Custom report stored procedure changes not reflecting

Hi,
I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
Regards,
Rahul Sharma

I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

Similar Messages

UCCX 8 Custom report - stored procedure

I'm porting over a custom UCCX 5 historical report to UCCX 8. I'm trying to port the stored procedure to informix but some of the helper routines such as getRoutingSkills(), getRestrictedDate() and parse2() are all restricted and I don't have permission to grant access to the report user.
A call to one of these functions generate the error message "SQL Error (getrestricteddate) cannot be resolved."
I'm logging in to the informix database with the uccxhruser account and I don't know of any other account with elevated privilege that I can use for development.
My question is there any documentation on security requirements for creating stored procedures for UCCX 8? What do i need to do to gain access to the functions listed above? Do i need to re-create these helper routines myself?
Please advise.
Thanks
Chris

I've noticed there's a database user named "uccxuser" with privilege set to "DBA". I believe this is the account i should be using to create my stored procedures but I don't know the password to it. Does anyone know how custom stored procedures should be created on uccx 8's database and which account we should be use?
Thanks
Chris

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

Universe export - data changes not reflecting in Report

Hi
The changes and the latest updates in the database are not reflecting in reports,
even if i export the universe again.
and i have refreshed the reports, that even not reflecting.
i did Edit query and Run query this action also not bringing the latest data to reports
why this happens ?
how to solve this issue ?
Regards
Dineshkumar

You can search for KB articles on SAP Service Market Place .
Here is first :
Symptom
You make changes a local Universe in Designer.
When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
Reproducing the Issue
Using BusinessObjects Desktop Intelligence XIR2 SP3:
Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
Make a simple change to the universe (like renaming a field/ object name) and save these changes.
Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
This will not show the latest changes.
However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
Cause
This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
Resolution
In Desktop Intelligence menu, go to: Tools > Universes
Click 'Refresh'
Select and 'Import' your universe
Next, go to toolbar menu: Data > Edit Data Provider
In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
Only after following these actions will the .unv ammendments be visible in the report.
Here is second :
Symptom
Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
Environment
BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
Reproducing the Issue
Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
1. Log in to Designer
i) Import Island Resort Marketing
ii) Go to Universe Parameter >> SQL
ii)Uncheck Allow Selection of Multiple Context
2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
i) Drag the object Country in the Result's Pane
ii) Save and Export the report to the repository.
3. In Designer Change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'ddd'
Note: Uncheck Allow Selection of Multiple Context
ii) Save and Export the Universe
4. Log in to InfoView
i) View the report
ii) Refresh the report
iii) Changes to the object taken place i.e Country is concatenated with ddd
5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'eee'
Note: Check Allow Selection of Multiple Context
ii) Save and Export the Universe
6. Log out from InfoView and login again
i) View the report
ii) Refresh the report
iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
Import efashion Universe
Drag the Outlet_Lookup table into the objects pane on the left hand side
Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019)
Apply the restriction to Administrator
Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
Create a new Deski report
Drag the object state from the Outlet_Lookup table to the Results pane
Observed that the administrator is able to see only Texas which is expected behavior
Save and export the report
Log in to Infoview as Administrator
View the report. Refresh the report
Observed that the administrator is able to see only Texas which is expected behavior
Log in to Infoview as any user say Test User
View the report. Refresh the report
Observed that Test User is able to see all the states which is expected behavior
In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
Save and export the Universe
Log in to Infoview as Test user
View the report
Refresh the Report
TestUser is able to see only Texas which mean that the restriction is applied to Test User also
Cause
This is by Design as the 'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
Resolution
Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Explanation:
If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Explanation:
The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
Explanation:
We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

Report with Stored Procedure does not return until refresh

I'm using RAS server 2008 to run many Crystal reports from a web application (TrackWise) over Oracle 10g DB.
A new report is using a stored procedure that takes several minutes (5-10) to return before the rest of the report's SQL can execute.
When running the report from Crystal Developer there is no problem,
but when running from the application (using the RAS), the report seems to be running forever,
However, if you wait a few minutes for the DB utilization to drop (i.e. for the stored procedure to finish) and refresh - the full report appears on the screen in a second.
Since I have many other reports that run for much longer time with no issue, I assume that this has nothing to do with the web application, but rather related to the connection between the RAS and the DB (i.e. the idle time between the beginning of the stored procedure execution to its return and the continuation of the report creation).
I assume that I need to change one of the RAS settings/ parameters (in the properties or in the registry), but which?
Please assist.

Since this app is from TrackWise, I'd recommend contacting TrackWise and see if they have an answer for you. As it is, we have no idea how they implemented the CR components in their app. If they cannot help you, it should be them coming here and asking us - or better yet they should be creating a phone incident.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Fields in Stored Procedure does not appear in Crystal reports 2008.

hi,
I am now using crystal reports 2008 evaluation copy for 30 days. I am trying to create a stored procedure with parameter, here is my sample Stored Procedure code;
DELIMITER $$
DROP PROCEDURE IF EXISTS `puerto`.`SP_FindEmployees`$$
CREATE DEFINER=`root`@`localhost` PROCEDURE `SP_FindEmployees`(SIDNo VARCHAR(10))
BEGIN
SELECT * FROM employees WHERE IDNo=SIDNo;
END$$
DELIMITER ;
when i try to call the procedure in sqlyog here is my sample code;
CALL sp_findemployees('0000000001')
it is successfull, but when i try to connect it with crystal reports 2008 I got no fields in my stored procedure andi got this error message ;
"Database Connector: 'HY00:[MySQL][ODBC 3.51 Driver][mysqld-5.1.33-community]incorect number of arguments for procedure puerto.sp_findemployees; expected 1, got 0 [Database vendor code: 1318]"
CR2008 was not asking a parameter values.
But when I try using stored procedure that i've made in MSSQL, CR2008 asking parameters and succefully created the reports needed.
My Objective is to make a stored procedure in MySQL by using select statement and filter it with parameter(s) that I will pass and CR2008 will use this stored procedure.
i also try the view with this code below and it was successfull in CR2008.
DELIMITER $$
DROP VIEW IF EXISTS `puerto`.`ep_employees`$$
CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `ep_employees` AS (SELECT `employees`.`IDNo` AS `IDNo`,`employees`.`FullName` AS `FullName` FROM `employees`)$$
DELIMITER ;

hi,
Crystal Reports 2008 and MySQL 5 , ODBC driver 3.5 and ODBC driver 5.1.
I use ODBC connector 3.5 because I got errors in ODBC drivers in 5.1.
Do you have step by step procedure for creating add command dialog box?
I try creating the add command dialog box
here's my sample sql statement i don't know if its correct because no data appearing in my crystal report
Select * from employees where idno=@IDNo
in Command Parameter Dialog Box
Parameter Name = @IDNo
Prompting Text = @IDNo
Value Type = String
DefaultValue = 0
thanks!

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

Report changes not reflected in Portal

Hi,
I have a report designed in Business Intelligence Front end tool. I have added that report to a role created in BI backend and assigned the report to that role. I am executing the report in Portal through SSO and the report is executing successfully.
I made changes in the report and assigned it to the role again. When i execute the report in portal, the changes are not reflected. But when i check the same report in Portal using another team mate id, he is able to see the changed report. We checked the iview of the report in portal and the changed report is there in portal. But i donno why it is not showing up for me. We cleared the Browser cache and checked again but the result is same. We both have the same roles, so nothing to do with the Roles. I think the problem is in portal, but dont have an idea on where to check it.
Help me in this regard. Thanks for your time.
Regards,
Murali

Hello Murali,
This is strange but please do this simple test & confirm:
Run the iView using your colleague's id. Copy the complete URL from the browser.
Open another fresh browser session, pasting the URL login using your credentials.
What do you see now? Do you see the change?
This a simple method to filter out the issue..whether its related to backend or not.
Awaiting Reply.
Regards,
Ritu

Custom Report - Show Deployed, But Not Installed, Security Updates

I'm trying to create a custom report that will show all patches that have been deployed, but have not been installed for a particular collection. Any ideas?

Answered my own question.
This will pull all Security Updates that have been Deployed but are still Required (not installed) for the All Systems collection (SMS00001). You can directly modify the code to limit it to the All Servers or All Workstations depending on your site code. You
can also change the CategoryInstanceName filter to see different Update Classifications.
select distinct
sys.Name0,
ui.BulletinID as BulletinID,
ui.ArticleID as ArticleID,
ui.Title as Title,
catinfo.CategoryInstanceName as Vendor,
catinfo2.CategoryInstanceName as UpdateClassification,
CASE ((ui.IsDeployed))
When 0 Then 'No'
Else 'Yes' End as 'Deployed',
CASE((ui.Severity))
When 2 Then 'Low'
When 6 Then 'Moderate'
When 8 Then 'Important'
When 10 Then 'Critical'
Else 'NA' End as 'Severity'
from v_UpdateComplianceStatus css
join v_UpdateInfo ui on ui.CI_ID=css.CI_ID
join v_R_System sys on css.ResourceID=sys.ResourceID
join v_ClientCollectionMembers ccm on ccm.ResourceID=sys.ResourceID
join v_CICategories_All catall on catall.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo on catall.CategoryInstance_UniqueID = catinfo.CategoryInstance_UniqueID and catinfo.CategoryTypeName='Company'
join v_CICategories_All catall2 on catall2.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo2 on catall2.CategoryInstance_UniqueID = catinfo2.CategoryInstance_UniqueID and catinfo2.CategoryTypeName='UpdateClassification'
where css.Status=2
and ccm.CollectionID='SMS00001'
and ui.isDeployed=1
and catinfo2.CategoryInstanceName='Security Updates'
and catinfo.CategoryInstanceName = 'Microsoft'
order by sys.Name0, ui.ArticleID
select distinct
sys.Name0,
ui.BulletinID as BulletinID,
ui.ArticleID as ArticleID,
ui.Title as Title,
catinfo.CategoryInstanceName as Vendor,
catinfo2.CategoryInstanceName as UpdateClassification,
CASE ((ui.IsDeployed))
When 0 Then 'No'
Else 'Yes' End as 'Deployed',
CASE((ui.Severity))
When 2 Then 'Low'
When 6 Then 'Moderate'
When 8 Then 'Important'
When 10 Then 'Critical'
Else 'NA' End as 'Severity'
from v_UpdateComplianceStatus css
join v_UpdateInfo ui on ui.CI_ID=css.CI_ID
join v_R_System sys on css.ResourceID=sys.ResourceID
join v_ClientCollectionMembers ccm on ccm.ResourceID=sys.ResourceID
join v_CICategories_All catall on catall.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo on catall.CategoryInstance_UniqueID = catinfo.CategoryInstance_UniqueID and catinfo.CategoryTypeName='Company'
join v_CICategories_All catall2 on catall2.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo2 on catall2.CategoryInstance_UniqueID = catinfo2.CategoryInstance_UniqueID and catinfo2.CategoryTypeName='UpdateClassification'
where css.Status=2
and ccm.CollectionID='SMS00001'
and ui.isDeployed=1
and catinfo2.CategoryInstanceName='Security Updates'
and catinfo.CategoryInstanceName = 'Microsoft'
order by sys.Name0, ui.ArticleID

Develop Module changes not reflected on screen

I have used LR for about 3 years and have never had an issue with it. I am using LR 5.7 64 bit. I have a Win7 Pro machine with 8 Gb of RAM and 2 TB drive that is 50% free. I do not have PS and I am not a Creative Cloud customer. Yesterday I started having trouble in the develop module. None of my changes are being reflected on the screen.
It almost seems that the window never changes from the image preview to the live image. When I try to zoom the image gets very pixelated (goes back to my theory I am still looking at the preview). I can zoom in library mode and the image zooms correctly.
If I leave develop module and go back to library the changes are reflected. I have 2 catalogs, both are effected. I tried creating a new catalog and the problem still exists. When I try to use the crop tool the screen goes completely white (or black depending on background color).
I have tried all of the steps in the basic troubleshooting. I have tried uninstalling and re-installing.
Has any one seen this behavior? Any ideas how to correct?

I have solved this problem by uninstalling the DirectX drivers and re-installing them.

TLN changes not reflecting

Hi All,
I have a requirement of customizing the TLN. I am modifying the CSS file from the toplevelnavigation.par in NWDS and then created an iView . But the changes done in CSS are not reflecting in portal's TLN.
What can be done to see the changes ?
Thanks,
Nishant Singh

hi,
are you gettting any error at time of execution or your modifications didn.t effecting the TLN?
did you check with the iview's preview.is it working fine? upload yor modifiedpar file with different name or (make a copy of you origina par file) cretae an ivew with modified par and check whether you are getting desired output and then you assign it to framework page.there may be a error in the CSS or mogified jsp file coding
Regards
Mahesh

Migrating DESKI Reports (Stored Procedures) from 6x to XI 3.1

I am migrating DESKI reports based off of Stored procedures from a 6x environment to XI 3.1
I have created a new OLE DB connection pointing to the new SQL server.
I need to find out how to point my report to the new connection.
I have seen in that in case of DESKI reports using universes, I can go to Data Manager --> Definition tab and point to my new universe there.
But in case of stored procedure report, that option is not available.
Can someone let me know how to go about migrating these reports which are pointing to Stored Procedures.
Thanks

Note that I have never done it.
But I heard you could create a new universe with a derived table. In the SQL of the derived table you can call the stored procedure. The connection of that new universe is your stored procedure connection.
Build you report with that new universe, using the derived table.

Type defs changes not reflected in block-diagram constants?

I'm struggling with strict type-defs today.
If I create a strict type-def, say of a cluster with an enum in it, and save it. Then create a block-diagram constant from the strict type-def in a blank vi. Then make changes to the strict type-def (say, add another item to the enum), the block-diagram constant ghosts out , as it should. If I then select "Apply changes" from the strict type-def menu, the ghosted block-diagram constant becomes un-ghosted, as it should. BUT, it hasn't update!? If I look for the new item in the enum, it isn't there!? I'm sure it should be, right?
No changes that I'm making to my type-defs or strict type-defs are being reflected in my block-diagram constants (which are definitely still linked to the controls with "Auto-update from type-def" checked on). It does work for front panel controls and indicators though - just not block diagram constants.
I'm using LabVIEW 8.5.1, Win XP Pro. Any ideas anyone?
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Solved. I think.
I tried a range of type-defined controls, including an enum, a ring list, a cluster with an enum inside it, and a cluster with a ring list inside it.
Changes to the enum items were reflected in all vi controls and block diagram constants.
Changes to the ring list items were not reflected in the controls or block diagram constants.
This snapshot shows the the last item available in each ring and enum list. Clearly the rings were not updated when the custom controls were. (Yes, I applied changes and saved too).
Switching to strict type-defs only impacted the front panel controls, as Ben highlighted, because this is GUI related. You can see from this second snapshot where all type-defs are now strict type-defs that all enums and rings updated to reflect all three items, but the block diagram rings are still out of date
I expect somebody will tell me now that this is normal behaviour???
Message Edited by Thoric on 09-10-2008 02:31 PM
Thoric (CLA, CLED, CTD and LabVIEW Champion)
Attachments:
custom_control_test.jpg ‏53 KB
custom_control_test_stricttd.jpg ‏54 KB

Theme changes not reflecting in Consumer EP7.02 portal.

Hi Experts,
We are in CE7.2(Producer) fedarated with Enterprise portal 7.02. We are using custom theme and modified the font color for disabled field property from #999(grey) to #000000(black) in consumer portal. The changes are not reflecting in consumer portal. We have tried modifying the Master head and its reflecting as expecting. Even after that we cleared the cache and did restart both the servers as well. Still the changes are not reflecting.
Please provide your inputs, it will be great helpful for us.
With Regards,
Ramesh G.

Hi Ramesh,
Please copy the custom theme folder and paste it in the following path in the consumer server:
<Drive_name>:\sap\<SID>\JC<Instance_Number>\j2ee\cluster\server<Node_Number>\temp\webdynpro\web\sap.com\tcwddispwda\global\SSR\themes
Thanks
Gautam Singh

Changes not reflecting in SRM screen

Hi,
As per my requirement, I have to add a custom field in the SRM Url..Shopping cart (Ship-to address subscreen) . Hence I have added the field in the program (saplbbp_sc_ui_its) in the screen 310 and added the code in the corresponding HTML template(saplbbp_sc_ui_its_310)..in ITS---- BBPSC01
But still the changes are not reflecting in the SRM URL screen.
Please anyone suggest me do I need to do any more adjustments/changes other than these, as I am very much new to this.
Can anyone suggest me the steps to perform and get the above results.
thanks,
Rakesh.

Hi Rakesh,
To add a custom fields on the shopping cart field you need to follow the steps given in the below mentioned OSS Note:
Note 672960 - User-defined fields 2
You can also go through the following blog for the steps to add a custom fields on the shopping cart screen:
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
Hope this helps.
Thanks,
Pradeep

Custom report stored procedure changes not reflecting

Similar Messages

Maybe you are looking for