Custom metadata sets for Productions?

I've added a new metadata set that suits our needs, but it is not showing up as an option when creating a new production - is there some option that I missed in order to allow this, or is there a completely different process involved with creating a new metadata set for production folders? Can someone tell me what I missed or walk me through how to do that? Thank you!

Did you make sure to assign the new MD Set to Productions and not Media? If so there must be something else wrong with the way you set it up. Make sure the ID says:
paproductionyourmetadatasetname
If it does not ID this way it will not show in new Productions.

Similar Messages

Custom "Metadata Sets"

Version 1.0 has 5 pre-defined subsets of the metadata display in library in Addition to ALL.
There are a LOT of fields that I use only very rarely. And none of the pre-defined subsets include all the fields I use for nearly every image. SO, I would really like to see the ability to create 3 or 4 customized Metadata Sets that would facilitate entering/viewing the fields I want and not be cluttered with the ones I usually ignore.
Thanks,
Robert

Thanks for the response David.
I looked over the regex.info web page and will work with the program soon as I get a chance. Not as convenient as a function built into the program, but as good as we can get until Adobe incorporates something similar into LR.
Thank You very much for providing this.
Robert

BC Sets for Product Compliance

Hi guys,
We are looking at option of copying customization table values using BC sets for Product Compliance.
I don't think we can use BC sets for Incident Management and Risk Assessment part.
However I know you can use BC sets for product compliance part so my question is how do we use
BC sets? Any documentation/link or suggestions on what are the steps?

Dear D M
we are not using BC sets. I have only come in touch with them using EHS classic and not EHSM.
Check may be this SAP online help to get some ideas:
Business Configuration Sets (BC-CUS) - SAP Library
C.B.
PS: you can execute in any case what is known as an "cross transport"; This option should be well known (I assume) as it it one "classical" solution to get one configuraiton from one SAP system to a different one (pay attention: Release status should be the same; but this is true as well for BC sets).
this is nbot the same as using a BC set !

Credit Limit set for Product wise

HI ,
We have a requirement of Customer credit limit has to set at Product ( Material) level , can it be achieved through FSCM Credit Management .
Say Customer A has Deal with Product X and Product Y , Product X credit Limit : 100000 , B = 200000 overall 300000 for Customer A.
Regards,
klreddy

Hi ,
As I discribed in example , Sales is to Single Customer , but sales contain multiple products . As a Business Credit Policy , we required to set up credit limit for each product wise to the same customer .
Any further information , if you feel , please revert.
Regards,
Klreddy

Custom metadata field for GET_FILE in Content Tracker

Hi ppl,
I've trying to use content tracker to audit some actions including GET_FILE. The problem is that I need to save a custom metadata field that is not in the localdata resultset.
I know that I can save all the custom metadata fields in a column such as EXTFIELD_2 but it makes no sense if I need only one field among a hundred.
Is there any other way?
Appreciate any thoughts.
Cya

Hello,
Can you please share the steps through which I can map my custom metadata fields with the special Content Tracker fields like extField_1, extField_2 etc.
Thanks,
MAK

Customer Subcontract Stock for Production Order

Dear All,
We have create a Subcontract Sales Order from VA01. Now after MRP run, we have a Planned Order which in turn will be converted into a Production Order.
The Finished Product contains a BOM, the Production Order in turn contains a list of the Raw Material Components. The scenario is as below.
Finished Product A
Raw Material Component B1
Raw Material Component B2 <- Material from Customer Subcontract (Booked into SAP system using Mvt 501 - E)
Raw Material Component B3
Raw Material Component B4
In case we want to issue material to this Production Order, system is requiring me to issue the Raw Material Components from Sales Order Stock (Special Stock E) for all components B1, B2, B3 and B4.
But for my case only B2 is the Material from Customer Subcontract and all other Raw Materials B1, B3 and B4 are from inhouse.
I would like to ask is there any method to modify the Production Order so that B2 is issue from Sales Order Stock where as for B1, B3 and B4 are from the normal unrestricted stock.
I have checked in the Plan Order but it only allows me to change the stock type for the whole Production Order. Does anyone knows how to set only particular components in the Production Order to be issued from Sales Order Stock?
Thanks.

"Dependent requirements ind. for individual and coll. reqmts" (MARC-SBDKZ) on MRP4 of material master is used to control whether the components are managed in the special stock segment or not in MTO environment.
(Discussed many times on the forum.)

Delivery Date not Set for Production Orders

Hi,
I am trying to settle a MTS (make to stock) production order that is both CNF and DLV. When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set. I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains. When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set. I can't see where this is looking for the delivery date. Has anyone come across this issue and if so, how would I go about correcting this?
Thanks!

Sorry, posted in the wrong forum.

Decimal setting for product

Hi All,
Here for a product price for B2B is comming as 11,435(3 decimals) when ordering in order.jsp. Let me know how to fix this issue.
Note: We are not using IPC.
Regards,
Devender V

Hello Mark,
Sorry for not providing complete information.
This apprears while order is created.
But here price is coming in 3 Decimals(eg: 11,456), And the requirement is make it to 2 decimals.
My question would be where to correct this :
1) We are not using IPC, So from where this price is determined. Can we make change at back-end.
2) Where we can make front end changes.
Regards,
Devender V
Edited by: devender on Jul 12, 2010 10:03 AM

Removing default Metadata set

I am creating very specific metadata fields, groups and sets for one of our clients. however, i cannot seem to delete the custom Metadata Sets, for example: 'Show' has no relevance to us, but I can create new sets fine. Please if anyone knows how to do this or know a good workaround, any help will be much appreciated.
thanks

Sure, FCSvr is highly customisable.
Having the default metadata there gives one options, you don't have to use it all. Only the admin should ever see it if setup correctly. You see it, ignore it and move on.
Or, I may be misunderstanding your question. Are the end users seeing a field you don't want them to?
I know you can delete certain fields - but backup your database first.
Even deleting a seemingly useless (to some deployments) metadata group such as Documents, can totally wreck the database.
You can install a custom metadata set which will require a lot of work to build from scratch. If you do want to go that route it will take many man hours to construct database fields, lookups, sets, etc.
Good luck.

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

Custom Metadata Observer

Sorry for this question but I'm new on lua and the LR SDK
I have the following problem:
I have a custom metadata set with two fields, eg:
1: Name, Type string
2: URL, Type url, readOnly: true
In the metadata tagset "URL" is hidden because it is empty and only "Name" is shown.
After an user has entered text in the field "Name" and pressed enter, an url should be generated and shown in the "URL"-field. The entered value from "Name" is a fix part of the "URL".
Is this possible without using a dialogbox?
Thank you for your help.

Hi,
IjonTichyTS wrote: I have the following problem:
I have a custom metadata set with two fields, eg:
1: Name, Type string
2: URL, Type url, readOnly: true
In the metadata tagset "URL" is hidden because it is empty and only "Name" is shown.
If you want the URL value to be permanently visible even when empty, you will need to modify its entry in the metadata tagset as follows:
-- Note: GPS would otherwise be hidden when no value exists
{'com.adobe.GPS', alwaysVisible = true, label = 'alwaysVisible'},
The default for alwaysVisible is false which is why the URL field will normally be hidden.
IjonTichyTS wrote:
After an user has entered text in the field "Name" and pressed enter, an url should be generated and shown in the "URL"-field. The entered value from "Name" is a fix part of the "URL".Is this possible without using a dialogbox?
I suspect you are looking for a way to attach an observer or have an action fire when you change the value of a field in a metadata tagset. Currently Adobe has not exposed that functionality in their SDK so you will need to work around this using approaches such as John mentions above.
Matt

In A3, How Do I Apply One Of My (many) Custom Metadata Views To The Viewer?

In A3, it appears that both the Viewer and Browser are limited to just 2 views: Basic and Expanded.
In A2, I had many custom metadata views that I could easily change via the Metadata-pane (now gone) in Prefs. depending on the type of workflow, customer needs, etc.
Now, if I'm limited to just 2, I'll have to go in and manually change the composition of A3's 2 views for each workflow. If this is the case, I see it as a big step backwards. This is the type of limitation that iPhoto often has, and flexibility is what I expect from a Pro-App.
I spent a great deal of time developing custom metadata views for various workflows so that I could align the various displays in Aperture to each workflow. What do I do now?

Just stumbled over this thread:
Yes, its the truth. There is no way to quickly change the display of Metadata in Browser or List View.
You can tell from the form of the Settings - Window (Command - J) that there is no way anymore. You have one Standard View, and one Extended.
Strange. I did not use it a lot, I always display pictures to customers with no metadata, except when we do a selection on site (and then its standard with only rating).
wok4

Adobe CQ5.5 Digital Asset - Delete default metadata and how to create custom metadata

Hi
I am trying to create custom metadata for all format of assets (PDF, DOC, TXT, etc.,). I have created the dam folder under apps node as below:-
Step 1: /apps/dam/content/asseteditors/formitems
Step 2: Included the four property as textfield and selection according to our requirement under formitems
Step 3: I changed the cq:allowedTemplates from /content/dam/jcr:content
Step 4: I tried to upload the asset, I could get the custom metadata for Txt, Doc, PPT, XLSX
Step 5: But for JPG, PNG and PDF I am getting the default metadata which is huge list.
How to control this one? I want my custom metadata only displayed for creation assets. Find the attached.
CRX - Custom Template Configured
CRX - Custom Metadata populated for ZIP format
CRX - Custom Metadata not populated for PDF format

Hi,
If you read the description under section http://dev.day.com/docs/en/cq/current/dam/how_to_edit_metadata.html#Creating New Metadata Property for Assets you will find yout the format for images and its different format stores at different location. So to deal with image metadata plz try below
1. Create a "image" node under "/apps/dam/content/asseteditors" as sling folder and configure it similar to "/apps/dam/content/asseteditors"
2. under this folder again copy paste the "/libs/dam/content/asseteditors/formitems" and customize it accordingly
Above will help you to manage with all types of images. Now if you want to have separate group of property for different image types then similar to above you have to create format node inside image folder for example jpg file type create a node with name "jpeg" under "image" node & configure similarly as you did for image.
I hope it will help you to proceed. Please let me know for more information.
Thanks,
Pawan

Reg.Authorisation for Production Order

Hi all,
Please tell me that whether Authorisation can be set for Production order Releasing or not.
My requirement is One person will generate Production But he is not authorised to release it.
The Other Person who is senior to him is the only person who is authorised to release the Prod.Order.That is once the Prod. order is generated & saved ultimately a message should reach the senior person with the details of prod. order for him to release.
How to do it.
Kindly Give solutions .
Thanks in advance,
M.Badrinarain.

Badrinarain,
You can use user exit PPCO0007 to serve your purpose.
Regarding the info to reach the senior person, you can talk to your Basis consultant to have the required settings, when any new order is created, it will be informed via mail to the senior person.
Hope this helps you.
SmanS

Creating Custom Caption Set

I'm trying to create a custom caption set for Cap 5. I created the 5 seperate bmp files and saved them to the Gallery, all properly named and added the information to the font .ini file. When I open Captivate again the group is present for me to select except that the inside of the box is transparent and I want it to be white like in the .bmp I created in Photoshop. The background of the .bmp I created is all grey, the box is white with an orange outline. What am I missing? I'm not clear on the upper left hand corner pixel things I've been reading, I was assuming since the entire background is grey that I wouldn't have any transparency issues. Any help would be great. Thanks.

I'm having this same problem, but my caption is all white except for the top left pixel. It's FFFFF9, while the rest of the pixels are straight FFFFFF. Unfortunately, that makes it rather difficult to display it on this white page! So I expanded the canvas and filled the canvas with gray. The gray area is not part of the caption itself.
Here's a view of it at 6400%. I used the magic wand to select only the pure white pixels--you can see that the upper left is a different color.
When the caption displays in the dropdown, its thumbnail is also transparent.
The weird thing is, a co-worker is using the caption successfully in Cap 5. She sent me the .bmp and .fcm files, and I saved them into my Gallery>Captions directory. I've tried closing and restarting Captivate, with no success.
I appreciate any suggestions that anyone has!

Custom metadata sets for Productions?

Similar Messages

Maybe you are looking for