Custom objects in activity

Hello all,
I configured the screen for activity with relation a custom object 1, the custom object I can read, insert, edit ... with no problem the record, but I think that not real relation into record of custom object and record of activity.
with a report from custom object if link with activiity no data found, if no link with activity the data from custom object is show.
I need configure any more ?, or is not automatic the relation.
thank's

Mani J wrote:
Have you added new picklist field/value today? If yes you will have to wait till tomorrow.
-Check your Related Info access profile settings for Activity and CO.not i don't added anything, and today I have the same problem
the level access from Activity & CO 1 is full access.
thank's for your interest.

Similar Messages

Linking a custom object to an activity and importing records

I'm trying to create a link between an activity record and a custom object record. In essence, we will have 1 activity record with multiple associated custom object records linked to it. How do I import these multiple records to a specific activity record? I thought I could use the Activity: External Unique ID field but that field does not appear on the list of values available for importing to a custom object. Anyone have any ideas how to do this?

Ken, at this time the import wizard does not support this type of functionality. However, this could be done using web services.

Report on activities linked to custom object

Hi,
Is there a way show on a report each activity linked to a custom object record? e.g.
Custom Object name 1 , Activity 1 subject
Custom Object name 1 , Activity 2 subject
Custom Object name 1 , Activity 3 subject
When i use the Custom Object 1 reporting area i add the custom object "name" feild to my report then add "Activity Subject". Each custom object record can have many activity records, however when I run my report it says "No Results" despite there being data set up?
I tried a similar report but instead of showing activities i tried accounts, of which there are a number linked to a single custom object record. When i ran the report it showed a single row for each custom object record, almost as though it was a one to one realtionship between custom object and account, rather than a one to many?
Any thoughts on what might be going wrong? or how i can report on activities per custom object record?
Thanks

Using CO and account subject area, it should be possible to show M:M associations between CO and Account.
But for CO and activity, reporting on M:1 association alone is possible using CO subject areas.

Question for making Report of Custom Object(01)

We use Custom Object 01 for Comment under the Calendar(Activity) Screen.
- Objective :
1. We want to manage Comment that are made by Manager after closing Sales Activity
2. But, we can't manage Comment history in Calendar(Activity) Details because it is remained Last Comment in Details
3. So, we use Custom Object 01 for Comment
- Problem & Question :
1. We can manage Comment history under Calendar(Activity) Screen
2. But, we can't make Report Comment Report related with Account, Contact
3. So, we want to know
a. Are there no relationship Custom Object 01(Comment) with Account, Contact in Calendar(Activity) Screen
b. If we have to make Comment Report related with Account, Contact, how to make it?
Please let me know about that issue.... Thank You!!!

Your question is not clear. Do you want CO 1 to be related to Account, Contact and Activity? Or not? And what exactly is the reporting question?
Custom Object 1 is available for Real-Time reports. The Custom Object 1 subject area allows you to report on CO along with the related Accounts, Activities, Contacts, Leads, Opportunities, and Service Requests.

Related information - custom object 1

On Custom object 1, I have a related information tab. There you can add records from this Custom object to others on the same object. (entity name is contracts, in the company there are parent contracts and child contracts). At the moment I can link one (child-)contract to another, but it will only show this on the contract you have actively added the other record to.
How can I arrange that the newly added related contract is automatically added on the other contract as well? Thanks in advance!

You need something similar to Account Partners, where you can set the reverse relationship. This is not configurable. Contact Customer Care and create an enhancement request.

Implementing Data Search for Custom Objects

Can any one have some information on implementing search criteria for custom objects.
I am looking to modify the drop down values and search criteria based on custom data model.

Hello Rajesh,
The following configuration activity might resolve your query.
Transaction: mdgimg.
General Settings> UI Modelling> Define Field Properties for UI. Select your custom data model and go to "Hide Field Names."
For the fields of the entity type, you don't want to come up in the search UI, check on "No selection".
"No Selection" : These wouldn't come up as search Criteria. "No Results List": These won't come up in final result list.
Best regards,
Shephalika.

Methods to transfer Customer objects while Upgrading.

Hi,
What are the possible methods of transferring Customer objects/programs etc while upgrading from 4.6 to 4.7 or ECC ?
Any information will be helpful.
Thanks,
sAmik.

Hi Rekha,
After the Basis team have done with the Prepare activities , we need to RUN the SPDD transcations which provides the details of SAP Std DDIC objects that have been modified by the CLient It team. You will requuire take a deceiosn to keep the changed format or revert back to the SAP std structure. More often the decison would be to keep the changes format in the new version also. It is mandatory to complete this cativity so that you do not run the risk of any data loss in the new version of SAP.
After completeing the SPDD activity , we need have choice of taking the SPAU transcation to get the list of the STD SAP programs that have been modified. This activities can be done in phases even after the upgrade o fthe box. generally it is done in the same go so that your testing results are consistent and have more confidence in upgrade.
Then we need o move with the corrections of the Z/Y objects for sytax . Once we have complted these three ABAP workbench corrections cativities we need to get into a testing activity.
Hope this helps.
Anand

Steps in BI Content Objects Install & Activation

Hi
We are planning to activate new Business Content Objects (Info objects, Cubes, DSO, Datasources...etc) in our BI 7.0 System
Our BI System already got objects that are customized and in use.
What are the pre activation steps I need to perform to see the impacted objects before activation?
Ex:Lets say 0PROFIT_CETER is an Object that is available in the new BI Content activation objects
But 0PROFIT_CETER is already activated and customized (z attributes) in our systems so if I activate & install it again its going to overwrite everything
So how can we avoid these kind of things
Thanks

Hi Maxicosi,
As you are planning to activate new business content objects in BI system,
1) the first step would be to identify all the objects those are customized and those probably have chances to get overwritten during the business content installation
2) Installing business content is a very careful task if already an active version of objects are available in the system especially those which are customized, plus identify the objects that are required by the business only those can be installed if needed
3) Tcode: RSORBCT , Under grouping you might have to select "Only Necessary Objects" if you know all the objects that you would want to install, else you have to take it step by step, first select " In Data Flow Before" and select the "Info Area" that you would wan to install
4) Keep the Collection mode "Collect Automatically"
5) Make sure the source system assignment is been maintained
6) Once all the objects are populated you might have to drill down to each and every last level to make sure what you are about to install
7) you would find some existing objects which would show a green signal that they have already been installed so you would have to also select "Match (X) or Copy"
8) After finishing the selection its recommended to simulate the installation you would find the option under "Install"
9) Simulation would provide all the detail log of what objects are existing and about to be changed and predict any errors so that you can make sure you do the necessary changes
10) Then once you are sure that every thing is been verified you can install the Business Content in Background and monitor the job.
Hope this information would be helpful.
Regards
Pavan
Edited by: pavan yadav on Jan 18, 2011 2:58 PM

Unable to set up the default value in custom object 10,related item section

Hi,
Please help me out for the below issue
Custom Object 10 we renamed to Quarterly Broker Review .In Quarterly Broker Review there is a related item section 'Activity'.
In Quarterly Broker Review ,Activity related Section ,After clicking on The 'New Task' button 'Account Name' field in Quarterly Broker Review(Parent ) should be prefilled in the Activity Section(Related Item Section) in Account Name Field
'Account Name' field is a Picklist Read Only field.
Since it is a picklist read only field i couldn't write the expression in the 'Activity' Related section under 'Account Name' field
you can also help me by reaching at '[email protected]'
Thanks,
Srinivas Merugu

Hi Srinivas,
As you know, you can refer to a field in a different object by using JoinFieldValue function. But this function is not available for all the object references. If you refer online help for JoinFieldValue function you would notice that from activity only CustomObjects 1,2 an 3 can be referenced using this function.
If this is possible for the activity and CustomObject 10 then you go to the field named Account Id in Activity object and set a default value. I guess in the parent object "CustomObject10" Account Id will also be stored in "Account: Integration ID". So this field value can be copied into the Account Id field of Activity.
Instead you could write a web service program to achieve this.
Thanks
Naren

Action Link to link Custom Object 3 to Task

Hello,
Im creating a weblink on the task screen that runs a report on Custom Object 3 wtihin a new windows for the user to select the option on the report that the user would like to add. How can i create a action link that when selected will pass the selection on the report back to the activity screen?
Or can i create a weblink on the account record that will run a report then on the results depending on the row create a task linking Custom Object three and Accounts Automatically
Any suggestions would be approcaited

Thanks Shilei,
There is what i have been able to create so far:
https://secure-ausomxXXX.crmondemand.com/OnDemand/user/ApptNew?OMCR0=AXXX-90ZIJC&OMTGT=ApptEditForm&OMTHD=ActivityNewNav&OMCBO=OnDemand+Custom+Object+3&OMRET0=CustomObj3Detail%3fCustObj3DetailForm.Id%3dAXXX-90ZIJC%26ocTitle%3dASAHI+BOM%26OMTGT%3dCustObj3DetailForm%26OMTHD%3dCustomObject3DetailNav%26ocEdit%3dY%26OCTYPE%3d%26ocTitleField%3dName&OCNOEDITTYPE=Y&OCTYPE=
But how do i also link this to an account and default the Subject?

Kindly validate - Solution for Transportation of ABAP custom objects

The requirement is - We have to move the custom Objects (Programs, Reports, forms , tables etc..) from SAP 4.7 to ECC 6.0, which are two different servers as such.
For this activity, Using Solution Manager, by establishing landscape/system connectivity between SAP 4.7 and ECC 6.0 servers and then transporting the requests for all the ABAB custom objects from 4.7 to ECC 6.0 should be possible.
Experts kindly validate the above solution.
U r valuable comments will be highly appreciated.
Thanks & Regards,
Banu

issue resolved

Custom Objects

Hi,
I have created a custom object and dragged it to the Custom Object Library. When I am on my disconnected designer, am able to use it.
But, I want let other use it.
Please tell me how do I export the custom object from the designer and import the custom object into the Livecycle workbench ES2 resources.
Thanks and Regards,
Sonika

We are working to create a portlet that will integrate with the Crystal Enterprise reporting engine from Business Objects. The difficultly here is the authentication and authorization. Crystal can tie into Active Directory for authentication and authorization, but not the plumtree portal. We need the integration to work properly for all users in plumtree, whether they come from AD or not. As such, we need to build some type of custom authentication and authorization capabilities into our portlet.
Nonetheless, we plan to make as much use as possible with what is already provided. So our plan is to create a set of SQL tables that will tie together a crystal report with a list of groups in plumtree and define what rights those particular plumtree groups have on the report.
The reason I was interested in creating custom objects is as follows: If I could create a "crystal report" object in our plumtree portal, I would then have to do NO coding to allow administrators in plumtree to assign permissions for particular groups to those "crystal report" objects. My portlet would do a simple query of what "crystal report" objects the current user has access to and display them, and allow the user to interact with them. As it is, we are planning to create interfaces for adding and removing groups to a report, and giving those groups various levels of access to the reports.
Thanks for asking.

M:1 or M:M subject areas - Custom Object 01~03 and Activities

Please let me know when will be possible associated Custom Object 01~03 with Activities.
Is it possible in COD R17?

Thank you for your reply.
It may be seen as if all subject areas - Custom Object 01~03 and Activities - are associated with M:1 or M:M Relationship.
But after trying to analyse by COD BI Answer, I found it is 1:1 relationship not M:1 or M:M Relationship
In Oracle CRM On Demand Release 16 Transfer of Information New Custom Objects Analytics Functional Overview,
"M:1 or M:M subject areas, such as CO1 and Opportunities, are simpler to use, but require specific subject areas for each M:M association.
We only have subject areas to cover the association with Account, Contact, Opportunity, and SRs.
But we have customers who need the association to other objects, such Activities, etc…"
Please tell me about your method or knowhow. In below, It is a thing that I want.
- Objective
1. I use Custom Object 01 for Comment under the Calendar(Activity) Screen
2. I want to manage Comment that are made by Manager after closing Sales Activity
3. But, I can't manage Comment history in Calendar(Activity) Details because it is remained Last Comment in Details
4. So, I use Custom Object 01 for Comment
- Problem & Question
1. I can manage Comment history under Calendar(Activity) Screen
2. But, I can't make Report Comment Report related with Account, Contact
3. So, I want to know
a. Are there no relationship Custom Object 01(Comment) with Account, Contact in Calendar(Activity) Screen
b. If I have to make Comment Report related with Account, Contact, how to make it?

Powershell Custom Object Support

is there a way to pass a powershell custom object created in a .Net activity powershell snippet to another runbook without it being converted to a string? if not, are there plans to add this feature in the future?
e.g
$obj = New-Object PSObject
Add-Member -InputObject $obj -MemberType NoteProperty -Name customprop -Value "this is prop"
Add-Member -InputObject $obj -MemberType NoteProperty -Name Serial -Value "12345"

Hi,
in the "Run .Net Script" Activity you can define Date/Time, Integer, or String as output type of the custom Published Data, not PowerShell object.
That's up to the version System Center 2012 R2.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Label "Customer" shows in Activity Clipboard shows both Customer & Contact

In CRM 4.0 we were able to enhance this so contact record would show as 'contact' instead of 'customer' in the activity clipboard.
In 5.0 this seems harder to do. Have played with config & development but no luck so far.
Any thoughts on how to achieve? this is a B2B scenario.

on 7.0 now.

Custom objects in activity

Similar Messages

Maybe you are looking for