Custom Label Printing Using BI Publisher

I looked at the example of AveryLabel3x10, But I need to do for 4x8 labels with each label size 2'' W x 1.25'' H on A4 Sheet, Each label as gap of .063''. I tried to extend the above example but couldn't do it. Any help is higly appreciated.
Thanks in Advance
Raj.

You can get it from here http://blogs.oracle.com/xmlpublisher/templates/xsl/

Similar Messages

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

How to print custom label print after Pick drop happen

Dear All,
I have a requirement,
Have to print the custom label printing report after pick drop happening.
can you please suggest how to do this, Seems there is no workflow business event or other methods. please suggest to how do achieve this.
Thanks in advance.
Thanks
satya

You know, in a user exit or a BADi you can access any variable of the program you want.
Just find what which program calls the Exit User, put a break-point in it, and find the variable you need to access.
Then add this kind code in your Exit :
DATA: l_var TYPE ....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)variable') TO <fs_var>.
IF sy-subrc = 0.
l_var = <fs_var>.
ENDIF.
Same thing for a table :
DATA: lt_var TYPE TABLE OF....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)table[]') TO <fs_var>.
IF sy-subrc = 0.
lt_var[] = <fs_var>.
LOOP AT lt_var ASSIGNING ...
ENDLOOP.
ENDIF.

Custom Label Printing - Print position creeps up and across labels

Hello
I am using VS 2010 and have updated to SP4 for Crystal Reports
I used the custom size option to make a label report. The built in options for label sheets do not match the labels that I have
I made a label report for 3 columns and 8 rows using the label size, margin widths top and bottom, left and right, with the 2 widths between the columns. But this does not print correctly on the labels. The printing on the label rows creep up so by the time you reach the 8th row the label is partly on the 7th Row. The left hand column prints correctly. the middle column prints closer to the left edge of the label than in the first column and the third column is printing on the gap between the 2nd and 3rd column.
I tried making a new report and set the dimensions to the maximum sizes that would allow 24 labels (3 columns and 8 rows) but the same problem occurs as when having set the correct sizes
I am not sure if there is a method to edit the label sizes, and margin widths as happens when creating a new report or if the only option is to create a new report.
Any assistance or information on how to make the labels print with the correct row and column spacing would be appreciated.
My Labels are 67mm x 36mm. there is no space betwwen the rows, the margin at the top and bottom of the sheet are the same, and the left and right margins are the same. The space between the columns is 2mm

Thank you for the reply Rob
There is no Avery template in the list that has 24 labels, which is why I was using the Custom Label
I have tried many variations trying different widths and gaps between the labels, but in all cases by the time the 8th row is printeed the printing has crept up and is now overlapping onto the bottom of the 7th row label. The third column is printing on the gutter between the 2nd and 3rd column.
When creating a Custom label it would appear that the Wizard works on Letter size Paper regardless of the paper size that the printer is set to. All my printers are set to A4 size paper.
Letter Paper is 215.9mm x 279.4mm compared to 210mm x 297mm for A4. While the width is not a problem the length is less, and that may well be what is causing the problem when the Wizard creates the labels, despite changing the Paper size to A4. But the paper size can only be changed and set to A4 after the wizard has been given the label size and spacing for margins and gutters.
In my view the Wizard should ask for the paper size and then ask for the label size settings and layout
Regards
David

WM Custom Label Printing??

Hi,
We got a req as follows:
We created a new IM mvt type [copy of 311] which is mapped to a new WM mvt type 911. Whenver we do MB1B, T.O is created automatically.
Once the T.O is created I need to print a "custom label" for this?? How to do that.
Also, If the T.O has 2 line items
Line Item 1: MatXXXX 10EA
Line Item 2: MatYYYY 10EA
Then it need to print 20 custom labels.
Please advice.

Hi Oisin,
Thanks for the reply.
I had already had a look into Note#771683 which doesn't full fill my requirement.
My actuall requirement is to do label printing through a wireless printer when the user clicks on print from the ITSMobile.
I have an idea of creating an output device with Access method as S(Print using SAP Protocol) and maintian destination host as ip address of the system(with SAPLpd running) in which my wireless printer is connected .When i click on print from ITSMobile a spool will be created with the particular output device , which further goes to the wireless printing.
Do you have any other solution.Kindly suggest.
Regards,
Thyagu.

PDF Printing using BI Publisher

Hello,
I'm using APEX 4.2 and trying to export some classic reports to PDF. I followed these directions to install BI Publisher:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html
Entered these values in the Apex Aministration Report Settings section:
Print Server: BI Publisher
Print Server Protocol: HTTP
Print Server Host Address: http://TOSHIBAUSER-PC:9704/xmlpserver (also tried with localhost and failed)
Print Server Port: 9704
Print Server Script: /xmlpserver/convert
Back in my Classic Report, I configured these settings in the Print Attributes tab:
Response Header: Report Settings (also tried with Print Server and failed)
Print URL: f?p=&APP_ID.:7:&SESSION.:FLOW_XMLP_OUTPUT_R7671716059006280
I'm getting this error:
report error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Can anyone tell me what I'm doing wrong? I have never configured PDF printing this way and am pretty lost.
Thanks,
John

hi Johnny98 ,
we implemeneted the same environment Apex 4.1 and BI publisher 11g,using JS script from Apex as Dynamic ACTION .
please following steps..
BI side
http://www.oraclevadakadu.blogspot.com/2012/03/oracle-bi-publisher-11g.html
I will try to give english post on this week.
in Apex side.
1.create button with dynamic action
2.create dynamic action
3.Event : Click
4.Selection type:Button
5.button: invoke BI print
6.Action: Exe JS script
7.code:JS script include passing parameter from Apex item.
Thanx,
Ram

BarTender for Zebra Barcode Label printing using Smartform

HI Experts,
Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
I have to include a jpg Logo into the Label using BarTender.
But when I test using the Zebra printer - the logo/picture won't print out.
Any idea?
Thank You.
Best Regards,
CW

Hi There,
I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software, they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap. See if they can help you. :~)
Good luck.
Dave.

Printing a custom greeting card using microsoft publisher 2007

when I print my greeting card on 8.5x11 paper quarter fold it cuts off part of the border or text and or picture. I've tried to change paper setting or print setup. It says print A4 what is this ?? My paper is just standard 8.5x11 please HELP

They'll help you over here.
http://answers.microsoft.com/en-us/office/forum/office_2007-publish?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1422144752406
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Label printing using Markpoint

Hi,
Has anybody worked with Markpoint MP 160 , MKII series printers & successfully integrated the same with SAP to print labels ? How to go about ? What should be the device type ?
This is a thermal printer & the stationery is the adhesive type.
Does printer port have any significance, normally printers are connected to LPT port but this printer is connected to COM2 port which is a serial port.
Regards,

Hi,
is you want to use Zebra-Printers you need to have a CUPS-Infrastructure (for BI Publisher Standalone), which converts your output to ZPL. To get Barcode output you need to register your barcode font on the server. Have a look at http://www.oracle.com/technology/products/xml-publisher/demoshelf/viewlets/TemplateBuilder-AddingExternalFonts.html to see how to add your Barcode-Font and use it.
Regards
Rainer

Label-print using po qty-how to print using unit of measurement from po

I have a report that's using the po qty to determine the amount of lables to print.
However, this does not work for items when they are ordered by conversion factors other than 1. What I need help with it how to get my qty of my conversion to make it print the amount i need - some examples of orders
1- bx10 - (1 box of 10 per box) - need 10 tags(conversion is 10)
12- bags - work fine with this one - need 12 tags (conversion is 1 here)
3- bag100 (3 bags of 100 per bag) - this one i only need 3 tags(conversion is 100 but only need 2 tags because items are in a 3 bags rather then 300 individual item ( this might be a issue) This will print correctly but if a conversion is added that factors it in - i may get 300 labels which i dont need
as you can see i have different conversion for most every type of item I order.
This method seems to get close to what I need - as do other label reports I have- I thought I would feel this method out since the conversion problem seems a rather simple fix.
here is what I have for my sql query and then my select statement:
As stated I need somehow to have the conversion from the po added into the report to determine the amount of labels to print
max40385
SELECT "INVENTORY"."ITEMNUM", "INVENTORY"."ORDERUNIT",
"INVENTORY"."BINNUM", "INVENTORY"."MODELNUM",
"ITEM"."DESCRIPTION", "POLINE"."ITEMNUM",
"POLINE"."ENTERDATE", "POLINE"."PONUM", "POLINE"."ORDERQTY"
FROM "MAXIMO"."INVENTORY" "INVENTORY",
"MAXIMO"."POLINE" "POLINE", "MAXIMO"."ITEM" "ITEM"
WHERE ("INVENTORY"."ITEMNUM"="POLINE"."ITEMNUM") AND ("POLINE"."ITEMNUM"="ITEM"."ITEMNUM") AND
"POLINE"."PONUM"='24142' AND "POLINE"."ITEMNUM"='1201020021N'
EXTERNAL JOIN POLINE.ORDERQTY>={?C:\Documents and Settings\kpowell\My Documents\test table.xls: Sheet1_.Column1}
C:\Documents and Settings\kpowell\My Documents\test table.xls
SELECT `Sheet1_`.`Column1`
FROM `Sheet1$` `Sheet1_`
WHERE `Sheet1_`.`Column1`<={?max40385: POLINE.ORDERQTY}

Calculate the number of labels outside of CR

LABEL printing using Thermal printers during GR for a PO

Hi
Can you pl. let me know the steps involved to print a label on thermal printer
when GR is made against a PO.
appreciate if you can provide me with detailed steps
Thanks
Prasanna
Edited by: B.A.PRASANNA KUMAR on Oct 26, 2009 11:14 AM

Hi,
The steps are described in SAP Notes #135894 and #.
The main problem with label printers is that all these printers have their own unique printer languages which are not supported by the SAP system. So Note #183777 and #135894 describe a workaround.
All print data including all printer sequences are created by an external program and uploaded into the R/3 system. As per Note #183777, this is done with Intermec's design program LabelShop PRO.
You should use device type LB_INT to print the barcode labels. The SAP system only replaces the symbols and besides that it sends the print data to the printer which was uploaded.
So you need to design the label with LabelShop PRO or another third party program for Intermec label printers. You then need to upload the label file to a standard text in transaction SO10 as described in the Notes above.
Regards,
Aidan

Visiprise 4.2 Configuration for Label Printing using Loftware

Hi All,
I have configured all the needed stuffs in the SAP ME 4.2. My requirement is to generate the .PAS file in the Visiprise-Print-Files/Temp folder.
But instead i could generate the .DAT file inside the same folder. Have done all the configurations quite right and triggered the Assembly using Assembly Operator Dashboard(AOD) using the configured Operation and the SFC's. After doing all such stuffs i couldn't generate .PAS file. I am just wondering why it is not getting generated.
Can anyone guide me whether i am on right path or not?
Please let me know if anyone need anymore info reg this.
Thanks
Praveen

Let me kick in my $.02.
I'm guessing that IT doesn't have auto-discover turned on so you're fending for yourself. In my case, I tried copying the exchange 2007 settings from another mac user at work but they didn't work. I was trying to switch from the webmail settings to newer ones and the manual method of just trying to overwrite the old didn't work.
Then I used the wizard to create a new 2007 account and autodiscover kicked in and I'm connected. What's weird is that the server settings looked exactly like what I entered manually. Go figure.
Back to your question. Before I used auto-discover, I was using web mail server information and it worked. It only used the server info without http or https stuff. Using your example, i looked like webmail.xyz.com.
One more thought. I think you may get some help looking at any other mail client settings except outlook. If you can find someone at work using Thunderbird or Outlook Express, copying their working settings can't hurt. In my experience, the settings are often the same. YMMV.
Your vpn comment is interesting. Using the webmail settings, I had to use Cisco VPN when dialing in from home. At work, it wasn't necessary. My suggestion is to test your settings at work to eliminate the VPN as a factor.
I also found Applecare to offer decent help when I previously ran into exchange issues. But if I had a magic wand, I'd get the IT people to turn on auto-discover for you based on my experiences.
Good luck.

Label print using smartforms

Is it possible to print labels based on GR qty.
Example: in my GR I have material with 100 CAR when I press print icon, the system has to print 100 Labels.
Regards
GK

Hi,
Follow the below steps.
1.Create a smart form(Z_GR_QTY_LABELS)
2.Put all the data in an internal table which has to be printed on the males.(One row corresponds to one label)
Hence the number of row in the itab are the GR qty
3.Create a loop and put the condition
To create a loop:Right click>Create Flow Logic>Loop
and put condition on Condition tab(Give sy-tabix LE Gr_qty )
4.Save and activate
Note:
Take care explicit page break.
Hope this helps you.
Regards,
Rama.

Label printing problem from Business Object Infoview

Hi,
I got a problem with printing label (roll) from Zebera Label Printer. The label is designed in CR XI which works properly printing from Crystal Report XI and Zebera printer prints labels (more then one labels) without any trouble.
But the same label (report) does not get printed with all its pages (labels) from the same Zebera Label Printer using BO infoview. It prints only one page (1st label) and stops.
It seems that BO infoview takes all the labels converted in pdf as one page. Where I want that each label should be considered as single page.
Any idea?

Thanks Don
Yes the same report is published in the BOE.
From infoview, It prints on the screen eight (8) labels in two column on one A4 size page. While I want to have each label (W=3.9in x H 2.1in) as one page printed. So that, each label can be printed as one page on label printer.
I want to print as pdf format then printing on Label Printer.
Thanks
GJ
Edited by: GuroJee on Apr 28, 2010 1:36 AM

Generating Labels Report In BI Publisher

Hi Experts,
We have a requirement to create a Label report using BI Publisher.
the lable has two static fields and three dynamic fields.
The report needs to build in left to right fashion.
As per my understanding the BI Publisher reports works in Top to Bottom Fashion.
Have any one come across such scenario. Please let me know whether it is possible to build report like this or not.
Appreciate your input.
Regards,
Andy

Hi Andy,
we can , and i need to see your template, output and xml .
drop it to me @ id in y profile location, i can help.

Custom Label Printing Using BI Publisher

Similar Messages

Maybe you are looking for