Custom Logging - Either via Console or a Tool...

Anyone know of a way to create custom logs in the Console? I am trying to audit specific events and would like to create a log that would show just those. Anyone know of a tool that logs events such as: failed attempts to read files, delete files, run programs, etc. I use ARD to run usage reports, but a specific tool or ability to log would be awesome. Thanks for any help!

we use kiwi log viewer (about $30). currently it allows you apply color filters based on words, grep searches, etc., but there's no way to filter out stuff you don't want to see or to only display search results. developer says it's on the roadmap. other options are splunk (no experience, full blown version is very expensive, there's a free version...kiwi is more reasonably priced).
don

Similar Messages

  • Server 2012 not accepting inputs either via console or RDP

    Hello Experts,
    I have a server 2012 standard running in a physical box with 3 virtual machines running in hyper-v session. For sometime now, i have been running into strange issues where it does not accept input. I tried via RDP, console; neither method worked. It still
    holds AD and file server role. It was all working good and driving me into issues for some time now.
    It does not accept inputs via keyboard or mouse either from console or RDP. All resources such as file share, virtual machine are accessible from network. I can logon to server via console or RDP for 3 to 5 min right after server has been hard restarted
    and again it stops accepting inputs.
    Can someone help me out work around this issue as i am new to server 2012 and not sure what goes in error.
    Thanks.

    Hi koneska,
    Did you install any software recently? Please try to unistall the new installed software and if you have AV soft disable the AV soft then try again.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can not administer Catalyst 2960 switch via console

    Hello,
    I want to configure my switch via console cable, the switch boots up normally, and there are no configurations present on the switch.  However, anything I type does not appear on the terminal client.  I used several terminal clients (TeraTerm, PuTTY, HyperTerminal), all latest versions as well as different PCs.  I even forced the switch to rommon mode, still, anything I type does not appear on the terminal client.
    Here's the output of TeraTerm:
    Boot Sector Filesystem (bs) installed, fsid: 2
    Base ethernet MAC Address: e8:40:40:06:f0:80
    Xmodem file system is available.
    The password-recovery mechanism is enabled.
    Initializing Flash...
    flashfs[0]: 542 files, 19 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32514048
    flashfs[0]: Bytes used: 11565056
    flashfs[0]: Bytes available: 20948992
    flashfs[0]: flashfs fsck took 11 seconds.
    ...done Initializing Flash.
    done.
    Loading "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
    File "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin" uncompressed and installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 28-Sep-10 13:44 by prod_rel_team
    Image text-base: 0x00003000, data-base: 0x01400000
    Initializing flashfs...
    fsck: Disable shadow buffering due to heap fragmentation.
    flashfs[1]: 542 files, 19 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 32514048
    flashfs[1]: Bytes used: 11565056
    flashfs[1]: Bytes available: 20948992
    flashfs[1]: flashfs fsck took 2 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    Checking for Bootloader upgrade.. not needed
    POST: CPU MIC register Tests : Begin
    POST: CPU MIC register Tests : End, Status Passed
    POST: PortASIC Memory Tests : Begin
    POST: PortASIC Memory Tests : End, Status Passed
    POST: CPU MIC interface Loopback Tests : Begin
    POST: CPU MIC interface Loopback Tests : End, Status Passed
    POST: PortASIC RingLoopback Tests : Begin
    POST: PortASIC RingLoopback Tests : End, Status Passed
    POST: PortASIC CAM Subsystem Tests : Begin
    POST: PortASIC CAM Subsystem Tests : End, Status Passed
    POST: PortASIC Port Loopback Tests : Begin
    POST: PortASIC Port Loopback Tests : End, Status Passed
    Waiting for Port download...Complete
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco WS-C2960-24TT-L (PowerPC405) processor (revision J0) with 65536K bytes of memory.
    Processor board ID FOC1510X4ZQ
    Last reset from power-on
    1 Virtual Ethernet interface
    24 FastEthernet interfaces
    2 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    64K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : E8:40:40:06:F0:80
    Motherboard assembly number     : 73-12600-05
    Power supply part number        : 341-0097-03
    Motherboard serial number       : FOC15094MZG
    Power supply serial number      : DCA150583WQ
    Model revision number           : J0
    Motherboard revision number     : A0
    Model number                    : WS-C2960-24TT-L
    System serial number            : FOC1510X4ZQ
    Top Assembly Part Number        : 800-32797-01
    Top Assembly Revision Number    : F0
    Version ID                      : V09
    CLEI Code Number                : COM3L00BRE
    Hardware Board Revision Number  : 0x0A
    Switch Ports Model              SW Version            SW Image
    *    1 26    WS-C2960-24TT-L    12.2(50)SE5           C2960-LANBASEK9-M
    Press RETURN to get started!
    *Mar  1 00:00:31.381: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
    *Mar  1 00:00:32.556: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
    *Mar  1 00:00:35.802: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to down
    *Mar  1 00:00:35.861: %SYS-5-CONFIG_I: Configured from memory by console
    *Mar  1 00:00:36.012: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 28-Sep-10 13:44 by prod_rel_team
    *Mar  1 00:00:36.037: %SSH-5-ENABLED: SSH 1.99 has been enabled
    *Mar  1 00:00:37.060: %LINK-5-CHANGED: Interface FastEthernet0/6, changed state to administratively down
    *Mar  1 00:00:37.094: %LINK-5-CHANGED: Interface FastEthernet0/7, changed state to administratively down
    *Mar  1 00:00:37.127: %LINK-5-CHANGED: Interface FastEthernet0/8, changed state to administratively down
    *Mar  1 00:00:37.161: %LINK-5-CHANGED: Interface FastEthernet0/9, changed state to administratively down
    *Mar  1 00:00:37.195: %LINK-5-CHANGED: Interface FastEthernet0/10, changed state to administratively down
    *Mar  1 00:00:37.228: %LINK-5-CHANGED: Interface FastEthernet0/11, changed state to administratively down
    *Mar  1 00:00:37.262: %LINK-5-CHANGED: Interface FastEthernet0/12, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/13, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/14, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/15, changed state to administratively down
    *Mar  1 00:00:37.404: %LINK-5-CHANGED: Interface FastEthernet0/16, changed state to administratively down
    *Mar  1 00:00:37.446: %LINK-5-CHANGED: Interface FastEthernet0/17, changed state to administratively down
    *Mar  1 00:00:37.488: %LINK-5-CHANGED: Interface FastEthernet0/18, changed state to administratively down
    *Mar  1 00:00:37.497: %LINK-5-CHANGED: Interface FastEthernet0/19, changed state to administratively down
    *Mar  1 00:00:37.539: %LINK-5-CHANGED: Interface FastEthernet0/20, changed state to administratively down
    *Mar  1 00:00:37.572: %LINK-5-CHANGED: Interface FastEthernet0/21, changed state to administratively down
    *Mar  1 00:00:37.606: %LINK-5-CHANGED: Interface FastEthernet0/22, changed state to administratively down
    *Mar  1 00:00:37.639: %LINK-5-CHANGED: Interface FastEthernet0/23, changed state to administratively down
    *Mar  1 00:00:37.673: %LINK-5-CHANGED: Interface FastEthernet0/24, changed state to administratively down
    *Mar  1 00:00:37.690: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
    *Mar  1 00:00:37.715: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
    After the last line, I can not type any command at all.  I encountered this on three 2960 switches that we have here in our laboratory.  Can anybody help me on how I can get access to the switch via console?
    Thanks in advance.

    Have You Check your console Cable.
    also
    If u are using USB to Serial check driver are properly installed.
    else
    See Helpful Cisco Documentation
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml
    Do Rate Helpful Posts

  • Getting error while creating Customer Invoice Request via Web Service

    Hello,
    I am trying to create customer invoice request via web service.
    But I am getting the error message "No scheme configuration found for scheme '&CIRHP&' " continuously.
    It is working fine in reference tenant. But using the same payload its giving error in another tenant.
    Can you please tell me what is the root cause for this error?
    I have included the payload used in the prototype tenant(Payload.txt) and screen shot of the error.
    Thanks and Regards,
    Sriram

    Hi,
    Check the WSDL file is wellformed or not..You can test it using tools like XML Spy.
    Might be the attribute tag is missing something..If WSDL file is correct then, create proxy by selecting the WSDL file from local machine..
    Regards,
    Sunitha

  • Unable to view client logs from sccm console

    Hi
    unable to connect to ccm and unable to view client logs from console. Console installed is on another server that is not site server
    Regards Sushain KApoor

    Hi
    SCCM right click tools adds multiple ‘Client Tools’ entries
    are comming when i right click on the clients. when i check for logs it shows client logs written only. More over when i try to connect to C$ i am able to connect to from console right click tools but when i go for connecting ccm folder it says no directory
    found admin$\system32\ccm, but my machine is of 64 bit OS hence it should go to syswow64. any ideas how to resolve the same.
    i am planning to go with
    http://blog.danovich.com.au/2010/11/16/sccm-right-click-tools-adds-multiple-client-tools-entries/ this option
    Regards Sushain KApoor

  • Display link if wholesaler logged in or alternate link if customer logged in?

    Hi,
    I have a website that sells products to customers and wholesalers.
    I have setup a separate secure area for both the customer and the distributor. (to view past orders/specials etc)
    In top right of my site - they can click a "Login/Register" button that takes then to the login / registration page.
    Here they login as a customer (or if a wholesaler they are asked to go to the wholesaler Login Page).
    Once logged in the top right "Login/Register' button changes to a "Hello Name" and an "Account Overview" link.
    The problem is I have to hard code the "Account Overview" link so it can only link to either the customer or wholesaler secure area overview page.
    Is there anyway I can set it to recognize if a Wholesaler or a Customer logs in and display the appropriate link?
    Any help would be appreciated.

    anonymous - See Application Link
    Scott

  • Newly authorised users unable to view host info via console.

    I've recently added a number of users to the /var/opt/SUNWsymon/cfg/esusers file on the SunMC server and
    ensured that they have groups acess to esadm and esdomadm. Unfortunately, when they double click on a
    server icon in the SunMC console, the window opens but remains blank. After 20 seconds or so, an error
    messages appears in the lower left hand corner stating "Unable to load console info".
    If I log on to the affected host and look in the /var/opt/SUNWsymon/cfg directory, I find two files containing
    my login ID..
    agent-usmaclgrps-d.dat
    agent-usmusertbl-d.dat
    No entries exist for the affected users. Yet if I run '/opt/SUNWsymon/sbin/es-setup -F', the two config files are updated with details of TWO of the affected users. The other user may not be present due to the fact they have
    yet to log on via the console and try to retrieve the relevant info.
    I have about 40 known servers that require attention, the chances are there are a significant number that have yet
    to be diagnosed with the same issue. Any advice on a quick fix would be greatly appreciated. The thought
    of having to run es-setup on each server is not something I would particularly relish...
    Regards,
    Trev.

    What does the packet-tracer say, what does the IPsec associations say (packets encrypted/decrypted)?
    This might be faster that going through your hundreds of lines of config.

  • Restart via Console

    Hi,
    does anyone know if it will be possible to restart WL60 from the web
    console tool? I recognized that for lot's of configuration settings to
    take affect a restart is necessary. With restart via web the
    administration through a firewall without ssh, pcanywhere or vpn would
    be much more conveniant.
    Daniel

    Daniel Hoppe <[email protected]> wrote in message
    news:[email protected]..
    Is this consideration a technical matter or a question of best practices
    for administration processes?
    DanielIts just a matter of time/resources/priorities relative to other
    features/functionality being delivered.
    >
    -----Original Message-----
    From: Sanjeev Chopra [mailto:[email protected]]
    Posted At: Monday, November 13, 2000 6:03 PM
    Posted To: management
    Conversation: Restart via Console
    Subject: Re: Restart via Console
    Daniel,
    Starting servers via the admin console is not supported in WLS 6.0
    It is being considered for a future release.
    Sanjeev Chopra.
    Daniel Hoppe <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    does anyone know if it will be possible to restart WL60 from the web
    console tool? I recognized that for lot's of configuration settings to
    take affect a restart is necessary. With restart via web the
    administration through a firewall without ssh, pcanywhere or vpn would
    be much more conveniant.
    Daniel

  • HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • My ipod tells me my apple id password is wrong even though I just changed the password. I can log on via my desktop, but the ipod continues to tell me that the password is incorrect, so I can't update any apps. Help!

    my ipod tells me my apple id password is wrong even though I just changed the password. I can log on via my desktop, but the ipod continues to tell me that the password is incorrect, so I can't update any apps. when I continue to to try to enter the correct password in it finally freezes the account, and I have to go online via my desktop to fix that problem. I have two apple id's because when my ipod crashed I had to reset it completely. I have never had any problems with this before, and it has been a year since I got my second id, which is linked to the ipod. My first id is used for the cloud on the same device. My wife suggested I reset documentson the cloud for the second id, however, when I try to log on the cloud with my current id, it tells me I have to set up the cloud on that device, but it is already done, but with the old id.
    confusing I know. I have been on the 'change your password merry-go-round' all day, and I'm getting dizzy! Help!

    Then contact iTunes:
    Apple - Support - iTunes - Contact Us

  • Creative Cloud Teams member cannot log in via Desktop app

    Weird problem I have. Our company have 9 seat teams account, and one of our users cannot log in via the desktop app and use apps. Have worked just fine for the last year until today.
    He has the old Application Manager installed as well as he had upgraded from older apps, and we are renewing our yearly subscription these days. Could any of that be the problem. Odd thing is, he is the only team member that has this problem.
    He can log in to his account on the web just fine.

    Creative Cloud Help | Manage your Creative Cloud for teams membership may help

  • I am not able to see Diagnostics logs in Admin Console

    Hi,
    I did some configuration changes in JDBC level and now i want to see diagnostics logs in admin console . But when i moved to Diagnostics--->log files---->server logs----> (selected managed server ) -->click view
    it doesn't display anything.
    Please tell me how to view the logs in admin console....

    Hi,
    First of all you have to do some tasks in order to get this data.
    1. Enter to WLS Administration Console.
    2. On the left panel go to Diagnostics > Diagnostic Images
    3. Select one of your servers using the radio button.
    4. Clic on Capture Image
    It will generate a zip file with a snapshot, or dump, of a server's state and configuration data.
    Best regards,
    Raúl

  • Custom log of rejects in BPC data manager package

    dear All
    we have custom package which loads records from flat file.
    The package is using a stored procedure for all calculations and log errors..
    The error codes are logged for duplicates, invalid member IDs..
    When we tested for small number of records, the log used to display in package view status.
    But if there are huge number of reccords we were unable to display log in the pacakge status. Is there any limitation?
    the error log file ranging from 8Mb to 25MB.
    Please advise.
    BPC 7.5 MS version.
    regards
    Prasad

    hi Roberto
    thanks for your reply.
    yes i am trying to display the log file of private publications only. it consists of rejects with custom logs.
    this is requirement from client, they wantrd to see in package view status itself.. so is why we got stuck
    during testing it was able to display but during uat there were huge rejects where it wasnot able display anthing.
    is there any sap  note so that I can share to client,n or specifications of sap?
    any workaround please advise
    regards
    Prasad

  • Want to Generate custom logs with Log4J within Java Embedding activity

    Hi Gurus,
    i want to Generate custom logs with Log4J within Java Embedding activity. For that i have performed some steps, but the log file has not been created.
    ServerSide Configuration:
    *===============*
    1. I have copied the log4j-1.2.15.jar file to the "oracle.soa.ext_11.1.1" location and recreate the oracle.soa.ext.jar file using an-script, which appends the log4j.jar file to the classpath.( That was created successfully)
    2. Specify a File location in log4j.xml for creating the log file. (e.g. (<middleware_home>/config/customLog.log)
    3. Then create a folder and add log4j.xml and log4j.dtd file under the folder.
    4. Modify the startManagedWeblogicServer by adding JAVA_OPTIONS="-Dlog4j.configuration=<middleware_home>/config/log4j.debug.xml”
    5. Then restart the SOA server.
    log4j.xml :
    I have used fileAppender.
    DevelopmentSide Configuration:
    *===================*
    1. Create synchronous BPEL process and Add "JAVA Embedding Activity" inbetween receiveInput and replyOutput activity.
    2.Import the log4j-1.2.15.jar to the project libs
    3.In the BPEL source code, import the Logger class.
    4.Insert the code in the JAVA Embedding Activity
    Logger logger = Logger.getLogger("CustomLog");
    logger.info("CustomeLog " + getTitle());
    Compile and deploy the project into the SOA_server and test it. Test status is completed but log is not created in the mentioned location.
    Ref: http://blog.andrade.inf.br/search/label/Log4j
    Is there any other way to achieve this requirement. Please suggest.
    Thanks in Advance,
    Sharmistha

    You can try this.
    http://veejai24.blogspot.co.uk/2008/04/simple-way-to-implement-log4j-in-your.html
    Thanks,
    Vijay

  • Chromium passwords missing ONLY when logging in via lxdm

    Crazy I know but it's true.  If I log in via lxdm and from with in chromium: preferences>personal stuff>manage saved passwords both "saved passwords" and "never saved" are blank.  If I switch /etc/inittab to use lightdm, telinit 3 && telinit 5 and log in, all passwords are there and populated.  WTF?

    I have the same problem with chrome. Has anyone found a solution for this? Adding
    auth optional pam_gnome_keyring.so
    session optional pam_gnome_keyring.so auto_start
    to /etc/pam.d/lxdm didn't helped for me.

Maybe you are looking for