Custom object in work flow not opening in CRM webclient ui

Hi,
I have designed a workflow in SAP Ecc 6.0 CRM.
There are some work items and a single custom popup screen in this workflow.
This popup screen is used to get data and pass to the subsequent workitem.
This screen opens in SAP CRM in the workflow inbox (SBWP) , and works as expected.
Also, mails are sent to the SAP user IDs of the concerned people through the workflow (as per process).
At this stage, we have done all settings reqd in SWU3.
However, when this entire workflow process is trigerred using the CRM WEBCLIENT UI, the following problems occur:
1) There are no mails received at any stage in the workflow inbox.
2) When the work item for the popup screen appears in the WebUI workflow inbox, and it is clicked, there is an error.
"Associated object cannot be opened. Contact your system administrator"
So, the customised pop-up does not open in this CRM WEBUI workflow inbox at all.
Question:
1) How do we ensure that the mails are received in the CRM WEBUI workflow inbox? Are there any settings to be done for that?
2) How can we make the custom popup open in the CRM WEBUI workflow inbox?
Regards,
Sachin

Hi,
Please check IMG path.
The path CRM->Basic functions->Worklists->Define Alert Inbox and Workflow Inbox->Define Object-Specific Navigation
Input like
BOR   Your_Object   Your_Method  BT_XXX  OPEN
Hope it work.
Deripmav

Similar Messages

  • Custom object in work flow not opening in CRM webui

    Hi,
    I have designed a workflow in SAP Ecc 6.0 CRM.
    There are some work items and a single custom popup screen in this workflow.
    This popup screen is used to get data and pass to the subsequent workitem.
    This screen opens in SAP CRM in the workflow inbox (SBWP) , and works as expected.
    Also, mails are sent to the SAP user IDs of the concerned people through the workflow (as per process).
    At this stage, we have done all settings  reqd in SWU3.
    However, when this entire workflow process is trigerred using the CRM WEBUI, the following problems occur:
    1)  There are no mails received at any stage in the workflow inbox.
    2)  When the  work item for the popup screen appears in the WebUI workflow inbox, and it is clicked, there is an error.
    "Associated object cannot be opened. Contact your system administrator"
    So, the customised pop-up does not open in this CRM WEBUI workflow inbox at all.
    Question:
    1) How do we ensure that the mails are received in the CRM WEBUI workflow inbox? Are there any settings to be done for that?
    2) How can we make the custom popup open in the CRM WEBUI workflow inbox?
    Regards,
    Sachin

    Hi,
    Please check IMG path.
    The path CRM->Basic functions->Worklists->Define Alert Inbox and Workflow Inbox->Define Object-Specific Navigation
    Input like
    BOR   Your_Object   Your_Method  BT_XXX  OPEN
    Hope it work.
    Deripmav

  • Navigation Bar & Work areas not appearing in CRM Webclient User Interface.

    Dear all,
    We are into SAP CRM 6.0 implementation. I have created a new Business role (ZIC_Agent) copying the standard one IC_Agent
    I have assigned default layout profile, role key and the assigned navigation bar profile is ZIC_Agent, which is copied form standard navigation bar profile (IC_Agent).
    I have assigned the role to a Org unit in the Organization Model.
    But when I try to execute the Webclient UI, it is not showing the Navigation bar and work area in the screen, whereas it is working absolutely fine with another standard business role (Servicepro) which has already been assigned in the system.
    I could not understand that, why I am getting this error.
    I request you to help me in resolving the issue. Your suggestions will be highly appreciated.
    Best regards
    Edited by: Raghu Ram on Feb 25, 2009 7:43 AM

    Hi Raghu Ram,
    To do a quick testing if the business role is working properly, assign it to your user directly in transaction SU01.
    Add parameter CRM_UI_PROFILE in SU01 for your user and give your Zbusiness role in the value (all caps).
    If this is still not working, check the pfcg role that is assigned to the Business role and regenerate the authorizations. You can do this in transaction PFCG.
    This should solve your problem.
    Regards,
    Padma

  • Getting status as ERROR while instantiating Business Object in work flow?

    Hi,
    Getting status as ERROR while instantiating Business Object in work flow.
    How to rectify it.
    Tahnks in Advance.
    Moderator message: please have a look at the dedicated Workflow forum on SCN.
    Edited by: Thomas Zloch on Jan 19, 2012

    Hi,
    Go to SWDD and create a new workflow. This workflow will have two steps. This is just for test purpose so we are not going to define any triggering event etc.  First step will instantiate (creating a runtime object) a business object and second step will use that runtime object to execute one of its method. We know that to instantiate any BO we need the object key to be passed. Key uniquely identifies a runtime instance of Business Object (henceforth we will refer it as BO or business object interchangeably). 
    use Business Object SYSTEM and method GENERICINSTANTIATE to instantiate any Business Object in workflow

  • Informatica work flow not connecting to integration service

    Hi I am OBIEE admin, i am having the following error when i am trying to run workflow manually.
    Informatica work flow not connectied to integration service,
    Pls help me asap

    Do this:
    Open Workflow manager or If it is already opened...then disconnect all the folders...
    1. Click on the folder you want to connect
    2. Go to 'Service' tab and select "Assign Integration Service"
    3. This will open "Assign Integration Service" window from where you can choose the Integration Service and can assign the workflows or all workflows. Click "Assign" button to assign the selected Integration Service.
    Now connect to the folder and you can run the workflows.
    Hope this helps and please mark if it does. :)

  • Object "2DObj1_Curve1" unknown or not open Error

    In 8.1, I used:
    Call GRAPHObjOpen("2DAxis1")
    Call GRAPHObjOpen("2DObj1_Curve1")
    D2CCHNX ="Time"
    D2CCHNY ="A010"
    D2CAXISPAIRNO =1
    D2CCURVETYPE ="Line"
    D2CURVECOLOR ="black"
    D2CURVECOLORRGB =33554432
    Call GRAPHObjClose("2DObj1_Curve1")
    Call GRAPHObjClose("2DAxis1")
    To modify curves within a report object From a VBS script.
    In 9.0, when I try this, I get an error that reads
    (Object �2DObj1_Curve1� Unknown or not open�)
    Has the 2DObj naming convention changed and if so
    What are the new rules?
    Is there a �What�s different between DIAdem 8.1 and 9.0� download I can read to get up to speed?

    Hi,
    I've done some tests. I've created a Layout in 8.1 and used a script to add the channel pairs to the axis system but, on my PC this works fine in DIAdem 9 too.
    Please send me a small example so that I can reproduce the problem. My email address is: [email protected]
    Greetings
    Walter

  • I have ipad with IOS 7,  Some apps doesn' t work, safari not open some web site. What can I do?

    I have ipad with IOS 7,  Some apps doesn' t work, safari not open some web site. What can I do?

    Try this and see if it helps.
    Settings>Safari>Clear cookies and data.
    Now close Safari completely. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then "swipe up" or "drag up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Event linakge for PO work flow not transporting to Qualty system

    This is Sudhakar ,
    I have a problem in Event linkage for PO Release strategy work flow.
    I have created a work flow for PO release strategy and done the event linkage through SWETYPV transaction code.
    I have added a new entry in SWETYPV transaction code and tick the 'Linkage Activated' check box. I have done this in development server. When I saved it prompted for a request and I have saved this Under the request( Customize request).
    When I create the purchase Order  for the first time the work flow is getting triggered. When I run the second time its not triggering.
    If I observe the reason is 'Linkage Activated' check box  is getting unchecked  when I create the PO. If I check it again it is asking for a request again.But after next run the linkage is again deactivated.
    Can you please help why this is happening.
    I have created another request in Customize client and transported first the development client, next the customise client request. When I observe in quality system an entry is created in SWETYPV transaction code for my work flow but 'Linkage Activated' check box is not checked.
    How to transport 'Linkage Activated' check box  to quality.
    This is an urgent one. Any body please help me
    Thanks
    Sudhakar

    Hi Imthiaz,
    What you said is correct. Its throwing one error in event trace
    Feedback after error - The message is.
    The mandatory input parameters of the workflow must be set.
    I think I am missing some input parameters.
    One more queation, I had transported this already to Quality
    But the linkage activation flag is not moved.  What could be the reason.
    Thanks
    Sudhakar

  • CreateListItem Action at work flow not trigger Event reciever

     
      Hello ,
    I have two Lists (List1 , List2).
    I have attached Workflow by SharePoint designer to List 1 .
    I have attached event receiver (Item was added) to list 2 .
    In the workflow . I use "CreateListItem"  to create new item in list 2.
    I have test the work flow . The item is added in List 2 , but the Event receiver not triggered .
    if I Create new item in List2 from browser , the event receiver is triggered.
         so  why  "CreateListItem" action not triggered event receiver ?
        Thanks
    ASk

    Hi himo,
    I made a test in my environment and when I start workflow in List1, then the event receiver in List2 is Triggered.
    Here are my test steps:
    1. Create a workflow for List1 in SharePoint Designer using CreateListItem action set the Title field to "Test" which is in List2.
    2. Create an event receiver for List2 with the below code
    public override void ItemAdded(SPItemEventProperties properties)
    string siteUrl = "http://sp2013sps/sites/testdevsite";
    ClientContext clientContext = new ClientContext(siteUrl);
    List oList = clientContext.Web.Lists.GetByTitle("List2");
    ListItem oListItem = oList.GetItemById(1);
    oListItem["Title"] = "My Updated Title.";
    oListItem.Update();
    clientContext.ExecuteQuery();
    base.ItemAdded(properties);
    3. Deploy the event receiver.
    4. When I execute the workflow in List1, then the title field in List2 will be updated to "My Updated Title". The event receiver has been triggered.
    I suggest you recreate a new List and follow the steps to above to check whether it works.
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Trouble shooting for work flow not getting triggered

    Hi everyone,
    I am doin a work flow for which the zfipp-> created event is the trigeering event.
    I parked a document using FB03,but still the workflow is not geeting trigered.
    I checked SWEL ,i see that the event is trigered.
    Also whe i simulate the event using SWU0
    I see that the workflow triggeres then.
    Any advice where the problem could be..
    regards,
    Aditya

    Hi,
    Have u done the event linkaga?
    If not goto SWE2  and do the event linkage.
    Thanks and Regards

  • Camera not working, shutter not open

    Hello, I need help, my camera does not work, the shutter does not open, and then restart your computer and restore settings but still not working, thank you provide me a solution, thanks.

    Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Custom object class attributes are not provisioning in oID thru OIM

    Hi,
    I have connected OIM with oID user provisioning is also taking place. I have made one custom structure class with some attributes in OID.
    In form designer,in OID usr form i have made feild UD_OID_USR_Custom
    In OId .config lookup i have mentioned that custom class as well as attributes of class[in code Custom in decode name of attribute at target]
    In process form recon mapping of OID i mapped this feild name .
    Also in resource object recon mapping also i mentioned this attribute.
    But while creating user till process form value of attribute is populating and not provisiong that attribute in OID.
    Please tell me where i went wrong or exact steps of mapping in form designer,Process definition,Lookup.OID.configuration,Resource objects.
    Thanks

    process form recon mapping of OID i mapped this feild nameHave you made attribute entry in Provisioning Lookup AttrName.Prov.Map.OID ?
    Have you followed each step :
    http://download.oracle.com/docs/cd/E11223_01/doc.904/e10436/extnd_func.htm#CACICHDH

  • Firefox quit working will not open any websites at all. Bookmarks and Menu are gone too.

    Mozilla was updating itself and zonealarm wanted me to allow it while I was in middle of a online school test question so I clicked deny just to try and finish the test. This did nothing but keep opening the zonealarm window to see if the update could be done, which I finally did but now mozilla is not working on any websites and i've uninstalled it and reinstalled it and also added the update settings but its not working. passwords and now im basically locked out of them.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up
    *http://kb.mozillazine.org/Error_loading_websites

  • Downloaded different versions none work. will not open vista64

    a few months ago fine then I don't know what caused it but now FF won't open. Uninstalled,tried different versions and still. using vista 64. Please help I love FF. I uninstalled any program that I thought had a slight chance of affection FF. no results. Last option is to reformat drive and start over.I miss my fox.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • UAR work flow not work

    Dear Experts,
             For the process User access review, I had done following configaration:
    1)Upload all neccessary .xml file into CUP,
    2) Create workflow initiator, stage and path
    3) I use Admin review process in option panel
    the problem is after I schedule the UAR load job from ERM, the request has been generated in "Admin Review" but not appear in
    reivewer's workplace after run update workflow background job.
    can someone advise?
    thanks!

    Hi Fang,
    Hope you have configured UAR functionality as defined in the accelerator "Access Control 5.3 User Access Review".
    If you haven't reviewed the document, following is the link and make sure all config. steps are inorder.
    http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/b05010a3-ed45-2c10-79b2-96df60a6bf2b?quicklink=index&overridelayout=true
    If you still facing the issue after verification, please open a message with SAP, so that GRC support can logon to your system and identify the issue.
    Best Regards,
    Sirish Gullapalli.

Maybe you are looking for