Custom ring tones in ios 5

Can't sync custom ring tones in ios 5. Pls help

Are they in the Tones folder of your iTunes library?  If so, and you select to Sync Tones on the Tones tab of your iTunes sync settings you shouldn't receive that warning.  (Mine sync just fine and I have iTunes Match enabled on my 4S running iOS 6.)

Similar Messages

  • HT201269 I downloaded the iOS7, lost all the custom ring tones that I had on my phone, how do i get them back.  when I sync my phone, itunes says that they have been selected, but they don't show up on my phone

    I downloaded the iOS7, lost all the custom ring tones that I had on my phone.  the iTunes sync page says that they have all been selected but they don't show up in my phone? Help?

    I had the same problem and was able to fix it. Go to your iTunes and click on the Tones folder on the left under library. Some of my ring tones had an exclamation mark next to it and those were the ones that did not sync. You have to click on those and find it in your computer. Once the exclamation mark is gone, go to Tones section of your device in iTunes, make sure you select the tones you want synced, and click apply. I hope that helps you!

  • Different alerts for email and sms messages for a contact with custom ring tone

    Hello,
    I have a Curve 8530 with OS 5.0.0.395.
    I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
    Thanks.

    Hello,
    Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

  • Every time I sync my iphone 4 with itunes my ring custom ring tones change.  I have 7 custom ring tones in itunes.  One time it will load 1 custom ring tone the next it may be 3 then the next it is one again.  The last time it gave me 4 of the 7.

    Every time I sync my iPhone 4 with iTunes the number of my custom ring tones change.  I have 7 custom ring tones listed.   The first time it will load 1 of the ring tones and the next time it will load 3,  The next time it will be back to 1.  If I have assigned one of the custom ring tones and it does not get loaded it goes back to the ring tone that came with the phone.  The last time itunes gave me 4 of the 7 so I have not tried to sync it again.  I am using iTunes 10 (10.4.10), and windows 7.
    Has anyone else had this problem??
    Any ideas to what I need to do??

    Have you ever had all 7 of them synced before? Are these ringtones you made yourself? Is there a chance they could exceed 30 seconds in length? Is there a chance you have moved the original file location on the computer? May need the answers to a couple more questions to try and determine an answer.

  • How to set up custom ring tone for a specific contact?

    If someone can guide me how to set up custom ring tone already downloaded from iTunes
    of a specifice  contact? Thanks.

    Tap contacts, select the contact, click edit,  go to ringtone, select ringtone

  • Custom rings tones + itunes = banging my head off the desk

    When i try to sync custom ring tones onto my iphone via iTunes it does so but then deletes ALL my music. How do i stop this

    I would also like to know how to sync tones, without having to sync music at the same time?

  • Help! Custom Ring tones

    Hi there wonder if anybody can help me!
    Trying to set custom ringtones for individuals on my contact list.
    Firstly going to Address book and selecting the contact I want to custom ring tone. Then pressing the menu button and selecting the Add custom ringtone option. But this does not give me an option of selecting a ring tone from my media card. The only option I get is pre loaded ringtones which I do not want to use....

    Check the link below:
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
    there is instruction how to setup your desktop pc and blackberry device to recognize media-sd card installed on your blackberry as an external flash-drive on desktop computer.
    After your device with media card inside recognized as flash drive transfer mp3 files to Blackberry/ringtones folder of that external flash drive.
    And after that these mp3 files will be available to set'em as custom ringtones in Address Book.

  • Is there additional ring tones? or How to make custom ring tones?

    Hi,
    I am thinking about adding additional ring tones.
    Is there any site I can download the ringtones for cisco 7940, 7960, 7940G, 7960G?
    or
    Can I make custom ring tones by myself?
    If there is an application to do the ring tones, pls anyone let me know?
    thanks

    Hi San,
    Just to add a note to the great tips from Ingo and Bethany (+5 points each folks for your nice work here :)
    Here we go :)
    PCM File Requirements for Custom Ring Types
    The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones:
    •Raw PCM (no header)
    •8000 samples per second
    •8 bits per sample
    •uLaw compression
    •Maximum ring size-16080 samples
    •Minimum ring size-240 samples
    •Number of samples in the ring is evenly divisible by 240.
    •Ring starts and ends at the zero crossing.
    •To create PCM files for custom phone rings, you can use any standard audio editing packages that support these file format requirements.
    Configuring a Custom Phone Ring
    To create custom phone rings for the Cisco Unified IP Phone 7965G and 7945G, follow these steps:
    Procedure
    Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section.
    Step 2 Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide.
    Step 3 Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section for information about how to format this file and for a sample Ringlist.xml file.
    Step 4 Save your modifications and close the Ringlist.xml file.
    Step 5 To cache the new Ringlist.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or disable and re-enable the "Enable Caching of Constant and Bin Files at Startup" TFTP service parameter (located in the Advanced Service Parameters).
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/6_1/english/administration/guide/7965cst.html#wp1097651
    There is a nice little Step by Step here;
    http://www.globalknowledge.com/training/whitepaperdetail.asp?pageid=502&wpid=473&country=United+States
    Or search sites like this one;
    http://www.adman.net/cisco/ringtones/browse.asp
    Hope this helps!
    Rob
    PS: Interesting tunes from your link Bethany, I'd love to hear "Scar Tissue" as a ringtone, pretty cool :)

  • Custom ring tones on iPhone 5 and iTunes 11

    Recently purchased the iphone 5 and  have been trying to add my own ring tones from iTunes 11 (generated from either one of 2 apps I downloaded or my using my original song and making a copy then selecting a 30 sec. portion) but it will not sync several because iTunes says it can't find the origial song even though "Locate" the song on my computer.  I have added all of my music to my iTunes library so it should see all of my songs, but does not.

    Are they in the Tones folder of your iTunes library?  If so, and you select to Sync Tones on the Tones tab of your iTunes sync settings you shouldn't receive that warning.  (Mine sync just fine and I have iTunes Match enabled on my 4S running iOS 6.)

  • Upgrade to OS 6.0 wiped out pictures and custom ring tones

    Anyone else have these issues? Sure would have been nice to know that would happen, but of course no mention was made in any of the propoganda RIM released. I'm not happy at all with the look and feel and want my pics and custome ring/text tones back! And, this was supposed to be an upgrade? Howcome they took away all the different options for ringers that were built into the phone? 

    Hi,
    Make sure if any of the field in the structure is_vekp is populated...
    Do one thing. write a small program..declare the same structure as of IS_VEKP.
    Don't populate anything...
    And then add the check statement as in the sap program...
    find out what's happening in the debugging..
    Thanks
    Naren

  • Custom text tones in iOS 5 not working

    Hey,
    I recently updated to iOS 5 as did everyone else. but when I get a tweet it doesn't play the tweet tone, all I get is tri-tone. The text tone works fine enough, but the twitter ones dont . Is that normal?
    Also, I've noticed the battery life on my phone is attrocious. Before it'd last me a day with regular use, but now it loses 25% in 45min...
    No push data is available to be used, bluetooth, wifi and all facebook notifications are off.
    Any suggestions?

    I had the same issue.  Try this:  go into iTunes, select your iPhone, go to Ringtones tab, check the Sync seclected Ringtones, deselect the ringtones that you pruchansed from iTunes Store.  Now Apply/Sync the phone.  When it's done, Go back to the Ringtones tab and select Sync all Ringtones.  Apply/Sync the phone again.  Now go to a contact and set a ringtone, you should see all the purchased ringtones.  Good luck.

  • Re=downloading ring tones after iOS 5 update

    I have 3 ringtones I had purchased from ituns and downloaded to my phone before the newest iPhone update. I had one of them set, and since the iOS 5 update reset everything, i went to re-assign the ringtones and they were gone! I dont know where to find them! ive looked through previous purchases and cant find any ringtones. Where did they go??! Id like to have them back! I though i read somewhere that now we dont have to re=purchase things we have previously bought thru iTunes store anymore because it remmebers what we have purchased in the past,, help?

    sync phoe with ringtones deselected to remove them from phone only, they will stay in itunes, then resync with ringtones selected and your problem will be solved

  • Seting custom email Event ring tones on a Treo 800w

    I want to use custom ring tones for the New Email Event. The ring tones in My Documents/My Ringtones do not show up in the dropdown to select a ring tone. It works fine for the other Events. The file type for the ring files is MP3.
    Post relates to: Treo 800w (Sprint)
    This question was solved.
    View Solution.

    Try copying the file the sound file here:
    My Device > Application Data > Sounds
    Any luck?

  • Custom ALERT TONE for iphone need HELP please.

    I understand how to create a custom TONE as an M4R file and import into itunes into the TONES library.
    When i sync my TONES to my iPhone, it lists as a RING tone.
    My custom ring tones, which are approximately 10 sec long work just fine when set as my RING tone for incoming calls.
    HOWEVER ....
    What i am DESPERATELY trying to do is create a custom ALERT tone and have it LIST as an ALERT tone in my phone and NOT a ring tone. Seems custom tones do not work for sms alerts.
    I searched EVERYWHERE and can not seem to find an answer. I realize apple wants us all to BUY alert tones, but i should be able to create my own too no?
    I created some custom alert tones, approximately 1 sec long each. Converted them to M4R files and sync'd them to my phone.
    In my phone they appear under the RING TONES list and not ALERT TONES.
    Maybe this dosent matter, however, when i try to set my TEXT ALERT SOUND to one of my custom ALERT tones, they do NOT work. My text messages come in without playing the sound.
    Can ANYONE PLEASE HELP ME figure out how to properly create a TONE as an ALERT TONE for my iphone?
    HUGE THANKS to ANYONE that can help.

    I've never been able to assign custom tones under alerts.  It doesn't matter though as you can assign ringtones as alerts as of iOS 5 I believe.  I had a similar issue with silent alerts, sometimes they would play, other times theywouldn't, but they would always play when selecting them under settings.  Resetting all settings (not content) has so far fixed that issue for me.  Try resetting your settings after you've synced your tones.

  • How do i install the ring tones other than i-tune ?

    how do i save the customized ring tones to i phone 5 without I turn using?

    Use aa free app like RMaker or Ringtones and follow the video instructions

Maybe you are looking for