Custom Preset for Nikon D7000

I recently upgraded to a D7000 and PE9 (was using PSE4). This DSLR creates .mov video files - and I am creating a finished QuickTime video. Used for viewing on computer and upload to YouTube, Vimeo and other sites. The custom preset I have created is below. I am looking for any comments on how I can (or if I should), optimize this setting in any way?
Also, does it make sense to create a different output file - perhaps an FLV?
H.264
Quality 100%
1280 x 720
Frame Rate 29.97 (the camera is recording at 30fps, should I change my preset to this?)
Limit data to 8,000 kbts
Aspect Ratio = Square Pixels (1.0)
Field Type = Progressive
Render at Maximimum Depth (24 bit)
Key Frame every 15 frames
I did find that if I renedered at less that 8,000 kbts I was getting distortion. This 8,000 was a bit of a "guess" range, keeping a 5 minute video under 400 MB. If I had not restriction on size, the quality was extremely nice, but file size for same video was over 2 gig.
Any thoughts would be appreciated.

If you're going to post to YouTube, these output settings will get you the best results:
http://forums.adobe.com/thread/623549?tstart=0
But, of course, getting the best results from your output is highly dependent on how well your source video matches your project settings.
If your project settings are a perfect match for your camera's video, you will not see a red line above the clips on your timeline until you add an effect or transition to them. Was that the case for you?

Similar Messages

How to export book pdf using custom presets for all book files in indesign using javascript

How to export book pdf using custom presets for all book files in indesign using javascript.

Hi jackkistens,
Try the below js code.
Note: you can change your preset name in below (e.g, Your preset name).
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
example:
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
thx,
csm_phil

Camera Raw for Nikon D7000

Hi
My Camera Raw in Elements 8 does not support Nikon D7000
/Bertil

Hi
My plan was to buy Lightroom version 4, (I hope that ACR in LR4
includes support for Nikon D7000) can I than (after ACR editing) open
the file in elements 8? and use the edit function in Elements8? what I
understand lightroom does not have edit functions like Elements have?
(but maybe it's enough woth ACR edit function) But just now the
problem with light room is that I use windows XP, and LR4 need Vista
or Windows7.
BR
/Bertil
2012/5/29, LittlePaleFace <[email protected]>:
LittlePaleFace http://forums.adobe.com/people/LittlePaleFace created the
discussion
"Re: Camera Raw for Nikon D7000"
To view the discussion, visit:
http://forums.adobe.com/message/4446787#4446787

Is There A Way To Create Custom Presets For Sharing/Exporting?

First-time iMovie users, long-time Mac enthusiast.
VERY impressed with how easy this wonderful application is to learn, but the inability to save custom presets exporting to Quicktime is puzzling.
iMovie6 does remember the settings I specified in "Expert Settings", but it'd be great to save it as "canned preset" that would show up w/all the other ones (Email, CD-Rom, Web, etc).
Is this just another feature I've yet to discover, or is it possible at all? Or is it the first roadblock I've encountered where extra ca$h is needed for another product?
many thank u's in advance.

.. the key to using a Mac is to think less..
this is EXACTLY the Mac-experience.. and that is, why PCusers often call us "computer illiterate" .. we don't want to know, what a bios is, a batch file, a bitrate..
my father-in-law spends 90% of his time with re-installs, set-ups, drivers.. and in the meantime, I create movies and dvds ...
maybe a bit of TOO much glory, but still saying it all:
http://www.youtube.com/watch?v=No1MxAnHuJM
come back here often, share your experiences, dare to ask any question.. there's no dumb question, just dumb answers
have fun with iM and your Mac ...

CS-4 Camera Raw for Nikon D7000

Using the Help -> Update my CS-4 saya there are no updates available at this time. However, Photoshop and Bridge cannot show images for the Nikon D7000 or the Nikon D3100. The latest Camera Raw update (for CS-5) will not install in CS-4. Short of buying CS-5 is there a way to update Camera Raw for CS-4?

Cs4 doesn't support the needed 6.3 camera raw plugin, but
you could use the 6.3 dng converter to convert your camera raw files to
the dng format so cs4 and bridge can read the files.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4924
MTSTUNER

Brushes not working with new RAW conversion for Nikon D7000

I have always worked with RAW files w/A2 & A3.1.1 with my Nikon (D80) And now, just got Nikon's D7000 and of course, waited for the RAW conversion that just came out.
Apple addressed the Nikon D7000 RAW situation (which was fixed this month), but now when I use "brushes" on RAW pics, very little if any changes occur.
Very little affect occurs (if any) with A3.1.1 and the "new" RAW conversion for Nikon. I shot (at the same time) both RAW and JPEG (as cameras can) and put them side by side in A3. Pulled down Dodge / Burn / Skin Smoothing & Blur from brushes and they all did a great job. But on the RAW pic that was taken at the same time..... nada, nothing (maybe a minute change, but nothing to call home about).
Bottom line, the newest RAW capability that came out a couple of weeks ago, somehow messed up brushes? I don't think I am that smart or lucky to see this issue. Am I missing something here? If so, please set me straight.
I have tried the places one pulls down brushes but no affect on RAW. Using curves from bricks and luminance, etc, works just fine. Guess I am stuck with JPEG's until this is resolved by our A3 guys, or someone realigns me.

I am able to import them, but I cannot edit them as RAW files. They behave like .jpegs. So correcting exposure for example is a horrible experience. My 5D Mark II files behave as they did in Aperture, so it is the FZ1000 RAWs in particular that are problematic.

3.3 RC - need camera profile for Nikon D7000?

I'm kind of a knucklehead about Adobe so please be patient with me....
I have a Nikon D7000 (not a D700). Downloaded 3.3 RC and can edit my RAW pics - works for me.
But there are no profiles in the camera calibration. What am I missing ? Is it a Camera Raw update?
Maybe one of you folks can explain this to me.
Thanks, Michael.

No, Lightroom does not use the ACR plug-in. The camera profiles are part of the Lightroom installation. I don't have a D7000, but I recall reading in another thread that there was an Adobe Standard profile available. My guess is that this is preliminary support until the other regular profiles can be created. I might be wrong.

Unsupported image format for nikon D7000????

I bought the latest Macbook air 13 inches and the Nikon D7000.
I tried to import the raw files (NEF) from the Nikon d7000, but it show can't read the files type, or
unsupported image file. It works fine with my nikon D5000, why?
anyone can help?

It's the price we "early adopters" pay. It usually takes a few weeks to even months before Apple and Adobe add support for the latest RAW camera profiles. There is no standard RAW format, even within a brand. It's maddening, but that is the nature of the format.
For now all we can do is either shoot JPEG and grin and bear it or shoot JPEG + RAW, and when RAW support is available trash the JPEGs and upload the RAWs. Or in your case use the 5000 when you absolutely need RAW.

Tether support for Nikon D7000

When will this support be available?

Yes, this would be very useful to know - it was acknowledged as a gap in LR3.3. I'm stuck in the middle - my D200 isn't supported, and my D7000 isn't supported.
I have the choice of spending too darned much money on Nikon Capture 2; I'll do that, but it adds more software in the way, and if I don't need to go that route I'd appreciate not having to - but I can't make that decision without a sense of whether this is a priority for Adobe.
Can we get some clarity here, please? It doesn't show up on the RC notes for 3.4, but one can always hope?
Tom

Presets for Nikon D300

I have spent some time fiddling in Lightroom 1.4.1 trying to find a preset that looks similar to the "Vivid" setting in the camera. In case it is useful/interesting for others, here it is:
http://superelectric.net/tmp/D300-CL.lrtemplate
Comments and suggestions appreciated :-)

Hi,
I'd like to try this, but it's a text file. How do you import it into LR?
Nevermind ... figured it out. Stripped off appended .txt.

Any *Recent* word on tethering support for Nikon D7000?

The previous thread on this issue is marked "Answered", but the latest post is over three months old. Please tell me the D7000 will be supported (for tethering) soon. It's becoming a real issue (for me, at least).
dds

The previous thread on this issue is marked "Answered", but the latest post is over three months old. Please tell me the D7000 will be supported (for tethering) soon. It's becoming a real issue (for me, at least).
dds

How to configure and save presets for custom scanning?

There are 5 presets in Acrobat XI for scanning files: "Autodetect...", "Black &White...", "Grayscale...", "Color Doc...", and "Color Image".
There is also an option to to do a "Custom Scan..." and "Configure Presets" (modify the 5 above).
However, I could not find any way to create my own custom presets.. is that not possible?
I was hoping to at least save my configuration(and/or possibly create a few different custom scan templates) in the Custom Scan for future scans but that was also not an option.
I would gladly use the 5 presets and configure them to how I want them but its unfortunate there are no output options there to automatically append a scan to an existing file or create multiple files from a continuous scan.
So... 1) Can you create custom presets for scanning? 2) Is there a way to configure output options in the existing scan presets? Thanks!

Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck

Keyboard Shortcuts for Custom Presets

I have a Custom Preset for Lightroom 3, that exports a copy to a seperate folder, as jpg. The issue is I have to select File, Export with Preset and then my preset to export.Can I create a keyboard shortcut for this?
Bob

Bob,
I think there is a shortcut (Windows anyway) whereby you right-click the images after selecting them in the Grid mode, left-click "Export" then select your preset. The images are then exported based on the preset without further user intervention. This might be better than as shortcut key.
Jeff

Nikon D7000 LR4 Camera Raw color issues

I just upgraded my camera from a Nikon D70 to a D7000.
Problem: When I process the RAW /NEF files with Adobe Lightroom 4 the color is terrible. By that I mean, the images look dull, dark and have no pop. The coloring is not even close to what is displayed on the Nikon camera screen.
When I use Nikon View NX: The software which is pakaged with the camera produces an image which is, or almost identical to the image on the camera after the photo is taken.
I like the funcionality of lightroom better than ViewNX, so what I have been doing is processing with ViewNX and then exporting to a TIFF. Opening up LR4 and then importing and cataloging. This process is a pain and time consuming.
I also have found LR3 does a better job than LR4 at processing the images.
Is there a way I can tweak or download corrected ACR settings to match my Nikon D7000.

I have figured out myself the profile correction problem for my Nikon D7000 NEF Problem. It almost match to the one in NX2 or even on camera LCD. the following is what I have adjusted in my LR4
Brightness +1.00
Contrasts +28~33
Shadow +40~55
Black -25
Don't Forget change the Profile setting on Camera Calibration under the Develop mode to match the what you set on your camera. I always shot on Standard mode, therefore I set the Profile to Camera Standard.
The following is the way I figure it out.
1. I imported the photo under "Zeroed" at Import page under Develop setting > Lightroom Genaral Present > Zeroed
2. Open one of the imported picture on Develop mode
3. Scroll down to Camera Calibration change the profile setting to match they one you set on your camera, in this case I choose Camera standard.
4. Under the Camera Calibration>Process you will see 2012(Present), changed it to 2010, and change it back to 2012 (present again)
5. You will notice that the develop setting automaticly change to the following (Brightness -1.00, contrasts -33 and black +25) Let say this is what lightroom did to your picture( from Nikon D7000 NEF)
6. and then Change everything back to " 0 " will you find your picture nearly close to the one you saw on NX2.0 or Nikon LCD
If your found the step above is hard to follow, please just change the Brightness +1.00, Contrasts +33 and Black -25, and dont forget adjust a bit of shadow as well.
for the people who dont know what Nikon done to Nikon D7000, please dont be expert to say "you dont know RAW". please read more reviews first before helping people who are new to RAW or even stuck on RAW. This forum is helping people with our knowledge, is not to make people need help to get more confuse.
For Nikon D7000 user.... Remember turn D-Lightning off.... this is one of the problem will cause LR4 change your tone to more darker, especially on portrait photoshot. Hopefully Adobe will realease the new update soon to match the new system inside Nikon camera.
Please note that the step above only Apply for Nikon D7000 and Lightroom 4 only. And it is not 100% correct to what you seen on your camera, at least is 80~90% Match!!

Nikon D7000 NEF with CS4

Having difficult time finding which DNG converter to download for Nikon D7000 that will work with CS4. Tried 7.1 and 6.7, no luck when I look at RAW files.

See my reply in your other thread. Nikon Transfer damaged your files during transport.

Custom Preset for Nikon D7000

Similar Messages

Maybe you are looking for