Custom privacy settings do not work. It either remebers all hsitory, or none. Dumps all cookies, even ones on exception list. Need to fix it. Help menu is j

I have two websites I need to remember the cookies for. If not, I am forced to verify my computer every login. I have read the troubleshooting, done what it says, and none of it works. I tell it to remember specific sites, enter them, and it still forgets them when I exit the program. If I tell it remember everything, it remembers stuff I don't want. I have went into the about permissions thing. The two websites are listed, the setting choices tell me nothing. I have no idea what does what, as it is not defined. All I know is the two websites are listed, yet it is still controlled by the privacy tab/allow exceptions - or - never remember anything.

Could I suggest that you set your Privacy tab to "Firefox will: Use custom settings for history" and then use these settings for cookies:
[X] Accept cookies from sites
Accept third-party cookies: Always
Keep until: I close Firefox
In the Exceptions dialog, for the two sites where you want cookies to be remembered longer than just the current session, create exceptions using the base domain. In other words, if it's www.example.com, create an exception for example.com set to Allow.
Uncheck the box for "Clear history when Firefox closes" or if you want to use that for things other than cookies, use the Settings button to de-select cookies.
Any luck with this combination?

Similar Messages

  • Privacy settings STILL not working - sort it out s...

    i always have my privacy settings fixed so that all options are set to "contacts" only.  however i am STILL getting messages from random strangers saying that i appear interesting.
    i'm not interesting. i have no interest in receiving these messages.  i have updated my software and rechecked all the privacy settings but i still get these messages.
    skype - can you PLEASE sort this out because it's getting so i don't even want to log in.  it's SO ANNOYING!!!!!
    i'm running on a mac (lion) - updating doesn't help. any other ideas? frankly at the moment i don't see why skype even bothers to have security settings - this is not the first time (by any means) that this has happened: they shouldn't make these kind of settings promises if they can't keep them.

    jordankees wrote:
    I am having the same issue.  I've gotten over 200 abusive IMs and random people calling me.  I have had Skype for years and I have never had an issue with my security.  I only have a smallamount of select contacts and I have never allowed people that are not on my contact list to contact me.  Please help me fix this.  It is getting out of control and I now have more than200 people blocked. I tried the whole changing my online status thing and it appears to have worked, but I am still skeptical.  I dont know how this happend and now I am worried that my information is out there somehow for the world to see.  
    If/when you have this issue, doing this http://community.skype.com/t5/Security-Privacy-Trust-and/privacy-settings-STILL-not-working-sort-it-... will fix the problem.
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Apps not showing up in privacy settings, Skype not working

    Skype was working okay, but today, when I tried to call someone from my phone, it said i had to allow skype to use the mic, but I had already done that. I still went to privacy settings, but no apps showed up there. But on the camera, while I had multiple apps that use it, none showed up either. In fact, tthe only privacy setting working right was location services!

    Hi SebaJK7,
    Thanks for the question. If I understand correctly, programs are not being listed in settings to use certain features. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Custom Import settings (MP3) not working?

    I downloaded itunes today having read the help guides that I could d/l files in MP3 format. I changed the custom import settings as per the help guide and purchased music - only to find the downloads are still in m4p format & as such are no good for my mp3 player.
    Right clicking & converting doesn't work as they are protected.
    I am hoping this is just an error on the custom set up on my part, but reading this forum I did read about protected and Plus purchases, which I did not see in the help guide before I bought the music.
    So, my question is: can the protected files be downloaded with the customized MP3 encoder settings or am I completely limited to Plus purchases?
    Thanks!

    The import setting have no effect on store downloads, all iTunes store downloads are AAC (MP4). The import settings are used to convert the songs imported from CD or to convert unprotected songs in iTunes, not for choosing a format to download song from the store.
    You can't convert standard iTunes copy protected songs, only the iTunes Plus purchases can be directly converted to another format. Where possible if you need to convert you should go for iTunes Plus tracks. The only thing you can do with standard songs apart from playing them in iTunes or on an iPod/iPhone is burn them to Audio CD. You can use that CD just like any regular one. If you need songs that will play on a non Apple player you'd be better looking around for other stores that provide unprotected MP3 downloads.

  • My privacy settings are not working properly!

    I had to block more than 20 people today! Everytime I hit "people in my contacts only" and then click save, it goes right back to "anyone"! This is seriously getting out of hand, please help!

    not sure of the logic behind this procedure, but it seems to fix the such problems in many cases.  switch to offline status for 5-10 seconds, then revert back to online.  Then try to change your privacy settings afterwards.
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • HT4623 I can't get to my settings, buttons not working and I just have a white screen. Any ideas on what is going on? Thanks for any help

    I have tried everything I know of. It worked fine an hour ago. I have a white screen, buttons will not turn it off and I get get to anything. Any ideas whats going on? 
    Thanks for any help.

    Sunny1963 wrote:
    I have tried everything I know of.
    That's fine -  except nobody here knows what you have been able to think of try to this point.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    It really helps if you let others know "what you know of" and already tried.

  • Custom Master Detail form not working In EBS

    Custom Master Detail form not working In EBS
    Hi all,
    I have two custom tables -- 1) XXX_DIE_Headers
    2) XXX_DIE_LINES
    I developed a Master Detail form based on above tables. XXX_DIE_Headers is the Master Block (Single record) & XXX_DIE_LINES is the detail block ( Multi line block ).
    Yes, I used Appstand,Template.fmb for developing this form. The Master block has three fields out of which Two are required fields and i have given initial value for them.
    As i deployed it in APPS(EBS),everything about it is working fine (insert,delete,master-detail behaviour) except querying.
    When i press F-11 , It pops up a message "Do you want to save changes you have made" Choice - yes,no,cancel.
    I don't want this message to pop up.
    The scenario is :- I open the form.( without entering ) Press F11 . The message Pops up.
    Please give me suggession on how to work it around so as form directly goes to query mode ,without popping the message.
    regards
    ravi

    It seems that you are changing a database value in your form, do you have any changes in WHEN-NEW-FORM-INSTANCE???
    what the form is trying to tell you that you have changed something, do you want to save it?
    I suggest you debug your form and see what's happening step by step.
    Tony

  • Drawing with a custom profile stroke is not working for me. Does it work for you?

    Drawing with a custom profile stroke is not working for me. Does it work for you?
    I can only apply it on an existing stroke but can't draw a new one with the selected profile. In fact if I change the profile to other than the default Uniform I also can't draw a new stroke with any other width than the default 1 point. This doesn't seem normal.
    Using SC5 on a PC.

    Another question on the same topic.
    Once I add a new profile to the list is it possible to put it on top of the list. I need this because the Adobe people decided to put the list in a tiny scrollable window with only a few of the first profiles showing. If there is noting in the interface may be I have to modify some program files settings?

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • My iPod 5 will not sync ANY music. All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
    If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device.

  • Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

    Hi Guru’s,
    I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
    Following is the screenshot attached for your kind reference,
    That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
    Right now I am using ECC6 and EHP7 SAP system.
    Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
    Hope the requirement is clear and in case need any clarification please revert back.
    NOTE: Right now in Development System we don’t have any successful user to compare the settings.
    Regards,
    Kumar.S

    Thanks Patra.
    Even I searched in SAP portal and couldn't able to find the relevant OSS note.
    Following is my BASIS team response,
    "Only you can view Table Field values from higher release"
    Can you suggest / guide on this comment as well.
    Looking forward to your speedy response.
    Regards,
    Kumar.S

  • My itouch bright settings is not working

    My itouch is dark and the bright settings is not working.

    Have you tried the standard fixes:
    - Rest:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes on your computer
    - Restore the iPod to factory defaults/new iPod

  • Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working

    When I upload photos from my phone to computer Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working. Even when I press preview on photo and they open in windows photo viewer I cannot save the file to my computer. I have Photoshop CS4

    infact both are same only..http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter        "http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter"

  • Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.

    Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.

    You said:
    We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
    Just what did yo do to gt iTunes to see the download:

  • Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).

    Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).

    Hello notime4,
    The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

Maybe you are looking for