Custom Package for Data Source

Can we create custom enhancement package from stratch for any datasource.

If you are talking of package for putting your datasources on activation.
Yes you can.
You can create package in SE80 transaction.
Hope this helps.

Similar Messages

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

Delta enable custom func mod data source for Delete record also

Hi,
We have a custom function module data source and the base table on which data is extracted has two time stamp fields ( created on, changed on ) and the data source is delta enabled with the timestamp field.
It works aboslutely fine in Full and initial mode and load data into a target ODS.
Even in delta mode we believe that it works in most of the cases( only change of an existing records and creation of new records). However in the case of delete, we have issues. When the data is deleted from the base table we completely loose the record and cant advice the BW which one to delete.
In order to bypass this we have analyzed the cdhdr/cdpos table and found out that that we can compute the Key field value that was deleted from the last delta run and can include it as such in the data that are extracted.
Big Question is by what mechanism we let the BW know that this is a delete, so that the existing record( with the same key) is actually deleted from the ODS. I have seen some fields like 0RECORDMODE doing things in SAP delivered content. But not sure how we can get this work for our custom data source.
Please let us know whether you need any clarification on this. I shall be prompt to provide points who can resolved this showstopper issue for us.
Thanks

Hi Aruna,
I have tried to explain : "Big Question is by what mechanism we let the BW know that this is a delete"
Now to create a DataSource, you will have to include the information from the Tables as you mentioned:
1: CDHDR
2: CDPOS
In this table you can check the CHANG_ID as the field which gives the information of
1: Overwrite
2: Add
3: Delete
Now when you create the Function Module, make a field similar to this and read the R/3 Table field CHANGE_IND and pass the relevant Indicators to the BW in the Transfer Rules
Like
CDHDR refers 'D' for delete but In BW 'R' denotes Deleted image. So the FM should take care this and pass the blank for all and 'R' for the documents with 'D' for each line item along with the other required fields.You will have to use an ODS in this case.
note: Plz check the logic of Change Ind "E". I am not sure of this type.if you want to delete 'E' then pass the value as 'R' to the BW system for documents with 'E' CHANGE_IND.
Hopes i made it clear.
regards
Happy Tony
Points == Thanks

Error while activationg BI content for BI admin cockoit for data sources

Hi all,
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I have applied the sap note 1110642 , 1110641 . also ran the program RSSM_SHIPDVERS_CLEANUP but did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
Akash

First of all Rather than using SPRO to install Admin Cockpit, its better to install it from Business Content, else many of your existing InfoObjects would get overwritten and you would require to revert them back.
2ndly, check if these DataSources are available in your source system. While installing from Business Content, the system prompts to log in to source system interactively and would install the DataSources in teh source system if they are not there already.
Also check what versions are your Source Systems on. Older versions may not have the DataSources while the new concept of Admin Cockpit is available in BI7.0 which goes well with ECC.
Regards
Anujit Ghosh

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

User exit for data source 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Failed to close connection for data source "EntityDataSource"

Hi All,
I have deployed some PowerView reports on SharePoint 2013.
I have open it on sharepoint, wait for 5 mins & then I try to change any filter then I am getting following error as
Failed to close connection for data source "EntityDataSource"
Error Text:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsErrorClosingConnection</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorClosingConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<MoreInformation><Source></Source><Message>For more information about this error navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Is it because of Session Timeout?or may be something else
Thanks in advance.

Hi Rameshwar,
Pleaese help to collect SharePoint ULS Log related to this issue for further investigation, please see:
Configure and View SharePoint Log Files and Diagnostic Logging (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210652.aspx
In addition, could you please elaborate this issue with more deail how this issue happened? Are you encountered this issue while you view the Power View report on SharePoint site?
Regards,
Elvis Long
TechNet Community Support

Configurational settings for data source in BI server

Hi Sdns,
Where can we make configurational settings for data source in BI server.
Advance thanks to replies.
karun

Go to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

Connection verification failed for data source using mySQL

Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(ConnectionRunner. java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.

http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
HTH
Tim Carley
www.recfusion.com
[email protected]

Connection verification failed for data source:

Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java :589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(Connect ionRunner.java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.

Also make sure your firewall has the required port open (1433
default) and if you are running 2003 on the SQL box, especially if
you ran the security Wizard, make sure the IPSec is allowing the CF
box to communicate with it, and vise verse.

Delta field for Data Source 0BP_RELATIONS_ATTR

Hi Experts,
I need to know how to find which field is Delta enabled for standard Data Sources.
In my requrement for Data Source 0BP_RELATIONS_ATTR.
As the Data Source is being accessed by BODS sysetm and they need to know the Delta field to extract delta.
Thanks
Basheer

Hello,
Are you using Crystal Reports? If not I believe you should be posting your question to one of the Classic SAP forums:
http://forums.sdn.sap.com/index.jspa#45
Please mark as answered also.
Thank you
Don

Custom Package for Data Source

Similar Messages

Maybe you are looking for