Custom Report Query - Patches install on specific computer AND date installed

I'm looking to create a 2 custom reports that show installed. I have a similar report already but it shows patches needing to be installed.
Devices in a collection with columns for total number security patches installed (I'll break them out further by severity)
Breakdown of each patch installed on a computer (from report 1) and the date installed. (may also include severity, KB article, description etc. I already have these fields)
Essentially I'm looking for the query to pull this data and add to an existing report format I'm already using.
Ideas?

Garth,
Thanks for the reply. I've flipped the 2->3 in the report and that gave me what I needed.
The other piece was the date installed. This was not in either report. I did however find it under the database view ucsa.LastStatusChangeTime which my report was already pulling.

Similar Messages

How to query in SCCM 2012 to know how many active and inactive clients in a specific time and date

Dear Everyone,
Good morning. I need to perform a query to know how many clients PCs are active or inactive during the a specific time and date (let say, today 9pm). In my query, I want to know:
1. How many client PCs is active at that time and date?
2. How many client PCs is not inactive at that time and date?
Any assistance is greatly appreciated. Thanks.

Thank you Gerry for pointing out that it doesn't show real time date. I do agree with that. However, I am look at the (at least in this) report which supposed to [description] shows a list of computers not reporting any power activity for a specified date
and time. Since I can only key in date in my selection (time option not given), I am expecting the report to show me whether there any client PCs that doesn't any power activity for the specified date. A list was generated, and a number of them shows HardwareInventoryScan,
LastHeartBeatScan and LastPolicyRequest on the same date itself. I would like to know why these appears, so that I can learn from it.
Due to the selection option given, I can't expect my original goal, but at least (hopefully) I can get to know (past event) how many and which client PCs is not powered on a particular date based on the date and collection selected.
At least by getting explainations, I hope to learn something from this (how to read this report). Thanks in advance.

SCCM 2007 Determine packages/task sequence distributed specific time and date

Hi All,
Back from holiday to find SCCM task sequences for client PCs have been pushed to servers :(
My knowledge on SCCM/SQL is somewhat limited.
Are there ways to find task sequences that are distributed specific time and date and to which collections?
Many thanks!

managed to sort this out myself.
On a affected machine, I've located a logfile 'smsts.log' in '
C:\Windows\SysWOW64\CCM\Logs', then searched for advertisement prefix.

Create a Summarized custom report having information of Client Status, Deployments and patching

Hi,
I have to create a custom report in SCCM 2012 R2. The single report will contain a summarised details of
1. Number of SCCM clients & there health.
2. OSD/Software Distribution/Client Installation performed within a period of time.
3. Patching (Report should have separate rows for different OS, application which are having ADR's & details of number of machines patched using each ADR.)
4. Create a Weekly Subscription for the Report.
Is is possible to create such a custom report. If possible then please help.
Regards
Pallavi

Hi,
>>Number of SCCM clients & there health.
The report in the blog below could help you.
Report | System Health – Configuration Manager Client
For the updates part, you could use the build-in reports in Software Updates - B Deployment Management folder for reference.
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Creating a custom dictionary so I can use specific spellings and characters

How can I create a dictionary so I can use specific spellings and characters in my document? Example: we spell numbers from one - nine instead of using the actual number 1-9. We also use uppercase ins one words always etc. Please advise, Thanks.

Just Big rules we have, this is just a small example of the big rules with in other examples below with uppercase first letter and in some cases all letters in names:
Plus Sizes
Cold Weather Accessories
Swimwear
Clearance
Sleepwear
Apparel
Accessories
Key Collection Statement
Key Item
Collection Group
Collection
Week
Event Planner
Subdivision
Catalog Outpost
Seasons
Spring
Summer
Fall
Winter
Cold
Cool
Warm
Resort
Royal Velvet Fashion Bedding
Bedding Collection
Two-Way Communication
Dress Shirts
Ties
Panties
Bras
Sweaters
Earrings
Watches
IZOD
MY COMPASS
BEST PRACTICE

Report doesn't recognize the member ID and data not displayed

Hi Experts,
we have a problem with EvDRE Input schedule or report is related to insert member function .
When the regional config is set to comma for decimal symbol and point for thousands symbol.
If the user inserts a member which includes numbers and a point.
The BPC report inserts a new line with the ID replacing the point for a comma.
1. Logon BPC Excel -and open Input Schedule . Enter Decimal Figure
     Ex : 2007.TOTAL   2222,2222
2. Send data to server and press refresh worksheet. Its aggregation in "2007.TOTAL"
3.Then I have refreshed, I enter data in in another cell and send data,all r fine now again.
4.Wait 2 to 3 minutes nothig happend in the system (BPC Exl).Then press REFRESH button.Exept TOTAL have chnaged its value after decimal place-round proces happend.
5.Press Expand All. Result looks like : Some figures from Total level disappeared,values after decimal point still rounded.
6. Send decimal figure to the server and after sending process completes. I refresh ,figure in this cell becomes rounded
7.Then I Logoff from the BPC Excel and logon back.Open the same input schedule .Values are correct again.
8. Send data --Refresh ..its working fine.
The decimal process is rounded and disappearsometimes.Please suggest.Thankyou.
Regards
Yaswant

Oh, you're providing new information. Why would you not say that to begin with?
Anyway. Does the NEW SIM card have the BlackBerry Data Plan on the SIM account? If not, then it will not connect to the BlackBerryID.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Customer report query

Hi,
I want ot find the list of customers who had no transaction in past 6 months. If I am using standard report of sales or Z reports of sales it won't bring customer with no transaction record. This requirement need to be fullfilled without ABABer as he is not available for another 2 weeks. Can I get it directly from table or any other way, please guide as it is urgently required.

Hi,
You can use the report 'S_ALR_87012172', with providing the condition account balance = 0.
Try this report 'S_ALR_87012178', with providing the balance = 0 or < 0.
regards
Vivek.

Need a query string to a specific point and zoom in a public GIS Flash document

I am working with a client's website, and have no developer access to the Flash document, only public access.
I have been given the url for a county map that is presented in an interactive Flash document.
http://68.156.95.45/newberrygis//#1
Client would like me to focus in on their specific development, which requires panning the map and zooming in.
How can I find a query string that will help me to do that?

The functionality of the GIS map was important. I was given the email for the person in charge of the map, who helped me out. It appeared that he was able to outline the road in the neighborhood that I needed to focus on. That provided a parcel ID, which in turn made it possible to focus in on the proper area. This is supposition on my part; perhaps he has other info that gave him the parcel ID.
I'm not a huge fan of Flash on other than desktops and laptops, but it is what it is, client needs to use it, I need to help the client out!
B

Custom report to work in different languages EN and ZH.

Hi,
I wrote the report which has to work on languages EN and ZH(chinese language).
It is working fine in EN, When I login with language 'ZH', the selecion screen is not displaying in Chinese language. Is there anything to do to display the selection screen in ZH language?
When I change the text elements and selecion texts in report in ZH language, it is reflecting the same for EN language as well.
Is there anything to do to solve this?
Thanks
Deepthi

Hi,
Did you maintaied the Translations for that text...
if not try this ...T.Code: SE63 and follow the below path
Translation >R/3 Enterprise> Short Texts --> S3-ABAP Texts --> REPT Text Elements
Then give the Program name as an Object Name and Chooses the languages..
There you can Translate all the required texts for that program.
Thanks
shankar

Report Painter, G/L account as characteristic and data selection

Hi experts,
I'm creating a report on report painter (grr1) and i'm using as characteristic gl account. Now i need to use gl account on selection screen too.
So for that I created a variable of set. In selection screen that field is available to set with gl accounts, but when I execute the report, is displayed all accounts. It doesn't respect the selection i've made by account.
For example in selection screen:
Account from: 1200000 account to: 12999999
I execute report and is displayed all set accounts and not only accounts in range 12000000...12999999.
How can I do that selection correctly?
Thanks in advance.
Best Regards,
Cristina Rocha

Hi RD,
At first check the release strategies for errors under the below path :
Spro-MM-Purchasing-Pur.reqRelease ProcedureProcedure with Classification -- Check release strategies.
Rectify the error and also check in CL24N.
Did u check in simulation under the below path :
Spro-MM-Purchasing-Pur.reqRelease ProcedureProcedure with ClassificationSet Up Procedure with ClassificationRelease Strategies--Relase Simulation
Regards
Ramesh Ch

Query has to display completed quarters and Data loaded month.

Hi All,
I have 2 issues in BEX .
1. I need to display data loaded month(0calmonth):
Ex: Jan 2007 data has loaded in May 2007, my query has to display for 3 months JAN 2007, Dec 2006, November 2006.
2. completed quarters : if we are in mid of 3 quarter, query has to display Quarter1 and quarter2 (completed) ,nothing has to display in quarter 3.
Thanks in advance for your inputs.

1. you mentioned data loded month... but you are pointing Calender month that data belongs to? Are you want display based on Calender Month that data belongs to (Jan 2007) or Loded Month (May 2007) or Last Loded Month?
2. create User Exit variable on Quarter or Month IO. in the User Exit Code, check which Quarter that current month belongs to? if it is mid of 3rd quarter, pass Quarter 1 and 2 (or for month 1 to 6).
hope this helps.
Nagesh Ganisetti.
REMOVED

Warned by Kaspersky that your add-ons can be used illegally by others, and therefore pose a risk to my computer and data, true?.

The security program wanted me to disable the add-ons. Has anyone else had this experience? I have selected the 'ignore' option until I can get some info.

Do you have the exact text of the Warning, and you can type about:addons into your address bar, press Enter, then click "Extensions" to see which add-ons you have installed.

SCCM report/query w/ multiple subcollections

I am responsible for multiple work centers for SCCM. For part of my job I need to pull reports for patches that show who has and does not have specific patches or updates. Currently I have to run the same report multiple times to gather
the data. I know I could consolidate the collections but that would not allow me to show the work centers the problems I need them to fix for manual remediation. I could really use some help with a custom report.
example layout
company(upper collection)
analytics (sub collection)
security (sub collection)
helpdesk (sub collection)
I need a report that will show me not only the standard installed /required data but also the subcollection that machine is in.
Can I run a report against the upper collection and either drill down into the sub collections or at least have it show the sub collection name so I can task out work needed?
machine name analytics

what do you have so far? you indicated you run the same report multiple times. Can you post what that one is? It might be (sort of) easy to modify to include details about specific collection memberships--but in order to do that we'll
have to see what you have so far.
Standardize. Simplify. Automate.

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

User details in a specific computer- Config Mgr 2012 R2

I am using SCCM 2012 R2. I need to have an option for user details on a computer in a specific collection. When I select a computer after searching under devices, I would like to see search options(attached Screen shot)
for Primary device user or other details last logon etc. related to user on that computer.
Its currently not available in the product I guess. I have also tried to enable last logon in AD discovery.
I have user affinity configured and can see these details from SCCM reports but would like to see user details when I select the computer and see who the user this belongs to rather than running and creating custom reports. Currently I am implementing
SCCM and migrating setup from an existing tool. These features are readily available in that tool.
Any help on this please.
Thanks

I've already logged something similar, back in Feb, at MS Connect website for checking deployments as would be good to see last logged in user.
https://connect.microsoft.com/ConfigurationManagervnext/feedback/details/823608/sccm-2012-checking-deployment-to-system
You'll need to sign up and join the Configuration Manager program to view and you can vote this up as an issue and add your feedback. The more votes the better ;-)
Cheers
Paul | sccmentor.wordpress.com

Custom Report Query - Patches install on specific computer AND date installed

Similar Messages

Maybe you are looking for