:47:43 sentinel kernel: ata1.00: configured for UDMA/100
Jul 28 06:47:43 sentinel kernel: scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
Jul 28 06:47:43 sentinel kernel: scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS FYX4 PQ: 0 ANSI: 5
Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Write Protect is off
Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 28 06:47:43 sentinel kernel: sda: sda1 sda2 sda3 sda4
Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jul 28 06:47:43 sentinel kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Jul 28 06:47:43 sentinel kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jul 28 06:47:43 sentinel kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jul 28 06:47:43 sentinel kernel: tsc: Refined TSC clocksource calibration: 1462.999 MHz
Jul 28 06:47:43 sentinel kernel: firewire_core 0000:08:06.0: created device fw0: GUID 00023f79af40a4d3, S400
Jul 28 06:47:43 sentinel kernel: Switched to clocksource tsc
Jul 28 06:47:43 sentinel kernel: random: nonblocking pool is initialized
Jul 28 06:47:43 sentinel kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Jul 28 06:47:43 sentinel kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
Jul 28 06:47:43 sentinel systemd-journal[118]: Journal started
-- Subject: The Journal has been started
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- The system journal process has been starting up, opened the journal
-- files for writing and is now ready to process requests.
Jul 28 06:47:43 sentinel systemd-udevd[141]: starting version 215
Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-1 state
Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-2 state
Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-3 state
Jul 28 06:47:44 sentinel kernel: tsc: Marking TSC unstable due to TSC halts in idle
Jul 28 06:47:44 sentinel kernel: ACPI: acpi_idle registered with cpuidle
Jul 28 06:47:44 sentinel kernel: Switched to clocksource hpet
Jul 28 06:47:44 sentinel kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
Jul 28 06:47:44 sentinel kernel: ACPI: Lid Switch [LID0]
Jul 28 06:47:44 sentinel kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Jul 28 06:47:44 sentinel kernel: ACPI: Power Button [PWRB]
Jul 28 06:47:44 sentinel kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
Jul 28 06:47:44 sentinel kernel: ACPI: Sleep Button [SLPB]
Jul 28 06:47:44 sentinel kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Jul 28 06:47:44 sentinel kernel: ACPI: Power Button [PWRF]
Jul 28 06:47:44 sentinel kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 28 06:47:44 sentinel kernel: wmi: Mapper loaded
Jul 28 06:47:44 sentinel kernel: ACPI: Battery Slot [BAT1] (battery present)
Jul 28 06:47:44 sentinel kernel: ACPI: AC Adapter [ACAD] (on-line)
Jul 28 06:47:44 sentinel kernel: Linux agpgart interface v0.103
Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20131218/utaddress-258)
Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jul 28 06:47:44 sentinel kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: Intel 965GM Chipset
Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: detected 8192K stolen memory
Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Jul 28 06:47:45 sentinel kernel: ACPI: Invalid active0 threshold
Jul 28 06:47:45 sentinel kernel: thermal LNXTHERM:00: registered as thermal_zone0
Jul 28 06:47:45 sentinel kernel: ACPI: Thermal Zone [TZ00] (44 C)
Jul 28 06:47:45 sentinel kernel: ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
Jul 28 06:47:45 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jul 28 06:47:45 sentinel kernel: [drm] Initialized drm 1.1.0 20060810
Jul 28 06:47:45 sentinel kernel: ideapad_laptop: timeout in read_ec_cmd
Jul 28 06:47:45 sentinel kernel: input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input6
Jul 28 06:47:45 sentinel kernel: cfg80211: Calling CRDA to update world regulatory domain
Jul 28 06:47:45 sentinel kernel: pps_core: LinuxPPS API ver. 1 registered
Jul 28 06:47:45 sentinel kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
Jul 28 06:47:45 sentinel kernel: r852: driver loaded successfully
Jul 28 06:47:45 sentinel kernel: PTP clock support registered
Jul 28 06:47:45 sentinel kernel: [drm] Memory usable by graphics device = 512M
Jul 28 06:47:45 sentinel kernel: checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
Jul 28 06:47:45 sentinel kernel: fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Jul 28 06:47:45 sentinel kernel: Console: switching to colour dummy device 80x25
Jul 28 06:47:45 sentinel kernel: i915 0000:00:02.0: irq 44 for MSI/MSI-X
Jul 28 06:47:45 sentinel kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Jul 28 06:47:45 sentinel kernel: [drm] Driver supports precise vblank timestamp query.
Jul 28 06:47:45 sentinel kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Jul 28 06:47:45 sentinel kernel: [drm] initialized overlay support
Jul 28 06:47:46 sentinel kernel: tg3.c:v3.136 (Jan 03, 2014)
Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:98:bc:f2
Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Jul 28 06:47:46 sentinel kernel: iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
Jul 28 06:47:46 sentinel kernel: iwl3945: Copyright(c) 2003-2011 Intel Corporation
Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
Jul 28 06:47:46 sentinel kernel: snd_hda_intel: unknown parameter 'vid' ignored
Jul 28 06:47:46 sentinel kernel: snd_hda_intel: unknown parameter 'pid' ignored
Jul 28 06:47:46 sentinel kernel: fbcon: inteldrmfb (fb0) is primary device
Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: irq 45 for MSI/MSI-X
Jul 28 06:47:46 sentinel kernel: r592: driver successfully loaded
Jul 28 06:47:46 sentinel kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
Jul 28 06:47:46 sentinel kernel: media: Linux media interface: v0.10
Jul 28 06:47:46 sentinel kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
Jul 28 06:47:46 sentinel kernel: microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
Jul 28 06:47:46 sentinel kernel: microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
Jul 28 06:47:46 sentinel kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Jul 28 06:47:46 sentinel kernel: Adding 2000088k swap on /dev/sda3. Priority:-1 extents:1 across:2000088k FS
Jul 28 06:47:46 sentinel kernel: iTCO_vendor_support: vendor-support=0
Jul 28 06:47:46 sentinel systemd-udevd[152]: renamed network interface wlan0 to wlp4s0
Jul 28 06:47:46 sentinel kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Jul 28 06:47:46 sentinel kernel: iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
Jul 28 06:47:46 sentinel kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jul 28 06:47:46 sentinel kernel: Console: switching to colour frame buffer device 160x50
Jul 28 06:47:46 sentinel kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Jul 28 06:47:46 sentinel kernel: i915 0000:00:02.0: registered panic notifier
Jul 28 06:47:46 sentinel kernel: Linux video capture interface: v2.00
Jul 28 06:47:46 sentinel systemd-udevd[148]: renamed network interface eth0 to enp6s0
Jul 28 06:47:46 sentinel kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jul 28 06:47:46 sentinel kernel: ideapad_laptop: timeout in write_ec_cmd
Jul 28 06:47:46 sentinel kernel: acpi device:09: registered as cooling_device2
Jul 28 06:47:46 sentinel kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
Jul 28 06:47:46 sentinel kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Jul 28 06:47:46 sentinel kernel: snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Jul 28 06:47:47 sentinel kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
Jul 28 06:47:47 sentinel kernel: uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008)
Jul 28 06:47:47 sentinel kernel: input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input11
Jul 28 06:47:47 sentinel kernel: usbcore: registered new interface driver uvcvideo
Jul 28 06:47:47 sentinel kernel: USB Video Class driver (1.1.1)
Jul 28 06:47:47 sentinel kernel: input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
Jul 28 06:47:47 sentinel kernel: input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Jul 28 06:47:47 sentinel systemd-fsck[178]: /dev/sda4: recovering journal
Jul 28 06:47:47 sentinel kernel: input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input12
Jul 28 06:47:47 sentinel kernel: input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
Jul 28 06:47:47 sentinel kernel: mousedev: PS/2 mouse device common for all mice
Jul 28 06:47:47 sentinel kernel: usb 1-2: new full-speed USB device number 2 using uhci_hcd
Jul 28 06:47:48 sentinel systemd-fsck[178]: /dev/sda4 contains a file system with errors, check forced.
Jul 28 06:47:48 sentinel kernel: Bluetooth: Core ver 2.18
Jul 28 06:47:48 sentinel kernel: NET: Registered protocol family 31
Jul 28 06:47:48 sentinel kernel: Bluetooth: HCI device and connection manager initialized
Jul 28 06:47:48 sentinel kernel: Bluetooth: HCI socket layer initialized
Jul 28 06:47:48 sentinel kernel: Bluetooth: L2CAP socket layer initialized
Jul 28 06:47:48 sentinel kernel: Bluetooth: SCO socket layer initialized
Jul 28 06:47:48 sentinel kernel: usbcore: registered new interface driver btusb
Jul 28 06:47:48 sentinel kernel: hda-codec: out of range cmd 1:a:100:fffffffe
Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: Inode 2753367, i_blocks is 1552, should be 1536. FIXED.
Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: Inodes that were part of a corrupted orphan linked list found.
Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Jul 28 06:47:50 sentinel systemd-fsck[178]: (i.e., without -a or -p options)
Jul 28 06:47:50 sentinel systemd-fsck[178]: fsck failed with error code 4.
Jul 28 06:47:50 sentinel systemd-fsck[178]: Running request emergency.target/start/replace
Jul 28 06:47:50 sentinel kernel: EXT4-fs (sda4): warning: mounting fs with errors, running e2fsck is recommended
Jul 28 06:47:50 sentinel kernel: EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
Jul 28 06:47:51 sentinel systemd-journal[118]: Permanent journal is using 520.1M (max allowed 2.8G, trying to leave 354.1M free of 18.5G available → current limit 2.8G).
Jul 28 06:47:51 sentinel systemd-journal[118]: Time spent on flushing to /var is 509.727ms for 733 entries.
Jul 28 06:47:50 sentinel systemd[203]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
-- Subject: Process /bin/plymouth could not be executed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- The process /bin/plymouth could not be executed and failed.
-- The error number returned while executing this process is 2.
Jul 28 06:48:05 sentinel dbus[241]: [system] Successfully activated service 'org.freedesktop.systemd1'
Jul 28 06:48:05 sentinel systemd-logind[240]: New seat seat0.
-- Subject: A new seat seat0 is now available
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
-- A new seat seat0 has been configured and is now available.
Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event4 (Power Button)
Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event7 (Video Bus)
Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event2 (Power Button)
Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event1 (Lid Switch)
Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /I'm not a hardware person, but I doubt it can be repaired.
You might put it in a USB enclosure and try to access the data from another computer. Some have had luck with this treatment.
-Jerry -
Kernel Panics and other errors
Ok here's the deal. I was having a lot of problems with my MacBook Pro and reinstalling Leopard did nothing to help, so I took it to the Apple store near me and checked it in. A couple of weeks later I got it back with a new logic board, new hard drive, and new hard drive cable. Since then I've been having kernel panics every now and then. The only time it happens regularly is when I try to do a directory repair with DiskWarrior on my external Firewire drive running 10.5.3.
The FW drive's panic log refers to a simple lock deadlock detection caused by com.alsoft.Preview. A Safe Boot fixes the issue, which would point to a conflicting kext or login item or something like that. What I can't figure out is why it worked perfectly before my laptop was repaired, and now consistently causes a kernel panic whenever I run it. Nothing on the external drive has changed since then, so I'd have to assume the hardware change would be the problem. But then why would a Safe Boot solve the problem? Maybe a driver or something that isn't being loaded in Safe Mode but normally is encountering an error due to bad hardware?
I also have two other panic logs from my internal hard drive. The first is a kernel trap, also caused by com.alsoft.Preview. I'm not sure why it was stored on the internal hard drive's Logs folder since I only run DiskWarrior from my FW drive (it's not even installed on the internal drive), but I digress. The other panic was caused by an "IOGMD: not wired for the IODMACommand" error. Apparently the error had to do with a few USB-related drivers and IOKits, namely IOUSBMassStorageClass, AppleUSBEHCI, and IOUSBFamily. I've been having some weird issues with my USB flash drive lately, mostly file transfers going incredibly slow (like 300 KB/sec slow). I haven't been having these issues on any other computer, and I've even verified the flash drive with Disk Utility, so I would have to say the problem is with the Mac and not the drive itself.
Now for the other errors. I've been getting Disk Too Slow errors in GarageBand when recording guitar tracks (which I've never gotten before), and there's a lot of background noise when recording that wasn't there before the repair. Before I could connect the audio output on the amp to the line in on my laptop using a 1/4" to 3.5 mm cable, and everything sounded pretty clean. Now the sound is distorted and there's a lot of static during silence. The only way to get it sound somewhat decent is to play around with the gate and compression settings.
I'm also having occasional issues ejecting drives and virtual drives, Spotlight tries to index drives that are added to the exception list in System Preferences, and weird random errors showing up in Console related to Finder, Dock, certain apps, and fseventd (the fseventd errors are usually about my flash drive). I'm leaning toward a bad logic board, even though that was just replaced. I just did an Erase and Install a few weeks ago so I doubt it's software-related. Plus I've been having issues with it in one form or another since I got it back, which also makes me think it's not the OS.
Anyway, I'm just looking for opinions at this point. I'm going to take it back to the Apple store in a few days because of a small group of dead pixels, so as long as I'm down there I'll ask them. In the meantime, anyone have any thoughts?https://bbs.archlinux.org/viewtopic.php?id=138105
-
Changing a parameter in Kernel Config and applying
Hi,
due to https://bbs.archlinux.org/viewtopic.php?id=168801 issue, I wanted to follow the fix explained here : http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=665493
and actually on Arch Linux :
]# zcat /proc/config.gz | grep CONFIG_HOTPLUG_PCI_ACPI
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
So basically I want to set CONFIG_HOTPLUG_PCI_ACPI to m and apply the configuration.
What's a safe way to do that?
thanks.Thanks Karol ,
while I'm going through the recompilation process , is there any chance to choose the version with ABSROOT in order to skip also the broadcom bug? https://bbs.archlinux.org/viewtopic.php?id=168177
And I was interested if *before* going through the hole thing I can somehow make use of :
ls /usr/src/linux-3.0.93-1-lts/
Documentation Kconfig Makefile Module.symvers arch block crypto drivers fs include init kernel lib mm net samples scripts security sound usr virt
If I can generate the images and choose to boot from either kernel when logging in.
Big Thanks. -
Customized Cache Config and Coherence Override files not Overrided.
Hi,
I am doing an example on coherence and was wondering if anyone can help with a couple of questions.
1. I am trying to override the coherence-cache-config.xml and tangosol-coherence-override.xml with my custom xmls. But when I start cache server from cache-server.cmd executable provided in bin folder of Coherence, it is not able to pick up the overrided files. How can I override both these files.
2. In most of the examples a new executable file is made for cache server start and the custom coherence-cache-config.xml is specified in this. The examples runs perfectly fine but I'm not able to see the same cache elements available when I run cache-server and cache-client present in the bin folder of Coherence. How can I integrate both of them.
3. When we use Coherence as a web service from server, are we suppose to use run cache-server.cmd for starting the cache server or make some custom file executable file made for cache server start.
I know some of the questions may sound silly to you but I'm not still able to figure the answer to these question.
Any help will be appreciated.
Cheers,
VarunHi Varun,
Yes you can use the property -Dtangosol.coherence.cacheconfig =<file_name> for specifying the override file. No creating a jar is not a bottleneck and you can use either jar or system property in Production Environment. It completely depends on how your environment is setup and is for the flexibility pruposes? Use whichever is handy ...
Ideally, you WS application should run in a seperate JVM than your Coherence Nodes. In this scenario, your WS application is set as storage-disabled and your Coherence nodes will be set as storage-enabled and both WS and Coherence Nodes will be part of the Coherence cluster. There will be no syncing between WS application and Coherence Nodes if you are using distributed cache; all the data requests from the WS application will be served by the Coherence Nodes. But, if you are using Near Cache then the data syncing will depend on the invalidation strategy used by you in your cache configuration. Read more about near-cache scheme here: http://wiki.tangosol.com/display/COH35UG/near-scheme.
In WLS 10.3.4, there is a integration of Coherence and you can create Coherence Cluster from the Admin Console and define various Coherence cluster nodes and the documentation is here (http://download.oracle.com/docs/cd/E17904_01/web.1111/e16517/coh_wls.htm). But if you are using any other version of Weblogic or any other container then you cannot start from Weblogic but you need to start them seperately. Also, you need to make sure that the Coherence Nodes with storage-enabled are started before the storage-disabled nodes.
Hope this helps!
Cheers,
NJ -
[solved] Nvidia with custom kernel
Hello,
I just compiled a new custom kernel and the custom kernel headers and then went on to create a custom nvidia kernel module. Somehow that doesn't seem to work. Nvidia is complaining that there is something Xen-ish in my kernel:
Creating directory NVIDIA-Linux-x86_64-260.19.36-no-compat32
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 260.19.36.....................................................................................................................
The kernel you are installing for is a Xen kernel!
The NVIDIA driver does not currently work on Xen kernels. If
you are using a stock distribution kernel, please install
a variant of this kernel without Xen support; if this is a
custom kernel, please install a standard Linux kernel. Then
try installing the NVIDIA kernel module again.
*** Failed Xen sanity check. Bailing out! ***
make[1]: *** [build-sanity-checks] Error 1
make: *** [module] Error 2
Aborting...
As far as I know there is no xen or other vm stuff in the kernel. To verify this I tried to make a new nvidia package for the standard kernel. Again the same error.
Also this makes me wonder how the PKGBUILD works since it the build function just runs:
make SYSSRC=/path/to/current/kernelmodules/build module
and there are no xen sanity checks in that script, that happens in nvidia-installer - which isn't called from the PKGBUILD....
Secondly, when doing a "make module" from the nvidia/kernel dir with the standard kernel there is a difference between the abs package and the extra package. Anyone a clue what is going on in the PKGBUILD and why the difference between the two kernel modules?
Thanks.
Last edited by Ulf (2011-02-04 22:20:51)Ulf wrote:Yeah that seems to work but still wondering why the PKBUILD calls nvidia-installer
To unpack it. From the PKGBUILD:
sh ${_pkg}.run --extract-only
Note the '--extract-only'
Ulf wrote:and why there is a slight difference in size between the extra package and my own module for the same standard arch kernel
Different cflags? Different compiler version?
Ulf wrote:and why nvidia thinks there is a kernel with Xen (it seems that it is some sort of common bug, not specific to arch but nvidia-ish).
Quite likely false detection. The installer sees something activated in the kernel and thinks it's xen related. Or something. -
Kernel Panic -- Graphics chip error! Restarted.
Anyone out there seen ridiculous gfx card/kernel errors with Adobe CS2? My machine runs weird every time that I use Photoshop or Illustrator. Batches don't finish, and I have even been getting kernel panics lately. I would post it to Adobe, but kernel panics and hardware errors fall into Apple's domain. Hardware/Software/OS is fine for all but CS2, including opengl/coreimage/corevideo apps. I have a quad g5 with an nvidia 6800 GT gfx card with dual cinema displays and a wacom tablet. OSX is up-to-date, as is CS2.
Here's a snippet from my rather scary system log for yesterday, when I was attempting to run a batch process in illustrator...my logs are peppered with graphics chip errors every time that I use CS2. Any options other than wait for a new gfx driver from Apple or keep re-running the hardware tests?
Feb 5 03:15:01 bourbon cp: error processing extended attributes: Operation not permitted
Feb 5 08:55:06 bourbon ntpd[158]: time reset 0.443060 s
Feb 5 18:27:49 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 18:27:51 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 18:27:51 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 18:28:19 bourbon /Applications/Adobe Illustrator CS2/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator: Emergency Save Failed
Feb 5 22:59:03 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:44 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:45 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:52 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:56 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:56 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:58 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:58 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:04 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:07 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:07 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:08 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:15 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:16 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:19 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:20 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:21 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:21 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:22 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:22 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:22 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:23 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:23 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:23 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:24 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:27 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:27 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:28 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:30 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:31 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:32 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:35 bourbon /Applications/Adobe Illustrator CS2/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator: Emergency Save Failed
Feb 5 23:37:58 bourbon crashdump[828]: Adobe Illustrator crashed
PowerMac G5 Mac OS X (10.4.8)
PowerMac G5 Mac OS X (10.4.8) CS2, nvidia 6800 GT, kernel panicHere are the relevant snippets from panic log...I got a new wacom tablet in January. From the logs, it looks like 1 USB panic and 2 gfx driver panics this year....
Sun Jan 14 18:41:43 2007
panic(cpu 3 caller 0x0003FFE8): zalloc: "ipc kmsgs" (3061024 elements) retry fail 3
Latest stack backtrace for cpu 3:
Backtrace:
0x00095138 0x00095650 0x00026898 0x0003FFE8 0x0001A308 0x0001AA8C 0x000295B0 0x002E84C4
0x002BD140 0x002BD294 0x002BF230 0x00446A0C 0x004D0E08 0x002EB00C 0x0008C318 0x0002921C
0x000233F8 0x000ABAAC 0x6B3C2F73
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBUserClient(2.5.0)@0x4cc000
dependency: com.apple.iokit.IOUSBFamily(2.5.6)@0x43e000
com.apple.iokit.IOUSBFamily(2.5.6)@0x43e000
Proceeding back via exception chain:
Exception state (sv=0x60BBF280)
PC=0x9000AB48; MSR=0x0000D030; DAR=0x36CE7000; DSISR=0x42000000; LR=0x9000AA9C; R1=0xF0080A20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
Sun Jan 14 22:14:00 2007
Unresolved kernel trap(cpu 3): 0x300 - Data access DAR=0x000000007970E34E PC=0x0000000000939D3C
Latest crash info for cpu 3:
Exception state (sv=0x60C3BA00)
PC=0x00939D3C; MSR=0x00009030; DAR=0x7970E34E; DSISR=0x40000000; LR=0x00939D24; R1=0x4684BB40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00949814 0x00922EE0 0x002E8A34 0x002EA900 0x0008BEC4
0x0002921C 0x000233F8 0x000ABAAC 0x4D697861
backtrace terminated - frame not mapped or invalid: 0xBFFFE050
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Proceeding back via exception chain:
Exception state (sv=0x60C3BA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x60988500)
PC=0x9000AB48; MSR=0x0200F030; DAR=0x3715D000; DSISR=0x42000000; LR=0x9000AA9C; R1=0xBFFFE050; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 3 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 3:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x60C3BA00)
PC=0x00939D3C; MSR=0x00009030; DAR=0x7970E34E; DSISR=0x40000000; LR=0x00939D24; R1=0x4684BB40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00949814 0x00922EE0 0x002E8A34 0x002EA900 0x0008BEC4
0x0002921C 0x000233F8 0x000ABAAC 0x4D697861
backtrace terminated - frame not mapped or invalid: 0xBFFFE050
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Exception state (sv=0x60988500)
PC=0x9000AB48; MSR=0x0200
Sun Feb 4 13:53:46 2007
Unresolved kernel trap(cpu 3): 0x300 - Data access DAR=0x000000007BA1A34E PC=0x0000000000939E14
Latest crash info for cpu 3:
Exception state (sv=0x61ACE500)
PC=0x00939E14; MSR=0x00009030; DAR=0x7BA1A34E; DSISR=0x40000000; LR=0x0093A82C; R1=0x46753AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0093B6C4 0x0093A82C 0x00935D5C 0x00922C74 0x002E8A34 0x002EA900
0x0008BEC4 0x0002921C 0x000233F8 0x000ABAAC 0x3C3C3C3C
backtrace terminated - frame not mapped or invalid: 0xBFFFE240
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Proceeding back via exception chain:
Exception state (sv=0x61ACE500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x60D3C000)
PC=0x9000AB48; MSR=0x0200F030; DAR=0x01852808; DSISR=0x0A000000; LR=0x9000AA9C; R1=0xBFFFE240; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 3 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 3:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x61ACE500)
PC=0x00939E14; MSR=0x00009030; DAR=0x7BA1A34E; DSISR=0x40000000; LR=0x0093A82C; R1=0x46753AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0093B6C4 0x0093A82C 0x00935D5C 0x00922C74 0x002E8A34 0x002EA900
0x0008BEC4 0x0002921C 0x000233F8 0x000ABAAC 0x3C3C3C3C
backtrace terminated - frame not mapped or invalid: 0xBFFFE240
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Exception state (sv=0x60D3C000)
PC0
PowerMac G5 Mac OS X (10.4.8) -
Default kernel config question: acpi video freezes my laptop
Hi,
I have a Samsung X60 laptop that freezes when the acpi video module is loaded. The default Arch kernel config (and the derived suspend2 one) includes as built-in some of the acpi code (including the video bit). I'm interested to learn why they are included as built in, and if there is a way to selectively skip the acpi video built-in bit of code? (more selectively than acpi=off as a kernel parameter). Would it be reasonable to request a change to the default kernel config?
cheersbugs.archlinux.org to make sure its fixed.
the acpi video module is reasonably new and it can be compiled as a module iirc, so it shouldnt be any harm to have it compiled as such.
James -
Custom kernel not detecting usb.
I built custom kernel (kernel26mm) and when I boot it it doesn't detect USB.
[dheart@lightbringer dheart]# cd /proc/bus/usb
bash: cd: /proc/bus/usb: No such file or directory
[dheart@lightbringer ~]$ lsusb
[dheart@lightbringer ~]$
and the out of lsusb on arch's kernel is:
[dheart@lightbringer ~]$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 003: ID 04e8:3268 Samsung Electronics Co., Ltd
Bus 003 Device 002: ID 046d:c00e Logitech, Inc. M-BJ69 Optical Wheel Mouse
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0c10:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
What do I need to do?Dheart wrote:
# CONFIG_USB_SUPPORT is not set
I think that explains a lot of things...
Well... there ya go -
Error: nvidia driver and custom kernel [SOLVED]
Hello guys , I have compiled custom kernel with wiki help and abs and want to install Nvidia driver, but i got the following error when I try to compile with abs..
==> Obteniendo Fuentes...
-> Se encontró NVIDIA-Linux-x86-256.35.run
==> Validando el archivo fuente con md5sums...
NVIDIA-Linux-x86-256.35.run ... Aprobado
==> Descomprimiendo fuentes...
==> Iniciando build()...
Creating directory NVIDIA-Linux-x86-256.35
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86 256.35............................................................................................................................
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
make: *** [select_makefile] Error 1
Abortando...
my nvidia.install
post_install() {
KERNEL_VERSION='2.6.34-pahko'
depmod $KERNEL_VERSION
post_upgrade() {
post_install
rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
post_remove() {
KERNEL_VERSION='2.6.34-pahko'
depmod $KERNEL_VERSION
my PKGBUILD
# $Id: PKGBUILD 83850 2010-06-23 10:39:40Z pierre $
# Maintainer : Thomas Baechler <[email protected]>
pkgname=nvidia-pahko
pkgver=256.35
_kernver='2.6.34-pahko'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.34' 'kernel26<2.6.35' "nvidia-utils=${pkgver}")
makedepends=('kernel26-headers>=2.6.34' 'kernel26-headers<2.6.35')
conflicts=('nvidia-96xx' 'nvidia-173xx')
license=('custom')
install=nvidia.install
if [ "$CARCH" = "i686" ]; then
_arch='x86'
_pkg="NVIDIA-Linux-${_arch}-${pkgver}"
source=("ftp://download.nvidia.com/XFree86/Linux-${_arch}/${pkgver}/${_pkg}.run")
md5sums=('f6af8917a500de28396a438f3f548c88')
elif [ "$CARCH" = "x86_64" ]; then
_arch='x86_64'
_pkg="NVIDIA-Linux-${_arch}-${pkgver}-no-compat32"
source=("ftp://download.nvidia.com/XFree86/Linux-${_arch}/${pkgver}/${_pkg}.run")
md5sums=('7b5924f14a4d2326b4d916efdb7852ff')
fi
build() {
cd $srcdir
sh ${_pkg}.run --extract-only
cd ${_pkg}/kernel
make SYSSRC=/lib/modules/${_kernver}/build module
package() {
install -D -m644 $srcdir/${_pkg}/kernel/nvidia.ko \
$pkgdir/lib/modules/${_kernver}/kernel/drivers/video/nvidia.ko
install -d -m755 $pkgdir/etc/modprobe.d
echo "blacklist nouveau" >> $pkgdir/etc/modprobe.d/nouveau_blacklist.conf
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/nvidia.install
uname -r
2.6.34-pahko
anybody can help me?
thank you and sorry about my english
Last edited by pahko (2010-07-14 04:56:01)They should be in the PKGBUILD, its a split PKGBUILD currently I think.
-
How to create a custom kernel with initrd and ARCH patches
Hi,
I like the default kernel because everything seems to work well and I think the Arch kernel includes patches I need (such as the mactel patch). But some options that i would like to be enabled are not. in fact i would like to use powertop but i can't because it needs the CONFIG_TIMER_STATS option.
What I would like is a kernel based on the arch kernel but with a different config file. Nothing more.
if i look at the solution on the Wiki, I see that I have to add all patches the standard kernel have ... Moreover there is no initrd creation. i think i will need it if I use the Arch kernel configuration.
And if i use the kernel26 PKGBUILD, I must change the package name in order to keep my current kernel. It's easy to do in the PKGBUILD but much more complicated to do it in the kernel26.install file beacuse I have to change the filenames in /boot and I do not want to replace the kernel26 files.
So do you have any ideas how to compile my custom kernel ? Is there a better solution ?
Thanks.
Mildred.
Last edited by mildred (2007-07-03 01:46:33)tomk wrote:It's possible I'm missing something here, but I don't understand what you're worried about. If I understand correctly, you now have a PKGBUILD and associated files for kernel26mildred (or whatever you've decided to call it). Why do you think you would have to change the files again when kernel26 is updated?
don't the patches change from version to version?
anyways, i was bored so i wrote a little script... edit the configuration variables at the top and it'll do the work for you. just put it in /var/abs/kernels or wherever you have the kernel26/ at, chmod +x scriptname, and run.
if you're in /var/abs/kernels you'll probably have to run as root.
from my testing, it seems to be all working (looking at resulting files and no errors so far from makepkg); but i'm still building my test kernel with it.
#!/bin/bash
# Author: kano <[email protected]>
# Configuration #
appendname="-custom1" # Name to append to kernel package
BUILD=0 # Build package when done? No = 0; Yes = 1
#MAKEPKGOPT="" # Uncomment if you're building after you make; Add any options you want passed to makepkg (can be nothing)
# Work starts here; shouldn't have to edit anything below #
mkdir kernel26${appendname}/
cp kernel26/* kernel26${appendname}/
regen_md5sum() {
if [ ${file} != 'PKGBUILD' ]; then
echo "Regenerating md5sum for ${file}"
cat kernel26${appendname}/PKGBUILD \
| sed "s/'`md5sum kernel26/${file} | awk '{ print $1 }'`'/'`md5sum kernel26${appendname}/${file} | awk '{ print $1 }'`'/;" \
> PKGBUILD.tmp
mv PKGBUILD.tmp kernel26${appendname}/PKGBUILD
fi
for file in "PKGBUILD" "kernel26.preset" "kernel26.install"; do
echo "Editing ${file}"
cat kernel26/${file} | \
sed "s/kernel26/kernel26${appendname}/g" \
| sed "s/vmlinuz26/vmlinuz26${appendname}/g" \
| sed "s/kconfig26/kconfig26${appendname}/g" \
| sed "s/System.map26/System.map26${appendname}/g" \
> kernel26${appendname}/${file}
# Regenerate md5sum
regen_md5sum
done
for file in "config" "config.x86_64"; do
echo "Editing ${file}"
cat kernel26/${file} | \
sed "s/CONFIG_LOCALVERSION=\"-ARCH\"/CONFIG_LOCALVERSION=\"-ARCH${appendname}\"/" \
> kernel26${appendname}/${file}
# Regenerate md5sum
regen_md5sum
done
mv kernel26${appendname}/mkinitcpio-kernel26.conf kernel26${appendname}/mkinitcpio-kernel26${appendname}.conf
mv kernel26${appendname}/kernel26.install kernel26${appendname}/kernel26${appendname}.install
mv kernel26${appendname}/kernel26.preset kernel26${appendname}/kernel26${appendname}.preset
# Add make menuconfig to PKGBUILD
cat kernel26${appendname}/PKGBUILD | \
sed 's/# load configuration/\n # configure kernel before build\n make menuconfig\n\n # load configuration/;' \
> PKGBUILD.tmp
mv PKGBUILD.tmp kernel26${appendname}/PKGBUILD
echo "Custom kernel pkgbuild created."
# To build or to not to build?
if [ ${BUILD} -eq 1 ]; then
cd kernel26${appendname}
makepkg ${MAKEPKGOPT}
fi -
Strange error compiling a custom kernel...
Here is the error i get when compiling a custom kernel (i tried both 2.6.22 from core and 2.6.23 from testing):
init/built-in.o: In function 'start_kernel':
(.init.text.0x836): undefined reference to 'early_populated_rootfs'
make: *** [.tmp_vmlinuz1] Error 1
i have no idea of what it the problem, the config file it's the same i've used for all my 2.6.22 kernels, any idea?
Thank you.This kind of error is when you forget to add a source file to gcc comand line during compilation. I think that problem might be in one of broken Makefiles in kernel tree. Maybe some patch messed with them. Try to download fresh kernel sources.
-
Custom Kernel Build Help + Errors
Hi,
I hope everyone is doing well. I am a newbie and I have been trying to create a custom Kernel with the following steps
1- sudo pacman -Syu
2- reboot
3- download https://www.kernel.org/pub/linux/kernel … .37.tar.xz
4- tar -xvJf linux-3.14.37.tar.xz
5- sudo pacman -S bc
6- make mrproper
7- zcat /proc/config.gz > .config
8- make menuconfig -->
General setup --->
append to kernel release 'emraldinho'
9- make -j4
10- sudo make modules_install
After step 10 I get the following error:
DEPMOD 3.14.37-emraldinho
depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
Any ideas what's going on here? I tried doing it over a few times, but it does not seem to help
Thanks in advance!Thank you. I am trying to get it done for my own learning I guess.
I was thinking if I just echoed each command one by one, would that not get it done?
I guess I have to check if any of the commands are puking out an error though
snakeroot wrote:
emraldinho wrote:
Thank you for the responses.
I want to write a bash script that does this, is there anything specific that I have to pay attention to, or can I just echo these commands one by one?
Thanks!
Here's what I use; note that it is for a somewhat non-standard gummiboot install and has a few other peculiarities, but hopefully you may find it vaguely useful. Obviously, you break your system, you keep the pieces.
#!/bin/bash
MKFLG="-j5"
cp -r "$(pwd)" /tmp
cd /tmp/"$(basename $(pwd))"
make kernelrelease
kn=$(make kernelrelease)
gb="/mnt/sda1/loader/entries"
ko=$(uname -r)
usl="/usr/src/${kn}"
ax="arch/x86"
uslax="${usl}/${ax}"
time make $MKFLG all
sudo make modules_install
# make headers_install
sudo install -v -m=644 arch/x86/boot/bzImage /boot/vmlinuz-"${kn}".efi
sudo install -v -m=644 System.map "/boot/System.map-${kn}"
sudo install -v -m=644 .config /boot/config-"${kn}"
sudo mkinitcpio -k "${kn}" -g /boot/initramfs-"${kn}".img
sudo cp -v /boot/System.map-"${kn}" /boot/System.map
sudo cp -v "${gb}/Arch_${ko}.conf" "${gb}/Arch_${kn}.conf"
sudo sed -i -e "s:${ko}:${kn}:g" "${gb}/Arch_${kn}.conf"
sudo mkdir -pv "${usl}"
for i in "Makefile" "kernel/Makefile" ".config"; do
sudo install -Dv -m644 "${i}" "${usl}/${i}"
done
sudo mkdir -pv "${usl}/include"
for i in acpi asm-generic config crypto drm generated linux math-emu \
media net scsi sound trace uapi video xen; do
sudo cp -a include/${i} "${usl}/include/"
done
sudo mkdir -pv "${uslax}"
sudo cp -a "${ax}/include" "${uslax}/"
sudo cp Module.symvers "${usl}"
sudo cp -a scripts "${usl}"
sudo chmod og-w -R "${usl}/scripts"
sudo mkdir -p "${usl}/.tmp_versions"
sudo mkdir -p "${uslax}/kernel"
sudo cp "${ax}/Makefile" "${uslax}/"
sudo cp "${ax}/kernel/asm-offsets.s" "${uslax}/kernel/"
sudo install -D -m644 Documentation/DocBook/Makefile "${uslax}/Documentation/DocBook/Makefile"
sudo mkdir -p "${uslax}/drivers/md"
sudo cp drivers/md/*.h "${uslax}/drivers/md"
# mkdir -p "${usl}/include/linux"
# cp include/linux/inotify.h "${us}/include/linux/"
sudo mkdir -p "${usl}/fs/xfs"
sudo mkdir -p "${usl}/mm"
sudo cp fs/xfs/xfs_sb.h "${usl}/fs/xfs/xfs_sb.h"
for i in $(find . -name 'Kconfig*'); do
sudo mkdir -p "${usl}/$(echo ${i} | sed 's|/Kconfig.*||')"
sudo cp ${i} "${usl}/${i}"
done
sudo chown -R root.root "${usl}"
sudo find "${usl}" -type d -exec chmod 755 {} \;
sudo find "${usl}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
sudo /usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
sudo /usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
sudo /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
for i in source build; do
sudo rm -r "/usr/lib/modules/${kn}/${i}"
sudo ln -sf "${usl}" "/usr/lib/modules/${kn}/${i}"
done -
Optimizing system for best performance/stability and a custom kernel
I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
Thanks.
Dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
[ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
[ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
[ 0.000000] 0000000000 - 007dc00000 page 2M
[ 0.000000] 007dc00000 - 007dd31000 page 4k
[ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 37492000 - 37a41000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
[ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 000000007eecc000 00040
[ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007dd31000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
[ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dd31
[ 0.000000] On node 0 totalpages: 515264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7989 pages used for memmap
[ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 2 loops
[ 0.000000] Detected 2393.995 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
[ 0.010013] pid_max: default: 32768 minimum: 301
[ 0.010061] Security Framework initialized
[ 0.010069] AppArmor: AppArmor disabled by boot time parameter
[ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012201] Mount-cache hash table entries: 256
[ 0.012567] Initializing cgroup subsys cpuacct
[ 0.012573] Initializing cgroup subsys memory
[ 0.012588] Initializing cgroup subsys devices
[ 0.012592] Initializing cgroup subsys freezer
[ 0.012595] Initializing cgroup subsys net_cls
[ 0.012599] Initializing cgroup subsys blkio
[ 0.012653] CPU: Physical Processor ID: 0
[ 0.012656] CPU: Processor Core ID: 0
[ 0.012660] mce: CPU supports 6 MCE banks
[ 0.012673] CPU0: Thermal monitoring enabled (TM2)
[ 0.012679] using mwait in idle threads.
[ 0.015816] ACPI: Core revision 20120320
[ 0.021231] ftrace: allocating 17820 entries in 70 pages
[ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.066663] ... version: 2
[ 0.066663] ... bit width: 40
[ 0.066663] ... generic registers: 2
[ 0.066663] ... value mask: 000000ffffffffff
[ 0.066663] ... max period: 000000007fffffff
[ 0.066663] ... fixed-purpose events: 3
[ 0.066663] ... event mask: 0000000700000003
[ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.103350] Booting Node 0, Processors #1 Ok.
[ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.116575] Brought up 2 CPUs
[ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
[ 0.120053] devtmpfs: initialized
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
[ 0.123629] NET: Registered protocol family 16
[ 0.123872] ACPI: bus type pci registered
[ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.153700] PCI: Using configuration type 1 for base access
[ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
[ 0.153901] mtrr: corrected configuration.
[ 0.154568] bio: create slab <bio-0> at 0
[ 0.154568] ACPI: Added _OSI(Module Device)
[ 0.154568] ACPI: Added _OSI(Processor Device)
[ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
[ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160625] ACPI: Dynamic OEM Table Load:
[ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161153] ACPI: Dynamic OEM Table Load:
[ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: Dynamic OEM Table Load:
[ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161187] ACPI: Dynamic OEM Table Load:
[ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161220] ACPI: Interpreter enabled
[ 0.161220] ACPI: (supports S0 S3 S4 S5)
[ 0.161220] ACPI: Using IOAPIC for interrupt routing
[ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173981] ACPI: No dock devices found.
[ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.175505] PCI host bridge to bus 0000:00
[ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
[ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
[ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
[ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
[ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
[ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
[ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
[ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
[ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
[ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
[ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
[ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
[ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
[ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
[ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
[ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
[ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
[ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
[ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
[ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
[ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
[ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
[ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
[ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
[ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
[ 0.176140] pci 0000:02:00.0: supports D1 D2
[ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
[ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
[ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.184581] pci 0000:03:00.0: supports D1 D2
[ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
[ 0.185056] pci 0000:04:03.0: supports D1 D2
[ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196707] vgaarb: loaded
[ 0.196709] vgaarb: bridge control possible 0000:00:02.0
[ 0.196788] PCI: Using ACPI for IRQ routing
[ 0.197237] PCI: pci_cache_line_size set to 64 bytes
[ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
[ 0.197573] NetLabel: Initializing
[ 0.197576] NetLabel: domain hash size = 128
[ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197601] NetLabel: unlabeled traffic allowed by default
[ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210013] Switching to clocksource hpet
[ 0.222129] pnp: PnP ACPI init
[ 0.222158] ACPI: bus type pnp registered
[ 0.222675] pnp 00:00: [bus 00-ff]
[ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223455] pnp 00:02: [io 0x0300-0x031f]
[ 0.223473] pnp 00:02: [irq 6]
[ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.223606] pnp 00:03: [io 0x0000-0x001f]
[ 0.223610] pnp 00:03: [io 0x0081-0x0091]
[ 0.223614] pnp 00:03: [io 0x0093-0x009f]
[ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
[ 0.223621] pnp 00:03: [dma 4]
[ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.223883] pnp 00:05: [irq 0 disabled]
[ 0.223893] pnp 00:05: [irq 8]
[ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.224028] pnp 00:06: [io 0x00f0]
[ 0.224038] pnp 00:06: [irq 13]
[ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.224132] pnp 00:07: [io 0x002e-0x002f]
[ 0.224136] pnp 00:07: [io 0x004e-0x004f]
[ 0.224139] pnp 00:07: [io 0x0061]
[ 0.224142] pnp 00:07: [io 0x0063]
[ 0.224145] pnp 00:07: [io 0x0065]
[ 0.224149] pnp 00:07: [io 0x0067]
[ 0.224151] pnp 00:07: [io 0x0070]
[ 0.224154] pnp 00:07: [io 0x0080]
[ 0.224157] pnp 00:07: [io 0x0092]
[ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.224164] pnp 00:07: [io 0x0680-0x069f]
[ 0.224167] pnp 00:07: [io 0x0800-0x080f]
[ 0.224170] pnp 00:07: [io 0x0810-0x0817]
[ 0.224173] pnp 00:07: [io 0x0400-0x047f]
[ 0.224177] pnp 00:07: [io 0x0500-0x053f]
[ 0.224180] pnp 00:07: [io 0x1640-0x164f]
[ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224346] pnp 00:08: [io 0x0070-0x0077]
[ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228737] pnp: PnP ACPI: found 9 devices
[ 0.228741] ACPI: ACPI bus type pnp unregistered
[ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
[ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
[ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
[ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
[ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
[ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
[ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
[ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
[ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
[ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
[ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
[ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
[ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.238088] NET: Registered protocol family 2
[ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.241999] TCP: reno registered
[ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242207] NET: Registered protocol family 1
[ 0.242239] pci 0000:00:02.0: Boot video device
[ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.242662] Unpacking initramfs...
[ 0.452648] Freeing initrd memory: 5820k freed
[ 0.456693] audit: initializing netlink socket (disabled)
[ 0.456719] type=2000 audit(1340724146.456:1): initialized
[ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.460514] VFS: Disk quotas dquot_6.5.2
[ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460751] msgmni has been set to 3939
[ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.461121] io scheduler noop registered
[ 0.461125] io scheduler deadline registered
[ 0.461224] io scheduler cfq registered (default)
[ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.462374] vesafb: scrolling: redraw
[ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
[ 0.508030] Console: switching to colour frame buffer device 128x48
[ 0.551844] fb0: VESA VGA frame buffer device
[ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
[ 0.551868] intel_idle: does not run on family 6 model 23
[ 0.551930] GHES: HEST is not enabled!
[ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.552762] Linux agpgart interface v0.103
[ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.553759] i8042: No controller found
[ 0.553878] mousedev: PS/2 mouse device common for all mice
[ 0.553966] rtc_cmos 00:08: RTC can wake from S4
[ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.554221] cpuidle: using governor ladder
[ 0.554225] cpuidle: using governor menu
[ 0.554454] TCP: cubic registered
[ 0.554641] NET: Registered protocol family 10
[ 0.554976] NET: Registered protocol family 17
[ 0.554983] Registering the dns_resolver key type
[ 0.555206] PM: Hibernation image not present or could not be loaded.
[ 0.555216] registered taskstats version 1
[ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
[ 0.556299] Initializing network drop monitor service
[ 0.558944] Freeing unused kernel memory: 740k freed
[ 0.559290] Write protecting the kernel read-only data: 8192k
[ 0.568413] Freeing unused kernel memory: 1588k freed
[ 0.572710] Freeing unused kernel memory: 640k freed
[ 0.586045] udevd[40]: starting version 185
[ 0.590818] [drm] Initialized drm 1.1.0 20060810
[ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.595444] ACPI: Lid Switch [LID0]
[ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.595547] ACPI: Power Button [PWRB]
[ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.595639] ACPI: Sleep Button [SLPB]
[ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.595769] ACPI: Power Button [PWRF]
[ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.602545] i915 0000:00:02.0: setting latency timer to 64
[ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.749370] [drm] Driver supports precise vblank timestamp query.
[ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.117606] [drm] initialized overlay support
[ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
[ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.299886] Console: switching to colour dummy device 80x25
[ 1.301293] fbcon: inteldrmfb (fb0) is primary device
[ 1.430434] Console: switching to colour frame buffer device 160x50
[ 1.435865] fb0: inteldrmfb frame buffer device
[ 1.435868] drm: registered panic notifier
[ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.456705] Switching to clocksource tsc
[ 1.821716] usbcore: registered new interface driver usbfs
[ 1.821753] usbcore: registered new interface driver hub
[ 1.826806] usbcore: registered new device driver usb
[ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
[ 1.842320] SCSI subsystem initialized
[ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.845354] hub 1-0:1.0: USB hub found
[ 1.845362] hub 1-0:1.0: 4 ports detected
[ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
[ 1.851193] libata version 3.00 loaded.
[ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.860280] hub 2-0:1.0: USB hub found
[ 1.860289] hub 2-0:1.0: 6 ports detected
[ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
[ 1.860750] hub 3-0:1.0: USB hub found
[ 1.860757] hub 3-0:1.0: 2 ports detected
[ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
[ 1.861172] hub 4-0:1.0: USB hub found
[ 1.861178] hub 4-0:1.0: 2 ports detected
[ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 1.861578] hub 5-0:1.0: USB hub found
[ 1.861585] hub 5-0:1.0: 2 ports detected
[ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
[ 1.862003] hub 6-0:1.0: USB hub found
[ 1.862010] hub 6-0:1.0: 2 ports detected
[ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 1.862411] hub 7-0:1.0: USB hub found
[ 1.862417] hub 7-0:1.0: 2 ports detected
[ 1.862917] ata_piix 0000:00:1f.1: version 2.13
[ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.869158] scsi0 : ata_piix
[ 1.874884] scsi1 : ata_piix
[ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
[ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
[ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.881780] scsi2 : ata_piix
[ 1.887944] scsi3 : ata_piix
[ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
[ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
[ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
[ 2.065117] ata1.00: configured for UDMA/66
[ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
[ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
[ 2.077869] ata3.00: configured for UDMA/133
[ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
[ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
[ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.184707] sda3: <bsd:bad subpartition - ignored
[ 2.184709] bad subpartition - ignored
[ 2.184710] bad subpartition - ignored
[ 2.184712] bad subpartition - ignored
[ 2.184713] >
[ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
[ 2.948381] usbcore: registered new interface driver usbhid
[ 2.948385] usbhid: USB HID core driver
[ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[ 5.022890] udevd[198]: starting version 185
[ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
[ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
[ 5.562558] applesmc: init_smcreg() took 50 ms
[ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
[ 5.658889] lib80211: common routines for IEEE802.11 drivers
[ 5.658894] lib80211_crypt: registered algorithm 'NULL'
[ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
[ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
[ 5.924364] Disabling lock debugging due to kernel taint
[ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
[ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
[ 6.084085] Linux media interface: v0.10
[ 6.133183] iTCO_vendor_support: vendor-support=0
[ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
[ 6.164216] ACPI: Requesting acpi_cpufreq
[ 6.173706] Monitor-Mwait will be used to enter C-1 state
[ 6.178506] Monitor-Mwait will be used to enter C-2 state
[ 6.183424] Monitor-Mwait will be used to enter C-3 state
[ 6.183457] Marking TSC unstable due to TSC halts in idle
[ 6.183507] ACPI: acpi_idle registered with cpuidle
[ 6.183963] Switching to clocksource hpet
[ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.338786] Linux video capture interface: v2.00
[ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 6.429831] usbcore: registered new interface driver uvcvideo
[ 6.429835] USB Video Class driver (1.1.1)
[ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 6.587003] sky2: driver version 1.30
[ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
[ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
[ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.942266] appletouch: Geyser mode initialized.
[ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
[ 6.942768] usbcore: registered new interface driver appletouch
[ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
[ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
[ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
[ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 7.423516] usb 3-1: USB disconnect, device number 2
[ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 8.322211] Bluetooth: Core ver 2.16
[ 8.322655] NET: Registered protocol family 31
[ 8.322660] Bluetooth: HCI device and connection manager initialized
[ 8.322665] Bluetooth: HCI socket layer initialized
[ 8.322669] Bluetooth: L2CAP socket layer initialized
[ 8.322680] Bluetooth: SCO socket layer initialized
[ 8.359817] usbcore: registered new interface driver btusb
[ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
[ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.845740] Bluetooth: RFCOMM TTY layer initialized
[ 11.845751] Bluetooth: RFCOMM socket layer initialized
[ 11.845755] Bluetooth: RFCOMM ver 1.11
[ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
[ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
[ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 29.363373] wlan0: no IPv6 routers present
[ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
[ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
[ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.563473] wlan0: no IPv6 routers present
[ 45.535875] fuse init (API version 7.18)
[ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 70.867639] ISO 9660 Extensions: RRIP_1991A
[ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Skopje"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_GB.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(applesmc wl uvcvideo)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=stefan.local
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
ThanksArmy wrote:
This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
[repo-ck]
Server = http://repo-ck.com/$arch
(this has to go to the bottom of /etc/pacman.conf)
(use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
Edit: I will first try linux-lqx...
Last edited by exapplegeek (2012-06-26 18:33:31)
Maybe you are looking for
-
Help needed regarding the deployment architecture for PROD env
Dear All, Please help me with some clarifications regarding the deployment architecture for PROD env. As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively. Shortly I will be having a PROD env of 12.1.1 with one DB nod
-
Hi, my spotify says that I need to change the country on my profile because it isn't the same as I`m in right now.That's what I wanted to do but I can't change the country. There is only the USA as an option but I'm living in Germany.I also tried the
-
Cloning a Track for the Opposite Stereo Channel
Hey folks, quick question: So I did some recording this past weekend, but unfortunately, when I imported it all into GarageBand, I found that the audio had only been recorded into the left stereo channel (meaning if you were wearing headphones, you'd
-
I'm running OS X version 10.4.11. Is it possible to download Boot Camp, or do I need to upgrade to Leopard?
-
Duplicate Files Question - Need Expert Advice . . .
I have completed my transition from PC to Mac and have all of my files running on my MacBook Pro. I have synced my iPod Classic to iTunes and have noticed that when I click on "Music" from the iTunes Library the number of files at the bottom states "