Custom loading image in WebDynpro iView

Hi All,
I have replaced the default loading image in the com.sap.portal.appintegrator PAR with a custom image.
As a result the new custom loading image is being shown in all iviews made fom that PAr e.g.BSP Iview, IAC iview etc.
But only the webdynpro iview is still not able to show that image,but is instead showing no image during loading.
Have checked every possibility.
Can anyone suggest what could be the problem??
Thank You.

Juhi Bhatnagar
Greetings!!!
May i know , what is the procedure need to be followed to replace the default Loading ICON with our custom image.
2. Does our custome image should be a image file (like jpg, png) or its like a command
Kindly share the procedure for this...
Appreciate your response in advance'
Thanks

Similar Messages

Custom loading image JSP dynpage

Hello,
Wa have created a jsp dynpage, and want to show a custom loading image. I other applications (appintegrator) we have succesfully changed the loading image by exporting the theme that we are currently using, change the loading_ani.gif image and re-importing the theme. This change has no effect on the loading image of the JSP dynpage, it is still the one supplied by SAP. I checked the url of this image and got the following https://host:port/htmlb/mimes/common/loading/loading_ani.gif, so I tried changing the loeding image that is stored in the htmlb par file, but there was no visible result when loading the application, or when loding the direct url of this image. Can anyone tell me where I can change the loading image of the JSP dynpages?
Kind Regards
Timon Van Soom

Juhi Bhatnagar
Greetings!!!
May i know , what is the procedure need to be followed to replace the default Loading ICON with our custom image.
2. Does our custome image should be a image file (like jpg, png) or its like a command
Kindly share the procedure for this...
Appreciate your response in advance'
Thanks

Missing Loading Message in webDynpro iview

Hi,
we have developed some WebDynpros. We have created some webdynpro iview to embed these webdnypros into a portal role. When I run the webdynpro without the portal or in the preview of the iview creator, the round role of the loading message is displayed well. But when I embed the iview into the portal role, the loading message is not vissible during the webdynpro picks up the data from backend system.
We are using SAP NW04s SPS10. The parameter of the ivew to show the loading message is still enabled.
Has anyone of you similiar experiences?
Thanks a lot.
Best Regards,

Hi Guys
Have u found the solution for the issue..
since i am currently facing the same problem
i am running on NW sp16
it would be highly appreciated if you can share across the solution
Thanks
Kumar T

Can I reuse existing KM layoutsets in webdynpro iView?

All,
I have a requirement where I need to display and navigate the KM repository( in my case a custom one) in a webdynpro iView. I already have built this custom repository, configured and can view/navigate the same from KM Content Page. Is there any way I can display the same repository in the same layout as I see from KM content page from a webdynpro iView? Can I reuse the existing layout set? Or would I need to custom code to recreate a tree structure?
Thanks,
Seema

Yes I have the default layout and I can successfully view the repository from KM Content page. But my requirement is to build a webdynpro iView and show a similar layout so that the user would not need to go to KM Content page to view the same. I need to integrate this webdynpro iView as a part of a bigger application we will be having.
Thanks,
Seema

Delay in loading of webdynpro iView

Hi all,
I have integrated a webdynpro view with portal (webdynpro iView). In webdynpro, the code fetches data from multiple backend systems and hence there is a slight delay in the loading of the iView (during which it seems as if the page is blank).
Is there a way I could show in the iView, that the page loading is in progress so that a user waits to see the page?
Thanks
Anagha

Hi,
its true that if its the only view of the component it'll take time to load as there is database related issues and for the first view of a application the page loding sign does'nt come.
whatever my understanding is if you can any how optimize you database related issues then it'll be helpful.
else it'll take time for the ivew to load.
Regards
Anirban

Windows 7 Professional PC hangs at "Loading files" when trying to boot with custom capture image on Windows Deployment Services.

I have created a custom capture image in WDS. Now when I try to boot my reference PC into this image the PC hangs at "Loading files". The reference PC is running Windows 7 and I am using Windows Server 2012 Standard on my server.
I have followed the instructions on how to create the custom capture image on the server to a fault. I PXE boot the PC and it shows the capture images after I hit F12. The problem is that it starts to boot and then hangs about 2/3 way through the progress
bar.
Any help would be appreciated.

Hi Derrick Logan,
We need know the detail phases your client hang, if it is irregular status, please collect the WDS log then post it. You can refer the following similar thread solution first.
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
Windows is loading files... Hangs on WDS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baacadc4-830d-43e1-ace8-3292e886958e/windows-is-loading-files-hangs-on-wds?forum=winserversetup
WDS hangs at "Windows is loading files..." on a LAM jhl91 laptop
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ebb6e0b-9f05-4fee-b3c0-129c34bb879d/wds-hangs-at-windows-is-loading-files-on-a-lam-jhl91-laptop?forum=winserversetup
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Document url link on webdynpro iview

Dear All
We have developed custom webdynpro ivew.
Assigned that ivew to page and can display in ESS submenu.
and one more km doc iview is there for document disply.
But requirement is when enduser access webdynpro ivew , in the same page there should be one link
If enduser wants to download that document he has to use that link. becuse that doc is relavant to that iview.
How can we do or organize this page.
Please help .
Thanks and regards
kumar.

Dear Raghu,
Thanks for your response.
How can I display link in webdynpro iview with the name of document.
Ex : Please click here to download the form as mentioned below.
file : link : formdownload.pdf.
If I click on this link it has to down load to enduser's local system.
Please suggest.
Regards
Kumar.

ABAP WebDynpro iView with window id problem

We have a custom ABAP webdynpro iView that is part of a dynamic navigation. When the iView loads the following warning message is displayed...
An error occured while starting the iView.
Application
https://<server>/sap/bc/webdynpro/sap/WebDynproComponent/;sap-ext-sid=J2IlkGCm4WYvxnfaQC8bVgY0oAX5DVVY3z_8GGDYcLow
will run with wrong client window ID!
Do not continue; please report this problem to your system administrator.
Once you click 'Ok' on the warning message....the webdynpro iView is displayed.
How do you not have the message display?
Thanks.

If the user is using link from favourites of browser, Ask him to delete it and manually enter the url and Try.
In my case, The user just deleted the saved link from Favorites and tried entering the url manually,
though it is weird it worked.
or else try these Notes 1450543, 1171930 .

How do i load images from a folder?

Hello everyone,
Please can someone help me as i am stuck.
I am trying to research loading images from a folder called /images/unknown (unknown is a customer number and is stored in a variable called customerNo).
I feel that i will need to load the images into an array then display them to the screen with a viewer.
Can anybody help me.
Thanks in advance

Welcome to the Sun forums.
irknappers wrote:
...Please can someone help me as i am stuck.You might want to be more exact in future, about what you are stuck on.
import javax.imageio.ImageIO;
import java.io.FileFilter;
import java.io.File;
import javax.swing.JFileChooser;
class LoadImages {
    public static void main(String[] args) {
        String[] suffixes = ImageIO.getReaderFileSuffixes();
        FileFilter fileFilter = new FileFilterType(suffixes);
        File directory = null;
        if (args.length==1) {
            directory = new File( args[0] );
        } else {
            JFileChooser fileChooser = new JFileChooser();
            fileChooser.setFileSelectionMode( JFileChooser.DIRECTORIES_ONLY );
            int result = fileChooser.showOpenDialog( null );
            if ( result == JFileChooser.APPROVE_OPTION ) {
                directory = fileChooser.getSelectedFile();
            } else {
                System.err.println("Must select a directory to proceed, exiting.");
        File[] images = directory.listFiles( fileFilter );
        for (File file : images) {
            System.out.println(file);
        System.out.println( "The rest is left an exercise for the reader. ;-)" );
class FileFilterType implements FileFilter {
    String[] types;
    FileFilterType(String[] types) {
        this.types = types;
    public boolean accept(File file) {
        for (String type : types) {
            if ( file.getName().toLowerCase().endsWith( type.toLowerCase() ) ) {
                return true;
        return false;
}

Custom Loading Screen in Applet

Hello,
in Flex/Flash the swf File contains 2 parts. First the loading Screen and second the programm.
So it loaded the loading Screen and than contains with the loading of the programm.
You can override the common Loading Screen and add some company specific varaint. The is very usefull, cause many company have a own CI.
So it is possible to change the Loading Screen in Java FX Applets?
Thanks for you Answer.
Regards,
Rookee

See [Joshua Marinacci's Blog: A Better Applet Experience, Part 1: a custom loading screen|http://weblogs.java.net/blog/joshy/archive/2008/08/a_better_applet.html] article.
But I fear we are currently limited to an image, fixed or animated (Gif). We cannot do something fancy like a lightweight FX program showing a more or less complex animation while the heavyweight applet loads in background (and provides progress information...).

Check printing - failed to load image

hello
i have an issue with printing checks. a long standing one.
my problems started when i put an image on a check. i wanted to add a signature image. once i did that, the popup that came up when i print a check did not come up. only for one user. i tried to solve the problem but it never got sorted out. so i created another username and removed the old one and it was working fine.
next i had an issue with the check not printing on blank pages for overruns only for one customer. to test why this was happening, i went to print preferences and and tried changing the maximum lines from 25 to 20. it popped a message saying 'failed to load image'. i ignored it. after that, i have now started to get the same problem of not getting the confirmation message when a check is printed.
why is this happening? is my only solution to delete this user and recreate one? any suggestions?

Hi,
For the image related issue:
+Since it is a User specific issue,we would require the difference in permissions and security settings for that particular user and for a user for which it is working.
+What is the format of the picture (.JPG, >GIF etc.)
+If this happens only for one super user then try to create a new super user and test.
Regards,
Abhinav Banerjee
SAP Business One Forums Team
Edited by: Abhinav Banerjee on Nov 22, 2008 3:20 AM

Referencing loaded images in APEX

Hi all:
Up until this point, I have used the same method of getting images to be recognized by an Apex
installation. That specifically has been through loading images into a physical directory on the
machine where APEX was installed. This was made available to me by the DBA that installed APEX.
This is Application Express 2.2.0.00.32 running on AIX Unix.
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
This arrangement worked. I was able to reference any image loaded to that directory using
"/i/[image].gif". "/i/" was set as my pseudo directory by default on Apex.
Over time, I developed an application that is now ready to deploy in like environments and I have
never had a problem with viewing graphics.
For the purposes of demoing to a specific customer, I was asked to deploy this to a different environment
temporarily, I was given the option of loading my application to a Windows XP environment running
Oracle XE and Application Express 2.1.0.00.39.
Since there was no physical directory that I could locate for images, it seemed to me that my only
option was to load my images using the wizard for loading image file components (which I understand
means using XDB)...
I was not been able to get this to work. I went back to my AIX Unix/Oracle 10g installation and attempted
to do the same (load images as a file component and reference them). To my surprise it didn't work there
either.
These are the steps I took in attempting this:
1.) Within my application definition, go to "Shared components"
2.) Under the Files section, I click on "images"
3.) Click on the button labeled "Create"
4.) The page "Create Image" appears. I click on the "Browse" button and I pick the image from my local file system.
5.) I leave the drop-down list as is (reading "No Application Associated")
6.) I click on the "Upload" button.
I then go back to my application under "Edit Attributes" and reference the file as /i/[file].gif
I find that the images do not show up. On IE, all I get is the standard red "X" indicating that
an image file failed to load.
I can't help thinking that I'm missing an obvious step. Let me know if there's any other info I should
provide.
Thanks

HI,
To reference images loaded through shared components use:
#WORKSPACE_IMAGES#filename.gif (when you set it to No Application Associated)
or
#APP_IMAGES#filename.gif (when you associate it with a specific application)
Graham

How can i make firefox not load images from certain websites permanantly

I am unable to block images on certain websites permanently. However, I can block images temporarily for a session through Option > Content > Load images automatically but whenever i clean the browser history or close down firefox the customized list that i entered disappear and i am back to square and again manually enter websites one by one and the same thing happens again.

You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
In case you are using "Clear history when Firefox closes":
*do not clear the "Site Preferences"
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

How to pass a run time value as a parameter to a webdynpro iview

Hi,
we have a webdynpro which we can call with passing a run time value in this form:
https://xxx.yyy.zzz/sap/bc/webdynpro/sap/zfkq_inv_1?WI_ID=000000004332&sap-client=700&sap-language=EN&sap-wd-sapgui=X
This link will be sent to many users but the WI_ID will change every time.
It works fine but now we want to implement this webdynpro in our portal. The user shall get a link like this
https://xxx.yyy.zzz/irj/portal/webdynpro-test?wi_id=000000004332. With this link he will navigate directly to the webdnypro (quicklink-function).
The problem is that i don't know how to transfer the parameter WI_ID in the url to the webdynpro.
It's no problem to fix the WI_ID in the application parameter properties but this is not what we want.
Is it possible to transfer the url parameter to the application parameters of the webdynpro iview ?
Thanks in advance.
Best Regards
Mirko Berscheidt

Hi Mirko,
The first thought I had is if your scenario makes sense at all. Because you might send out the links, but probably the iView will also be accessible via navigation, and in that case this additional parameter won't be there!?! (And if the iView is not accessible by navigation, then why going the way via the portal and not the direct way to the application like with your first link given?!).
Anyhow, I think this should be possible by using the AppIntegrator, see The customer exit of the Application Integrator
For an example about how to add individual values to users which you then can add to the URL see this discussion: App Integrator, and custom URL parameters using Customer Exits - this might be a possibility that each user can call the "same" iView but in fact the app integrator then would be fired with different URL parameters (per user).
Hope it helps
Detlev

Unable to install supporting objects(custom CSS/Images) through SQL

4.2.1
Hi there,
we have a Apex app which uses custom CSS/images loaded into shared objects CSS and image folders respectively. I followed the steps
http://nerd.net.au/29-apex-application-express/general-application/122-include-images-with-supporting-objects-on-apex-export-import
Now, this works fine when we manually import the application through application builder, it "prompts" if we want to install supporting objects, when yes is selected, everything gets installed.
MY problem is we have an automated patching process where the .sql application file gets installed but the supporting objects are not. So I tried bundling the supporting object as a separate .sql file but got an error
Testing options PL/SQL procedure successfully completed. declare * ERROR at line 1: ORA-20001: Package variable g_security_group_id must be set. ORA-06512: at "APEX_040200.WWV_FLOW_IMAGE_API", line 11 ORA-06512: at "APEX_040200.WWV_FLOW_IMAGE_API", line 31 ORA-06512: at
The supporting object is a button. Do I need to set the application id or security group id or something else?
begin
wwv_flow_api.g_varchar2_table := wwv_flow_api.empty_varchar2_table;
wwv_flow_api.g_varchar2_table(1) := '89504E470D0A1A0A0000000D494844520000009600000051080600000030EC5FEE000000097048597300000B1300000B1301009A9C1800000A4D6943435050686F746F73686F70204943432070726F66696C65000078DA9D53775893F7163EDFF7650F56';
wwv_flow_api.g_varchar2_table(2) := '42D8F0B1976C81002223AC08C81059A21092006184101240C585880A561415119C4855C482D50A489D88E2A028B867418A885A8B555C38EE1FDCA7B57D7AEFEDEDFBD7FBBCE79CE7FCCE79CF0F8011122691E6A26A003952853C3AD81F8F4F48C4C9BD80';
wwv_flow_api.g_varchar2_table(3) := '021548E0042010E6CBC26705C50000F00379787E74B03FFC01AF6F00020070D52E2412C7E1FF83BA50265700209100E02212E70B01905200C82E54C81400C81800B053B3640A009400006C797C422200AA0D00ECF4493E0500D8A993DC1700D8A21CA908';
wwv_flow_api.g_varchar2_table(4) := '008D0100992847240240BB00605581522C02C0C200A0AC40222E04C0AE018059B632470280BD0500768E58900F4060008099422CCC0020380200431E13CD03204C03A030D2BFE0A95F7085B8480100C0CB95CD974BD23314B895D01A77F2F0E0E221E2C2';
wwv_flow_api.g_varchar2_table(5) := '6CB142611729106609E4229C979B231348E7034CCE0C00001AF9D1C1FE383F90E7E6E4E1E666E76CEFF4C5A2FE6BF06F223E21F1DFFEBC8C020400104ECFEFDA5FE5E5D60370C701B075BF6BA95B00DA560068DFF95D33DB09A05A0AD07AF98B7938FC40';
wwv_flow_api.g_varchar2_table(6) := '1E9EA150C83C1D1C0A0B0BED2562A1BD30E38B3EFF33E16FE08B7EF6FC401EFEDB7AF000719A4099ADC0A383FD71616E76AE528EE7CB0442316EF7E723FEC7857FFD8E29D1E234B15C2C158AF15889B850224DC779B952914421C995E212E97F32F11F96';
wwv_flow_api.g_varchar2_table(7) := 'FD0993770D00AC864FC04EB607B5CB6CC07EEE01028B0E58D27600407EF32D8C1A0B91001067343279F7000093BFF98F402B0100CD97A4E30000BCE8185CA894174CC608000044A0812AB041070CC114ACC00E9CC11DBCC01702610644400C24C03C1042';
wwv_flow_api.g_varchar2_table(8) := '06E4801C0AA11896411954C03AD804B5B0031AA0119AE110B4C131380DE7E0125C81EB70170660189EC218BC86090441C8081361213A8811628ED822CE0817998E04226148349280A420E988145122C5C872A402A9426A915D4823F22D7214398D5C40FA';
wwv_flow_api.g_varchar2_table(147) := 'A514B7B6B6EA5AADA60B8582EAECEC54511471BD5EE7BEBE3EBF4E108FCA58FE9601580A68199FDAF12F8D1DDB5E3386221ADD8E3AF3CEC772A73505D60820C32BF0238E6DAF5D508DBAFFF2CFACE20C3E9A03E2789F3430B68D6DAF641BF33D8D6D63C0';
wwv_flow_api.g_varchar2_table(148) := '1ADBC68035B68D016B6C1BDBC68035B6BD46B6FF3B0074B1DD40306DC6CD0000000049454E44AE426082';
end;
declare
    l_name   varchar2(255);
begin
    l_name := 'logo.png';
wwv_flow_api.create_or_remove_file(
     p_name=> l_name,
     p_varchar2_table=> wwv_flow_api.g_varchar2_table,
     p_mimetype=> 'image/png',
     p_location=> 'WORKSPACE',
     p_nlang=> '0',
     p_mode=> 'CREATE_OR_REPLACE',
     p_type=> 'IMAGE');
end;
/

Thanks Fac586! I did follow the process on those lines and was able to successfully get the images, application installed. The CSS which just had
body {
     background-color:#000000;
}Was also applied. However, it for some reason does not work. Looks like the CSS is not getting loaded. When I delete the CSS and upload it again through the shared components->CSS folder, it works fine. Not sure what the solution is!
Oh and by the way, thanks a ton for helping everyone!
Cheers,
Ryan

Custom loading image in WebDynpro iView

Similar Messages

Maybe you are looking for