Custom nodes are deleted for IMG after upgrade

Gurus,
We are in processes of upgrading form ECC5 to ECCC6.
In ECC5 we have custom node in IMG , which were created using SIMGH.
After the upgrade all the custom nodes are deleted , is there a way to retrieve the custom node or is there a way custom node are not touched during upgrade .
Thanks for the help in advance.
KJ

Hi Ketan,
You have used transaction SIMGH for modifying the SAP reference IMG in the old release. Those modifications gets lost
while upgrading your system. Right?
Even these custom node disappeared from IMG structure, but the customerspecific IMG structures or IMG-activities should be
still available within the upgraded system. That means, you only need to reassign your IMG structures or IMG-activities with transaction S_IMG_EXTENSION .
Those enhancements do not get lost with the next upgrade in future.
With Best Regards
Julia Song

Similar Messages

Cross reference markers are deleted for content in text insets

Cross reference markers are deleted for content text insets. I currently have a chapter that is built from several Import by Reference files. I added an introductory paragraph with cross reference links to heading 2 titles in these text insets. Everything works and saves normally, although the cross reference markers disappear from the chapter when files are checked out a few days later. An extra Heading 2 is also added to the end of the document.
Steps to reproduce:
1. Create a chapter composed of several text insets.
2. Create a list of cross references to headings in these text insets at the beginning of the chapter.
3. Check in/check out the files from a source control product.
What went wrong?:
The cross reference markers are gone, resulting in broken cross references. An empty Heading 2 is also added to the end of the document following the final text inset
What should have happened?:
The markers should remain and the heading 2 tag should not be applied to the document.
Product version:
Product: FrameMaker
Version: 7.2
Platform information:Windows XP
Hardware: Dell Latitude D620
OS Version: Windows XP Professional Version 2002, Service Pack 3.
RAM: 1GB

Thanks for the information, Van. We did try several techniques including adding the insertion point immediately after the text inset before the normal paragraph tag, but none seemed to consistently work. I will investigate this scenario futher, though, in light of your comments.
We have managed to determine a workaround for this issue by avoiding a string of text insets. For some reason, using multiple text insets without separating them with normal text causes most of the problems after we add the files to our source control system. The situaton is not ideal, but it does work for the time being anyway.
Steve

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

Duplicate emails on outlook for mac after upgrading to mavericks

I was getting duplicate emails on my outlook for mac after upgrading to mavericks
After reading several websites, I realise this is a common problem.
some people suggesting checking " prevent app nap"
this seemed to work for a while, but is now back again
it is very difficult to handle, with hundreds of emails downloading each time i log in
regards
seema

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

ALV Layouts are missing in ECC6 after upgrade

Dear Friends,
we have an issue of missing ALV Layouts in ECC6 after upgrade of ECC6 from 4.7 version
For example, we have a custom table ZRCILOT, data displayed using tocde se16, but when we check layout are missing in ECC6 but the same exist in 4.7 version.
please check the attached screen-shots.
kindly suggest, is there any possibility to retrive it.
Thanks,
Munvar Basha.

Hello
Variants should be preserved by the upgrade...
You could export/import layout using the report from the here under note
Regards
551178 - FAQ ALV Layout
During the upgrade of or when importing Support Packages?
Answer: Layouts created by the customer are retained and you can continue to use them.
643330 - ALV layout: Importing and exporting layouts

Adding custom nodes in SAP reference IMG and accessing them using SM30

I was able to successfully add an IMG node and few activities under the node (for our custom configuration table data entry) in SAP reference IMG. (using transaction SIMGH).
However, when I execute transaction SM30, enter the name of the custom table and hit the button customizing, it does not take me to the appropriate node in IMG. It simply doesn't do anything.
For any SAP table or view, this works like a charm (wherever SAP has configured the nodes). But when we create custom nodes for custom tables, it does not work.
What steps am I missing?
I will really appreciate any help you can provide.
Jitendra Mehta

Hi Sree:
I assume you have either created your view maintenance for Z tables or you have created transaction attaching calling SM30 for view maintenance of your Z table.
You may go in transaction SIMGH and in SAP reference IMG, create a main node (wherever your end client wants you to put it) and under this node, you can create sub-node for each view maintenance with a suitable description of sub-node.
Once you save and activate, you are done.
Then you can execute transaction SPRO and you should see your custom nodes wherever you attached them in the tree.
I hope I understood your problem and have answered it.
If not, please let me know and we can discuss it further.
Thanks.
Jitendra Mehta

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Access point are not coming up after upgrade image of WLC

Hi,
I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
7.0.116.0 (default)
7.0.98.218 (active)
so i reload the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
7.0.116.0 (default)(active)
7.0.98.218
So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

Sunil,
When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap: < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
Hope this helps.

Fix for iPhoto after upgrading to Yosemite

After upgrading to Yosemite I was unable to open iPhoto. I moved it to Trash (do NOT empty trash after moving it here!!!) - then go to App Store and download iPhoto. You'll want to make sure you then go to your Finder and click on the iPhoto download app in order to complete the download. When you open iPhoto it may say you need to upgrade - go ahead and do so then your photos will appear again with a new icon in your dock (remove the old one since it won't work now - the new icon will look different if you had an older version of iPhoto).
Hope this helps!

Ok so here's what you gonna do. (had this problem myself today, and after some fiddling figured out what to do.)
Find your old iPhoto with a cross through it, right-click it and select 'show package contents'. A folder will open. In that folder go to Contents>MacOS and there will be three little things there. Click on the one called 'iPhoto' and terminal will open. Leave terminal open and wait four seconds and VOILA! iPhoto opens. Leave terminal open until you are finished with iPhoto, because if you close terminal, iPhoto will close with it. THX! ENJOY! Hope it works.
P.S.
You can close terminal once you close iPhoto. I also suggest backing up your iPhoto library while you can.

IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
Appearing following way
UI_APPR_XML_PROVISIONER_EMPTY_TABLE
UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
Any help on this will be appreciated.

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

Customer invoices are blocked for dunning automatically when we run F150

HI All
when we are running the dunning (T.Code F150) for one of the customer invoice items are blocking for dunning automatically.
the customer master setting for dunning block fields is empty and there is no changes for this field.
These invoices are created recently and could please help to find a solution for not happened the same in hte next dunning runs?
thanks in advance
Best regards
Venu

Hi,
Customer automatically gets blocked if the Customer has NO Line Items which can be considered for Dunning.
Before running the Dunning check weather the customer master us updated with DUNNING Variant and also check for the weather the Line items are over due and if so check the Dunning Procedure for Dunning INTERVAL and also the Arrear Days for each Internal.
Hope this will Help you .
Thanks
Goutam

Still have no access for Assets after upgrading to Single App ...

CC Windows, OS: Windows 7 x64 Build: 6.b7601
Signed up for Photography program like a month ago. While I was trying to access Assets for use in Photoshop I was warned by a dialog about limited access, and I have to subscribe for CC Complete or Single App membership. Today, I have decided to go for Single App. Membership w/ Acrobat and subscribed for this programme but still there is no access ... Can you please fix this ...

Are you sure, you are working for Adobe ? ...
As I said before ... I have just upgraded my subscription from Photography to Single App. for ONLY assets access (Not acrobat subscription ... Single app subscription) ... Whatever; here is the description for assets feature from Adobe website -- Creative Cloud Help | Creative Cloud Market
"To download and use Creative Cloud Market content, upgrade to either Creative Cloud Single App or Complete plans."
and that was why I upgraded my subscription to Single App. In the end Single App is Single App; Acrobat or Illustrator. Whatever ... I am just trying to tell your subscription system fails, or at least single-app acrobat users are not being taken into consideration as single-app subscribers. I know it is reasonable purchasing Illustrator or InDesign for assets access, but there is nothing mentioned about having Acrobat as single app would not allow to use assets feature.
So this is what happens;
* I bought PS and Lightroom ( Photography )
* I tried to download assets, but CC desktop app told me to upgrade my subscription to Single App or Full Membership to use them.
* I followed the link to upgrade my plan.
* I upgraded my plan to Single App. (Acrobat) ... Or whatever, just get it ... title of the software should not be the case, at least according to Adobe.
* Returned back to CC desktop App. to reach assets.
* Still no access ...
* Still same warning to upgrade my plan which should be upgraded in step 4 !
* 3 Weeks ...
* Still same ...

Custom metadata properties give no results after upgrade from 2010

Hi,
Although I see my custom managed properties in my Search Schema in Central Admin, I am unable to find results using them e.g. 'VendorName:Marcel'. I have tried changing the column value in a document and performed a full crawl, but still no results. General
searches such as 'Marcel' work fine and even something like 'author:marcel' (which is a built in managed property) works too. What am I missing? How can I determine the issue? Nothing stands out in the ULS logs.
Background:
I recently upgraded my managed metadata service and search service from 2010 to 2013.
I then upgraded the content db holding my root site collection, and had to re-create my search service proxy to get searches to work. I then upgraded the content db which holds my content hub site collection. This includes site columns, many of which
are also Managed Properties.
Crawls are running with 8 errors - none of which are for the document I changed. Warnings are mainly about 'png' files.
In 2010 I had scopes, which I no longer see in Central Admin. Although I have converted the content database without error, I have not converted the Site Collection to 2013 yet.
macrel

I had to set each metadata property 'queryable' property and then run a full crawl after which the results were returned. I am surprised that this did not come over from the upgrade of the search service.
macrel

Custom nodes are deleted for IMG after upgrade

Similar Messages

Maybe you are looking for