Custom resizing images when printing in Elements 11

Hi friends .... I could use some help ... When I was using an older Photoshop version ...I could select "print with preview" and there I could adjust the size and proportion of the image to the paper size - I would see the paper in a preview box and could adjust the image by sliding the box at the corner points and size the image any way I wanted ... and could see the actual preview of how the image could fit on the paper .... in Elements 11 - even if I do a PDF and print in Preview- there's no way I can see to do that ... I only see options for set sizes- even under the custom sizing menu ... I'm using exactly the same printer that I used with Photoshop - so I'm assuming this is a limitation with Elements ... I don't even see the option in Elements printing to change the image percentage as I've been used to with any other page setup before .... Please give any advice - this is making printing exactly what I want pure guesswork and is very difficult for me ...there must be something I'm missing when I print with Elements 11 .... thanks for any help ...
David

Oh yes it has Barbara. David is right. Have a look at Elements 5. I got that free and would still be using it if I hadn't had to upgraded to Windows 7. I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments. I used that printing option almost exclusively for printing cards and I bitterly regret not having it now. I'm very disappointed with these printing options in Elements 11. The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson. I have seen it in screenshots, so I know that it is there. It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever. In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

Similar Messages

Green or blue hue when printing in Elements 11

I get a green or blue hue when printing in Elements 11. Printer color control is off. Need help to eliminate color hue when printing.

Oh yes it has Barbara. David is right. Have a look at Elements 5. I got that free and would still be using it if I hadn't had to upgraded to Windows 7. I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments. I used that printing option almost exclusively for printing cards and I bitterly regret not having it now. I'm very disappointed with these printing options in Elements 11. The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson. I have seen it in screenshots, so I know that it is there. It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever. In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

How Do I Center an Image for Printing with Elements?

Elements 9 and 11: When I select "center" in the printing que the printed image is always shifted to the left of page center.
What am I doing wrong? New computer, new printer, and Elements shifts the image to the left!!
I downloaded the Elements 11 trial version to see if that would fix the issue but it does the same thing!

My original problem:
--> 3 elements in a panel, a title image
(JLabel topImage = new JLabel(new
w ImageIcon("WelcomeTitle.jpg"));), a button,
and a bottom image. I wanted the title image at the
top, the bottom image at the bottom, and the button
in the middle. I tried this with a BorderLayout, the
top image being Border.NORTH, the bottom Border.SOUTH
and the button Border.CENTER, however the button
completely filled its panel and was really ugly.
add the button to a JPanel and add the panel to CENTER.
Cheers
DB

CS5 cropping A4 dimension images when printing with Artisan 1430

Image dimension: 297mm x 210mm
Printer settings: Borderless, A4 297mm x 210mm
Adobe printer settings: Printer manages color management, No centre, No fit to page
Result: lower portion of the image is cropped.
Adobe printer settings: Printer manages color management, centre image, No fit to page
Result: lower portion of the image is cropped.
Adobe printer settings: Printer manages color management, No centre, fit to page
Result: lower portion of the image is cropped.
When printing same image from paint 6.1, the entire image is printed to a borderless A4 page.
Please assist

For problems with full Photoshop it's better to post in the Photoshop forum. This forum is for Photoshop Elements, the consumer version:
http://forums.adobe.com/community/photoshop/general

Inverted images when printing pdf to Universal PDF driver

Our company is beginning to use SSGD with two Windows XP instances (via RDP?). We deal largely with pdf forms that contain black & white bitmap image data. Within the SGD Windows instance, the pdf opens fine in Adobe Reader. Printing to any of the local printers configured on SGD is also fine. When printing to either of the Universal PDF print drivers (Printer or Viewer), however, the image portions of the document show up on the client side with inverted black/white.
This occurs only for images embedded in the pdf. If I print the image as a separate bitmap file, it comes out fine on the client side.
Any ideas?
-dan

what version of SGD and what version of Ghostscript do you have installed on the SGD server?
$ tarantella version
$ gs -V
it may be that you have an older version of Ghostscript or not all the proper fonts installed
http://docs.sun.com/source/820-6689/chapter5.html#d0e26763
another thing to test is how the PS print job looks like before it gets converted by Ghostscript. You can pause the printing on SGD 'tarantella print pause' then look for the PS file on your Windows XP instance (c:\TEMP) is the usual location of the file. See if it is not being rendered properly. If it is not, then you would want to choose a different driver to use
http://docs.sun.com/source/820-6689/appendix1.html#d0e49203
try another driver and see if that makes a difference.

Missing images when printing to pdf from Word

When printing to pdf from MS Word 2003 in some cases textboxes and/or images disappear in the target PDF, depending on their position.
Word and Acrobat Standard are the latest updates. If the Word text is converted on a Mac the target pdf has the images present, so it looks like it's a Windows only problem. Any suggestions where to start looking for a fix?

You may have to turn on "display large images" in the preferences.

Double image when printing labels

I am copying in a graphic for Avery round labels. Everything looks fine on the screen, but when printed, some (not all) of the labels have the image, plus a smaller version of the image on top of it. Kind of like an inset. I have reloaded the printer software (I have an HP Photosmart c8180 All in one), used old avery forms, downloaded new avery forms, and a host of meaninless other things. Any suggestions would be most welcome.

Hi, have you tried using another program to print the image?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Missing images when printing (in Word)

I am wrapping up a very long report for a client, and have inserted a number of color images (JPG). I cannot for the life of me get them to print. They show up just fine in the print preview, but nothing actually shows up on the paper when I actually print the document. I have checked every setting I can think of, but nothing seems to be off. I have tried converting to PDF, but the images are missing in those, too. I've also tried converting to a DOC file (rather than the current DOCX version)-- also a fail. Does anyone know what the trick is to getting images to print in Word??? I'm at a total loss and it's driving me batty.
Copying and reformatting the entire report into Pages will take FOREVER and I'm really hoping to avoid that. Help!!!!
Thanks.
Kacy

Support for Microsoft Word - Microsoft Support

Center Image When Printing PDF?

When we updated to X Pro, now when ever we print a PDF onto a paper larger than the file, it always puts the image in the upper left corner of the paper. There used to be a centering option, but now there is none. How do I get it to center the images when I print? Thank you.

Does it show full page on the screen, or a small image there also?

Lines on image when printing Raw files

Dear All
I am trying to print Raw images.
After converting and making my adjustments, I click on File > print (in the PSE editor) and then use the cursor to drag out the image to the size I want (roughly a 10 inch by 8 inch image to be printed on A4 paper). I then print it and it comes out with loads of parallel lines on the image.
Any advice to correct this?
Regards
Jon CAmilleri

Hello All
I am managing to print out raw files fine after manipulating them in canons own software (Digital photo professional) but still getting bands when using PSE 7 raw converter? Any more advice?
When sending to print in PSE a box comes up saying 'Some post-script specific settings (interpolation, calibration, encoding) will be ignored as you are printing to a non-postscript printer' This box does not come up when printing from digital photo professional. Could this be the problem resulting in bands on the image and, if so, can it be corrected?
Someone mentioned about Gamut problems - how do I alter/correct these?
Also, with Raw files, after I have manipulated them (e.g to black and white) how can I perform other tasks (eg dodge and burn areas) as it seems that PSE wont let me do this on a RAW image.
Do I have to save it as a JPEG first ? If so, what is the point in taking a RAW image in the first place if I am going to lose detail by converting it to a JPEG?
Sorry for all the questions
Regards
Jon

Cropped images when printing

Every Word document that contains a image (jpeg in most cases) gets cropped on two sides when printed, even though print preview reflects otherwise. These are not new documents and printed fine with previous printer (Epson). Called tech support and the rep was stumped although I see many posts in the forum about this.

Hi dlmott27,
Welcome to the HP Support forums. I understand that documents printed previously with another brand are not printing correctly with your HP printer.
To better assist you, would you please provide some further information:
1)       What make/model/product number of HP printer do you have? Guide to finding your product number
2)      How is the printer connected (USB cable, ethernet, or wireless)?
3)      Are you printing the documents from the same program that was used to print the documents before? If not, what happens when you print using the same program?
4)      What operating system are you using? Is it the same operating system that was running when the documents were printed previously?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Lines in images when printing from anything but iphoto

When I print on my computer from anything but iphoto the quality is horrible and the print has very noticeable lines in it across everything. I recently did a layout in Adobe Illustrator and when I went to print it on regular 4x6 satin photo paper there are lines everywhere. This also happens when printing from powerpoint, photoshop, word, and whatever else that is not iphoto. I cant send out things that are printed at such horrible quality. Everything comes out fine when i print text in black but photos look pixelated and have lines in them no matter what paper I use if printed from anything but iphoto.
HELP DR.

Check the printer manual about calibrating. There is a solution in most drivers for inkjet printers which may call like paper forwarding or so. It seems, that your printer forwords the paper a bit to much before the line is printed.

Centering an image when printing

I print cards frequently. I use the custom package option in lightroom 4 and place my main image and logo, using the red line on the grid as a guide to center the main image. It usually appears centered, but when I print, it's off just a touch - enough to look wrong. When I go back in to center it, the software clicks the image into place just a bit off - won't allow me to center it exactly. The only fix I've found is to use a border (inner stroke), which is then chopped off a little on one side, which isn't as obvious. I haven't seen anyone else ask this question, so must be missing something very obvious??? Thanks.

I print cards frequently. I use the custom package option in lightroom 4 and place my main image and logo, using the red line on the grid as a guide to center the main image. It usually appears centered, but when I print, it's off just a touch - enough to look wrong. When I go back in to center it, the software clicks the image into place just a bit off - won't allow me to center it exactly. The only fix I've found is to use a border (inner stroke), which is then chopped off a little on one side, which isn't as obvious. I haven't seen anyone else ask this question, so must be missing something very obvious??? Thanks.

Resizing images in printed documentation

I have Robohelp 10. Is there a way to resize all images to 80% when creating a word and pdf document. If I create an image style to 80%, it is ignored when creating printed documentation but works for online HTML help.

Hi there
From what I'm reading, it would seem that you are using CSS to present images at 80%, no?
If that's the case, it would seem you want your images presented at 80% of original size regardless of whether they are presented on the screen or whether you are creating printed output. And if that's the case, I'll ask the obvious question.
Why don't you simply scale them to 80% before inserting them into the project? Wouldn't that solve the issue and eliminate any need to create a CSS rule to scale the image?
Additionally, by scaling in the browser you are likely causing horrible loss of quality. And causing the page to take longer to load because the larger image is being loaded when the page is viewed.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Cropping and resizing Images using Adobe Photoshop Elements 12

I am trying to edit pictures for my web site and previously used adobe photo shop 4 which I liked very well. When I try to crop and resize in photoshop 12 have been unable to adjust the images using pixels. As every photo on my website needs to be in pixels then this is a big problem for me! Is there anyway to change the preferences in the settings? Thanks Tess

You should head over to the Elements forums, this forum is for Photoshop. Go here : http://forums.adobe.com/community/photoshop_elements

Custom resizing images when printing in Elements 11

Similar Messages

Maybe you are looking for