Custom Right-Click Options with Mighty Mouse (scroll-wheel)

Is there a way to add custom actions to the contextual right-click menu on the mighty mouse? Or a program that will allow me to do that? I am looking to add a script or other items to the right-click menu options.

this has nothing to do with the kind of mouse you are using. you can add items to the right-click menu by creating a service. you can make your own using automator.
also, some applications install services when you install the applications and there are a number of built in services available. you can check system preferences->keyboard->keyboard shortcuts->services and activate the ones you want.

Similar Messages

  • Right button woes with mighty mouse

    I have found that the right button on my mighty mouse quite frankly isnt very good. The mouse only detects i have clicked the right button when my left finger is completely lifted off the left mouse button, if it is merely resting on the left hand button, then the mouse detects a left mouse click when in fact it is my right (or middle) finger doing the pressing.!!
    Most annoying...it may sound minor, but retraining my left finger to lift up whilst my right is pushing down is proving very tricky indeed!!!
    Any ideas??? Any kind of firmware update or anything??
    Anyone??

    Hello, Ben,
    This forum is for older, pre-PowerMac G3 Apple hardware, and so probably not the best place for you to get help with your issue. I'd suggest you ask in the MacBook Pro forum and see if someone can offer a suggestion there. It's possible that you just have a defective mouse.
    Good luck.

  • NEWBIE-Using Mighty Mouse scroll wheel to control Color's SMH wheels

    Hi, new here & new to Color, working thru Ripples iTunes Color tutorials right now. Loving Color so far. I hope to be back with less rudimentary questions one day but here's the 1st:
    Lacking a dedicated hardware interface, I'd hoped the Might Mouse scroll wheel would drive the shadow midtone and hilight wheels. I've tried various permutations in system prefs but no dice. Have I missed something? Thank you.

    nadsta, I've found using a ShuttlePRO2 unit very handy. It's cheap, and I can map whatever shortcut I want, and then I use a Wacom tablet for the color wheel adjustments.
    I've mapped the ShuttlePRO to jump between grade 1-4, and the different rooms I use the most (primary in/out, secondaries, color fx), turning grade on/off, set/delete keyframes and adjust keyframe type, two buttons for ALT/OPT and SHIFT modifiers which comes in very handy for selecting and adding to a color selection (in secondaries for instance) or holding ALT while click-and-drag in the color wheels and different parameters around the interface.
    It's not perfect, but I can at least do some things in less time than I would using the keyboard.

  • Strange problem with Mighty Mouse scroll ball

    Hi,
    yesterday suddenly my Mighty Mouse start to have a strange mood. Using scroll ball to go down in a page I haven't problem, but trying to go up don't happened nothing! The problem seems to be software, because the hardware seems to be good.
    What can I do?
    Bye

    http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
    Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
    TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
    "Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
    Some cell phone leather cases actually fit right over the Mighty Mouse.
    Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
    Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.

  • Help with Bootcamp (Speakers and mighty mouse scroll wheel not working)

    So I just loaded bootcamp onto my macbook but I'm having some problems.  First, my scroll bar on my mighty mouse doesn't work when in Windows.  The only help I've seen online has been for those who haven't yet loaded windows.  Can I still download a driver that will help me out?  My speakers also are not working and the Realtek driver that everyone said worked for them didn't work for me.  Advice?

    Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=686228
    With luck it will be fixed in a future version.

  • Right click problem with Magic Mouse

    I wasn't sure where to post this. Whenever I click using the right click, I get a contextual menu instead of whatever the right click was supposed to do. This is a dumb example, but for instance, playing minesweeper, the right click is supposed to create a flag on the space, but in stead I get the menu drop down. Does anybody know how to fix this? I don't think I always had this problem, but now it happens all the time.

    I came here searching for my mom, and this is the same issue she is having. Oddly enough, she is specifically having trouble with a Minesweeper type game lol I was also thinking it is not actually a mouse problem because she can't control/command click either. I think she's only had the problem in Safari, should we be looking in the Safari forum? Oh, she has a brand new (2 months?) iMac with the i3 Intel chip.

  • Mighty Mouse scroll wheel in 10.3.9

    Hi,
    I just got my bluetooth mighty mouse yesterday, It works great even though
    I only have 10.3.9. All the buttons work, the only thing that is not working for me is the scroll wheel moving from right to left. Has anyone had this problem? Is there any software that will help with this? The only thing is, i don't what anything to happen to any of the other buttons, because everything else works great!
    Thanks
    Dave

    I believe the booklet that came with the mouse explains what features work with each version of Mac OS X (I can't remember the page - I don't have the booklet to hand at the moment); I would expect the scroll ball to work with 10.3.9...

  • Vista64 Bluetooth Mighty Mouse scroll wheel SOLVED

    I don't know if this has been answered elsewhere, but I spent a great deal of time trying to figure out why my scroll wheel wasn't working in Vista64. If you're running a "Pro" model, use your system restore disc 1 and look for the boot camp installer for 64. No problems, no "KeyAgent" or "MacHAL" installation problems at all. Hope this helps and isn't redundant.

    Could it be that your mouse has dirt inside affecting the ball to scroll? I had a mighty mouse for just over a year when it stopped scrolling down. They are very difficult to take apart and clean. It would also void its warranty. If it's still within its warranty I would take it back and ask for a replacement. I'm not very impressed with the mighty mouse.

  • Mighty Mouse Scroll wheel disfunction

    Hello
    The scroll wheel on my mighty mouse does not function correct at the moment. When I scroll down, it works, although it skips a bit up and down. But when I try to scroll up, either nothing happens, or it scrolls down. This has happened before, where I've just turned it over onto a piece of paper and pushed around the scroll button a little, until it worked. But this time, that won't do the trick. It also makes a faint clicking noise.
    Any suggestions?
    Rune

    Hi, try a little rubbing alcohol on a piece of soft cloth (handkerchief) give the ball a good 360°
    on the cloth..up/down & roundNround..If the MM is under warranty or you have Applecare Apple will replace it for you..I believe your local store will exchange if you have your computer details & receipt etc....L

  • Mighty Mouse scroll wheel support

    Is it possible to use a Mighty Mouse's scroll wheel to scroll in Shake as in any other OS X program? It's not responding for me (nothing scrolls, and I have to manually drag the scroll bar up and down). Is there a fix for that? (Even better, can I also use the scroll wheel for panning around the node view, timeline, etc. instead of middle-click+dragging? That gets tedious.)

    O~ho! I got it to work, actually. You can install SteerMouse (http://plentycom.jp/en/steermouse/) instead of Apple's driver, and you configure it so that, at least in Shake (it allows per-application configuration), the scroll wheel is set to "x scroll" instead of "acceleration scroll". Huzzah! Shake's interface is now a bit less awful!

  • Mighty Mouse Scroll Wheel

    Hi Gang
    How's everyone doin?
    I suspect the tiny little button wheel in the middle of the mighty mouse is not working properly? I can get it to scroll upward, but not downward. And it does it's job as it goes from side to side. Just can't get it to scroll downward.
    Time for a new mouse with scroll wheel?
    BTW - went to system preferences everything's checked there correctly.
    Thanx guys
    Mike
    Trailer;
    http://vimeo.com/7340608 < Put new photos on the trailer page

    Hi-
    The scroll balls get gummed up with dirt and skin oil.
    There are a few ways to clean it, as this search reveals:
    Clean Mighty Mouse.
    Start with the paper strip tick, then move on to disassembly if necessary.

  • Something wrong with Mighty Mouse scrolling

    I use Leopard, I notice a very irritating thing, if I am scrolling a page in Safari, using the scrolling ball, it goes down but than it doesn't go up Why that ?
    Thanks

    Hello Ferro,
    This may help...
    http://docs.info.apple.com/article.html?artnum=302417
    Hope so.
    Regards
    Ian

  • Cut and Paste with Mighty Mouse?

    I just bought a new mighty mouse and I cannot figure out how to cut and past using the mouse. Do I right click, double click on the highlighted word or left click? Also, how do I drag highlighted phrases?
    Thanks!
    mighty mouse Mac OS X (10.4)

    if you go to
    http://www.mac-switch.com
    scroll down and you will find an article on enabling the right click on the mighty mouse.
    Good luck.

  • How to make the scrollbar function with mouse scroll wheel?

    Is there a way how to make my content scroll even with the mouse scroll wheel?... I have to edit the coding??

    Hey!
    You shouldn't have to edit any code.
    There is an active player bug surrounding this issue however, which causes the following:
    1) It should work on windows.
    2) It may not work on Mac.
    We're continuing to pursue this issue, we know it's important to our users.
    Thanks,
    Tara

  • Mouse scroll wheel do not command Photoshop input fields correctly

    Hi guys,
    Some general info:
    1. I have Logitech Keyboard K800 - it have its own receiver
    2. I have Logitech Mouse (MX1100) - it have its own receiver
    3. Photoshop CS6 x64 - latest updates
    4. Windows 7 x64 - latest updates
    5. SetPoint - latest version
    6. More about the system (please let me know if I have to post all the text from Photoshop System Info popup):
    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3410 MHz
    Built-in memory: 16342 MB
    Free memory: 9098 MB
    Memory available to Photoshop: 14718 MB
    Memory used by Photoshop: 90 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 560/PCIe/SSE2
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 560
    OpenCL Version:
    Driver Version: 9.18.13.1090
    Driver Date: 20121229000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 560
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: 92298292820550253494
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\kckfm\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      F:\, 685.6G, 198.8G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Some other info:
    You  know that you can control Photoshop input fields http://screencast.com/t/ApVseKYRxz with the mouse scroll wheel. Pretty handy indeed. You just have to click on the field and spin the wheel and values changing.
    The problem:
    My mouse wheel cannot control the input fields in this way. I select the field, spin the wheel and nothing happen. When I spin it faster a couple of times, than the values get changing - pretty strange ha? Scrolling normally - do not change, scrolling fast change. But to scroll fast is not an option because I cannot change the values slightly with small increments... There is a bug really...
    What I tried and didn't work:
    1. Restarted Photoshop
    2. Plug/Unplug and change different USB slots for both receivers.
    3. Reintalling latest SetPoint Drivers (after uninstall I run ccleaner)
    4. Put all SetPoint settings to defaults (because I programmed some mouse keys to Photoshop specifically).
    5. Install earlier versions of SetPoint drivers.
    6. Set my UEFI BIOS to defaults.
    7. Restarted the BIOS to load all the drivers again, but still no luck
    (the last think I didn't do is to reinstall Photoshop)
    What I have investigated so far:
    1. When I restart the computer and run Photoshop it works perfect HA! , but after a seconds it do not words again ...
    2. When I stop SetPoint software, when I shut down it, it words perfect.
    3. When I unplug keyboard receiver it words perfect, but I do not have keyboard:)
    4. Everything works perfect in Illustrator and After effects.
    5. Also I noticed that when I scroll images in CameraRaw - http://screencast.com/t/xKnn6cY9 the I have to scroll harder and spin the wheel harder to scroll - the same problem.
    6. Also in photoshop and bridge scrolling here - is pretty smooth and works perfect - http://screencast.com/t/75IXMG6Zria
    Maybe the most important part - When I start experiencing the problem:
    I had same configuration , same everything and everything worked fine.
    I installed SSD disk, reinstalled Windows (same like before), updated my BIOS to UEFI. Installed Photoshop and SetPoint and problem started.
    Posted same request to Logitech, but want to ask you for help too.
    Thanks!

    Hi all,
    I found a solution.
    1. Uninstall your current Setpoint Driver.
    2. Run CCleaner - http://www.piriform.com/ccleaner
    3. Download an older version of SetPoint - http://www.oldapps.com/setpoint.php
    (I used SetPoint 6.15 (x64), I tried 6.20, 6.32, 6.50 , but no luck)
    4. Now everything is all right!
    Thanks!
    Can somebody mark this as solved? Thanks!
    SK

Maybe you are looking for

  • Concatenate multiple pdf files into one single file

    hi, Could any one help me with a code "combining or merging multiple pdf files selected from the browser into one single document" to send it as one single request to the printer? Thanks ,

  • Document Library: Open in Explorer - Client Certificate Selection Prompt

    Hello, when a User in a Document Library clicked on "Open in Explorer" a Window Prompting where the user can choose a Certificate. If the user clicked on Abort (Abbrechen in German) the Library open correct in a Windows-Windows and the user can work.

  • How to see the  GUI of the guest os ?

    Hello all, I have installed the oracle linux 5 as the guest OS using the PVM template. I can access the the guest console using the vm manager / vncviewer, but its just the console. 1]What should i do, if i want the GUI (x server). (In /etc/inittab,

  • Images appear then disappear in mail on 10.4.4 intel duo core mac

    In mail, running 10.4.4 on my new duo core intel mac, i am getting images in mails beautifully - and then for no explicable reason they disappeare and revert to code - and nothing i do will bring them back - i have already checked the box for downloa

  • Cant download iTunesSetup.exe

    Cant download iTunesSetup.exe binary file(131 MB), just shows the "Thank You for downloading " page, but the file isnt downloaded. I removed all iTunes completely due to the MSVCR80.dll missing. I am using Windows Vista Ultimate, 32 bit Operating Sys