Custom Picture Settings for Insignia 42" NS-L42Q-10A

Does anyone wish to share their custom picture settings (contrast, brightness etc.) for the Insignia 42" NS-L42Q-10A? The vivid default is to bright, so I have been trying to come up with a custom setting and would like to hear what has worked for other owners.
Thanks.

Well, it turns out that I neglected to include a critical piece of info in my post.  This behavior was occuring when using my Harmony 550 remote with the Insignia TV.
I tested the behavior with the remote that came with the TV and the settings were saved.  So I went to change the settings on my Harmony remote when I discovered Logictech had a software update that included the Insignia TV.  Installing that update fixed the issue.
And in case anyone else reads this, I am very pleased with this television set.  I had to learn a few things about HDTV first though to get everything out of it that it offers.

Similar Messages

  • Best custom video settings for QT on iPod

    What are the best Custom video settings for creating a QT video via iMovie for use with the iPod? That is to say, I want to d/l from a Camcorder and then convert that to Quicktime...ultimately to be played on the iPod.
    Thanks,
    Lyman

    Larry,
    Try performing a Google search of world of warcraft mac graphics settings. With the popularity of the game, you'll get quite a few hits, One such hit is:
    http://www.xlr8yourmac.com/games/macwowperformance.html
    Steve

  • Custom communications settings for an Apple LaserWriter

    I have an Apple LaserWriter 16/600 up and running on Mac OS 10.4.11 and I want to set some custom communications settings by using the configuration switch on the back. (The switch is currently in the down position for standard settings.)
    I have the Apple Printer Utility-PPC from OS 9 and I have Classic open but No luck getting things to work.
    What more do I need to do?
    Any suggestions?
    Shamus
    Message was edited by: Shamus

    O.K. Grant,
    I was just in OS 9, opened the Chooser, selected Laserwriter 8 icon, and it found my Laserwriter 16/600 (which i have hooked up). And choosing Setup>Auto Select, it found the "Laserwriter 16/600 PS" PPD.
    I've been trying to download, install and understand this Laserwriter 8.5 thing but, looking in my Extensions>Printer Descriptions folder, I see this "LaserWriter 8500 PPD v1.2" is already there. And I can use Chooser>Setup>SelectPPD to redo my Laserwriter using that PPD.
    So, some of my confusion may be cleared up but, this is probably more than I needed to figure out.
    Thanks
    Shamus

  • Cannot Change Custom Import Settings For AAC's

    Last night I changed the custom import settings from 192 kbps to 160 kbps for a particular mp3 album I wanted to convert with that bitrate. I tried to change the custom settings back to 192 kbps (the bitrate most of my mp3's & wma's are in). For some reason, the window that came up many times before refuses to pop up now. I tried the custom settings for mp3's and that window still pops up. Anyway, I tried a repair and nothing happened. I uninstalled iTunes, Quicktime, Bonjour, and Apple Software Updates, deleted there corresponding folders in C:/Program Files and then restarted the computer. I downloaded the iTunes 9 installer through the iTunes website and proceeded to reinstall iTunes. Still, the problem exists. I'm not sure what else to do? The only other thing I can think of is to do the same except install iTunes 8 instead and then search for updates and reinstall iTunes 9 that way. Would anyone know of any other method on solving my problem? Any help would be greatly appreciated, thanks!

    glenn,
    I have the same problem and it is driving me crazy. If you find a solution please email me at [email protected]
    thanks and good luck

  • Custom Sequence Settings for Split Screen

    Hello all,
    FCP 6. I am doing a split screen where I am combining two 720x480 videos side by side. I did the whole project by scaling down both videos to match whatever the sequence settings were. How can I create a custom canvas/ sequence size to avoid scaling down the frames and cutting on the image quality?
    I created a custom sequence setting doubling the width to 1440 and keeping height at 480.
    Can I copy and paste the clips from the old sequence without the scaled down quality to the new sequence? How can I do that?
    If I open a new sequence is the new setting going to be in effect?
    Any other suggestions on how to deal with custom size frame/ split screen?
    Thank you!

    Dear Jim,
    Thank you for help! Does make sense. I did all like you suggested. After removing 'basic motion' and pasting into new sequence, the clips appeared big default size instead of small. I re-applied motion attribute like you said, but isn't it scaling down again since I am sizing from big to small (50%) again?
    It looks good on the screen but I am not sure about actual resolution of the clip. In clip-item properties-format I read frame size but I am not sure if this info is about the source file or the clip.
    I would like to get around this issue without scaling down (keeping the scale in motion tab at 100%).
    The way I tried to deal with the scaling and res before I got your answer, was after I changed the 'global' settings for the custom 1440x480 sequence, and after creating a new sequence, I went to sequence settings again (from top menu) and set to custom (1440x480) (with just global settings the pasted clips looked like before). After copying and pasting with removed attributes-distort, all was in the original right/left order normal size and resolution.
    The way I tried seems to meet my need (as pasting attributes-motion to all again would be complicated as the design of the project does not stick to the clearly left/right pattern but fluctuates back and forth at times and there is too many short clips).
    The only problem I have now is with the RENDER.
    After I rendered what I did to your suggested solution and mine (two sequences), the whole project shows in low res. I checked the render settings in Sequence-Render Control, and both resolution and frame rate are set to 100% so I dont know what I do wrong.
    Any suggestions??
    THANKS!!!

  • Save custom drum settings for Drummer track?

    Hi guys.  Wondering if there is a way to save the Drummer region settings from one project and use them in another project without manually setting things like complex, loud, fills, etc.  THanks.

    "Save Drummer Presets" is a feature that is only available in Logic but not in GarageBand.  Here is screenshot with both GarageBand and Logic open. You can see that the Action Menu (the one with the gear icon) is not available in GarageBand.
    The good news is (in case you use Logic and GarageBand), all the Drummer Prests you save in Logic are also available in the Presets Menu in GarageBand. They are stored in the the following directory:
    ~/Music/Audio Music Apps/Drummer/Presets/"Name of the Drummer"/.... .dpst
    The presets are stored as XML files with the file extension .dpst.
    If you have a Logic friend who can saved cool presets, you can copy his files into your Drummer folder and GarageBand can see them. If you more interested in a "science project", you can duplicate a dpst file, open it in BBEdit and edit your Preset numerically.
    A lot of details and more information (from basic to more advanced) about GarageBand are found in my new manual "GarageBand X - How it Works", the only comprehensive manual available for GarageBand.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • List of Custom profile settings for mobile internet

    Hi, My boss travels frequently overseas and the mobile internet feature on DM6 is very useful.
    i was wondering if there is a list available for all countries's service providers so that we can add the custom profile to the existing list on DM6
    Thank you.

    Mugunthan
    Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
    One of them is
    ===========>>>
    Uploading snapshot to central instance failed, with 3 different messages
    Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
         at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
    please assist.
    regards
    girish

  • How can I adjust picture settings for Netflix and other apps?

    i nwed to set up 65h84 channels w/o remote also need to unlock  vchip and codelock  w/o remote

    I don't believe you can perform all functions without a remote. If you don't have the remote, you may want to acquire a new remote.
    - Peter

  • Request for optimal calibration settings for Lenovo ThinkVision monitors

    I understand one person's settings may not hold true for someone else's given display variances, but I would very much like to get anyone's suggested, optimal picture settings for each of the below two monitors.
    Primarily monitor 1 looks way worse than monitor 2 for me, but I still want help with both.  Models listed below.  Please include each item/setting with # used so I can try them out and see if it helps.
      Monitor 1: LEN L1900pA
      Monitor 2: LEN LT1913pA
    Thank you for your help!

    Hi Jwhyrock,
    Jwhyrock reply,
    I played with settings on all 3 monitors.  Not entirely sure I like what I did, but it is a bit better.  I would still like to see what settings anyone else is using for their display such as contrast, brightness, color saturation etc.
    Below is the link on how to setup the default calibration for display, please follow the steps. And also suggest you to check with resetting the Monitor to factory default setting in the monitor, or you can also check with installing Monitor .inf for the specific model which can be downloaded from the manufacturer link.
    Display Calibration
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Toshiba 39L4353DB - picture settings

    Hi all,
    could anyone advise on the best picture settings for this model. Most reviews say set to Hollywood day or Hollywood pro settings but even with adjustments to contrast & brightness controls the picture seems too greyed out. The standard setting is about the best I can get but seems too vivid for my liking.
    The auto view setting is too dark, dynamic too bright. Anyone out there with this model who give some guide what they have set their set to. I have had two previous Toshiba televisions & have given excellent service with no trouble but I feel the picture settings were far superior to the current 39L4353DB.

    As Im not mistaken there are three (beside the Dynamic and standard mode) additional picture presents: Hollywood Night, Hollywood Day and Hollywood Pro
    Hollywood Night and Hollywood Day mode should be used in different ambient light settings.
    Hollywood Pro default values seem to be very similar to Hollywood Night but Pro supports additional auto-calibration function.
    But its not easy to provide the best picture settings because this depends always on different factors for example; device which is connected to TV, environment, viewing habits, picture source and quality
    I would recommend you to download some basic full hd test images and to calibrate the TV for your own proposes.
    Maybe this thread could be helpfull too:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=72951

  • Custom Equalizer settings lost

    Guys,
    I had designed custom equalizer settings for my "tunes" to match my hearing loss. I believe somewhere in updating my iTunes application they were lost. They no longer appear in the selection window of the equalizer. Any body know how to get them back? iTunes v10.1.2. Thanks.
    Regards, Phil
    Macintosh b'gosh

    I am having the exact same problem. A number of my older files seem to have kept their custom settings, but not newer ones. I think it may have something to do with the EQ.plist file in the preferences folder in my library.
    Does anyone know what the best way of resetting that file is and whether that will fix the problem?

  • Settings for Ex Post Forecast

    Hi Experts,
    I am using Expost Keyfigure(9AVEXPOST) in Pl. Book and I know the concept for ex-post. But needs to know that what all settings need to be done so that the value ll be populate in keyfigure after stats run.
    Working on SAP SCM 5.10
    Thanks for your help in advance.
    Thanks.
    Hitesh

    Hi Hitesh,
    Please ensure the following settings.
    1) While defining the planning book, ensure the key figure for expost forecast is maintained
    2) Maintain Customer-Specific Settings for Outlier Correction in customisation
    3) The planning area needs to be initialised with the characteristics and key figures
    4) While maintaining the forecast profile, under univariate forecast profile tab, select Ex-Post Method in the Outlier Correction field.
    When you execute a forecast, the system:
    1.      Carries out a forecast with the chosen model using the u2018rawu2019 historical data. It calculates an ex-post forecast for all historical values.
    2.      Checks the periods in the initial phase (Customizing setting, default 3 periods) against the ex-post forecast. If the historical value is outside the tolerance lane the system corrects the value to either the ex-post value or the nearest boundary of the tolerance lane.
    3.      After the initial phase, if it has found and corrected an outlier, the system carries out another ex-post forecast and calculates MAD again. You can specify whether the system uses the local MAD (the value calculated up to and including the current period) or the global MAD. You can also specify in Customizing how many periods have to be free of outliers before the system calculates the ex-post forecast again. The default is 2.
    Customizing
    You can save the above settings user-specifically in Customizing under Advanced Planning and Optimization ® Supply Chain Planning ® Demand Planning ® Basic Settings ®Maintain User-Specific Settings for Outlier Correction. If a user does not have their own settings, those of DEFAULT_USER are used. It is possible to change these system defaults.
    Regards
    R. Senthil Mareeswaran.

  • Picture Settings being overidden

    My Picture settings for Mode, light effect, and energy savings are being overidden somehow every 20 minutes. Also if I set these settings on the TV then when I turn on the STB they immediately change. I did speak to a Verizon Tech on the Phone and he claimed it was not FIOS but something in the TV.
    Solved!
    Go to Solution.

    Hmm, I know my STBs usually reset their own video settings when they are turned on/off (i.e. SD override, resolution, etc.), but I haven't heard of them resetting the TV's.

  • I want to set Firefox to never remember history. When I do this using the tools tab and click okay, it goes right back to "Use Custom Settings for History". I don't want that.

    I know how to manage privacy using the tools tab at the top of the address bar, or so I thought. I want to choose "Never Remember History". When I do that, and click "OK", the next time I check the privacy settings, the history is right back to "Use custom settings for history". I don't want this. Also, I don't want to use autocomplete for forms, but I can't get those settings to stay, either. I basically don't want info. stored on this computer. My system was hacked several months ago, by some joker who named all my system folders a racist slur (I reported it to Norton, and a technician had a look at it). Anyway, I want to keep things as safe as possible. Please allow me to delete all my history when I close Firefox. I don't really like Google, either, because they have a reputation for not respecting people's privacy. I don't like that I didn't have an option to uncheck google's toolbar when I installed Firefox.
    Thank you.

    That is probably OK.<br />
    You may have changed one of the other history or cookie settings.
    If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were made.

  • I have selected "Use custom settings for history" and pressed "OK" but it defaults back to "Remember history", how do I stop this?

    I have to enable cookies in order to have an online purchase credited to my mileage account. So, I opened Firefox Tool and selected Options then Privacy. There, I changed "Remember history" to "Use custom settings for history," as, this will achieve what I am trying to do. However, when I press "OK" the box jumps back to the Privacy box and I see that "Remember history" is still the setting. What steps do I take to prevent the Privacy box from defaulting to "Remember history" when I want to change that setting to something else?

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    Do you have a problem with the cookies?
    You can inspect and manage permissions for the domain in the currently selected tab via these steps:
    *Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
    *Click "More Information" to open "Tools > Page Info" with the Security tab selected
    *Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Maybe you are looking for