Custom Objects List Using ABAP Program
Hi Experts,
We have a requirement to collect all the custom objects(reports,smartforms,ddic objects etc)developed in ECC.
We need list basing on condition of 'last changed by' .
So for few objects we have 'last changed by' field and we are able to get the list but for few custom objects 'last changed by' field is not maintained.
Example for BTE there is no 'last changed by'...
Please suggest if any ideas.
Regards,
Rafi
Hi Rafi,
Do a source scan using RS_ABAP_SOURCE_SCAN for reports..Put Z* and give your respective conditions on last change field.
2.Check the Transport list to production you will get other details.
Hope it will be helpful for you.
Regards,
Kannan
Similar Messages
-
Synchronizing Two Custom Z Tables Using Abap Program
Hi,
My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish KumarHi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
extract the vendor types in to itab Table1New.
Select the vendor & types from Table2 by using the for all entries option (better performance).
loop at Table1New
check in Table2:
if the unique key is vendor no: check all fields for the vendor type from Table1New
if the unique key combo is vendor no & type: check by using a read table.
If not found => add entry to Table2
endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou -
Z*Programs - Custom Objects List
Hi,
I wanted to know if there is any standard SAP T-Code for listing all the Z*Programs (ABAP Custom Objects) with Frequency of Use, or Hihgly used order, number of time used etc.
We wanted to take out all the Z programs that are frequently used for the purpose of conversion/upgrade to mySAP ECC 5.0. We wanted to work on the highly used ABAP programs as the first priority.
Anybody with answer, will be hihgly appreciated.
Regards,
SubbuWhy don't u use a home made program ?
All info is stored in TADIR just select with this table with name like Z% or Y%...
That is my point of view...
report zlist.
tables : tadir.
select *
from tadir
where obj_name like 'Z%' or obj_name like 'Y%'
order by object.
write : / tadir-OBJECT , tadir-obj_name.
endselect. -
Regd using of lock object in an abap program
Hi all,
i have created an lock object but doesnot know how to use that lock object in an abap program. can anyone guide me how to use lock object in an abap program.check this sample for Production Order.
<b>* Lock request for order
call function 'ENQUEUE_ESORDER'
exporting
aufnr = p_aufnr
exceptions
foreign_lock = 1
system_failure = 2
others = 3
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.</b>
Regards
Prabhu -
How to list the abap programs order by updated date in ECD
Hi experts,
how to list the abap programs order by updated date in ECD?
thanks.I wrote a custom program for displaying Z* development work into an ALV report. 2500 character limit prevents me from posting, message me your email and I'll send you source code.
Edited by: Brad Gorlicki on Feb 18, 2010 11:25 PM -
Macro format to use ABAP Program
Hi,
I need to run an abap program based on certain condition and that is if the user selection is at particular level say at "Customer" level then that abap program should run else don't do anything and exit.
If "DetLevel" = customer then
ABAP program
else
exit
end if.
I am not able to put this in correct way it seems because if I am not at correct level then also the abap program is run.
Please help me to understand the way to achieve this.
Thanks,
PankajHi Awa,
It's regarding your questions..
Yes you can make it ..
You can create your data source program in your source system such as R/3, CRM, etc.
There is template function that can be used for your program:
RSAX_BIW_GET_DATA_SIMPLE.
You can use that template, and alter the code as your business requirement.
There are also blog, and tutorial as your references:
Generic Extraction via Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Hopefully it can help you a lot.
Regards,
Niel. -
Is it possible to reset password for any user using abap program
Hi friends,
Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
if any code for that to reset password please mail me.
Thanks & Regards,
YogeshHello Yogesh,
Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
=> Function Module - BAPI_USER_CHANGE
Call this in the program for resetting the password.
=> CALL TRANSACTION 'SU01' USING InternalTable
This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
Regards -
Fork in process chain using ABAP program
Hello everyone.
I need a fork in my chain. Depending on the values in some db table I will make a decision: do some process or skip and go further. The only solution I can see is using ABAP program. But unfortunately It doesn't return status. Any suggestion will be appreciated.Hi,
You have few process to run after the abap program. So make all those process as a different chain, and at the end of the ABAP program include a function module to trigger this chain, based on your condition.
If you like this idea, please revert for more information.
Hope this helps.
Thank you, -
Unzip files using ABAP program
Hi All,
Can anybody guide me how to Unzip a .zip file using ABAP program... Appreciate your immediate reply...
actually, my scenario is to check whether zip file is created in appl.server or not.., and if zip file created then i need to check whether its blank file or any content exist inside the file...
Thanks in advance
Bhaskerhi
good
parameters: command(236) lower case.
data: std_lines(255) occurs 0 with header line.
call function 'RFC_REMOTE_PIPE'
destination 'SERVER_EXEC'
exporting
command = command
read = 'X'
tables
pipedata = std_lines
exceptions
communication_failure = 1
system_failure = 2.
You should put your Unix command in the command parameter. "gunzip /yourfilepath/yourfilename" works on my Unix system. Once you determine the proper Unix command, you should be set. This technique is also nice because it provides you with echos back from Unix in table std_lines. For more complex Unix activity, you may want to consider throwing together a Unix script, and calling that via this code.
reward point if helpful.
thanks
mrutyun^ -
Access table using ABAP program in other database
Dear SAP Expert,
We have requirement that related to SAP interface.
Our SAP system run on Oracle database 11g (Unix).
Illustration: SAP system = A non SAP system = B
We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
What is the best practice for this interface
Do we need database link? If yes, please help to inform me the details step to configure it.
Thanks and RegardsHi Friend,
You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
else.
ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
Regards
S.Janagar -
How to print external file using ABAP program
Hello
I want to print an external file which is located in server (
20.99.0.18\GUI\xyz\8.0QUALITY\QM_TS.DOC) .....i want to print these kind of files(which i have retrieved from table 'DRAW' field 'filep' )......i need to print these files using ABAP program.
thank you
Vikram.
Message was edited by:
Vikram Bojjaextract the data and pass to script or smartform for printing
-
Can a transaction be called in background dynamically using ABAP program??
Hi Experts,
Can a transaction be called in background dynamically using ABAP program without BDC???
Regards,
Mansi.u can create job dynamically through programming..Try this sample code..
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return << Here it is a static call but u can make it dynamic
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif.
Regards,
JOy. -
HOW TO creat BAR CHART using ABAP Programming
DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJOn earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
DATANAME(15),
QUANTITY1 TYPE I,
QUANTITY2 TYPE I,
QUANTITY3 TYPE I,
END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
OPTION(20),
END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
COL1 = 'Jan'
COL2 = 'Feb'
COL3 = 'Mar'
TITL = 'Lumber Usage in $'
TABLES
DATA = ITAB_DATA
OPTS = ITAB_OPTIONS
EXCEPTIONS
OTHERS = 1.
[/code]
Regards,
Rich Heilman -
Urgent!! How to call a custom transaction or an ABAP program in BSP?
Urgent!! How to call a custom transaction or an ABAP program in BSP?
We are pretty new on BSP. Would be very appreciated if any expert here give us the detailed steps on how to build up the application to just call a custom transaction (e.g., t-code: ztest) or an ABAP program. Would we have to create a button or event handler to do that? And the detailed steps?
Thanks in advance and we will definately give you reward points!hi Durairaj,
During the time to wait for your answer, we copied Bernd's code from your last link, but when activating it, get the 1st error msg:
Field "CLIENT" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement."DATA" statement. The error shows up here:
<td>
<htmlb:inputField id = "client"
value = "<%= client %>" />
</td>
Then we added Client to the page attribute and define it as type String, then get another error:
The field "EVENT" is unknown, but there is a field with the similar name "EVENT_ID"."EVENT_ID". This error shows up at the beginning in the Event Handler:
OnInputProcessing:
code
event handler for checking and processing user input and
for defining navigation
event handler for data retrieval
event = cl_htmlb_manager=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
button_event ?= event.
How to resolve this unknown Event error, need to define in Page Attribute tab? but with what type?
Actually we only want to run an ABAP4 program in BSP, the code is complicated, could you show us an easy way of doing this in BSP? -
Name the infotypes we uplode using abap programs
Hi,
can anyboby let me know, Name the infotypes we uplode using abap programs?
ThanksIT0008
IT0045
IT0589 ETC
some of them can be made through LSMW also but we use BDC . the main reason is we wont find Feilds to upload those data in templates
Maybe you are looking for
-
Is there a way to save a photo I found on the Internet to my camera roll photos? Here is my dilemma, I control a company's Facebook page and like posting cool photos, however because the business is just one of my pages I cannot simply post it to Fac
-
I am running Photoshop elements 8 on windows 7 It has been fine for a very long time, Now when I boot it up it gives me the error 150:30 I have tried uninstalling and re installing to no avail. Can anyone help me get this resolved ? Thanks
-
Problem closing a Program (remains in status 'trying to end program')
After upgrading to OS Maverick, CrossOver issued an error message. Trying to finish the program didn't work, it continuous indicating it's trying to end it. Even after using the immediatly stopping function, it falls into the 'trying to end program'
-
Only Current Date showing when downloading to excel
<b>Hi, I have a query is attached to a template, when I download to excel it only downloads the current date. I have dates ranging from 2001-2006, and it downloads to excel it only downloads the current year of 2006. When I run this query on the SA
-
hi... i have a 2 swf, one is main.swf, and another one is load.swf, the load.swf height and width will be change dynamically but i have to load the load.swf into main.swf, with best fit the screen. how? my main.swf is 1000x780 and my load.swf more th