Custom method return value will not pass to form

I have created a custom method in my application module that returns a integer value. I am trying to use this value to fetch a row to populate a form. I cannot seem to get the value returned to populate the methodAction binding for the form.
I have no problem displaying the returned value and have no problem populating the form if I hard code a value into the methodAction binding.
I am trying to determine if this is a timing issue on page load, or some other issue with the returned integer.

Hi,
sounds like a lifecycle problem because the method call and execution of the VO iterator happen in the same phase. You can try setting the refresh conditions of the method to prepareModel and the iterator to prepareRender, but I doubt that this will solve the issue.
What is the usecase ? And can the integer be handled within the AM to restrict the query (e.g. to set a ViewCriteria or bind variable)
Frank

Similar Messages

  • Get method return value

    Hi. We're using bytecode instrumentation in a native jvmti agent to monitor method entry/exit. I'd like to capture method return values and report them upon method exit. I see how to obtain local variables, and am indeed doing this when a method is entered; however, I'm not sure how to get a method's return value.
    Thanks for any advice.
    -- david

    You will need to do two things to make this work:
    1) Change the method that your return instrumentation calls to accept a parameter (the return value).
    2) Modify your bytecode instrumentation to call your new function with the return value.

  • How to map AM method return values in the bean

    Hello -
    I have this requirement to map AM method return values in the bean as explained below. Please suggest a solution.
    Scenario: I am calling an AM method, which returns a String object on page load.
    AMImpl Method-
    public String getProfileName (){
    return "Profile";
    I wish to catch this retun value in the Bean Variable on page Load. I have created a methodAction biding on page and invokeAction to call this method on Page Load, but I don't know how to catch this value in the bean. Please suggest how to achieve this. Also, I need to achieve this in jsp page. I can't use TaskFlow for this.
    I am using ADF 11g.
    Regards -
    Rohit
    Edited by: Rohit Makkad on Apr 21, 2010 12:23 AM

    Hi, I think there are two ways, from the data control drag n drop the methods return value to the page. This way a binding for that will be created at the page definition eg retVal.
    and in the backing bean you can access it by calling resolveExpression("#{bindings.retVal.inputValue}")
    You can also call your method directly from the backbean
    ((YourAppModuleImpl) getBindings().getDataControl().getApplicationModule()).yourMethod();
    public DCBindingContainer getBindings() {
    return (DCBindingContainer) resolveExpression("#{bindings}");
    I dont know if the second method suits you
    Tilemahos

  • Values not passing from form to context attributes (value attributes)

    Hi Experts,
    I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
    For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
    Please advise.
    Thanks,
    Shobhit

    Context
       GetData - ModelNode mapped to controller context (DataSource)
             Attribute1 - Value Attribute (Form Field)
    Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
    I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
    If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
    Thanks,
    [email protected]
    OK. When I create a Fresh Adobe Interactive Form application, it works fine.
    The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
    You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
    Message was edited by:
            Shobhit Swarup Mathur

  • T-SQL and CLR types for return value do not match

    Hi I am trying to create a CLR function to call a webservice, the CLR function return data type is double, whether I try
    to create this as a table valued funcion or a scalar to return a distance travelled value I am receiving the error below. I've tried changing data types around in the CLR side and the SQL side but keep receiving the same error message, any help would be appreciated,
    Thank you,
    [Microsoft.SqlServer.Server.SqlFunction(Name = "DistanceCalc")]
    public static Double DistanceCalc(Double SrcLat, Double SrcLong,
    Double DestLat, Double DestLong)
    MileageWS ws = new MileageWS();
    ws.Url = "http://test.isp.ca/Distance.asmx";
    int intUom = 0; // 0 = Mile, 1 = KM
    RouteType RouteMethod = RouteType.Practical;
    Requester RequestedFrom = Requester.LinkRoute;
    Double distance;
    distance = ws.GetDistanceInfoForLonLat(SrcLat, SrcLong, DestLat, DestLong, intUom, RouteMethod, RequestedFrom);
    return distance;
    CREATE FUNCTION DistanceCalc
    @SrcLat as float, @SrcLong as float,
    @DestLat as float, @DestLong as float
    RETURNS TABLE (Distance float)
    External NAME CLRfunctions.RIFunctions.DistanceCalc
    GO
    Error received when try to Create function ...
    1, Level 16, State 2, Procedure pcMiler, Line 6
    CREATE FUNCTION for "pcMiler" failed because T-SQL and CLR types for return value do not match.

    You defined at table-valued CLR function, but I think you meant to define a scalar CLR function. That might be the cause of the error.
    RETURNS TABLE (Distance float)
    should be
    RETURNS (Distance float)

  • I have a power pc g5 and it will not pass a gray screen

    I have a power pc g5 and it will not pass a gray screen, i have read resolution online but the system wont detect my keyboard. have been using a microsoft one normally. tried with an official apple keyboard and still no joy. what can i do?

    How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
    http://support.apple.com/kb/HT1436
    Earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Does it fail all these modes?
    Does it boot into any of these modes?
    Holding Option/alt key at bootup.
    Holding SHIFT key at bootup.
    Target mode...
    http://support.apple.com/kb/HT1661
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    We might get clues with verbose mode...
    http://support.apple.com/kb/HT1492

  • HT4623 I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working f

    I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.

    Have you tried the following troubleshooting document?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.

  • When I run this VI "Waveform Time to Date Time String" in LabView 7.0 it will not pass decimals of seconds.

    When I run this VI "Waveform Time to Date Time String" in LabView 7.0 it will not pass decimals of seconds. From decimals of inputline. If i disconnect the input to the subVI "Get Date/Time string vi" it will work propperly, it also doses if I reconnect it. I use LabViev 7.0.
    So the problem i solved, but i dosent understund why it works in this way. Does it indicate other problems which will make my researchprogram unrelaible ?
    Attachments:
    Waveform_Time_to_Date_Time_String.vi ‏18 KB

    Hello.
    I checked your vi and it fails as you state.
    It runs fine if: 1 Convert number to timestamp OR
    2 Wire a constant to want seconds?
    In labview 7.1, no problems.
    I think is a job for NI engeniers.
    Hope it helps
    Alipio
    "Qod natura non dat, Salmantica non praestat"

  • Selecting an lov parameter value sometimes not passed correctly

    When selecting a value from an LOV parameter, sometimes the parameter value doesn't seem to get passed correctly to the data template query.
    For example, let's say I have the following LOV parameter called "risk":
    Some Risk
    New Risk
    Other Risk
    Last Risk
    When I select "Some Risk", I would get correct results and when viewing the "Data" xml, I can see the parameter with the right value:
    <RISK>Some Risk</RISK>
    But when I select "New Risk" the results are incorrect and the xml shows:
    <RISK />
    as if the value was not passed as the bind parameter value for the dataset query.
    Any idea what I'm doing wrong? Is this a BIP bug or is there a workaround?

    Hi, thanks for the reply.
    The LOV is of "SQL Query" type (not fixed data) and the values were retrieved from the database.
    Supposing this was the sql query for my "risk" parameter LOV:
    select dimvaltl.GENERIC_VAL_NAME
    from GENERIC_VAL_TL dimvaltl,
    GENERIC_TL dimtl
    where dimtl.GENERIC_NAME = 'Risk'
    and dimvaltl.GENERIC_ID = dimtl.GENERIC_ID
    order by dimvaltl.GENERIC_VAL_NAME
    And supposing this was the sql query in the data template dataset:
    select pdimv.ID
    from GENERIC_V pdimv
    where pdimv.NAME = 'Risk'
    and pdimv.VALUE in (:risk)))
    If risk is empty, obviously the query would not work. I noticed the xml generated sometimes show the selected parameter value and sometimes don't, as if BIP is not passing it to the dataset query as bind parameter value.
    Incidentally I have other lov parameters that works fine, the only difference I can think of is that for this LOV query I am doing a join instead of a simple select statement from one table.

  • SAP HCM P&F - Update an infotype field which is NOT passed from Form

    Dear Experts,
    I have a requirement to update the Infotype with the entries in the HCM form (input by Employee in ESS) upon Manager's approval in MSS.
    We are achieving this functionality using HCM P&F (FPM) with an Workflow associated.  In this Workflow Standard Task (TS17900108) is used to Save the form data into the Database.
    But there is one field (APPROVED_DATE) in the Infotype whose value is not from the FORM but should be updated in the Infotype.
    Please help me with your inputs.
    Regards,
    Shankar

    Dear Christopher,
    I am extremely thankful to you for all the replies.  But, unfortunately, we are messed up with this requirement and we couldn't achieve it.
    In this regard, could you please give us the step-by-step procedure to achieve this functionality?
    Requirement in brief again:
    We have designed Overtime HCM form (FPM) using which employee requests for the Overtime.  This form is sent for the Manager for approval.  We have achieved this functionality.  With the Manager Approval, the database is also updated perfectly.
    Then we have added one more field in the infotype to track the Approved Date.  This field is to be updated along with the other fields (sent from FORM) upon the approval of the manager.
    And now though the other fields are updated correctly into the infotype, the approved date is not updated.
    Thanks a ton in advance for your guidance as this is very critical and urgent requirement for us.
    Regards,
    Shankar.

  • Acrobat will not open a form

    This is a weird one.
    As of last week, my acrobat pro will not open a "form".
    Unless I disconnect from the network, then it opens fine.
    The form can be opened on any other computer in the company but not this one, if it's connected to the network.
    What I have done.
    Uninstalled, and re-installed.
    Uninstalled the network software reinstalled
    The only think I have not done is reinstall the entire OS.
    Ideas anyone?
    thanks!
    Nancy

    What does "will not open" mean? Is there an error message of some kind?
    Does this only happen with one file, or with all files?
    Is this file located on a network drive? If so, what happens if you copy it to your local computer and try to open it?
    What's your exact version of Acrobat and OS?

  • Dashboard prompt value is not passing into the report

    Hi,
    I am using OBIEE 10g. The problem is in Oracle BI Answers
    I have a prompt and its related report. In the prompt, in one of the column, I am using sql result. The sql query is a co-related sub query where i have used 2 tables. employee_data and employee_region. The reason for using sub-query is that there is no data_center column in the employee_data table. It has the records for all the data_center e.g USA, UK,IND,AUSTRALIA etc So, I used the sub query with condition which will give the result on a particular data center (here it is USA) and this sub query's output is input for the main query. And the prompts works fine and gives correct result
    The sql query used for the column in the prompt (in Oracle BI Answers) as
    SELECT EMPLOYEE_DATA.ENAME FROM EMPLOYEE WHERE EMPLOYEE_DATA.ENAME IN (SELECT EMPLOYEE_REGION.ENAME FROM EMPLOYEE WHERE EMPLOYEE_REGION.DATA_CENTER = 'USA')Now in the report, there are 2 coulmns. - EMPLOYEE_DATA.ENAME and EMPLOYEE_REGION.DATA_CENTER
    I have used the main column EMPLOYEE_DATA.ENAME for filter as 'prompted'.
    The problem is the value from the prompt is not passing from the prompt to the report, what I found. Because, instead of showing the result for 'USA' data_center, It also shows other data_center 's (UK,IND,AUSTRALIA) data.
    How filter condition I should use for EMPLOYEE_DATA.ENAME column in the report so that the prompt value will pass to the report properly ?
    Thanks
    Edited by: Kuldip on Feb 21, 2013 6:17 AM

    Hi Kuldip,
    There are 2 ways of doing it.
    1. Nice and good: For the section where the report is put have a condition to display only if it returns rows. For details please refer to :
    http://bischool.wordpress.com/category/guided-navigation/
    2. The easy way: Add a "No Result" view to your report and add few spaces in the text.
    Let me know if this helped.
    Regards,
    Jay

  • BEx Variable default value does not pass thru to Webi report

    Hi,
    It appears that the integration between BEx and BOBJ Webi does not support default values when the webi report is scheduled.  This means that if Webi/Infoview is the delivery method, than clients require 2 reports.  1 for adhoc and 1 for scheduling.  Is there another way around this so 2 reports are not required?  See SAP Knowledge Base Article  https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136363534393826
    Regards,
    Dae Jin

    Hi,
    Yes it is not supported. you can achieve by writing customer exit for this.
    in istep 2,
    check whether the variable value is intial.
    if intial
    pass default value
    if not intial (else)
    dont do any change, just pass the user input to restriction.
    -Sriram

  • How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

    Here is my problem and here is the solution!!!
    My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks. 
    AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
    For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
    If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds. 
    Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me. 
    Cлава Україні!!! Героям слава!!!

    I thought this was the method I used before but I followed through it and it was a horrific fail.  "Operating system not found".  Can anyone help?
    http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
    Steps To Achieve Victory
    Download the ISO you want to use
    Open Terminal (in /Applications/Utilities)
    Convert .iso to .img using hdiutil:
    hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
    Rename if OS X gave it a .dmg ending:
    mv /path/to/target.img.dmg path/to/target.img
    Type diskutil to get a list of currently connected devices
    Insert USB drive you want to use
    Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
    Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
    Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
    Run diskutil eject /dev/diskN and remove your USB stick
    The USB stick will now be ready to use
    Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

  • Screen filed values are not passing to program

    Hi Good Evening,
      I have appended strcture ZCORP to LFA1. The ZCORP structure having two fields ZGRP_D & ZNAME1. In the screen  I have added two screen fields LFA1-ZGRP_D & LFA1-ZNAME1 from data dictionary.
    When I enter values to these two fields it's not passing back values back to the program.
    The declaration would be like
    DATA: LFA1-ZGRP_D LIKE LFA1-ZGRP_D ,
          LFA1-ZGRP_D LIKE LFA1-ZGRP_D .
    After pressing save I need to copy these values into below fields.
       zmat_grp = LFA1-ZGRP_D.
      zgrp_d   = LFA1-ZNAME1 .
    But the values in LFA1-ZGRP_D & LFA1-ZNAME1  showing blank. Please guide me where is going in this case.
    I will be very helpful.
    Thanks & Best Regards,
      Mahesh

    Hi,
    You need to pass or assign the values in PAI.
    MODULE user_command_9000 INPUT.
    MOVE LFA1-ZGRP_D  TO zmat_grp.
    MOVE LFA1-ZNAME1  TO zgrp_d .
    ENDMODULE.
    Hope this helps you.
    Plz reward if useful.
    Thanks,
    Dhanashri.
    Edited by: Dhanashri Pawar on Jun 18, 2008 1:12 PM

Maybe you are looking for