Custom Reports in MSS Reports iView

I've looked all over for the answer to this. I've pulled a custom report through the MSS Reports iView, however, the selection criteria (personnel numbers and orgs) are not being passed. The custom rpt is being displayed at the selection screen for the custom rpt. Do I have to do something additional on the custom rpt, like remove the select screen? Is there something I'm missing in the config for the iView? Thanks!

check these links
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">Help link</a>
Hope this helps.
Warm regards,
Sudhir

Similar Messages

Error in MSS Report (Using MSS Reporting Launch Pad)

Hello,
I'm currently using the convert manager's desktop data to MSS report launch pad for the portal.
When trying to run the report in MSS, I'm getting the error below:
"Error in Manager Self Service. When calling the report, the following error occured. Error when executing query Z_ABCD." This is from an SAP Query report and I could not determine what caused this error.
Have anyone encounter this and if you are able to resolve it?
Any information would be greatly appreciated.
Thank you,
Tam Ly
County of Sacramento

hi,
Go to transaction RSCUSTV27 and check if any standard template is maintained.
Use
In this activity you can make the following settings (for systems with a Release higher than SAP BW 3.x):
You can set your own Web template as the standard Web template for ad hoc analysis.
You can set your own Web template as a standard Web template for BEx Broadcasting.
You can set a Web template that is used during BEx Broadcasting for queries for generating documents.
You can specify a Web template that is used during BEx Broadcasting for enterprise reports.
You can set your own Web template as a standard Web template for reports.
Standard settings
The delivered standard Web template (0ANALYSIS_PATTERN) is used for ad hoc analysis.
The delivered standard Web template 0BROADCASTING_TEMPLATE is used for BEx Broadcasting.
The delivered standard Web template 0QUERY_TEMPLATE_BROADCASTING70 is used for broadcasting queries.
The delivered standard Web template 0REPORT_TEMPLATE_BROADCASTING is used for broadcasting reports.
The delivered standard Web template 0REPORT_DEFAULT_TEMPLATE is used for executing enterprise reports.
Activities
To set your own Web template as a standard Web template for ad-hoc analysis, enter the technical name of the Web template under Ad-hoc Analysis. If you do not specify anything, the delivered standard Web template (0ANALYSIS_PATTERN) will be used for ad-hoc analysis.
To set your own Web template as a standard Web template for BEx Broadcasting, enter the technical name of the Web templates under Broadcasting.
To set your own Web template as a standard Web template for BEx Broadcasting for queries for the generation of documents, enter the technical name of the Web templates under Query Precalculation.
To set your own Web template as a standard Web template for reports, enter the technical name of the Web template under Enterpr. Reports.
Note that if you change settings, you have to restart the J2EE Engine before the changes become effective.
Regards,
Kams

SSO for MSS Reporting doesn't work

Hello Experts!
I've a litte Problem: When a Portal-User (Manager) wants to call a Report from MSS Reporting, there comes a litte popup where he has to fill in his logon data for the HCM-System (target system).
I have already imported the certificates from Portal into the target system (Transaction strustsso2) as describes in this weblog (Connecting SAP systems to Enterprise portal with SSO.). The portal user and HCM-System user names are indentical, too.
do you have any suggestions?

Hi Matthias,
Let me know which version of MSS and HCM system are you using. I assume that your you are using saplogonticket in the system property.
Few questions:
- Is that appearing for all the screens or applications in MSS business package ?
- Are you using the standard SAP business package or have you customized it ?
- As mentioned in your message, you have imported the certificates but have you added them to ACL and set the value in 2 parameters login/create_sso2_ticket and login/accept_sso2_ticket and restarted the target system (HCM system) ?
Regards,
Sunil

Mss reports - add module pool (dialog) to the list

Hi experts,
I need to add new reports to MSS reporting.
Is it possible to add module pool (dialog) to the MSS reports list?
I got an error when executing the program " no object stored within selected period".
The portal seems like it cannot trigger the data from backend.
Is it related to dialog program that we use?
What is the best solution because we need the manager to choose from dropdown button through the MSS reports.
Rgds,
Nanie Arianie

Solved
Program error

MSS reports - Report to convert MDT to LPA table entries shows blank

Hi experts,
I need to add new report to mss reporting. I already transport the program and configuration to QAS server. It works find in DEV portal. But it shows error ' no object found' in QAS. I found that when I run T-Code PWPC_Conv_MDT_TO_LPA it shows blank in the screen.
Is it the cause of this problem? Correct me if I'm wrong. What should I do?
Thanks,
Rgds,
Nanie Arianie

Hi,
In the following screen its been shown perfectly
go to Tab ...MSS
ESS / MSS Configuration (SAP Best Practicesfor SAP HCM V2.600) (N06)
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.do

Is it possible to take a print from MSS Reporting

Hi all,
Is it possible to take a print from MSS Reporting ?
When I execute a report from the MSS reporting a pop-up is open with the report result.
I need print out this. To do it, I click on Menu > Print and choose the WINPRINT in Output Device.
The message "Spool request (number 0000009418) send to sap printer WINPRINT" appears and the adobe reader open with a error message below.
"the file doesn´t start with '%PDF-'"
I can see the spool in SAP backend (SP01) with status "Compl." but I the printer is not print anything.
How I can print out a report from MSS Reporting ?
Cheers,
Silvio Galery

Please check the Note 351230, check out the recommendatins as listed

Custom reports in MSS

Dear SDN Community,
Can you please tell me how do I get the custom R/3 reports into MSS iviews. Do I need to customize anything in R/3 if I want to pull an existing R/3 report into portal. What are the MSS iViews that I should work here. I have no BW or any other custom reports but just R/3 custom reports.
Thanks!
Vivek.

check these links
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">Help link</a>
Hope this helps.
Warm regards,
Sudhir

MSS reports displaying Employee Information iView

Hi all,
I'm currently working on MSS project where I'm trying to show reports on MSS portal.
I have done the neccessary configurations regarding tables:
T77MWBS (Manager's Desktop Senarios)
T77MWBFCD (Function Code Definitions)
T77MWBFCO (Object-dependent Function Codes)
T77MWBFCH (Function Code Hierarchies)
and also converted MDT data to MSS Reporting Launch Pad using RPT0 senario.
The reports are showing in the MSS portal but when i click on for instance Birthdays, a new window pops up showing Launchpad for Reports page but I'm not able to define selection criteria i.e. select an employee from a list but instead I'm redirected to General Information page where General Data and Personal Data iViews are displayed. I clicked the Options button on the popup window to view Details and I'm able to see:
Portal Components: com.sap.portal.wdintegrator.WebDynproIntegratorPage
Object ID: pcd:portal_content/com.customer.customer_content/com.customer.customer/com.customer.roles/com.customer.mss/com.sap.pct.erp.mss.general_information
A theori i have is that Launchpad for Reports is redirecting me to General Information page and maybe the issue lies here. If that's the case, where do i change the pcd path to the correct Launch pad?
I'm missing some configuration but can't seem to figure out what.
Now, I'm hoping for you experts to guide me and show me the way to a successful and working portal solution.
Points will be rewarded to helpful answers.
Thanks in advance.
Regards,
Messay
Can somebody please help me with this issue, it's urgent!!
Edited by: Messay on Dec 1, 2011 11:09 AM

Hello,
Yes, you can build a WDA application to pick up the events from the WDJ application if and only if the events are portal events - quite a few of the WDJ apps actually share information through using a common component - not events.
I would also check however, that there is not an easier way of picking up which employee has been selected - you may be able to within the RFCs that are being called add an enhancement to export the selected person to a shared memory object, which could be read by the WDA component.
I've used this in the past to allow a WDA report to be launched from a WDJ application - taking the details of the selected item (in particular this was for WDA reporting on MSS ECM).
Not sure what you mean with respect to the eventing of the FPM.
You cannot include a WDA component as a Java FPM VC - so there is no way of having the WDA within your Java FPM application - events you raise to the FPM are only handled within the application.
An alternate approach is to use the OADP views for selection and configure the columns to have links that open new windows, use the proxy class of the HPF link to embed in each link the personnel number of the employee selected - pass this as a URL parameter to the new page, this can then be picked up by both WDA applications.
Hope this helps,
Cheers,
Chris

MSS Reports iview is not working

I can see a list of reports in MSS but when I click on any of the report, nothing change, it seems like it processed, then it present nothing on the screen. No error message, no report. I have configured the backend and I wonder if there is something that needs to be done on the portal or something is wrong with my configuration. I have done the following R/3 and portal config, can someone please let me know what else I need to do to make it work?
1. Created a new MDT scenario ( PM --> Mgr's DT --> Customer Adjustment -->
Define scenario-specific settings --> Define application scenario:
ZSS0 Manager Self-Service - Reports
SAP_MANG MAC_PICTURE
2. Under Define Standard Scenario, I also put the new scenario ZSS0 -
Background pict. MANAGER SELF-SERVICE - REPORTS
Enterprise log SAP_MANG
Skip initial screen
Hide virtual root
Reorg. not permitted
3. Under PM --> Mgr's DT --> Customer Adjustment --> Determine views of
organizational structure - T77MWBD (I can send you the table output if that helps).
4. Under PM-->Mgr's DT --> Enhancement of Function Codes -->Define Structure of
Function Codes....(T77MWBFCH)I can send you the table output if that helps).
5. Also table T77MWBFCO - I can send you the table output if that helps).
Portal config:
1. On the portal - I have entered ZSS0 in the properties of the Reports Iview.
Please let me know what I am missing..... Thank you very much for your help.

Hi,
May I suggest you to look to the iView documentation : <a href="https://www2.iviewstudio.com/sdn/catalog/index.cfm?action=doc_links">https://www2.iviewstudio.com/sdn/catalog/index.cfm?action=doc_links</a> or <a href="https://www2.iviewstudio.com/support_content/_16271/MSS_60_1_EN.pdf">https://www2.iviewstudio.com/support_content/_16271/MSS_60_1_EN.pdf</a>
Note that most of the iviews need to be on the same page as the "Team Viewer" iview
Kind regards

Customizing MSS reporting selection period dropdown list

We have diffrent ABAP programs that uses the PNP logical database and we want to customize the period selection dropdown list on the MSS reporting iview. In same scenarios we want to display only 'Today'. In these scenarios we use the report together with a variant.
When the user execute the report, the selection period on the variant is used and that is 100% correct. The problem is that the user change the selection period on the frontend (on the Iview) and this is not what is reflected on the output of the report, becasue the report uses a variant.
Therefore we want to customize the period selection dropdown list on the Iviewin the scenarios where a report uses a variant.
I know that we cannot customize the perido selction on the Iview, beacue we cannot set the properties on the Iview.
Is anybody familiar with how we can accomplish this.
Regards
Margariet
<< moved by moderator - check out the list of other forums on top of portal forum >>
http://forums.sdn.sap.com/thread.jspa?threadID=1239838&tstart=0
Edited by: Anja Engelhardt on Feb 9, 2012 11:42 AM

Hi Darren,
We do have a property in the iview for which you can set the period. You need to know the name of the property. Give us the iview name so that we can have a look.
Cheers,
Sathya

Bypassing selection screen in custom reports added to MSS reporting

I have created a custom report (using PNP) in R/3 and added it to the MSS reporting (not Launchpad). Even though the manager is selecting his subordinate employee and clicks report result, he still sees a selection screen which i have defined in the custom report.
When the manager runs a sap standard report RPTABS50, he sees data of the employee only he selects.
How do i bypass the selection screen in the custom ABAP report i have added to the MSS?
Thanks.

Has to take an alternate approach. Picked a standard report by SAP and modified to our requirements.

MSS Reports - Config done but no show on reports selection IView

Hi there,
I configured T77MWBFCH, and T77MWBFCD for the MSS reports.
For some reasons, if I modify a standard existing entry, the change appear in the portal, but if Itry to create a new NODE and REPO, it does not appear in the reports selection IView on the portal.
Any idea?
Thank you!!
Genevieve

Hi Genevieve,
Can u share with us how u resolve this issue.
Thanks,
Rgds,
Nanie Arianie

MSS Reporting Workset : Selection Criteria iview

Hi All,
We have a requirement to not allow the Selection Criteria iview of MSS Reporting workset to get displayed, when the user selects a specific report from Reports iview.
Any pointers regarding the issue would be of great help.
Thanks in advance,
Anupama

It is not possible to avoid the display of Selection Criteria view at the call of a report that is part of MSS Reporting Workset.
The report was called in different workset
Edited by: AnupamaD on Nov 22, 2010 11:19 AM

No reports displayed in MSS Report Launchpad

Hello everybody,
We set up ESS/MSS on a distributed environment.
Backend:
     ECC 6.0 EhP 3
     Single-ABAP Stack
     Installed Backend Component EA-HR 603
     Activated Backend Function EA_FIN_1
Portal:
     NW 7.0 SPS 17
     Single-Java Stack
     Installed Components: SAPPCUI_GP 603 SP4, SAP_ESS 603 SP3, SAP_MSS 600 SP15
Problem
The configuration works fine for a couple of ESS and MSS iViews and pages, but we get the following problem with MSS Reports:
-> When calling the Launchpad no reports are displayed and an info message is shown telling "No objects were personalized".
-> When clicking on "Change Launchpad" you see several reports sorted in groupings. They are already listed in the table of shown reports but are not displayed in the launchpad.
-> When clicking on "Save and Exit" you get two additional info messages telling "No Applications entered", but no reports are displayed. When you then open "change launchpad" screen again the reports totally disappear from table of shown reports.
Portal Launchpad Configuration:
-> pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.common
-> The launchpad iView connects to the backend via SSO which works fine for a lot of other ESS/MSS iViews
-> As application parameters the following is configured: "class=CL_FPB_SNI_ACCESS&role=MSS&instance=REP&display_external=X"
Backend Customization:
-> When launching transaction "fpb_launchpad_cust" with role MSS and instance REP you can see all the reports which are displayed in "change launchpad" screen.
-> All the reports are Transaction Reports
-> The Manager's Desktop (MDT) is not used
So:
1.) Why are the reports not displayed in the launchpad, but in the "Change Launchpad" screen?
2.) Did we forget any customizing?
3.) Why do we see such info messages like "No objects were personalized"?
4.) And what refers the application parameter "class=CL_FPB_SNI_ACCESS" to?
Please help me,
Dennis

Hi everybody,
finally we managed to fix this bug on our own.
We set up the Managers Desktop (MDT) as suggested by SAP. But the MDT's reports could not be converted to the launchpad.
Then we recognized via debugging that for any reason the following entries were missing in table FPB_LP6_SNI_REQ:
- Role ROLE C 3 MSS
- Instance INSTANCE C 3 REP
Adding these entries manually fixed the problem.
Regards,
Dennis Bohlmann

Creating Reports in MSS

When looking at SAP Help it talks about specifying which reports can be selected by the manager in the Reporting iView. In Customizing for Managers Desktop (MDT), you therefore create an MDT scenario that defines a list of reports to be offered for selection.
However, we have no reports that have been configured in MDT? Do we need to create some reports for use in MDT so we can use reporting in MSS?
Or is there another way of configuring reports in MSS?
Thanks
MN

Dear King,
Please execute this steps before the executing the steps i have mentioned above, this will activate the reports used for MSS. Then gofor moving the unwanted reports unactive folder. Just what you have to do it select the unwanted report and move it down to the inactive folder.
1.     In the SAP HCM System choose:
SAP Easy Access Menu
Transaction     SE38
2.     In the ABAP Editor: Initial Screen enter the Program FPB_LP_WRITE_ENTRIES and choose Execute.
3.     In the Report FPB_LP_WRITE_ENTRIES screen select the MSS Reporting and MSS with Folders options and deselect the checkbox Test Run.
4.     Choose Execute. The sample entries are entered in the Report Launchpad in the portal.
5.     Log on to the portal with User manager1 and check if the sample entries are displayed.
6.     In the ECC system leave the transaction and go back to the SAP Easy Access Menu.
7.     Enter transaction PWPC_CONV_MDT_TO_LPA in the Command field.
8.     In the Report to convert MDT table entries to LPA table entries screen, enter the MDT Scenario RPT0 and deselect the Test run checkbox.
9.     Choose Execute. The list in the next screen shows the reports which have been added to the Report Launchpad.
Do not forget to select MSS with Folders for the FPB_LP_WRITE_ENTRIES report. Otherwise you may get short dumps while editing the report launchpad, because the reports coming from the Manageru2019s Desktop do not have folders.
Regards,
Rajasekar

Custom Reports in MSS Reports iView

Similar Messages

Maybe you are looking for