Custom Monitor do not create alert

hey there,
i have created a custom monitor (monitor a specific service)
The Monito is enabled and scoped to "MyServers"
In case not running Health State=Critical
Alerting is enabled and set to generate, wenn Monitor is in critical health.
Severity is set to critical
if i stop the service the health state changes to critial but no Alert is created...
I found some posts about scoping, but this seems to be correct
Any ideas, hints?

Hi,
Based on my understanding, the health state did change when the service is stopped, but you did not recieve the alert. As the health state changed, so the monitor should work, and I would like to suggest you recheck the monitor alert setting:
Make sure you select Generate an alert when: The monitor is in a critical health state.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

Ping Status Monitor doesn't create any alert

Hello,
for Windows Server you have the Ping Status Monitor testing connection to the servers. We have the problem, that if a server is not reachable the alert does not occure. We test it with one server - disebled the network card and the monitor does not alert.
If I ping the server from the scom console it fails but status view and state change are still green.
Is there something wrong with the monitor?

Hi,
Ping Status Monitor
This monitor pings a agentless computer using an ICMP ping. If the computer is agent-managed, it ping itself locally.
Please try to enable the Monitor Computer Not Reachable and
Health Service Heartbeat Failure.
For more information, please review the link below:
How Heartbeats Work in Operations Manager
http://technet.microsoft.com/en-us/library/hh212798.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

Early watch alert task not created in SDCCN in satellite system

Hello Everyone,
I am trying to configure EWA in solution manger 7.0 ehp1. I have added the system in SMSY, created RFC SM_SIDCLNTXXX_READ and SM_SIDCLNTXXX_TRUSTED in solution manger and also created RFC SM_SIDCLNTXXX_TRUSTED and SM_SIDCLNTXXX_BACK in satellite system sucessfully.
The Early watch Alert in TA DSWP is showing me a red flag. The job /BDL/TASK_PROCESSOR in satellite system is being sucessfully finished.
The problem I am facing is I cannot find task Early watch Alert in SDCCN in my satellite system and can not create other RFC such as SAPOSS and SDCC_OSS
Could anyone please suggest how should i go about it?
Component version of my satellite system is
ST-A/PI - 01M_SCM570
ST-PI - 2005_1_700 00003

Hello Sohrab
1) The SDCCN task logs will be on the Done tab - You can also check the logs in SLG1 at the time, there could be more information there.
Typically the refresh definitions will have nothing, except when there are updates, so it is not unusual to see no updates here each time the task runs. If there are service sessions the maintains package should pick them up with refresh service task.
Is the SM_<SID>CLNT<nnn>_BACK RFC set as the master in SDCCN?
One test you can make is create a Refresh session task on the satellite. This is the task that the Maint. Package should run.
It will just be easier for testing. If the refresh session task does not create any EWA tasks for the service sessions outstanding, then there is a configuration issue.
If it works, then the Maintenance task is failing before it can shcedule the refresh session task.
I realize I haven't offered a solution, but a way of finding out where it is failing. Once we isolate where it is failing, we reduce the possibilities of what it could be, and we should be left with the solution.
So forget the Maintenace Package for Now. Lets see if you can pull the service sessions with a Refresh Session Task.
You know in the SDCCN task logs errors in the logs are prefaced by what looks like a yellow lightening bolt.
So if you see these in any of the logs, you are encountering an error, and you should copy it here.
Hope this helps to move you forward.
Regards,
Paul

Business partner Customer is not created for Sales B Role in R/3

Hi,
I am trying to create Customer for a business partner associated with itin Tcdoe BP. I m giving the account management and Payment terms Tab details and clicking on SAVE button. The screen values are not retained and the Customer,Comapny code combination is also not created.
thanks,
Deepthi.

OSS Note 1254214 is applied and it is solved.

Change document log not created for customer in Batch input/BDC

Hi Guys,
Change document log is created when you manually change the customer using XD02 but when run the Batch/BDC the values are Changed but the change document is not created.
Please someone can give me some hints?
Luca.

Any update guys????
Regards,
guru singh

SRM alert configurations for SUS ASN not created in SRM SUS system

Hi All,
We are trying to configure the SRM ASN alerts with the alert category SRM_SUS_AVIS ( Alerts for ASN-SUS) by the same way we did for the SRM_BID_INV for bidinvitation in different client and scenario.
Is the configuration for SUS anyway different than EBP? ( I have posted another thread for bid alert doubt and later it was configured and working fine sometime ago)
If the config for SUS ASN alert is different then what is that?
With our configurations in SLAERT and ALRTCATDEF, and thru RSALERTTEST job we are getting alerts for PO not viewed and Order confirmation not created.
But we are not able to get alerts for ASN not created.
Can anyone throw some light on this please?
Best regards,
Sridhar

Vendor data is maintained in table CRMD_PARTNER only when transactional documents exist for the vendor.

OWS-00102 Reason for not creating a custom Java type: simple or mixed conte

Hi ,
I am generating the java proxies from a WSDL file in Jdeveloper and I am getting the below warning.
WARNING: OWS-00102 Mapped {http://xmlns.fmr.com/systems/dev/aar/requests}ViewRequestStatusResult to javax.xml.soap.SOAPElement ViewRequestStatusResult. Reason for not creating a custom Java type: simple or mixed content is not supported.
I have tried using Jpub as well, but it does not work as well.
I am very new to JAVA and It seems some java code needs to be created. can any one please help me how to resolve this issue.
Thanks and Regards,
Vineet

var cResponse = app.response({
cQuestion: "Enter the section number to appear in the stamp.",
cTitle: "Section Number",
cLabel: "Section Number:"
if (cResponse == null) {
event.value = '*INVALID*";
else
event.value = cResponse;
You can only remove the 'Warning JavaScirpt" is by creating a special application folder script for the 'app.response' method that uses the 'trustedFuncton' to suppress this security warning. Then in you form, you will need to test for this function and either issue a warning about the missing function or run the 'app.response' code and live with the warning. Each system will need the special application folder script installed on it.

MDM Business Partner 5.5 Not Creating Customer Master in SAP ECC

Hi,
I am importing Business Partner into ECC from MDM using XI with BP Business Content. This is done using proxy.
The business partner is created sucessfully but the customer master table KNA1, KNB1 is not being populated.
Does anyone experienced this before? Or has a solution for this?

I am not creating customer in ECC. I am creating Business Partner, this is because we are using IS-U which uses the BP instead of the Customer Master.
So we are using the MDM BuPa to ABAP BuPa mapping.
The thing about this is, when we run the transaction BP to create Business Partner, it automatically creates a mirror KNA1 record to match the business partner. But through MDM-XI proxy, it is not creating the record.

Customer is not created, while updating in a Tcode BP for a existing BP No

Hi,
Customer is not created against the Comapny code and business partner. suggest any notes to be implemted.
thnaks,
deepthi.

Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the details in Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number.
Regards,
Deepthi.

I have problem sending a email ..spool not created using custom FM

Hi experts,
i have problem sending a email ..spool not created using custom FM...this the custom FM
* Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
Source code
this is the source code for this FM
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    IF sy-subrc IS NOT INITIAL.
      MESSAGE e040(zhrcd) RAISING spool_not_created.
    ENDIF.
    PERFORM process_email USING email1
                                email2
                                email3
                                subject
                                attachment_name.
    WAIT UP TO 5 SECONDS.
    SUBMIT rsconn01 WITH mode   = 'INT'
                    WITH output = 'X'
                    AND RETURN.
ENDIF.....
Please let me know
Edited by: Thomas Zloch on Nov 16, 2010 5:53 PM - please use code tags

Hi srinivas ,
Could you please Check
FORM summary_report .
DATA: lv_success TYPE i,
          lv_error TYPE i,
          lv_total TYPE i.
DESCRIBE TABLE gt_data LINES lv_success.
DESCRIBE TABLE gt_error LINES lv_error.
DESCRIBE TABLE gt_message LINES lv_error.
lv_total = lv_success + lv_error.
lv_total = lv_success.
gwa_summary-record = text-008."Number of Successful records.
gwa_summary-number = lv_success.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-009."Number of error records'.
gwa_summary-number = lv_error.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-010."Total number of records processed.
gwa_summary-number = lv_total.
APPEND gwa_summary TO gt_summary.
CLEAR gt_fieldcat.
gwa_fieldcat_summ-col_pos = 1 .
gwa_fieldcat_summ-fieldname = 'RECORD'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-011."Records
gwa_fieldcat_summ-outputlen = '70'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
gwa_fieldcat_summ-col_pos = 2 .
gwa_fieldcat_summ-fieldname = 'NUMBER'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-012."Number
gwa_fieldcat_summ-outputlen = '10'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
ENDFORM.                    " SUMMARY_REPORT
*&      Form ERROR_REPORT
FORM error_report .
gt_fieldcat_err[] = gt_fieldcat[].
gv_fieldcat_err-col_pos = 1.
gv_fieldcat_err-fieldname = 'PERNR'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-070."Employee Number
gv_fieldcat_err-outputlen = '20'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
gv_fieldcat_err-col_pos = 2.
gv_fieldcat_err-fieldname = 'MESSAGE'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-071."Error Message
gv_fieldcat_err-outputlen = '80'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
ENDFORM.                    " ERROR_REPORT
*&      Form FINAL_REPORT
FORM final_report .
DATA:lv_layout TYPE slis_layout_alv,
         lt_events_summ TYPE slis_t_event,
         lv_events_summ LIKE LINE OF lt_events_summ,
         lt_events_det TYPE slis_t_event,
         lv_events_det LIKE LINE OF lt_events_det,
         lt_events_err TYPE slis_t_event,
         lv_events_err LIKE LINE OF lt_events_det,
         lt_events_msg TYPE slis_t_event,
         lv_events_msg LIKE LINE OF lt_events_det.
lv_events_summ-name = 'TOP_OF_PAGE'.
lv_events_summ-form = 'TOP_OF_PAGE1'.
APPEND lv_events_summ TO lt_events_summ.
lv_events_det-name = 'TOP_OF_PAGE'.
lv_events_det-form = 'TOP_OF_PAGE2'.
APPEND lv_events_det TO lt_events_det.
lv_events_err-name = 'TOP_OF_PAGE'.
lv_events_err-form = 'TOP_OF_PAGE3'.
APPEND lv_events_err TO lt_events_err.
lv_events_msg-name = 'TOP_OF_PAGE'.
lv_events_msg-form = 'TOP_OF_PAGE4'.
APPEND lv_events_msg TO lt_events_msg.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat_summ
      i_tabname                        = 'IT_SUMMARY'
      it_events                        = lt_events_summ
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_summary
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF CHK_DTL IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat
      i_tabname                        = 'gt_data'
      it_events                        = lt_events_det
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_data
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_err
     i_tabname   = 'gt_error'
     it_events   = lt_events_err
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_msg
     i_tabname   = 'gt_message'
     it_events   = lt_events_msg
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_err
      i_tabname   = 'gt_message'
      it_events   = lt_events_err
    TABLES
      t_outtab    = gt_message.
IF GT_MESSAGE[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_msg
      i_tabname   = 'gt_message'
      it_events   = lt_events_msg
    TABLES
      t_outtab    = gt_message.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
   i_interface_check             = ' '
IS_PRINT                      =
   i_screen_start_column         = 0
   i_screen_start_line           = 0
   i_screen_end_column           = 0
   i_screen_end_line             = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER       =
ES_EXIT_CAUSED_BY_USER        =
EXCEPTIONS
PROGRAM_ERROR                 = 1
OTHERS                        = 2
ENDFORM.                    " FINAL_REPORT
*&      Form top_of_page
      text
FORM top_of_page1.                                          "#EC CALLED
WRITE text-013."SUMMARY REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page2
      text
FORM top_of_page2.                                          "#EC CALLED
WRITE text-014."DETAIL REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page3
      text
FORM top_of_page3.                                          "#EC CALLED
WRITE text-015."ERROR REPORT
ENDFORM.                    "top_of_page
*&      Form EMAIL_NOTIFICATION
FORM email_notification .
DATA: lv_email1 TYPE somlreci1-receiver,
       lv_email2 TYPE somlreci1-receiver,
       lv_email3 TYPE somlreci1-receiver,
       lv_subject TYPE char200,
       c_flag     TYPE c           VALUE 'X',
       lv_attachment TYPE char50.
CLEAR: lv_email1,
         lv_email2,
         lv_email3,
         lv_subject,
         lv_attachment.
SELECT SINGLE email1
                email2
                email3
    FROM zhr_interface_pr
    INTO (lv_email1,lv_email2,lv_email3)
    WHERE zinterfaceid EQ gc_objectid.
IF sy-subrc EQ 0.
    IF sy-batch EQ 'X'.
Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "
Edited by: katewinslate@SAP on Nov 17, 2010 12:50 PM

Customer is not created in sales area

hello gurus,
when i am creating sales order the output is not triggered and i am getting the error Customer is not created in sales area
how to solve this problem ichecked vd02 trasncsiotn and this custoemr exists for the sales area
afzal

Hi,
Check whether the partner function has been assigned the out put type or not?
Suresh
Edited by: sureshbabusure on May 8, 2010 9:07 AM

ABAP Central Service not available alert in Technical Monitoring

Hi Gurus,
Need help with this alert which i am getting from Solman 7.1 SP10.
ABAP Message Server Status
XXX-ABAP
3
3
3
No process found for: msg_server(.*)
I have already checked following notes but no luck
1419603 - Missing ABAP SAP Central Services (ASCS) instance in SLD/LMDB
1916237 - ABAP Central Service not available alert in Technical Monitoring
Our managed system kernel is 720 P 401 as per-requisites for the sld registration.
Have tried few things here and there but no luck.
Please suggest is any has any suggestion or solution.
Dev

Hi Roland,
I followed the note 1717846 and performed all the steps successfully.. But still no luck with ASCS in SLD.
Any ideas or suggestions .?
Attaching the logs for your reference:
Tue Apr 15 15:52:23 2014 Parsing XML document.
Tue Apr 15 15:52:23 2014 Supplier Name: BCControlInstance
Tue Apr 15 15:52:23 2014 Supplier Version: 1.0
Tue Apr 15 15:52:23 2014 Supplier Vendor:
Tue Apr 15 15:52:23 2014 CIM Model Version: 1.5.29
Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/XXX/SYS/global/slddest.cfg' as data source
Tue Apr 15 15:52:23 2014 HTTP trace: false
Tue Apr 15 15:52:23 2014 Data trace: false
Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/xXX/SYS/global/slddest.cfg' as data source
Tue Apr 15 15:52:23 2014 ******************************
Tue Apr 15 15:52:23 2014 *** Start SLD Registration ***
Tue Apr 15 15:52:23 2014 ******************************
Tue Apr 15 15:52:23 2014 HTTP open timeout = 420 sec
Tue Apr 15 15:52:23 2014 HTTP send timeout = 420 sec
Tue Apr 15 15:52:23 2014 HTTP response timeout = 420 sec
Tue Apr 15 15:52:23 2014 Used URL: http://sapr6bv:51600/sld/ds
Tue Apr 15 15:52:23 2014 HTTP open status: true - NI RC=1
Tue Apr 15 15:52:23 2014 HTTP send successful.
Tue Apr 15 15:52:23 2014 Return code: 200 --- Return message: (OK)
Tue Apr 15 15:52:23 2014 HTTP response: Success. HTTP status code: 200
Tue Apr 15 15:52:23 2014 ****************************
Tue Apr 15 15:52:23 2014 *** End SLD Registration ***
Tue Apr 15 15:52:23 2014 ****************************

Oracle Alert: Perticular Customer Not Receiving Alerts on Order

Hi,
The issue is regards to Alert in Order Management "Field Replenishment Orders Shipped"
Purpose of this is to send the alert to customer on Order.However it working for few of the customer and not working for few of the customer.
If i checked from query side it is fetching the Email Address for that customer who is not receiving this mail.
If we put the developers mail id on alert form it is working (Developer Receiving the mail).
Please suggest me the way to test it. As we do not test directly with client's customer mail ID.
Waiting for your support
Thank You.
Regards,
Manoj
Edited by: Manoj Jain on Aug 27, 2012 7:14 AM

Sounds like the problem may be at the customer end. Email may be blocked or going to a spam folder. You should have your IT dept. work with customers to modify email settings to make sure they are not being blocked at the customer site.
HTH,
--Johnnie

How to select my custom monitor calibration profile into Lightroom 5.7? I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

How to select my custom monitor calibration profile into Lightroom 5.7? I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

The monitor profile is set at system level. Lightroom will find it there and use it. You're not supposed to do anything, i1 Profiler will do it all for you.
Go here to confirm that the right profile is set as system default (Windows):

Custom Monitor do not create alert

Similar Messages

Maybe you are looking for