Custom layouts not found in manual, please help

Hello-
Recently purchased a 30" cinema. I can't figure out how to make a custom layout of all the paletes so it fills up the screen. I see it in the "Window" drop down. It says "Save current layout" and then the two custom presets at the top are faded back. It's probably a simple fix, so if someone would type a quick response I'd appreciate it.
Thanks,
Tom J

I actually found the page by using the Online Help in FCP. Just type Custom Layout in the search box. So yes, the page was wrong for you. Sorry.
Ok --
You must SET the custom Layout first. THEN you can use Shift-U to pull it up.
Set your windows... Option (hold) Windows... Arrange... Set Custom Layout 1
Then -- change your layout and do the same for Set Custom Layout 2 or change to one of the presets.
THEN
Shift-U
Make sense?
CaptM

Similar Messages

"Audio File "Recording#27.aif" not found" Error Message- Please HELP!

Hi Everyone-
I was opening a podcast today to finish editing it and I got this error message, "Audio File "Recording#27.aif" Not Found" - and, naturally, when I opened the project, half of a phone interview was missing (or, rather, it shows up as purple balloons but each one says "File Not Found" inside). This file is the audio from the interviewer (the interviewee file is totally fine, as are all others in the podcast). When I load the project it asks if I want to search for this missing file, but when I click yes it says that it can't be found.
How can I find this file? What happened to it? Thank you for any ideas, suggestions, etc. For reference, I'm using GarageBand 3.0.4 on a MacBook Intel Core Duo 2Ghz and Mac OS X 10.4.11

no, GB wouldn't delete anything on it's own. it only deletes files for which you've deleted the entire region from the timeline and then saved
if the file is not within the projects, i'm afraid it's gone, and i can't think of any way that could happen by itself B-(>
Well i guess I should warn others that copying and pasting is very dangerous stuff! I had two podcasts- in podcast #1 GB saved the interview file as "Recording#27.aif" and in podcast #2 GB saved a little intro clip under the same name. When I pasted the intro clip from podcast #2 into podcast #1 my interview disappeared. I didn't delete it- I was never asked about it, I didn't delete the region from the timeline, etc. I have to assume that since they had the same name, GB thought I no longer needed the "Recording#27" from podcast #1 and now I can't find it anywhere! If anyone has any suggestions as to how I could find this file I would be very appreciative.

Package not found in import --please help me

Hi,
when I try to import jack.samples.*(<%@ page import="jack.samples.*" %>)
into the jsp ,it throws me error stating
"Package jack.samples not found in import".
1)After this,added path to this jar file in classpath i.e D:\jack\samples\samples.jar
2)still,error appears.
3)Now,added this jar file to jdk lib classes. still,error appears.
can somebody throw me light on how to trouble shoot this.
Thanks
Jack

Hi,
I was able to solve the above problem ,the moment I declared the constructor
has public.Now,I am trying to retreive the Item class partno value and it
throws me "
d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_1.java:784: No method matching getPartNo&#40;&#41; found in class jack.samples.Item. temp= i.getPartNo&#40;&#41;&#59;
I wonder what could be the cause.The code of Item class is here:
package jack.samples;
import java.util.*;
public class Item {
int partno;
String mfgno;
String description;
double cost;
public Item(int p,String m,String d,double c) {
partno = p;
mfgno=m;
description=d;
cost = c;
public int getPartNo() {
     return partno;
public double getCost() {
     return cost;
The JSP code :
<%
Iterator thisLot=linkTab.iterator(); // Iterate to get all items
     while(thisLot.hasNext()) { // output all the elements
     Item i = (Item) thisLot.next();
here it fails ******     temp= i.getPartNo();
%>
Thanks
Jack

Error downloading ur purchased music - server not found...please help!!

I have been getting the above message since Saturday and I just don't know what to do - I have tried contacing my internet service provider and Apple and they have both suggested that it might be to do with my firewall but I have tried disabling that and its still the same.
I have also removed and reinstalled itunes but this hasn't made any difference.
I'd really appreciate any other ideas as to what I could do to sort this out.
Many thanks.

Okay...I was able to contact their support and they sent me the following email. However, none of their initial steps seems to work for my case. I have done each of the steps listed in Windows: http://www.info.apple.com/kbnum/n93976. I am still getting the same error. Maybe, it will work for you guys. I am have responded back to them letting them know that it is still not working correcting for me.
Dear Patrick,
Thank you for your interest in iTunes. We're very sorry you ran into problems installing our software. We'll do everything we can to help you get up and running.
First, please make sure you're using the latest version of iTunes before you access the iTunes Music Store. You can download the latest version of iTunes from our website.
http://www.apple.com/itunes/download/
Next, please try the steps outlined in our installation troubleshooting articles.
Mac: http://www.info.apple.com/kbnum/n301349
Windows: http://www.info.apple.com/kbnum/n93976
Windows XP with Service Pack 2 users should also read this important article about changes to Internet Explorer download behavior.
http://www.info.apple.com/kbnum/n93975
If you're still having trouble installing iTunes, please reply to this email with what you tried and what errors or behavior iTunes displayed.
Sincerely,
The iTunes Music Store Team
http://www.apple.com/support/itunes/ww/
I am running Itunes 6.0.1.3
I ran through the steps that you provided and found that I do still have this video in my queue. However, when I go to Advanced -> Check for Purchases....I still receive the error (See attached image). It acts like it wants to download, but then it stops.
I am currently running on a wireless Home Network using High Speed DSL from BellSouth. I have checked my firewall setting and it appears to be open to Itunes. (See attached image)
The OS is XP with SP 2.
Let me know if this is enough information.
Thanks for the quick response,
Patrick

I found an iphone 4 and i reset it everything went good. It told me to connect to itunes so i did (via windows 8) but it could not recognize it. Please help

I found an iphone 4 and i reset it everything went good. It told me to connect to itunes so i did (via windows 8) but it could not recognize it. Please help

I hope if I ever lose my phone that you find it snozdop and not ajackson15. Maybe ajackson15 will lose something of his/hers and then not get it back

Last night i have used my ipod and in morning i found it dead please help me its not responding at all i have tried evry thing

last night i have used my ipod and in morning i found it dead please help me its not responding at all i have tried evry thing

Charge the battery.
If necessary, restore the iPod > iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

I have solved the Problem

When I connect the iphone does not start automatically Itunes Please help me

when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I have

i've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works

Job error "layout not found"

hi
i've an error when i release my job , in job log, i've msg 017 "layout not found", i've try all the possibilities and i can't resolve this prob
can you help please
thanks a lot

The allowed format for the output is dependent on the printer device type. So X_65_132 can be fine with a Kyocera while it might have a problem with an HP printer or vica versa.
I recommend to discuss your problem with a basic consultant.
Please find OSS notes 25549 - Default formats for list printing
it explains what Print parameters are used in SM36 and how they will be determined in general.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Business graphics Customizing chart not found; contact administrator in MSS

Hi All,
We are getting error Business graphics Customizing chart not found; contact administrator in MSS-->Home Service only for one user but for remaining users it is working fine. Please find the below screenshot.
Please provide your inputs......
Regards,
Rahul.

go to t -code st01 and switch on the trace on top and tick the buttons in that and after that ....check for working manager user id first and do it with this user which is not working u can know any authorisations are missing assign them for this user ..ur issue will be solved

Ipod is not recognizing my passcode, please help!

This is the second time I have put a passcode lock on my ipod. I just put a passcode on my ipod about 10 minutes ago. I know I have not forgotten what it is because I wrote it down and it is the same password as last time. Not it says "Ipod diasbled" in red. I don't know what to do!
I am completly worried because I don't want to erase my ipod and I need it for tomorrow. Is this a glitch? I downloaded the new ipod update software last week, and maybe that did something. I am also not willing to spend money getting it undone, because I know this is not my doing. Please help.

I just went to the express lane help, and no help was found.
I realized that this question sounds weird, but if I don't get any help, I'm going to the apple store very unhappy. This is the 4th time something has gone wrong and it will be my 5th Apple Genius bar visit this year for the same ipod.

When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed

My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

VideoFormat.RLE is not working.. please help

Hi all,
I am creating AVI file from Bitmap that are compressed(As well as non-compressed) throught RLE Algorithm
Code makes .AVI file. But this file is not accurate..
Please help me..
I am attaching the code with it.
========================================================
package animation;
import java.io.*;
import java.awt.Color;
import java.awt.Dimension;
import javax.media.*;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.datasink.*;
import javax.media.format.VideoFormat;
import bmpCreation.BitmapImage;
public class AviCreator implements ControllerListener, DataSinkListener {
private Object waitSync = new Object();
private boolean stateTransitionOK = true;
private Object waitFileSync = new Object();
private boolean fileDone = false;
private boolean fileSuccess = true;
* A DataSource to read from a list of BITMAP Images
* turn that into a stream of JMF buffers.
* The DataSource is not seekable or positionable.
private class ImageDataSource extends PullBufferDataSource
private ImageSourceStream streams[];
ImageDataSource(int width, int height, int frameRate)
streams = new ImageSourceStream[1];
streams[0] = new ImageSourceStream(width, height, frameRate);
public void setLocator(MediaLocator source)
public MediaLocator getLocator()
return null;
* Content type is of RAW since we are sending buffers of video
* frames without a container format.
public String getContentType()
return ContentDescriptor.RAW;
public void connect()
public void disconnect()
public void start()
public void stop()
* Return the ImageSourceStreams.
public PullBufferStream[] getStreams()
return streams;
* We could have derived the duration from the number of
* frames and frame rate. But for the purpose of this program,
* it's not necessary.
public Time getDuration()
System.out.println("dur is " + streams[0].nextImage);
//return new Time(1000000000);
return DURATION_UNKNOWN;
public Object[] getControls()
return new Object[0];
public Object getControl(String type)
return null;
* The source stream to go along with ImageDataSource.
private class ImageSourceStream implements PullBufferStream
final int width, height;
final VideoFormat format;
// ColorPalette clrPal;
float frameRate;
long seqNo = 0;
int nextImage = 0; // index of the next image to be read.
boolean ended = false;
public ImageSourceStream(int width, int height, int frameRate)
this.width = width;
this.height = height;
// Bug fix from Forums (next line)
this.frameRate = (float) frameRate;
System.out.println("FrameRate = " + frameRate);
format = new javax.media.format.VideoFormat(VideoFormat.RLE,new Dimension(width, height),
                                                       Format.NOT_SPECIFIED,Format.byteArray,frameRate);
* We should never need to block assuming data are read from files.
public boolean willReadBlock()
return false;
* This is called from the Processor to read a frame worth
* of video data.
public void read(Buffer buf) throws IOException
// Check if we've finished all the frames.
if (nextImage >= 20)
// We are done. Set EndOfMedia.
System.err.println("Done reading all images.");
buf.setEOM(true);
buf.setOffset(0);
buf.setLength(0);
ended = true;
return;
//System.out.println("nextImage := " + nextImage);
nextImage++;
byte data[] = null;
byte data_copy[] = null;
// Check the input buffer type & size.
if (buf.getData() instanceof byte[])
data = (byte[]) buf.getData();
// Check to see the given buffer is big enough for the frame.
BitmapImage imgLoaded = new BitmapImage();
//Note that loadBitmapImage is my own function and works fine.
imgLoaded.loadBitmapImage("E:/Images/untitled.bmp");
int nDataLength = imgLoaded.getByteArray().length;
if (data == null || (data.length<nDataLength-118))
data           = new byte[ nDataLength - 118];
Here I am not much sure but I think Bitmap Header will be 118 Bytes.
     //Consider
data_copy      = new byte[nDataLength];
buf.setData(data);
// Bug fix from Forums ( next 3 lines).
long time = (long) (seqNo * (1000 / frameRate) * 1000000);
buf.setTimeStamp(time);
buf.setSequenceNumber(seqNo++);
("E:/ApplicationDemo/ApplicationDemo/Compressed.bmp");
data_copy = imgLoaded.getByteArray();
for(int nCount=118;nCount<nDataLength;nCount++)
     data[nCount-118] = data_copy[nCount];
buf.setOffset(0);
buf.setLength(nDataLength-118);
buf.setFormat(format);
buf.setFlags(buf.getFlags() | Buffer.FLAG_KEY_FRAME);
* Return the format of each video frame. That will be JPEG.
public Format getFormat()
return format;
public ContentDescriptor getContentDescriptor()
return new ContentDescriptor(ContentDescriptor.RAW);
public long getContentLength()
return 0;
public boolean endOfStream()
return ended;
public Object[] getControls()
return new Object[0];
public Object getControl(String type)
return null;
     @Override
     public void controllerUpdate(ControllerEvent evt) {
     if (evt instanceof ConfigureCompleteEvent
     || evt instanceof RealizeCompleteEvent
     || evt instanceof PrefetchCompleteEvent)
     synchronized (waitSync)
     stateTransitionOK = true;
     waitSync.notifyAll();
     else if (evt instanceof ResourceUnavailableEvent)
     synchronized (waitSync)
     stateTransitionOK = false;
     waitSync.notifyAll();
     else if (evt instanceof EndOfMediaEvent)
     evt.getSourceController().stop();
     evt.getSourceController().close();
     @Override
     public void dataSinkUpdate(DataSinkEvent evt) {
if (evt instanceof EndOfStreamEvent)
synchronized (waitFileSync)
fileDone = true;
waitFileSync.notifyAll();
else if (evt instanceof DataSinkErrorEvent)
synchronized (waitFileSync)
fileDone = true;
fileSuccess = false;
waitFileSync.notifyAll();
     public boolean createAvi(int width, int height, int frameRate, String outputFile){
// Generate the output media locators.
MediaLocator oml;
if ((oml = createMediaLocator(outputFile)) == null)
System.err.println("Cannot build media locator from: " + outputFile);
System.exit(0);
doIt(width, height, frameRate, oml);
          return true;
     * Create a media locator from the given string.
     private static MediaLocator createMediaLocator(String url) {
          MediaLocator ml;
//          if (url.indexOf(":") > 0 && (ml = new MediaLocator(url)) != null)
//               return ml;
//          if (url.startsWith(File.separator))
//               if ((ml = new MediaLocator("file:" + url)) != null)
//                    return ml;
//          else
               String file =
                    "file:" + /*System.getProperty("user.dir") + File.separator +*/ url;
               if ((ml = new MediaLocator(file)) != null)
                    return ml;
          return null;
private boolean doIt( int width, int height, int frameRate, MediaLocator outML) {
ImageDataSource ids = new ImageDataSource(width, height, frameRate);
Processor p;
try
System.err.println(
"- create processor for the image datasource ...");
p = Manager.createProcessor(ids);
catch (Exception e)
System.err.println(
"Yikes! Cannot create a processor from the data source.");
return false;
p.addControllerListener(this);
// Put the Processor into configured state so we can set
// some processing options on the processor.
p.configure();
if (!waitForState(p, Processor.Configured))
System.err.println("Failed to configure the processor.");
return false;
// Set the output content descriptor to QuickTime.
p.setContentDescriptor(
new ContentDescriptor(FileTypeDescriptor.MSVIDEO));
// Query for the processor for supported formats.
// Then set it on the processor.
TrackControl tcs[] = p.getTrackControls();
// for (int i = 0; i < tcs.length; i++) {
// Format format = tcs.getFormat();
// if (tcs[i].isEnabled() && format instanceof VideoFormat) {
//Dimension size = ((VideoFormat)format).getSize();
//float frameRate = ((VideoFormat)format).getFrameRate();
//int w = (size.width % 8 == 0 ? size.width :(int)(size.width / 8) * 8);
//int h = (size.height % 8 == 0 ? size.height :(int)(size.height / 8) * 8);
// VideoFormat jpegFormat = new VideoFormat(
// VideoFormat.JPEG_RTP, new Dimension(w, h), Format.NOT_SPECIFIED, Format.byteArray, frameRate);
/// messageLabel.setText("Status: Video transmitted as: " + jpegFormat.toString());
//int nLength = tcs.length;
// System.out.println(nLength);
Format f[] = tcs[0].getSupportedFormats();
if (f == null || f.length <= 0)
System.err.println(
"The mux does not support the input format: "
+ tcs[0].getFormat());
return false;
tcs[0].setFormat(f[0]);
System.err.println("Setting the track format to: " + f[0]);
// We are done with programming the processor. Let's just
// realize it.
p.realize();
if (!waitForState(p, Processor.Realized))
System.err.println("Failed to realize the processor.");
return false;
// Now, we'll need to create a DataSink.
DataSink dsink;
if ((dsink = createDataSink(p, outML)) == null)
System.err.println(
"Failed to create a DataSink for the given output MediaLocator: "
+ outML);
return false;
dsink.addDataSinkListener(this);
fileDone = false;
System.err.println("start processing...");
// OK, we can now start the actual transcoding.
try
p.start();
dsink.start();
catch (IOException e)
System.err.println("IO error during processing");
return false;
// Wait for EndOfStream event.
waitForFileDone();
// Cleanup.
try
dsink.close();
catch (Exception e)
p.removeControllerListener(this);
System.err.println("...done processing.");
return true;
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
private boolean waitForState(Processor p, int state)
synchronized (waitSync)
try
while (p.getState() < state && stateTransitionOK)
waitSync.wait();
catch (Exception e)
return stateTransitionOK;
* Create the DataSink.
private DataSink createDataSink(Processor p, MediaLocator outML)
DataSource ds;
if ((ds = p.getDataOutput()) == null)
System.err.println(
"Something is really wrong: the processor does not have an output DataSource");
return null;
DataSink dsink;
try
System.err.println("- create DataSink for: " + outML);
dsink = Manager.createDataSink(ds, outML);
dsink.open();
catch (Exception e)
System.err.println("Cannot create the DataSink: " + e);
return null;
return dsink;
* Block until file writing is done.
private boolean waitForFileDone()
synchronized (waitFileSync)
try
while (!fileDone)
waitFileSync.wait();
catch (Exception e)
return fileSuccess;

As I know getSupportedFormats doesn't support BMP files.

Custom layouts not found in manual, please help

Similar Messages

Maybe you are looking for