Custom PD Infotype for TEM

Hi,
I need to create a custom infotype in TEM to capture course credits.
I am using tcode PPCI as my starting point. But unable to start the creation since I am getting a message that the structure HRInnnn does not exist.
Can someone tell me how to create this sructure?
Or has a step by step document on creating a custom PD infotype in ECC 6.0?
Please help.
Thanks.

Shivani,
Pl follow the steps indicated in the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/51c0814a1211d182b80000e829fbfe/frameset.htm">SAP help</a>.
~Suresh

Similar Messages

  • Custom HRP Infotype for e-Recruiting

    I am trying to create a custom HRP infotype to be used in our e-Recruiting system. I want to be able to update the infotype using the SAP standard RH_INSERT_INFTY and like function calls. However my entry in table t777d won't let me change the Update type to anything other than blank (No update via personnel planning update task). I also am having issues which I am not sure if this stems from that problem or not but when I try to use the RH_INSERT_INFTY I get a short dump when it tries to do an insert with a vtask of D because the data doesn't appear to be mapped to the correct fields. My input table type is of type p9xxx and it seems to be mapped correctly until the last stage when it actually tries to insert the line into the table. Any suggestions for what might be wrong? I have checked to make sure that the p9xxx and hrp9xxx have the same structure and they appear to match correctly

    You could search/post this question in the HR forum...

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • Creation of subtypes for a custom PD Infotype.

    HI Experts,
    We are in the process of creating a custom PD infotype (say 9003 and hrp9003 is the table).
    We want the infotype to have 2 subtypes (say 01 and 02).
    We followed the steps and created the infotypes and also made sure that we create 2 subtypes and we were successful till here.
    However, when we try to maintain data in IT9003(pp01), we never get an option to specify the subtype and hence whatever data we save doesnu2019t have any value in subtype field.
    Please help up out to save data with subtypes.
    We want something similar to infotype 1001, where we can select the relationship(subtype) and save accordingly.
    How to make the subtype appear in the data creation screen? Do we have to do some changes in the module pool program?
    Regards,
    Ravikeerthi.

    Check the tables V_778U.....assign your subtypes to custom PD Infotype.
    Check the table for Your PD infotype and subtype assigned to Object Type..
    SPRO --> OM --> Basic Settings -->Data Model Enhancement -->Infotype Maintenance
    Mohan

  • Transfer Custom OM Infotype data through ALE for HRMD_ABA Message type

    Hello Folks,
    I have created a Custom OM Infotype.When i run the PFAL transaction. All the standard infotype data is getting filled, but i dont see custom infotype data getting filled.
    Example: HRP9001 is the custom infotype.
    Please let me know the step by step process to populate the Custom infotype data in ALE Transfer.
    Thanks & Regards,
    Nishanth Kumar

    I think function module RH_MASTER_IDOC_DISTRIBUTE_HRMD shows some odd behaviour. It calls EDI_DOCTYPS_OF_MESTYP, which returns the name of the extension in an internal table named "doctyps". But later on, function module MASTER_IDOC_DISTRIBUTE is called with a structure "f_idoc_control". In this structure, the field "cimtyp" should hold the name of the extension, but it NEVER gets filled, although the value is present in doctyps-cimtyp.
    So what I have done, is to activate userexit #004, which is called just before MASTER_IDOC_DISTRIBUTE and modifies structure f_idoc_control, if desired.
    Call transaction CMOD and create a project in a non-SAP namespace: Zxxxx. The enhancement we need is "RHALE001" (HR-CA: Enhancement for ALE functionality in HR). One of its components is EXIT_SAPLRHA0_004, which consists of include ZXHALU08. In this include I called EDI_DOCTYPS_OF_MESTYP again to fill f_idoc_control-cimtyp.
    Here is my code for include ZXHALU08
    DATA: z_doctyps TYPE STANDARD TABLE OF edidocs WITH HEADER LINE.
    CALL FUNCTION 'EDI_DOCTYPS_OF_MESTYP'
      EXPORTING
        mestyp         = f_idoc_control-mestyp
      TABLES
        doctyps        = z_doctyps
      EXCEPTIONS
        invalid_mestyp = 1
        OTHERS         = 2.
    IF sy-subrc = 0.
      LOOP AT z_doctyps.
        f_idoc_control-cimtyp = z_doctyps-cimtyp.
      ENDLOOP.
    ENDIF.
    Hope this helps

  • Custom Infotype for eRecruiting

    Dear Experts,
    We need to create a custom infotype for eRecruiting.Need some pointers to the same.
    PM01 is used for PA infotypes
    PPCI for OM & PD.
    How should we create custom infotype for eRecruiting which starts from 5102 onwards?
    Please help asap.
    Regards,
    Sowmya

    Hi,
    Thanks a lot Divya.
    We indeed created the infotype using PPCI.
    For checking purpose we assigned it to a OM object & using Transaction PP01 entered a few records just to check if it is working.
    But the real test would be if we can successfully bind it to the webdynpro ABAP screen.
    Regards,
    Sowmya

  • Problem while creation custom Infotype for HRP (Organization mgmt)

    Hiii...
    Newbie to HR-ABAP...
    I have successfully created a custom infotype for HRP (Organization mgmt)....how can i see the infotype in t-code PP01.
    Thanks
    A

    Hi
    Perhaps MM11/12 can't update your custom field because you have use a data element where the flag Document change isn't setted.
    Max

  • Change Pointers activation for customer specific Infotype

    dear friends,
    could you please let me know how to activate the change pointers for customer specific infotypes? Currently we are using message type HRMD_ABA.
    regards,
    jp

    Anand:
    Unfurtunatly, not all the modification are registered in the log. For ei., You can track the systema status modification, the PR generation, etc. What fields change are you trying to modify?
    Hope this help
    Ezequiel

  • Screenshots for this customer specific Infotypes

    Hi,
    Can any one send me the screen shots for following customer specific infotypes.
    9002 Checklist
    9003 Bond
    9011 Cost of Recruitment
    9025 Appraisal
    Samriddhi

    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    check this one creation of infotype
    and according to this u customise ur coustmer speciofic infotype  might be helpful

  • Code for UpLoad program to load Custom PA infotype

    I need to develope UpLoad program to load Custom PA infotype which I created with 9001.
    Can you please give the complete code to Write upload program using standard available FM .
    Points will be awarded........
    Thanks
    Raj

    As this is a custom Infotype and no code is readily available, I would suugest that you try transction SHDB and record loading data into this Infotype.  This interm can be converted to a program which you can then tweek.  If I get stuck writting a BDC upload program then this is where I start.
    Regards
    J

  • Adding Custom OM infotype in Adhoc Query

    Hi All,
    I have created a custom OM  infotype . This infotype contains  only the description of job, i.e job notes . Below  is questions on this:
    1) When I am trying to add this infotype in infoset,then I am able to see this infotype in "related to object type" folder under TWO different relationship .Why its coming under relationship part. There is no relationship for this infotype .'
    To include this in infoset do I have to select this infotype under both the relationship.?
    Please find the screenshot of the relationships under which this infotype is coming:
    Thanks,
    Vaibhav

    Hi Vaibhav,
    First, your question is not so clear:
    You write that you are trying to add a custom infotype, which manages the job's description. Do you mean Infotype 1002? If so - this is not a custom Infotype - it's a standard one.
    Second,if you want to enhance the infoset, this is done by SQ01:
    Choose the relevant infoset by SQ01 and press the Change button
    Choose "Edit" menu --> choose the "Change Info-Type Selection" entry
    In the Popup window which appears, mark the checkbox for the relevant infotype
    Regards,
    Liran

  • Updating a table using a custom OM infotype

    Hey gurus,
    I have created a custom OM infotype HRP9608. I wish to use this infotype to update a table.
    I marked it as an external, country specific infotype and blanked out the Database table from SM30 (table T777D)
    I have also blanked out the FM. for tab name using SM30 (table T77ID) and added in Read Function and Primary Table.
    The infotype gets created correctly, but when i add it as an external infotype the screen changes. Can someone please provide me with a solution.
    Thanks.

    Hi,
    See the given link, It may help you.
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
    Regards,
    Shamma

  • How to add an customized HR infotype in personnel information on ESS

    Dear Experts,
    I am trying to add a customized HR infotype in personnel information on ESS.  Could you pls provide me some solution or references document. Thanks
    Daniel

    Daniel,
    check this(may give some hint)
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification
    Changing an input field's appearance to Optional in an ESS WD Java scenario
    you need to modify the HomePage framework to include link in ESS for custom infotype.search for chris solomon's blogs in sdn
    Thanks
    Bala Duvvuri

  • Custom Authorization Object for HR

    Hi,
    As per our Company's internal needs I have created a Custom Authorization Object for HR named ZP_ORGIN (it has Personnel Subarea field BTRTL besides what's there in Auth. Object P_ORGIN) and made it Check/Maintain for transaction PA30 in SU24.
    I can see the entries in the USOBT_C & USOBX_C tables for this object, I am also able to add this object in the roles as well.
    Everything looks fine, but when I execute the transaction & do a trace on it, the object ZP_ORGIN is never checked (for a user having this object in his/her User Master). Only P_ORGIN object is checked instead.
    I believe I'll have to write some ABAP code e.g. AUTHORITY-CHECK OBJECT 'ZP_ORGIN' etc. Can anybody tell  which User Exit or Field Exit I'll have to put the AUTHORITY-CHECK code in, so that my new custom authorization object is alwayz checked.
    Your help will be appreciated.
    Thanks,
    Mandeep Virk

    Hi,
    I have created a Custom Authorization Object for HR named Z_ORIGIN (it has Personnel Subarea field BTRTL besides what's there in Auth. Object P_ORIGIN) and made it Check/Maintain for transaction PA30 in SU24.
    I can see the entries in the USOBT_C & USOBX_C tables for this object, I am also able to add this object in the roles as well.
    Everything looks fine, but when I execute the transaction  the object Z_ORIGIN is never checked (for a user having this object in his/her User Master). Only P_ORIGIN object is checked instead.
    We've ran the report RPUACG00 also which is mentioned in this thread.
    We also coded the authority check code in the both user exit ZXPADU01 and ZXPADU02 for PA infotype operations
    I believe I'll have to write some ABAP code e.g. AUTHORITY-CHECK OBJECT 'ZP_ORGIN' etc. Can anybody tell which User Exit or Field Exit I'll have to put the AUTHORITY-CHECK code in, so that my new custom authorization object is alwayz checked
    but still it is taking the P_ORGIN object.

  • HR Authorization : Custom Authorization Object  for P_ORGIN

    Hi,
    I have created a Custom Authorization Object for HR named Z_ORIGIN (it has Personnel Subarea field BTRTL besides what's there in Auth. Object P_ORIGIN) and made it Check/Maintain for transaction PA30 in SU24.
    I can see the entries in the USOBT_C & USOBX_C tables for this object, I am also able to add this object in the roles as well.
    Everything looks fine, but when I execute the transaction the object Z_ORIGIN is never checked (for a user having this object in his/her User Master). Only P_ORIGIN object is checked instead.
    We've ran the report RPUACG00 also which is mentioned in this thread.
    We also coded the authority check code in the both user exit ZXPADU01 and ZXPADU02 for PA infotype operations
    but still it is taking the P_ORGIN object

    Online Help
    <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/d9/64141c0774194593da29f3cb813f1b/frameset.htm">P_NNNNNCON (HR Master Data: Customer-Specific Authorization Object with Context)</a>

Maybe you are looking for