Custom particle problem, transparency not showing in generated particles?

Using After Effects CS5 and Trapcode Particular:
I want to use a custom particle for the generated particles.
So I have imported a .gif image of a pollen grain, which have a transparent backround.
The transparency does not automagically show after the import, but I have found (via web) that I can
select the imported gif in After Effects and do the following:
Effects>Keying>Color Key and then use the eye dropper to key out the color I want to be transparent?
Then the imported image show transparency where it should (more or less), but the generated particles still show the white background instead of the newly added transparency... how do I make it so the transparency in the imported image, is visible in the generated particles?
I also probably want to get some better 3D look to the particles, so I'm considering buying a 3D model of a pollen grain.
What 3D fileformats are supported out of the box to be used with AE and Trapcode Particular and is there something in particular I should
aware of when buying such files?
 

how do I make it so the transparency in the imported image, is visible in the generated particles?
Pre-compose the keyed layer.
What 3D fileformats are supported out of the box to be used with AE and Trapcode Particular
There are none. Neither AE nor Particular support 3D geometry.
Mylenium

Similar Messages

  • My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time

    My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time

    When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
    You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

  • Custom scan box does not show scan button due to my 13" screen.  Can't reach it.  How do i fix?  Thx

    Custom scan box does not show scan button due to my 13" screen.  Can't reach it.  How do i fix?  Thx.

    Try increasing the resolution of your screen.

  • CUSTOM ICC PROFILES DO NOT SHOW UP IN PSCS 6 MAC OS 10.8.4 BUT ARE OK IN CS5

    The only icc profiles that show up in CS 6 Mac OS 10.8.4 are the ones that are installed from the printer driver ( Epson 9900 ) Any other single or custom profiles  do not show up when placed Library/Colorsync/Profiles
    All profiles show up in CS 5, There has been a lot of discussion of this on many forums with no solution. I have also tried installing the profiles in the contents folder of the Epson printer in the main library folder with no luck. Please advise

    Mac OS 10.8.4 is still in beta. You need to be reporting this to Apple.
    What happens if you move these profiles to the Adobe/Profiles folder, or the users/Library/Colorsync/Profiles folder?
    There has been a lot of discussion of this on many forums with no solution.
    What forums? A google search turns up nothing but this thread.
    I have not seen this problem with the released versions of 10.8.

  • Custom header name does not show in ALV...

    Hello Experts,
    I am using custom column names for my ALV display but when I display it does not show
    the title I specified. For example, one of my columns which is 'AMOUNT' has a custom name
    which is 'YTD AMOUNT'. But how come it still shows 'AMOUNT' in my header? I am using
    cl_salv_table for my ALV. Below is my code:
    TRY.
            cl_salv_table=>factory(
              EXPORTING
                list_display = 'X'
              IMPORTING
                r_salv_table = lcl_table
              CHANGING
                t_table      = gt_output ).
          CATCH cx_salv_msg.                                "#EC NO_HANDLER
        ENDTRY.
        lcl_functions = lcl_table->get_functions( ).
    *   Set all standard ALV functions
        lcl_functions->set_all( abap_true ).
        lcl_columns = lcl_table->get_columns( ).
        lcl_columns->set_optimize( abap_true ).
    *   Set display to striped pattern
        lcl_display = lcl_table->get_display_settings( ).
        lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
    */Set column names
        TRY.
            lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
            lcl_column->set_medium_text( text-h01 ).
            lcl_column->set_long_text( text-h01 ).
            lcl_column->set_output_length( '40' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'BUKRS' ).
            lcl_column->set_medium_text( text-h02 ).
            lcl_column->set_long_text( text-h02 ).
            lcl_column->set_output_length( '12' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'KHINR' ).
            lcl_column->set_medium_text( text-h03 ).
            lcl_column->set_long_text( text-h03 ).
            lcl_column->set_output_length( '17' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'KOSTL' ).
            lcl_column->set_medium_text( text-h04 ).
            lcl_column->set_long_text( text-h04 ).
            lcl_column->set_output_length( '10' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'AUART' ).
            lcl_column->set_medium_text( text-h05 ).
            lcl_column->set_long_text( text-h05 ).
            lcl_column->set_output_length( '04' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'KTEXT' ).
            lcl_column->set_medium_text( text-h06 ).
            lcl_column->set_long_text( text-h06 ).
            lcl_column->set_output_length( '20' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'AUFNR' ).
            lcl_column->set_medium_text( text-h07 ).
            lcl_column->set_long_text( text-h07 ).
            lcl_column->set_output_length( '12' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'ACTUAL' ).
            lcl_column->set_medium_text( text-h08 ).
            lcl_column->set_long_text( text-h08 ).
            lcl_column->set_output_length( '10' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'COMMIT' ).
            lcl_column->set_medium_text( text-h09 ).
            lcl_column->set_long_text( text-h09 ).
            lcl_column->set_output_length( '10' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'TOTAL' ).
            lcl_column->set_medium_text( text-h10 ).
            lcl_column->set_long_text( text-h10 ).
            lcl_column->set_output_length( '10' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'BUDGET' ).
            lcl_column->set_medium_text( text-h11 ).
            lcl_column->set_long_text( text-h11 ).
            lcl_column->set_output_length( '15' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'AMOUNT' ).
            lcl_column->set_medium_text( text-h12 ).
            lcl_column->set_long_text( text-h12 ).
            lcl_column->set_output_length( '15' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'AGE' ).
            lcl_column->set_medium_text( text-h13 ).
            lcl_column->set_long_text( text-h13 ).
            lcl_column->set_output_length( '15' ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
    */Set aggregations
        TRY.
            lcl_aggregations = lcl_table->get_aggregations( ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_aggregations->add_aggregation( 'ACTUAL' ).
          CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_aggregations->add_aggregation( 'COMMIT' ).
          CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_aggregations->add_aggregation( 'TOTAL' ).
          CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_aggregations->add_aggregation( 'BUDGET' ).
          CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_aggregations->add_aggregation( 'AMOUNT' ).
          CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_aggregations->add_aggregation( 'AGE' ).
          CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
        ENDTRY.
    */Hide columns
        TRY.
            lcl_column ?= lcl_columns->get_column( 'SETNAME' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'TXT' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'BUDAT1' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'COMMIT' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'ACTUAL' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'BUDAT2' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'ASTNR' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'AVAIL' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'CTRDIV' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        TRY.
            lcl_column ?= lcl_columns->get_column( 'CTRORD' ).
            lcl_column->set_visible( if_salv_c_bool_sap=>false ).
          CATCH cx_salv_not_found.                          "#EC NO_HANDLER
        ENDTRY.
        lcl_events2 = lcl_table->get_event( ).
        CREATE OBJECT lcl_handle_events.
        SET HANDLER lcl_handle_events->on_link_click  FOR lcl_events2.
        SET HANDLER lcl_handle_events->on_top_of_page FOR lcl_events2.
        lcl_display_settings = lcl_table->get_display_settings( ).
        lcl_table->display( ).
    Also, my top of page only display if use LIST display but when I use GRID, it does not show.

    Thanks anyways...

  • Custom Ribbon tab does not show in generic list

    Hi.
    I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
    Thanks!
    <Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
    <CustomAction
    Id=”Ribbon.MyTab”
    Title=”Adds a new Ribbon tab to Generic List”
    RegistrationType=”List”
    RegistrationId=”100″
    Location=”CommandUI.Ribbon.ListView”
    >
    <CommandUIExtension>
    <CommandUIDefinitions>
    <CommandUIDefinition
    Location=”Ribbon.Tabs._children”>
    <Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
    <Scaling Id=”Ribbon.MyTab.Scaling”>
    <MaxSize
    Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
    Sequence=”15″
    GroupId=”Ribbon.MyTab.MyGroup”
    Size=”LargeMedium”/>
    </Scaling>
    <Groups Id=”Ribbon.MyTab.Groups”>
    <Group
    Id=”Ribbon.MyTab.MyGroup”
    Sequence=”15″
    Description=”"
    Title=”My Group Name”
    Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
    <Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
    <Button
    Id=”Ribbon.MyTab.MyGroup.Button”
    Alt=”Ribbon.MyTab.MyGroup.Button”
    Command=”Ribbon.MyTab.MyGroup.Button_CMD”
    Image16by16=”/_layouts/images/siteIcon.png”
    Image32by32=”/_layouts/images/siteIcon.png”
    LabelText=”Button”
    Sequence=”10″
    TemplateAlias=”o1″
    ToolTipTitle=”Button”
    ToolTipDescription=”Shows a dialog” />
    </Controls>
    </Group>
    </Groups>
    </Tab>
    </CommandUIDefinition>
    <CommandUIDefinition
    Location=”Ribbon.Templates._children”>
    <GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
    <Layout Title=”LargeMedium”>
    <OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
    <OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
    </Layout>
    </GroupTemplate>
    </CommandUIDefinition>
    </CommandUIDefinitions>
    <CommandUIHandlers>
    <CommandUIHandler
    Command=”Ribbon.MyTab.MyGroup.Button_CMD”
    CommandAction=”javascript: alert('Hello World');” />
    </CommandUIHandlers>
    </CommandUIExtension>
    </CustomAction>
    </Elements>

    Hello,
    I was able to use your custom ribbon tab XML just fine.  The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not.  Anyway,
    after replacing those with straight quotes and fixing some other misc formatting, it worked fine.  I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file.  In SP, I created a new custom
    list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML.  Just look for red squiggles in the editor and fix them.
    Regards,
    - Kemp Brown [MSFT]

  • HTML Signature Problem - Images not showing

    Hi all,
    I've got some HTML signatures that I use in Mail (v4.3) on Snow Leopard (10.6.4). They were created quite a while ago and have been working fine. BUT... I need to update them to change some of the information. So, I went through the usual rigamarole:
    - Edit the HTML file
    - Open the HTML file in Safari (v5.0.2)
    - Save the file as a webarchive from Safari
    - Find the appropriate file in the ~/Library/Mail/Signatures folder
    - Replace the file with the new webarchive (renamed)
    When I do this, now, Mail will not show the image that I have in the signature (which is a background image placed in the file using CSS and referenced as a URL from my web server).
    Does anyone know why the old signature (created the same way, but using an old version of Mail & Safari) works... but doing it all over again using the current version doesn't?
    Thanks!

    Anything you paste in the HTML is your responsibility. iWeb doesn't care about it. If it doesn't work, too bad.
    Perhaps Posterous doesn't like to be displayed.
    Ask them.
    And instead of pasting garbage (not pretty stock standard) you may want to consider using proper code  :
    <iframe src="http://hamptoncycles.posterous.com/" frameborder="0" width="900" height="1050" scrolling="no" allowTransparency="true"></iframe
    You'll never now if that is the problem.

  • "FFB" Problem -Elements Not Showing

    I'm creating a site using the "Full Browser Method."
    I've gone through the forum & google before posting. I've
    also done Lee's tutorial at GoToLearn. It's great for tiling
    backgrounds.
    1.) What's the standard size for "FFB" I'm currently using
    1280x800. I'm using a image for my background what size should that
    be?
    2.) I've gotten my background to fill the browser but a lot
    of my elements are getting clipped. For example I drew a bar a the
    bottom of my stage and typed some text. When I go to publish the
    .html it doesn't show it gets clipped.
    3. My main objective is to load my "bg.swf" at level 0 using
    the "FFB" method, then my "content.swf" at level 1 and my
    "navigation.swf" at level 2. Do I need to have all my other "swf's
    be published with the "FFB" method or justt my main flash movie
    which is my "navigation.swf" How can I accomplish this. What will I
    need to do and where shall I place my actions scripts?
    I'm on a MAC intel using Flash 8 Pro. I have a basic
    understanding of AS2
    3.)

    bev4515 wrote:
    > I apologize if this is a repeated question, but I am so
    frustrated. I was
    > working on an existing website, that was working fine
    until I made a few
    > updates. The updates were made after I downloaded and
    installed the dreamweaver
    > 8.2 update. That's the only variation that I can think
    of. I was simply adding
    > 2 new flash elements to the page. One is a slideshow. On
    one of the pages, the
    > buttons were not even showing (which I also embedded
    with dreamweaver, I
    > created them in flash). This site has been up for 6
    months and I have never had
    > a problem making changes for the client. I can see the
    changes when I preview
    > them locally, but when the pages are uploaded, the swf's
    are not showing on the
    > page. If anyone can help, I would be forever greatful.
    When you insert Flash into a page using DW 8.2 it now creates
    a
    'scripts' file in your local site folder. You have to upload
    that
    'scripts' folder to your server, otherwise the Flash will not
    work.

  • Strange problem--tomcat not showing pages.....

    hi friends,
    Today morning-on i started encountering a strange problem of tomcat not showing the pages in the browser.
    When i startup the tomcat it starts up fine without any warnings or alert messages.
    But when i access the web pages/jsps that i want to view, it is showing a blank white page without any trail for me to findout what went wrong.
    And on analysis, i found out that catalina_log.2003-09-16.txt had the follwing error messages.
    2003-09-16 18:39:18 CoyoteAdapter An exception or error occurred in the container during the request processing
    java.lang.NoSuchMethodError: javax.servlet.http.HttpServletRequest.getUserPrincipal()Ljava/security/Principal;
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:455)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
         at java.lang.Thread.run(Thread.java:536)
    2003-09-16 18:43:22 CoyoteAdapter An exception or error occurred in the container during the request processing
    java.lang.NoSuchMethodError: javax.servlet.http.HttpServletRequest.getUserPrincipal()Ljava/security/Principal;
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:455)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
         at java.lang.Thread.run(Thread.java:536)
    Of course this is the message of a freshly installed server, as all the known tricks to show up the pages failed, i did for more than 4 times the reinstallation of tomcat.the version i am using is 4.1.24.I have already put the same server with apache on window OS in the production server.Now the testing is going on for the site.
    How can i make the tomcat work properly to show the pages smoothly.Any developer friend can please help me?
    thanks and regards
    sathiyam K G

    Hi friends!!
    I would like to know what is the problem with my tomcat server or environment,by that it is not showning the pages to me, in spite of not giving any errors at the server console.
    Pl refer to my first post for the problem.Since i narrated with the error message log, i am requesting you to refer to the same again.
    I am sorry that i do not have enough duke points to assign.Bear with me.
    sat

  • Custom Inserted HTTP Header not showing up in Iplanet Logs

    ALL:
    I have some iPlanet Enterprise/6.0 web servers sitting behind a LoadBalancer. The LoadBalancer is setup in an 'one-armed mode', and takes a client HTTP request passes it onto the server, but during this process, changes the client source IP to that of local static IP that the LoadBalancer has. Due to our setup we cannot change this.
    By changing the client source IP to a local address, we have lost any useful user session tracking that was done by source IP.
    To get around this, I have the LoadBalancer inserting an HTTP header with the client real source IP. Reading the NSAPI Programmer's Guide (Table 7-1 "http://docs.sun.com/source/816-5686-10/07_magnu.htm"), there is an option "%Req->headers.headername%" that can be used with 'flex-int' to log any header value.
    My output from snoop looks as follows:
    HTTP: ----- HyperText Transfer Protocol -----
    HTTP:
    HTTP: GET /plugin.do HTTP/1.1
    HTTP: OrigClientAddr:10.5.4.28
    HTTP: Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
    HTTP: Accept-Language: en-us
    HTTP: Accept-Encoding: gzip, deflate
    HTTP: User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
    HTTP:
    I have set the value to "%Req->headers.OrigClientAddr%" and it still does not show up in the log file. Any clues?
    Works fine in Apache with:
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{OrigClientAddr}i\" \"%{User-Agent}i\"" headerinsert
    CustomLog logs/access_log headerinsert

    Always nice to find resolution to one's own question.
    Fix was to change the header value to all lower case.
    From:
    "%Req->headers.OrigClientAddr%"
    To:
    "%Req->headers.origclientaddr%"

  • ICloud sync problems, documents not showing up

    I uploaded a few documents on to my iCloud drive from my Mac 1.
    I can see them from My Mac 1 and from iCloud.com but cannot from my other Macs.
    Documents were uploaded in the morning and am checking at night, still no signs.
    Is there a access or sync issue for showing documents across all your devices ?

    Ok got it to work. I went and created another folder just a dummy one on my Mac which was not showing it.
    And eureka it synced immediately and showed up all the docs.
    Sync bug !!!!!

  • ECC Customer Ship to party not showing in BP relationship in CRM

    Hello Experts,
    The sold-to party 1111 and ship-to 100 are downloaded to CRM 6.0 from ECC 6.0
    We have maintained this SHIP to PARTY - 100 for a sold-to party 1111 in ECC in the partner function tab in XD02. In this case BDoC got generatedin CRM, it is showing GREEN also, but still the ship-to 100 is not showing in the RELATIONSHIP button of BP - 1111 in CRM.
    Please advice what will be the reason? Any note, web blog , any specific settings to be checked?
    Regards

    Hi
    Yes, the BDoC type is BUPA_REL and it shows fully processed (showing in GREEN) in CRM system.
    But still the relationship (ship-to party) is not shown in RELATIONSHIP for BP in CRM.
    Any pointers?

  • "Let others send fax through this computer" - problem: modem not showing up

    I have a macbook that does not have an internal modem for faxing. I am using another networked mac in our office that has an internal modem for faxing. I have set up the printing and fax preferences to "let others send faxes through this computer" on the mac that can fax. It has worked in the past, but this morning when I went to fax from my macbook, I cannot see the modem in the mac that can fax. I have also checked with other macs in the office and they can't see it either. Network is okay, I can access the computer through connect to server, I have repaired permissions, restarted and still no modem showing up or shared printers showing up. I have not updated anything on the mac that can fax. Any ideas?

    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1801.html
    Strange, not sure why it's not showing up.
    Have you confirmed that the fax printer is working on the host Mac? Maybe try turning off the sharing and deleting the existing Fax Printer in the Fax List with /Applications/Utilities/Printer Setup Utility, and creating the Fax Printer again, and turn on sharing again.

  • Custom ribbon button does not show for a Tasks list

    I created a simple app using Visual Studio 2012 to add a custom ribbon button for a tasks list. After deploying the app to the SharePoint online, the button does not appear on the ribbon. The exact same button gets displayed properly
    when added to the ribbon for a custom list.  The elements file with the location of the button gets generated, so I can't imagine it would be wrong, but just in case, this is what I have:
    <CustomAction Location="CommandUI.Ribbon"....
    <CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">...
    Any help is greatly appreciated.
    One more thing, if I add this button using SharePoint Designer 2013, the button does not get displayed either. I have a feeling it might be problem with the Tasks list?
    Thanks

    Hi Danny,
    The button needs to be displayed only for one specific list. And as I mentioned, the elements file for the ribbon button was generated by VS, here is the content:
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomAction Id="02aa4c3b-bb73-4dfa-989c-d63a9591dcee.RibbonCustomAction" RegistrationType="List" RegistrationId="{$ListId:Lists/Projects;}" Location="CommandUI.Ribbon" Sequence="10001" Title="Create Project Site">
    <CommandUIExtension>
    <CommandUIDefinitions>
    <CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">
    <Button Id="Ribbon.ListItem.Actions.RibbonCustomActionButton" Alt="Create Project Site" Sequence="100" Command="Invoke_RibbonCustomActionButtonRequest" LabelText="Create Project Site" TemplateAlias="o1" Image32by32="_layouts/15/images/placeholder32x32.png" Image16by16="_layouts/15/images/placeholder16x16.png" />
    </CommandUIDefinition>
    </CommandUIDefinitions>
    <CommandUIHandlers>
    <CommandUIHandler Command="Invoke_RibbonCustomActionButtonRequest" CommandAction="~remoteAppUrl/Pages/Default.aspx?{StandardTokens}&SPListItemId={ItemId}&SPListId={ListId}"/>
    </CommandUIHandlers>
    </CommandUIExtension >
    </CustomAction>
    </Elements>
    If the same button is added for a custom (not a Tasks) list, the button shows up fine.
    Thanks

  • JPanel custom tooltips in JTree not showing

    Hi,
    I use a custom TreeCellRenderer in a JTree like
    MyTreeCellRenderer extends JPanel implements TreeCellRenderer
    The panel contains two JLabels, each with a different tooltip. Although I register the tree, the panel and the two labels with the tootipmanager, no tooltips are showing up. Any idea?
    Thanks,
    Ulrich

    I'll provide my own answer:
    As it currently stands Logic Apps require a "default" response to be defined in the swagger. This is not implemented by default by an API app out of the box, but can be done relatively easily by adding a Swagger OperationFilter.
    That is to say in the
    public void Apply(Operation operation, SchemaRegistry schemaRegistry, ApiDescription apiDescription)
    method of the filter you will need to ensure that the operation.responses dictionary contains an entry keyed with 'default'.
    Microsoft's provided connectors contain a reference to a "Microsoft.Azure.BizTalk.Adapters.SwaggerGenerator.dll" contains a OperationFilter that will do this for you if you don't want to write one yourself.
    Final note: Having spoken to MS about this issue it is currently under review and will hopefully be resolved in a future version of LogicApps so hopefully this will all disapear.
    Edit: Also see http://blogs.msdn.com/b/hosamshobak/archive/2015/03/31/logic-app-with-simple-api-app-with-inputs-and-outputs.aspx

Maybe you are looking for