Custom Screen doesn't display properly

I am on SRM 5.5 and I have created a custom screen with a custom field in all the proper structures it's supposed to be in.  The screen has been generated into HTML and it has a service.  I am calling the screen in the BADI BBP_CUF_BADI.  The field is showing properly, but my problem is that my custom screen is not displaying where I expect.  If I generate the HTML template as a type classic, it doubles my fields when it displays and it shows them at the top of the header above all the other standard fields.
If I create my HTML template as WEBGUI, it covers the entire Header section and displays partly at the top over the standard buttons on the screen and partly at the bottom after the last header field.  I presume the custom screen should display after the last header field.  Does anyone know why the screens behave differently when I generate the templates as Classic (shows twice) versus WEBGUI and does anyone know what I might be doing wrong?
Points will be rewarded.
Thanks,
Marty

Hi
There seems like a bug in the SRM system...
Have you created a bespoke service in this case ? Please give some more insights in next reply ?
Meanwhile, go through the links which might help ->
Contract Custom fields are not showing
Re: New Tab in Bid Process Screen
Re: New screen with table control information in Process Bid Invitation
BBP_CUF_BADI_2
Regards
- Atul

Similar Messages

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Index page CS4 doesn't display properly for google chrome users

    index page CS4/ Dreamweaver doesn't display properly for google chrome users, shows as a blue page /  version of Chrome is 17.0.963.56 m. version of flash is 11.1.102.62.  Operating system is Version 6.1 (Build 7601, Service Pack 1).  Javascript version 1.7.  Quicktime is not installed. 

    www.pianofortemusicschool.com

  • Site doesn't display properly when viewed in Windows 8.1 and IE11

    Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

    The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

  • TS3274 dropped ipad now screen doesn't display

    My daughter dropped her ipad and now the screen doesn't display anything.  We can see some light changes but nothing else.  It appears that the screen can still be touched to use apps because we are able to play music.  Any suggestions on what we should do?

    Not sure if you've fixed this, but it really works.  After reading similar advice, I banged it on the corner of my couch and the display totally came back clear as day.  Could not read it before.

  • Externally loaded swf in second window doesn't display properly?

    I have a bitmap based flash game (bitmapdata generated screen) that I'm trying to load in to a secondary nativewindow generated from a main flash (not AJAX/HTML)  based AIR app that's a graphical menu.  I.E. you click on a selection in the menu, and it pops open a secondary nativewindow with the flash game running in it.  The problem is, the game itself gets mangled in the secondary window when it loads in.  Keyboard input goes away, the bitmap doesn't draw properly (it streaks like its not drawing the background image each frame), most of the game objects its supposed to draw in to the bitmap are missing, etc. 
    When I make the game itself in to its own AIR app and run it direct, it works just fine.  So I'm puzzled.  Is there some kind of special coding considerations in the as3 side that I'm missing with the original game?  I.E. if a flash based AIR app launches another nativewindow and loads a swf in to that, does it share some kind of variable set, display list, etc. with the calling window?  Something else?  Any help would be appreciated.

    There are a few differences between (A.) letting the AIR runtime load content into the initial window and (B.) loading content into a new NativeWindow.
    1. In case A, the stage property is available in the class constructor for the main sprite. In case B, this is not the case. You may have to use an ADDED_TO_STAGE event handler to do some class initialization.
    2. In case A, the initial scale is based on the metadata present in the SWF -- this results in the behavior you would expect. In case B, there is no SWF to base the scale on when the window is created, so a default scale is used -- this is rarely results in behavior you would expect (unless the window happens to be created with a size of 72x72 pixels).
    If you aren't setting the stage to noScale, then this could account for some of the visual issues. (See http://www.adobe.com/devnet/air/flex/quickstart/launching_windows.html for an explanation of the scaling issues.) The easiest thing to do is to set the Stage scaleMode to noScale and the align property to the top left setting. I'm guessing your drawing code isn't expecting the scaling so things are getting put in the wrong place.
    3. In case A, the content is automatically put in the application sandbox. In case B, it depends on the URL.
    As for the Keyboard input, this may depend on how you are loading the SWF and from where. This could be related to #3 above, although I would expect to see security errors. How are you adding your keyboard event handlers?

  • Youtube video screen doesn't display with firefox 3.6.15 and adobe flash plug-in 10,2,152,32 installed.

    The video screen (and its controls) doesn't display. All the other parts of the screen display correctly.

    Yep, looks that way to me, too. There's (right this second) '''147''' folks on this thread: ->https://support.mozilla.com/en-US/questions/789534 and
    '''504''' on this thread: ->https://support.mozilla.com/en-US/questions/776670?page=2#answer-143849, not counting our''' 7 '''on this one (my screen's white, too). There's indications that it's a Google/Adobe thing, or a Google/YouTube thing. (That one's after linking Goggle Acct with YouTube.
    And yes, it was still messed up in Safe Mode.
    My take on it is to removing/disallowing cookie setting on YouTube for now, till '''whoever '''finally gets it fixed.
    I hope they'll send a email telling all of us when it's fixed. Heaven knows they have our addresses...
    OOPS--and another '''93'''on this thread: ->https://support.mozilla.com/en-US/questions/789443 And '''117''' on this one:->https://support.mozilla.com/en-US/questions/789576

  • Movie video artwork doesn't display properly on iPad video app

    I have seen the discussion around the problems / solutions regarding the proper displaying of TV shows on the iPad when accessing a shared library, but my problem is with Movie files. The artwork does not display properly. Sometimes the artwork from one movie will be duplicated onto another movie, or they will be all switched around. I have both iTunes purchased movies and converted backups of from my DVD library.
    Has anyone else had this problem?
    I have tried many things. While I see changes in the displayed artwork, they are generally messed up in one way or another on the iPad when accessing the shared library on my computer.

    Curiously enough, if I click on a movie from the shared library on the iPad, the correct artwork shows on the right sight of the window that let's you play the movie or navigate to a chapter. When I go back to the menu screen for all the movies in the shared library, the artwork is still wrong.
    Artwork is messed up even for home-created movies - one of them shows a preview screenshot of the Warner Brothers logo instead of the picture I have in the Artwork setting in iTunes.

  • E61i internet browser doesn't display properly

    Hello,
    I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
    I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
    The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
    Does anybody have a clue?

    It sounds like a cache issue. When you view the page, that
    page is loaded into your (or your client's) browser's cache memory.
    This is done so that when you return to that page it will load
    faster (since it is already loaded into memory).
    This will only happen if a person has been to the page
    recently. There is a limit on the amount of information your
    browser will store in cache memory. The more you surf, the more
    likely it is that the page will be replaced in the cache memory
    with some other information.
    You (and your client) can, depending on what browser you are
    using, set your preferences so that all web pages will be
    completely reloaded every time you visit them. In IE 6 for Win:
    Tools>Internet Options>Settings> Select 'Every visit to
    the page'. You can also set your cache to be the minimum amount of
    space alotted. Note: This doesn't really work very well in IE 6 for
    WIN. I use firefox for reviewing changes because I have found IE 6
    is completely unreliable for viewing the latest.
    Most other browsers will allow you to hold down Shift and hit
    'refresh' to throw out the cache for that page and view the latest.
    As far as I know this is standard operating procedure for proofing
    new pages.
    If there is a coding technique to force a browser to use only
    the latest information, I don't know what it is.
    Good luck.

  • Paypal express checkout doesn't display properly - Firefox 33.0.3

    Paypal express checkout doesn't appear to be displaying properly in firefox (link to screenshot below). I've tried it with Chrome & IE and it works fine, so can only assume this is a firefox bug.
    Screenshot:
    http://voodoo-london.com/ss.png
    I've tried everything in regards to clearing cookies & cache but still no luck.
    Can anyone offer any explanation or resolution for this?

    Separate Issue; Update your
    Flash Player '''v15.0.0.189 http://get.adobe.com/flashplayer/'''
    Please flag your last post as '''Solved Problem''' so other will know.

  • Satellite M30X-111 screen doesn't display anything but external monitor works

    My laptop screen just doesn't display anything (look like when the computer is off) but when I connect the external monitor, then the desktop will be displayed on that monitor. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.
    I again have to plug in the external monitor, and after I tried to reboot, I keep pressing F8 but the start up mode doesn't come up, only the sound of when you keep pressing a button for too long beeps, however, the laptop monitor works again.
    How do I fix this problem?

    Hi
    According to your first posting I presume that LCD display on your notebook is defective. If you can not see BIOS settings or Toshiba welcome screen there must be some display problem.
    Experiment with external display is to be sure that graphic card is not responsible for that. In your case it works with external display and graphic card can not be responsible.
    Like I said try to enter bios settings and report if you can see Toshiba welcome screen.

  • Navigator Window Doesn't display properly

    Hello,
    Suddenly the Navigator Window on the Left of JDeveloper doesn't show properly.Usually the window has 2 subwindows : the top which displays WorkSPace-Projects-classes and bottom which shows the members and methods for each class. Now my top window doesn't show at all. It is like it has been minimized and i cannot restore it. The bottom window occupies all the space.
    When i place the cursor on top of the upper border of the bottom window (just under the green X icon) the cursor changes to a shape that shows that there is another window there but i cannot drag the border down and display again the top navigator window.
    What can i do about that ? ?

    I have seen this problem before but I have not been able to reproduce it.
    The workaround is to:
    - Open the 'Welcome' workspace (Help|Welcome Workspace)
    - Close JDeveloper
    - Launch JDeveloper
    - Open your workspace
    Hope this helps.
    Please let us know if you are still running into problems.
    Regards,
    Arun

  • SimpleChat doesn't display properly for spark on mobile

    I'm using the latest LCCS Spark Beta version. The SimpleChat displays RAW html instead of the styled text, plus it doesn't scroll properly. This problem was posted a few months back but is yet to be resolved. Looking at the LCCS sdk source code, the problem seems obvious: SimpleChat uses the class RichTextArea which the lccs team has created. That class checks to see if "textFlow" exists. If it doesn't as in the case of mobile it just assigns the raw html to the text field which is obviously unacceptable since the user will end up seeing raw html instead of styled text. Below is the problematic code in the lccs RichTextArea class. Is LCCS team supporting mobile devices?
                   if (textFlow)
                        textFlow = TextConverter.importToFlow(str, TextConverter.TEXT_FIELD_HTML_FORMAT);
                    else  {
                        //StyleableTextField(textDisplay).htmlText = str;
                        textDisplay.text = str;

    www.pianofortemusicschool.com

  • CSS - main content h1 and p text doesn't display properly

    Hi all,
    I know this is something really simple, but I just can't seem to get it right.  The h1 and the p text in the main content should have left and right padding to display properly (i.e. space on either side so it's not squished against the Accordion Spry), but it doesn't work.  It shows correctly in DW, but not online.  I'm just learning CSS so sorry for the ignorance!  I've tried everything I know and can't seem to get it right.  I would appreciate ANY help at all.
    http://www.TailgatorsHockey.com/news.html
    Attached is the .css file...
    Thanks so much!

    The padding and margin are certainly showing in the browser for the h1 tag but you have no padding or margin declared in your css styles for the paragraph tag in the 'main-content' <div>
    Add ths to your css styles:
    #main-content p {
    padding: 0 25px 0 25px; /*top/right/bottom/left*/
    margin-left: 10px;

  • Page doesn't display properly in IE 6

    Hi ppl.. My site doesn't display correctly in IE 6. (It works fine with IE 7 and 8 and Firefox) I can see through the area which is supposed to be white ( in other words, I see the background which I put in my body tag). I'm guessing that this happens because the overflow portion of my main content area is set to hidden. Is there anything I can change to rectify this?  Below is my url. Sorry if my post sounds confusing. If you need any details, pls ask me.. Thank you!
    http://www.readislam.net/darulhuda/aqeedah1.shtml

    Differences in rendering abound between IE6 and all other browsers. But this is what I found when I ran your page through w3c validation: http://validator.w3.org/check?uri=http://www.readislam.net/darulhuda/aqeedah1.shtml&charse t=(detect+automatically)&doctype=Inline&group=0
    I often see white turning up as transparent, though mostly in transparent gifs. My ploy in that case is to use a slightly off-white, usually #FFFFFE or some such. I don't know if that will ease your pain, though.
    Beth

Maybe you are looking for