Custom login module Authentication works but Authorization Does not work

Hi:
I am using custom login module and switched on the ADF authentication using adf-config.xml file. My custom authentication works i.e. it returns true but when it finally tries to display the page 401 Unauthorized message is shown. I am using JDev 10.1.3.2.
Is there any other settings I need to perform. Could you please let me know.
Thanks

I have the same issue, please refer to this thread.
Re: ADF Security Authorization

Similar Messages

TS3367 facetime used to work but now does not work on any of my devices

I have been in regular contact until about 4 days ago using facetime on my iphone 5 imac 10.7.5. ipad 2 now none of these devices work from incoming calls from Philipinnes. Take note the caller had latest macbook pro 13 inch and is able to call Guam on fatetime with success. What is happening why is incoming calls alway failing. This has been 4 days running and is not good enough. Okay I havent got the latest updates but why in the late few days whould this effect anything. I mean 3 devices and none of them work. This is most frustrating and annoying. I have intead used skype which does work but at night time the camera is not as clear. Tanke note also earlier in the year I received calls from Vietnam and although I did have dropouts was always able to connect only these last four days have had no success. Also I have not been able to call out. The wireless has full bar and am near the modem that is not an issue. Unless there has been a recent change why is htis not working all of a sudden.

THere seems to be a FaceTime issue and some users who have been in contact with Apple support claim that Apple is working on this.
I have read many posts on the issue and have seen that there are many reporting that when they have updated their various devices to the latest software, the issue has been resolved.
You can wait for Apple to resolve the issue OR you can update everything to the latest software and see if this solves your issues.

How do I fix my volume when ringing it works but it does not work for games and movies

How do I fix my phone volume it works when the phone rings but for all the other things the volume does mot work for example games and other sounds don't work.

Hm, it sould like liquid damage to me.

SSH to PIX works but HTTP does not work

Hi
I can SSH to pix but not HTTP to pix although http is enabled.I am using ACS/RSA for user authentication.I see SSH is allowed in ACS but I do not know How to configure ACS so that I can HTTP to pIX ?I am trying to connect to pIX with Cisco Network Assistant ,it will connect but asks for username and password and when I put in username and password it comes back asking the same

The WebUI can not use RSA for authentication. As a test try setting it to local.

Microphone works but dictation does not work

My dictation software was working fine then suddnely not so much. I have ensured it has been enabled, I have selected automatic detection as the default, I have choesen the internal microphone as the default, I have chosen the external microphone as the default, I have even deleted the
file://localhost/Users/williams/Library/Preferences/com.apple.assistant.plist file and rebooted, tested my internal and external microphones through the system preferences dictation setup (both register as working while in dictation preferences as indicated by the microphone symbol responding to sound), I've ensured the language was set to english (US) and closed all other programs.
Once the dication command is selected the microphone pops up and viola no response as if the microphone is no longer working!!! I am sooo much more productive with the speech to text function and really need it back. Anyone with any new/additional suggestions will be most welcome and I appreciate the help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Tax % - FB70 works but VF01 does not work????

Hi all
I manually entered a tax jurisdiction into the standard Costing procedure 'TAXUSJ' as CA102000. I went to FTXP & entered my output tax code as O1, picked the state of California's juris. CA1002000 & entered 7.25% in the A/R Sales tax 2 against account key MW2 (I dont know why it suppressed account key MW1). Checked if the GL accounts were defined & they were defined as 216010.
Then I went to FB70 (customer invoice) & I picked that jurisdiction & it calculated the tax perfect. But when I asked the SD consultant to do a sales order, goods issue & delivery & then when he created the accounting document it did not generate any tax entry to that GL account. What could be the possible reason. The GL account for that invoice was 400000 & it has a * for the 'tax type' in the FS00 master data screen. So I dont know what could be the reason.
Again it is a manual entry for the tax jurisdiction. I could see that the jurisdiction on the customer master was picked up as CA1002000.
Can somebody help please...
Thanks for all your time....

Entry for the condition table in VK19 for the satet of California was missing.
Thanks all for your time...

DM - "Export from Fact Table" works but "Export" does not work properly

Hi,
I'm using BPC7M.
I found it strange that Export cannot dump data to a flat file though I'm pretty sure my selection of dimension members contain data. The existing of data was further confirmed by running Export from Fact Table successfully, where I chose the same set of dimension members. Below are the log files.
Export log file FAIL
u603Bu6B65u9AA4 2
1. Dump Data:     Failed in 32 sec.
[u9009u62E9]
FILE=\Shenergy\WJ2\DataManager\DataFiles\WJ2_SunnyTest.txt
TRANSFORMATION=\SHENERGY\WJ2\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\EXPORT.XLS
MEASURENAME=PERIODIC
(u6210u5458u9009u62E9)
Category:
Time:
WED_Entity:
B_Account:
DataSrc: INPUT
[u6D88u606F]
There is no data in the selected region; select a region that has data._2_True
Export from Fact Table log file   SUCCESS
u603Bu6B65u9AA4 2
1. Dump Data:          completed in 1 sec.
2. Convert Data:       completed in 0 sec.
[u9009u62E9]
FILE=\Shenergy\WJ2\DataManager\DataFiles\\WJ2SunnyTest.txt
TRANSFORMATION=\SHENERGY\WJ2\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\EXPORT.XLS
(u6210u5458u9009u62E9)
Category:
Time:
WED_Entity:
B_Account:
DataSrc: INPUT
[u6D88u606F]
Record Count: 104
Accept Count: 104
Reject Count: 0
Skip Count   :0
I tried Export in another application and it worked properly. Maybe there is something wrong with the application but I don't know how I can fix this.
Thanks!
Sunny

Hi Sorin,
In order to make sure the sum is not equal to 0, I ran the "Clear" package and full optimize the application. Afterwards, I deliberately sent only 1 record. I ran the "Export from Fact Table" and I have the following contents in my output flat file.
B_ACCOUNT,TIME,WED_ENTITY,DATASRC,CATEGORY,SIGNEDDATA
KPI0001,2009.INP,DEP_INPUT,INPUT,ACTUAL,-500.0000000
This confirms that the sum is not 0. Then, I ran "Export" package. Yet again, I encountered the same error.
There is no data in the selected region; select a region that has data._2_True
Best Regards,
Sunny

On my admin user indesign works but it does not work on another user

i am using os 10.7.5
and i got my applications installed
they work fine on admin user
but when i create a common user for every1 to use
my applications ask me to re-instal
waiting for reply
mahendra
dubai

Did you put the software in /Applications, or did you choose a different location?

I adjusted the login module, but it does not work.

I Adjust the Login Module Stacks according to the
http://help.sap.com/saphelp_nw04/helpdata/en/aa/bf503e1dac5b46e10000000a114084/content.htm
I adjusted the Hello Application provided by the SAP J2EE Server, I remove all the login modules, I hope there is no login page displaying when I access to the Hello page again. But it does not work. The login page always appears.
Was I wrong to understand it?
Any reply is appreciated.

1. I finished configuration for Login module.
   2. And the document say, the last step is to make
sure the login modules take effort when the application
is accessed, using the Application Tracing Servie to
restart the affected application.
   But, I have not found the Application Tracing Service
to restart the affected application.
   I think it is why it does not work.
   Hope your your any recommendations and Points must be
rewarded.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

TS3988 Each time I log into iCloud, I check, Keep me logged in, but this does not work. I have to reenter user name etc each time I try to go back to my iCloud account.

Each time I log into iCloud, I check, Keep me logged in, but this does not work. I have to reenter user name and password etc each time I try to go back to my iCloud account.

Hi,
In Keychain Access app in the Menu for the App is Keychain First Aid.
If you open this is the tick box for Synchronising the Login password with the so called Login Keychain ticked ?
9:49 pm Monday; March 16, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

Custom login module Authentication works but Authorization Does not work

Similar Messages

Maybe you are looking for