Custom program - unknown warning messages after upgrade (4.6c to ECC 6.0)

Hi,
At work, we are currently upgrading from 4.6c to ECC 6.0
One of the custom (z) programs that was moved is displaying warning messages, and preventing the user from viewing a report.
The warnings appeared in ECC 6, but were never there in 4.6c. The warning message is "Restrict your selection". However, no matter how much criteria is entered, the warning message still appears.
The program code uses no messages or error handling, and the messages show up on the initial selection screen, after hitting execute.
However, just for testing, I copied the program to my own z program and it works fine.
Why is this happening with the original program? While creating a new program with copied code fixes the problem, I donu2019t understand why this would be happening in the 1st place.
Any ideas?

So what the zprogram does? what tables are involved in the report, if possible post a link to your code.
Regards
Karthik D

Similar Messages

Warning message after upgrade to Fedora FC3

After upgrading a Tarantella server to FC3, I get the following message
every time on starting Tarantella:
Starting Tarantella server (version 3.30.907). Please wait...
Warning: bad syntax, perhaps a bogus '-'? See
/usr/share/doc/procps-3.2.3/FAQ
Tarantella services are now available on this host.
Tarantella seems to work alright - is this something I should be concerned
about?

Thanks Bill - we are going to be upgrading to SGD 4.0 so I just wanted to be
sure that we aren't going to take any unresolved bugs with us
Phil DG
"Bill Weir" <[email protected]> wrote in message
news:d1n05f$l6c$[email protected]..
I'm pretty sure this message can be safely ignored. It was fixed in EE
version 3.42.
Regards,
Bill Weir, Tarantella Engineer.
pubnews.tarantella.com wrote on 21/03/2005 15:45:
After upgrading a Tarantella server to FC3, I get the following message
every time on starting Tarantella:
Starting Tarantella server (version 3.30.907). Please wait...
Warning: bad syntax, perhaps a bogus '-'? See
/usr/share/doc/procps-3.2.3/FAQ
Tarantella services are now available on this host.
Tarantella seems to work alright - is this something I should be
concerned
about?

Error message after upgrading to 7.3

i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Unknown error message after I click sign in from the app stort

Hello ,Excuse me if this has already been discussed.
I have been prompted to download a new version of iphoto after discovered it missing my mac pro
I get an "Unknown error" message after I click sign in from the app store to download.
I can't download and I can't find iphoto.
Have I lost all my I photos is one question I have.
Thank you

Your photos should be safe as they are in the Library.
As to the download issue: contact Mac App Store support. There's a link on the right hand side of the Store Window.

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

Warning message after generating RMM Customizing Group

Hi experts! 
 
I want to generate a customizing group in transaction sdoe_rmm01 in order to prepare the receiver generation. The generation process aborts with the following warning message: "201-Err:Metainfo FM MMW_RMM_METH_META_REG_SERVICE", Message no. RMM034. 
Although it is only a warning message, the group is not getting generated. When I want to generate existing customizing groups, the same behaviour can be observed. 
I have looked for more details regarding the warning message and it is number, but I was not successful. Has anybody an idea what the problem is? 
 
Thanks in advance and best regards, 
 
Christoph

There can be only two possibilities:
1. You did something wrong which you need to correct
2. The DOE encountered a programmatic error while generating.
No matter what the problem is, any sort of error/warning that stops generation should (atleast briefly) explain what the problem is. This one is not. So my opinion is: Raise an OSS message.
Moreover, the fact that it is referring to a 'metainfo' sounds more like a programmatic error.
Also: Search SAP Notes referring to a similiar message. Maybe its already fixed.
Cheers!

Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)

Hi! everyone,
As you can see i'm a newbie on this board, however I've frequently visited here once in a while. Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so forth since monday) see this error message after reboot my pc :
***Message starts here***
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error restart your computer. If this message appears again, follow these step:
Run system diagnostic utility supplied by your hardware manufacturer. In particularly run a memory check and check for faulty or mismatched memory, try changing video adapters.
Disable or remove any newly installed hardware or drivers....etc.
Technical information
***STOP: 0x0000007F (0x00000008, 0xF7806d70, 0x00000000, 0x00000000)
....................................... ........etc.....
****Message ends here****
As i stated before I've never seen this message before the upgrade. So, here is my configurations:
BEFORE
875P NEO-LSR w/ BIOS v. 2.0
2.53ghz 512 FSB CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb on channel 1 - 512mb on channel 3) (KINGSTON pc2700 module)
CURRENT
857P NEO-LSR w/BIOS v. 2.0
3.2ghz 800 FSB 512mb (L2 cache) CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb stick on channel 1 - 512mb stick on channel 3) (KINGSTON pc2700 module) *
* may be this causes this error message because as I read it on the discription page of the 875P NEO-LSR that it will only support DUAL channel (PC3200 type) with HT CPU. So, i suspect this may cause the problem but I havent try to rearrange my memory to one channel (1 x 2) yet.
I will greatly appreciate it if someone in here who may has experienced it before or know what all this means. Please advise

Thanks for your advise bejon2000.
Here is my situation, I just freshly installed Windows XP Pro w/SP2 prior to this cpu upgrade ...I did the os last weekend and upgraded the cpu the day or two after which is monday of this week. So, can I just do the BIOS update now with the os already inplaced ??? I assum the aswer is yes, however I just wanted to confirm before I do it, you know
I've SiSoftware Utilities 2004 installed on the system as well, and after I did the Performance Tune-Up in SiSoftware ...This is what I got
SiSoftware Sandra
Display on Screen
Device Type : Desktop/Notebook
System Summary
Analysing...
Tip 2546 : Large memory modules should be ECC/Parity.
Finished Successfully : Yes
****Mainboard Information
Analysing...
Power / Aux Temperature : 59.0°C / 138.2°F
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2505 : System does not support memory error detection. Some memory errors may go unnoticed.
Warning 2506 : System does not support memory error correction. System will stop if memory errors are found.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high.
Finished Successfully : Yes
***CPU & BIOS Information
Analysing...
Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate.
Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate.
Tip 212 : System BIOS : BIOS can be shadowed so check whether it is.
Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.
Finised Successfully : Yes
APM & ACPI Information
Analysing...
Notice 224 : SMBIOS/DMI information may be inaccurate.
Finished Successfully : Yes
PCI, AGP, CardBus Bus(es) Information
Analysing...
Finished Successfully : Yes
Video System Information
Analysing...
Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : Primary Display Driver (display) : Remove the desktop wallpaper to save memory and improve performance.
Tip 319 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Remove the desktop wallpaper to save memory and improve performance.
Finished Successfully : Yes
Windows Memory Information
Analysing...
Finished Successfully : Yes
Drives Information
Analysing...
Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : Removable Drive (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Tip 1821 : Removable Drive (H:) : Label (name) drive.
Finished Successfully : Yes
Ports Information
Analysing...
Warning : Communications Port (COM1) : Port in use. [5]
Finished Successfully : Yes
Keyboard Information
Analysing...
Finished Successfully : Yes
Mouse Information
Analysing...
Finished Successfully : Yes
Sound Card Information
Analysing...
Finished Successfully : Yes
Printer and Fax Information
Analysing...
Tip 402 : PaperPort Color : Print quality may have been set too low. Check settings.
Finished Successfully : Yes
MCI Devices Information
Analysing...
Finished Successfully : Yes
Windows Information
Analysing...
Tip 1300 : Enter your company name or "Home" instead of "Unknown".
Finished Successfully : Yes
WinSock Information
Analysing...
Finished Successfully : Yes
Processes Information
Analysing...
Tip 1601 : 6. tinhbuon0e - ********* - Winamp [Stopped] : Program consumes a large amount of memory.
Tip 1601 : Adobe Photoshop - [main.psd @ 90.9% (Layer 4, RGB/8)] : Program consumes a large amount of memory.
Tip 1601 : Adobe ImageReady : Program consumes a large amount of memory.
Finished Successfully : Yes
Modules Information
Analysing...
Finished Successfully : Yes
OLE Information
Analysing...
Finished Successfully : Yes
DirectX Information
Analysing...
Finished Successfully : Yes
Network Information
Analysing...
Finished Successfully : Yes
SCSI Information
Analysing...
Warning 2600 : WDC WD80 0JB-00CRA1 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : TOSHIBA DVD-ROM SD-M1712 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : PLEXTOR DVDR PX-716A : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Finished Successfully : Yes
Font Information
Analysing...
Finished Successfully : Yes
CMOS Information
Analysing...
Finished Successfully : Yes
OpenGL Video Information
Analysing...
Finished Successfully : Yes
Services Information
Analysing...
Tip 2130 : Alerter : Service may be disabled on Home/Professional OS version.
Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version.
Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version.
Tip 2130 : Removable Storage : Service may be disabled on Home/Professional OS version.
Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version.
Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version.
Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version.
Tip 2130 : Windows Image Acquisition (WIA) : Service may be disabled on Home/Professional OS version.
Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version.
Finished Successfully : Yes
ATA/ATAPI Information
Analysing...
Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety.
Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired.
Finished Successfully : Yes
Data Sources Information
Analysing...
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later.
Error : Tables/Views : No tables/views found.
Error : Procedures/Functions : No procedures/functions found.
Finished Successfully : Yes
Hardware IRQ Settings
Analysing...
Finished Successfully : Yes
DMA Settings
Analysing...
Finished Successfully : Yes
I/O Settings
Analysing...
Finished Successfully : Yes
Memory Resources
Analysing...
Finished Successfully : Yes
Plug & Play Enumerator
Analysing...
Finished Successfully : Yes
Performance Tune-up Wizard
Finished Successfully : Yes
There are actually some notices on MAINBOARD INFORMATION & CPU & BIOS INFORMATION, however I'm not sure what exactly they mean though.
******UPDATED*****
here is the last part of the error that i described in my first post, I just saw it again right now
****STOP: 0x.......
**** sysaudio.sys - Address F6EAA481 base at F6EA7000, Datestamp 41107F1a
Beginning dump of physical memory
Dumping physical memory to disk: (counting from 1 to 99 then it shut down the computer)

BOMBOS interface "warning" message after changes saved in the BOM.

Hello,
We our client is facing an issue, regarding BOM change / Modification in CS02.
After any modifications saved in the BOM (transaction CS02), in SLG1 transaction system gives u201Cwarning messageu201D as given below.
1.     Entry already exists in the work list
For components, system is giving following message.
2. Item material PPA_FORM_NU001 (Material number) is not assigned to a specification
We found one note for this u2013 u201Csapnote_0000893616_BOMBOS_Specification not foundu201D, this note is already applied in the program by SAP at 2005.
Because of this note, program creates the message in SLG1.
We also found that, in the IMG customization >>>
Environment Health & Safety > Product Safety > Bill Of Material Transfer > Specify Environment parameter & condition for the parameter u201CBOMBOS_WL_DIALOGu201D parameter value is u201CXu201D. If we remove this value, then system gives error message in the SLG1.
We want to know,
1.     Why we have such entries in SLG1?
2.     What is the goal of this standard BOMBOS interface?
3.     What is the impact of this warning message in the process of the transaction?
4.     To solve this, is there any solution?
Please confirm us.
Thanks in advance.
Edited by: Hemant Baviskar on Apr 27, 2009 11:25 AM
Hello, Can any body help me on this?
Thanks

Hello,
To rectify this issue, please refer the SAP Note - sapnote_0000683420 and make the changes accordingly.
Thanks
Best Regards

Error messages after upgrading kernel (devfs to udev) [SOL]

when installing the new kernel i got a message to change my menu.lst so it changed "/dev/discs/disc0/part3" to "/dev/hda3" (and nothing else) cause of udev instead of devfs.
after rebooting i get few error messages:
[after network start]
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFBRDADDR: No such device
etho0: unknwon interface: No such device

kjs wrote:I'm also having an issue after upgrading neither eth0 nor eth1 are showing up in /dev .... I think it's due to the switch from devfs to udev...
for the record - network interfaces never show up in /dev - they're not normal devices
edit: I guess I should provide some help...
ifconfig and "ifconfig -a" will list network devices (also in /proc/net somewhere). If you do not have a network device that means that your module is not properly loaded for that device.
This should have nothing to do with a devfs/udev switch and everything to do with a kernel upgrade.
Just for some more info, can you please report the output of:
· lsmod
· uname -r
· ls /lib/modules
· ifconfig -a

Cannot search messages after upgrading to iOS8!!!

After upgrading my iPhone5S to iOS8 yesterday, I noticed that it cannot search Messages for information. To be exact, it only searches messages that have been sent/received after the upgrade. It seems it hasn't cached older messages and keeps ignoring them when searching for something. Any help? Is it a bug?
iPhone 5S, iOS 8

I am having this same issue. I live in Korea and changing the language to Korean made the messages searchable, but when I changed back to English, the problem returned and I was unable to search all my messages via the search window in the messages app, but then, after about 5 minutes, the messages app crashed, and after that, the problem was resolved. Gotta sat that I'm so far unimpressed with ios 8; seemingly not ready for Primetime.

Cannot search messages after upgrading to iOS7!!!

After upgrading my iPhone4 to iOS7 today, I noticed that it cannot search SMS Messages for information. To be exact, it only searches messages that have been sent/received after the upgrade. It seems it hasn't cached older messages and keeps ignoring them when searching for something. Any help? Is it a bug?

Same problem here with 4S updated to IOS 7 via OTA.
I have solved the problem by connecting the phone to Itunes, backing up, re-installing IOS7 and restoring from the backup.
Now everything is fine and all messages are indexed.
I hope this helps!
F.

Cannot view messages after upgrade from SP07 to SP10

Hi,
we are facing now problem with ITSM - after upgrade, because of our oversight, roles for ITSM was overwriten by new versions, and when user logs into ITSM, it cannot write and even see any tickets.
Only one error message is showing - No authorisation object B_NOTIF_IB
What should we do in this situation?
After giving SAP_ALL profile, user can open ticket by entering its number, but list with this numbers is still gone.

Apologies, my mistake
please check the steps below as on the links below
Go to SA 38
Enter RDSWP_NOTIF_CREATE_CUSTOMIZE_S
Click Execute
Select the field group Component
Check the Output checkbox
Enter the default value in the Input Value field
Click Save
Setting up Defaults in NOTIF_CREATE (creating an incident message)
Defaults in Support Messages - how to set them up ?

Problem in de-queuing xml messages after upgrade to 11g database

We just upgraded from database 10g to 11g. After upgrade we are facing a problem in processing xml messages smaller than 4000 bytes. Messages larger than 4K bytes are handled correctly.
We have Tibco IM/BW adaptors accessing Oracle AQ through JDBC Thin from other platforms than the DB is on.
These clients connect to the database with an application user (XXIO) which belongs to the APPS schema.
The client makes an enqueue to the queue-table XXIO_I00_I_JMS_Q_TABLE and in USER_DATA-part of the message the client specifies some header-information for the message with the actual data.
The enqueue is made with JDBC Thin 11.1.0.7 and with the aqapi.jar/jmscommon.jar-files from the rdbms 11.1.0.7-installation, so the API towards the database is of the correct version.
When the enqueue is done, the message has correctly been put into the table XXIO_I00_RT_I_JMS_Q_TABLE.
Now to the problem,
For example, we have a message that just has been put into the table, and it has a text_len of 3887.
The text-part of the message is put in text_lob, not in text_vc.
The problem now is that when the propagation starts
(execute DBMS_AQADM.ENABLE_PROPAGATION_SCHEDULE(queue_name => 'XXIO.XXIO_I00_RT_I_JMS_Q'),
the code for dequeue and move of the message, assumes that the text is in text_vc when text_len <= 4000 bytes.
Since that's not the case, the message propably gets errored out, and is put in the errorqueue.
The length of the messages that are put into text_lob vary from 2000 and up, so text_vc seems to be used only
for messages below 2000 bytes now. This problem occurred when we upgraded the DB and client API to 11.1.0.7.
Any pointer will be helpful.
Thanks

here is the output
HOST LOWER_PORT UPPER_PORT ACL ACLID
smtp.ABC.com 25 25 /sys/acls/ACLPORTA25.xml A275C7806DD74DE38F95D7E17794803D
mqlinuxext.serasa.com 4081 4081 /sys/acls/ACLPORTA4081.xml 85ED7A539AAC4A419C828D0EC037C090
mqlinuxext.serasa.com 80 80 /sys/acls/ACLPORTA4081.xml 85ED7A539AAC4A419C828D0EC037C090
mqlinuxext.serasa.com /sys/acls/http_access_acl.xml 40C25DBC57E4476BA7906652EBD50332
Thanks a lot

Custom program - unknown warning messages after upgrade (4.6c to ECC 6.0)

Similar Messages

Maybe you are looking for