Custom Name isn't working properly in the apply custom name preset

The custom field in apply custom name keeps the same name you put in when creating the preset. Shouldn't it leave the "custom" part of the name empty and ready to fill in whenever you apply that preset to a set of clips?
I set it up with the custom name of "Fog-Road". Obviously I don't want to rename every clip in my collection to those words.

Well, in spite of no replies, I continue to investigate this issue. It turns out the behavior is not different on my desktop and laptop. Instead, some files work for the web ID plate, and some don't. I can't figure out the pattern.
Here are some samples I've been playing with.
The first three files do NOT work as an ID plate and are blank on the web page. The last three files do work.
The first file -- yellow logo -- is Index color mode, but when I change it to RGB it still does not work for the ID plate. The two text-only files -- "another test" and "test two" -- were made in PS with a new file, add text, flatten, save. They do not work.
The three files that work -- the last three images -- were made from a JPG with just a crop, then add text, then fill the bkground with black.
Why the first three don't work and the last three do is a mystery.
Maybe now someone here will have a clue.
Thanks to anyone who might be listening.
John

Similar Messages

Back to my mac isn't working properly

After downloading Mavericks, (which went without a hitch), I am now receiving an error in system preferences stating: Back to my Mac isn't working properly
because the DNS server isn't responding. Contact your internet service provider for a different DNS server address, enter it in Network preferences and try again.
In reality everything wireless is working; the internet the printer iPad works fine.
I went to the Airport utility and clicked on my Time Capsule and it states: Change Airport base station from using DHCP and NAT to Bridge mode.
I done that and everything related to the wireless router runs real slow, I mean real slow. It took just under 4 minutes for my Time Capsule to recognize the computer. Due to this I received all kinds of errors from the printer from Airport Utility and the iPad.
I need a fix please, I've read all the support documents related to this in the support community and either the answers given I have tried with no success or they do not relate to my situuation.
Thank you for looking at this, I only hope you have a valid answer.
Jerry

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

HT1526 I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

Hello, not too helpful, but...
enum {
paramErr = -50, /*error in user parameter list*/
Usually means a bvad or unacceptable Charachter in a File or Folder name...
http://support.apple.com/kb/TA20831
Solving Trash Problems...
http://thexlab.com/faqs/trash.html
Open Console in Utilities & see if there are any clues or repeating messages when trying to open Safari or iTunes.

HT1267 My iPod player in my iPhone isn't working properly it will play for a few seconds then stop and also the volume level will appear then disappear what can I do to remedy this?

My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!

If you haven't tried it yet, I'd eliminate memory issues first. Close all of the apps with the double tap on the home button method
http://support.apple.com/kb/HT5137
then restart the device.
http://support.apple.com/kb/HT1430
My experience has been that this fixes a lot of issues.

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3

HT1937 My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

"Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
There is no documentation on how to solve this anywhere.
I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
Any help would be much appreciated
Kenneth

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

[svn:osmf:] 9850: Removed full screen code since it isn't working properly.

Revision: 9850
Author:   [email protected]
Date:     2009-08-31 13:01:06 -0700 (Mon, 31 Aug 2009)
Log Message:
Removed full screen code since it isn't working properly.
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml

You have a tool, that doesn't work in a new version of java.
The tool vendor would be the one to determine whether the tool and/or the new VM has a problem.

Music player isn't working properly, there's no time slider

Since I updated my iphone4 to the latest software my fast forward bar in my music player has gone and I can't drag the song along to the desired place in the song. Please help

alexi sonlian wrote: my in-built webcam isn't working properly...
uf Applz http://support.apple.com/kb/HT2090 dunt helllppp, ("resot" sumtymz helllppp,) mak a gud bakkup. Than "... contact Apple or an Apple-Authorized Service Provider for service."
Same helllppp 4 iSight werkz 4 FaceTime n FaceTime HD camz 2.
alexi sonlian wrote: is it because of updating softwares or sumfin like dat? anyone?? helllppp!!
 > Software Update...
Messij wuz eddditubed by: EZ Jam
Mac OSX 10.7.4

Convolution.vi isn't working properly

I'm using LabView 7.0 and I'm trying to performing a convolution with the convolution.vi. This VI isn't working properly. As you can see in the attached file, the result isn't right even for very small input arrays. The result also depend on the input data format (singel or double etc.)
May be someone had the same problem, or knows something about it. I'm using LabView 7 on an Windows NT system, may be that has something to do with it.
Would be greatful about every hint,
best regards Andy
Attachments:
example_convoultionvi.vi ‏18 KB

Very strange...
Can you open the diagram of the convolution.vi, then double-click on the "Call Library Function Node". What is the Path? (It should be C:\Program Files\National Instruments\LabVIEW 7.0\resource\lvanlys.*).
Could ot be yours points somewhere else?
Now find the lvanlys.dll in explorer. The size of the LabVIEW 7.0 version should be 528384 bytes.
Do a search for lvanlys.dll. How many different versions show up?
LabVIEW Champion . Do more with less code and in less time .

White screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol

white screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol

Hello again V.K,
I'm taking the computer to assistance as suggested. Even tho I'm almost 100% sure that this isn't a hardware issue.
Here is why I'm not wasting my time on my affirmative. I'm computer science bacharelor, I know about computer architeture and S.O architeture and also I'm computer developer for more than 10 years now. All behaviors presented have no connection with hardware problems. What I'm trying to say is that I'm not just saying things for saying, I have a logic behind what I say.
For a short example, whenever mouse right click stops working on a specific window/software, if I click on the window top border and drag it around and go back to the window content, the click works again.
Also, my keyboard and mouse work via usb. Usb is working normally. If I plug a usb memory stick it shows that usb is working as it should be.
On windows, right button click is also not working inside any software window, but if I click on start button, icons on desktop, anything on windows epxlorer, it works as it should be. Isnt't there bootcamp underneath windows ?
on top of it, it's a brand new mac, i have it for 5 months.
All these people that have the same problem, do u think all of them have hardware issues? Do you think Apple would keep releasing new computers with hardware problems and they wont have any information/recall for them? and worst, the problems start in a random date ?
This is my first mac and all these problems, being hardware or not, makes me lose all confidence on Apple products.
Davi.

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

My IPOD classic headport is not working properly. The sound is going in and out?

My ipod classic headport is not working properly. The sound keeps going in and out. I have tried changing headphones and checking the settings. Does anyone have any ideas?

Do a Hard Reset
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

Custom Name isn't working properly in the apply custom name preset

Similar Messages

Maybe you are looking for