Custom Mpg2 transport stream

Can I output a file with a custom mpeg 2 TS
required output 16:9, 1360x768@60p
Compressor only seems to allow limited output (to standards)
Tried ffmpeg but the output is disturbingly out
Help?
Thabks

Hi Folks, anyone have any ideas about this problem, I need to deliver this work in the next 48 hours:)
Thanks
Lee

Similar Messages

Wsus Sync Failed. WebException: The underlying connection was closed: An unexpected error occurred on a send. --- System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream.

Hi I have installed wsus 3 sp2 on a win 2008 R2 Sp1
before the installation , I have updated the windows
I can open easily browse internet , but when I try to configure synchronization .but it fails.
No firewall , no proxy ............. I am behind a nat.
Wsus version is 3.2.7600.256.
I have searched and searched .....
Can any body help me
WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream.
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
   at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
   at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
   at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
   at Microsoft.UpdateServices.Serve

Hi
yes . it is alloweded.
Nat rule permits any ip traffic . No problem with https...
also my windows is fully updated.
here is my netstat -an , maybe usefull.
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING
TCP    0.0.0.0:8530           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8531           0.0.0.0:0              LISTENING
TCP    0.0.0.0:47001          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49155          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49156          0.0.0.0:0              LISTENING
TCP    --------------------:139       0.0.0.0:0              LISTENING
TCP    --------------------:8530      172.16.2.201:53317     ESTABLISHED
TCP    --------------------:49362     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49363     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49367     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49377     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49414     131.253.34.141:443     ESTABLISHED
TCP    --------------------:49416     216.239.32.20:80       ESTABLISHED
TCP    --------------------:49417     216.239.32.20:80       ESTABLISHED
TCP    --------------------:49418     173.194.70.113:80      ESTABLISHED
TCP    --------------------:49419     173.194.70.113:80      ESTABLISHED
TCP    --------------------:49420     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49421     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49424     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49425     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49426     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49427     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49428     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49429     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49430     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49431     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49432     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49433     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49434     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49435     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49436     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49437     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49438     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49439     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49440     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49441     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49442     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49443     88.221.93.54:80        ESTABLISHED
TCP    --------------------:49444     88.221.93.54:80        ESTABLISHED
TCP    --------------------:49445     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49446     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49447     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49448     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49449     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49450     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49451     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49453     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49456     65.55.58.184:80        ESTABLISHED
TCP    --------------------:49457     65.55.58.184:80        ESTABLISHED
TCP    --------------------:49460     131.253.34.142:80      ESTABLISHED
TCP    --------------------:49461     131.253.34.142:80      ESTABLISHED
TCP    --------------------:49462     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49463     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49464     63.251.85.33:80        ESTABLISHED
TCP    --------------------:49466     131.253.40.50:80       ESTABLISHED
TCP    --------------------:49467     131.253.40.50:80       ESTABLISHED

Generating transport stream for dectek card - testing purposes

Hi
I'm going to buy the recently released dectek card: DTA-110TSP in order to make MHP testing.
Before getting it I asked about the possibility to use this card in order to make mhp testing... they assured me it is possible, but that I have to provide in input a transport stream with my xlets embedded in it.
So, my question... How can I generate a transport stream and add my xlet in it in order to send it to the card? are there free software that allows this? or low cost softwares?
thanks for any help
Ignazio

hi mr halil
your question is not completely clear to me.
if your question is: is this justdvb-it carousel software good enough to run 24x7 on a broadcaster network, i'm going to say a sound yes: we have plenty of regional broadcasters in italy using this server for interactive tv
if your question is: will i be able to configure properly the justdvb-it config files and a linux box so as to put in place a reliable system for my broadcast.. the answer is: this is just a matter of skills and knowledge.. (both on dvb/mhp and linux OS)
this is exactly the "value add" we give to our customers.. anyway, it's a long story, and an off topic one. so if you want, contact me to my email address [email protected]
bye
andrea venturi

MPEG-2 Video, .m2v, Transport-Streams

I have searched through all of the Forum but still no solution.
Like many people here I have QT PRO (on Leopard) and the MPEG-2 Playback Codec (Version 6.4.1) installed. When I record from TV via Cable or DVB-T I always get a MPEG-2 Transport Stream. I know how to handle these and I know how to convert them. My question is regarding the Finder Preview Issue.
When you have selected in Finder to show the Preview of a file it will go for a long cup of coffee when it comes to selecting a .m2v or MPEG Transport Stream file, i.e. the Finder crashes. This is a phenomina since QT 7. Apple promised a better handling of .m2v for the 10.3.9 Update but I cannot see any changes.
I don't need to preview those files if it is not supported. This would be nice to have but I don't really need to. Is there anyone out there who can tell me how to
1) prevent Finder Preview from crashing or
2) get this to work
I tried some hints from here like re-associating .m2v with the Quicktime Player but it didn't resolve my Issue. Is there maybe someone from Apple reading this and being able to help out?
Many thanks in advance.

Like many people here I have QT PRO (on Leopard) and the MPEG-2 Playback Codec (Version 6.4.1) installed. When I record from TV via Cable or DVB-T I always get a MPEG-2 Transport Stream.
I may be wrong, but I don't believe "true" transport streams have ever been supported by the QT MPEG-2 Playback component and, by extension, would not be supported by either the Finder Preview or QuickLooK.
When you have selected in Finder to show the Preview of a file it will go for a long cup of coffee when it comes to selecting a .m2v or MPEG Transport Stream file, i.e. the Finder crashes.
M2V/AIFF elementary stream files, "muxed" MPEG (MPEG2/MP2 or MPEG2/MP1), and MOV (MPEG2/any compatible audio) all play fine for me in both the Finder Preview and QuickLook. The only problem are VOBs whose video content play fine in the QT Player but have to have their extension changed to MPEG to play in either the Finder Preview or QuickLook. Frankly, I am unable to duplicate your problem except for "true" MPEG-2 Transport Streams, which, as I previously said I don't believe have ever been QT compatible.

Trying to make MPEG2 HD 422 Transport stream at constant bit rate

I am trying to make a Compressor Preset to make MPEG2 HD 422 Transport stream 1920x1080i with a Constant Bit Rate of 15 Mbps and Open GOP structure . but when I select MPEG transport stream I can't make it a Constant Bit Rate and the GOP structure is set to Closed and "Grayed Out"
I am making files for our Playout Server and this is the specs requested by the manufacturer.
Is there a way to make this setting or do I just need to go to Adobe Media Encoder?

K47MU-D wrote:
Is there a way to make this setting or do I just need to go to Adobe Media Encoder?
Media Encoder is a very good choice for what you need to do.
Other than bit rate, Compressor offers very little in the way of adjustments to their presets for program streams and transport stream.
Good luck.
Russ

CS5.5 will not export MPEG2 Transport stream with mpg extension?

I am creating video for the local cable access channel. I have been using the MPEG2 NTSC DV High Quality preset. That preset outputs MPEG layer 2 audio. The cable access coordinator says that those files will not play audio from the Soloist media server, even though the specs for that server calls for MPEG layer 2 audio. Those files play ok in Windows Media Player. When analyzed with AVIcodec, GSpot, and VideoInspector, they all show there is MPEG layer 2 audio. The server shows no audio at all in one of it's reports.
I had previously been using an older version of Final Cut Pro and Compressor. I no longer have access to that computer but I believe I had been exporting a Program Stream. The access channel's documentation calls for Transport Stream. When exporting Transport Stream MuliplexingMPEG2 video in CS5.5 Media Encoder, the output file has the .m2t extension. These 3 codec analyzers aren't recognizing this as MPEG2. I assume that the video server will not recognize this m2t file extension at all. Final Cut's compressor did output the Program Stream MPEG2 with the mpg extension.
Is there a way to export Transport Stream MPEG2 video with MPEG layer 1 audio and have an .mpg file extension on the resulting file?
Also, anyone familiar enough with PID values to know if that could have any bearing on why the MPEG layer 2 audio is not being detected in that video server when I use the MPEG2 NTSC High Quality presets?
Thanks for any help.

Jeff,
I am still waiting to here back from the access channel coordinator to see if the test file encoded this way would be recognized and play correctly. The files can only be tested when the server is off-line so it takes awhile for a response. Thanks for your help. I'll post when I get word of that file status.

How to Import a MPEG-3-ts (Transport Stream) into Final Cut Pro ?

Hello All;
I just bought Final Cut Studio and I am trying to figure out how to import some video footage that I captured using ArcSoft's totalMedia software via a HD HomeRun High Definition TV decoder. I have verified that the video is being saved in MPEG-2 Transport Stream format but I've tried everything but still can't import it into Final Cut Pro. I've purchased the MPEG 2 Quicktime component but then realized that it doesn't work with Transport Streams. Then I downloaded MPEG StreamClip for Mac which does play the clips on a Mac but I need to obtain the codec so I can import them into Final Cut Pro. Any ideas would be hugely appreciated. Thanks. Tim

I do:
"You need to use MPEG Streamclip to convert the files to an editable format, such as those found in Final Cut Pro's Easy Setup menu.
For HD, your best choice is ProRes, DVCPro HD or Apple Intermediate Codec."
And so does Nick.

Exporting to MPEG 2 HD with Transport Stream, 1920x1080

Hi,
I am trying to export a Pr project to the following requested settings: MPEG 2 HD with Transport Stream, 1920x1080. From the Format I selected MPEG2. I also adjusted the frame under the video tab to 1920. However, I have a feeling that something is not right. Please help.

Hi Colin,
Is MPEG2 a HD setting?
Thanks,
Sam

[Cisco FAQ] - Why does the DCM still show a transport stream on a Gbe input although it is not present anymore?

How do I change this?

This usually means that the input transport stream still has some settings o Check the alarm status of the input TS. Here you will see the reason why the TS still exists o Check that all input TS settings are set to the “default” value : to do this double click on the Gbe input TS and check all tabs : Services, TS FEC, TS Settings, TS Loss, TS Backup and make sure “default” settings are applied everywhere o Check that nothing is groomed anymore from the TS. From V5.1 onwards it is possible to right-click an input service and do a “Find Destinations” on it, … When all settings are reset to “default” values and nothing is groomed anymore from the TS, the TS should disappear completely after a maximum of 2 minutes

No audio when compressing .mov to Mpeg transport stream (m2t)

Since reinstalling OSX and FCS2 I don't get audio when I compress a quicktime movie to mpeg transport stream, used to be able to do it. I'm playinh the m2t in mpeg streamclip and assume it will handle audio, settings in compressor look ok, (48K 16 bit) although the button for multiplexed mpeg i/layer 2 audio is greyed out and unticked !?

Answering my own query here, but in case it helps someone else ... there appears to have been sound all along, at least since I ticked the mpeg audio box on the extra tab. When the file is playing in mpegstreamclip you have to work the volume fader down and up again at which point the sound comes on (yes it was faded up initially)
Wierd one, its almost as though there was a faulty physical fader rather than a virtual one.

Can't render muxed MPEG2 with transport stream selected

I'm trying to render an MPEG2 that has the audio integrated with the video (muxed). I was told to select the transport stream option, but when I do, Compressor shows the error icon-that little yellow triangle with the exclamation point. I don't know what it's trying to tell me is the problem. I tried rendering it anyway and of course the render failed.
I'm coming up on a deadline and stand to lose $2000. HELP!

Thanks for the link but it doesn't really address my issue. It's very strange because I don't see any reason why Compressor ought to be failing in the render just because I've selected the transport stream option in the extras tab. I tried a render without that option selected just to see if Compressor was failing on all fronts, but an unmuxed version rendered successfully. I even tried copying my FCP sequence into a new timeline, nesting it and trying to render a .m2t file that way. But that didn't help either. Eventually I downloaded free software called MPEG Streamclip which allowed me to convert a DVD copy of my sequence into a muxed mpg.

MPEG-2 with audio but no transport stream?

We have a Leightronix Nexus, which is a new whizbang digital video playback device for cable studios. It supports transfer of MPEG-2 files, but thus far I haven't been able to make a compatible MPEG-2 file with Compressor. Leightronix only does Windows so they've been of no help.
Here are the requirements as listed in the Nexus manual:
-MPEG-2 Program Stream, consisting of a single elementary video stream with an optional single elementary audio stream. In big letters it says "Transport stream is not possible."
The other specs seem fine; I think it's the lack of a transport stream that fouls it up. Compressor, in the audio checkbox, says "Select this to create an MPEG-2 Transport stream with multiplexed audio."
Is there a way to get audio into an MPEG-2 file without using a transport stream? If Compressor can't do this, are there any other (hopefully inexpensive) tools that can?
One interesting thing is if I copy one of the mpeg-2 files created on the Nexus itself (by having it digitize video), it plays quite fine in Quicktime Player.
Any help is appreciated. Thanks.

Or, you can just use a freeware tool like MPEG Streamclip to combine Compressor's elementary .m2v output with its .AIFF audio and produce a multiplexed program stream. The $10 MPEG2 Works shareware app will also do the same (along with several other operations).

HD Transport stream to SD dvd compliant m2v?

What's the best way to take a high def transport stream (.ts) and convert it to an m2v I can use in dvdsp?
Thanks in advance for any help!
Jason

There is no single setting that will give the "best" results under every possible situation. However, you might want to try 2-pass VBR or a GOP structure of IP with a smaller GOP size. If you try the latter you might also need to increase the target or average data rate by at least several tenths of a Mbps.
Something like the following:
Average data rate: 6.7 (Mbps)
2 Pass VBR enabled
Maximum data rate: 8.4 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 6, Structure: IP

ASI Transport Stream to Flash

Doing a proof of concept for a small prototype activity, and
would like to know if there's a way to go from an ASI stream (h.264
over an MPEG-2 TS) into the Live Encoder Server.
The documentation speaks to an MPEG2 TS as a valid container
supported by FMLE. Is there any information on how to do this
interface? All I read about are video/audio capture cards.
Thanks!

Hi here's an example of specifying si
<program
number = "0x6588">
<pmt
pid = "0x200"
pcrpid = "0x210">
<elementary-stream
id = "video_stream_2"
assoctag = "0x5"
pid = "0x210"
type = "0x02">

<generic-descriptor
tag = "0x6">
<bytes
hexdigits = "02"/>
</generic-descriptor>
<stream-identifier-descriptor/>
</elementary-stream>
<elementary-stream
id = "audio_stream_2"
assoctag = "0x85"
pid = "0x220"
type = "0x04">

<generic-descriptor
tag = "0xa">
<bytes
hexdigits = "656e6700"/>
</generic-descriptor>
<stream-identifier-descriptor/>
</elementary-stream>
<elementary-stream
id = "audio_stream_3"
assoctag = "0x86"
pid = "0x221"
type = "0x04">

<generic-descriptor
tag = "0xa">
<bytes
hexdigits = "66726500"/>
</generic-descriptor>
<stream-identifier-descriptor/>
</elementary-stream>
</pmt>
</program>
</transport-stream>

Compress ac3 into mpg transport stream

I have a surround mix from Protools and I need to make an Mpeg Transport stream with dummy video.
I mixed the surround as L,R,C,LFE,Ls,Rs
I brought the mixdown into Compressor manually as instructed in the manual.
The digital Dolby settings don't have the surround setting I used. The closest is L,C,R,Ls,Rs with a checkbox for LFE.
There is a big whole in the program. In Final Cut Pro I was able to set the Surround Audio settings to my prefered setting
Anybody know what I am dealing with? Anybody find a way to the finished end of this job?

Is there any way to do it in FCS2? We're playing around...from what I've read today, Compressor 3 will make either or, but not both. One guy is swearing he saw it done at NAB.

Custom Mpg2 transport stream

Similar Messages

Maybe you are looking for