Custom screen in IW22

Hi..
Our Requirement is when a particular user status is set a button should appear in notification screen and on pressing the button a pop-up screen should appear to enter the maintenance details.

Hi Varun,
Due to its complications and not very importantly connected to your theme requirement, I recommend to do away with the push button.
Coming to your requirement, only possibility l too feel is the enhancement QQMA0001 where number of screen-exits are provided.
Now, how this would work for you:
1.This would create a sub-screen with a custom heading having your fields (possibly Z-fields), inside one of your Notification Tabs.
2.This sub-screen will not be seen until your desired User Status is set. As soon as your desired User status is set, it will be appearing and you can input values.
Point 2, above is the logic we write in the PBO and PAI areas of the screen exits.
(These are small things for ABAPers once you explain)
Jogeswara Rao K

Similar Messages

Want to add Custom field in IW22 transaction

Hi All,
I have requirement to add a custom field (Zfield) work class in IW22 transaction in Start/End Dates section.
The custom field has some constant values. When I choose the work class, the Priority field value should automatically populated according to value of work class. Plaese guide me step step procedure.
Regards,
sanjib.

Hi,
Use this Exit QQMA0001:
Create a subscreen in SAPLXQQM Screen No: 0113(Mention the custom screen as per your FD)
I Hope we can achive this by customizations in SPRO.
SPRO>Quality Management>Quality Notification-->Overview of notification
Select the Notification Type-->click on Nofication --> Detail
In this screen enter the screen number which we created at module pool with reference to
custom screen 091 and save the entries.
I hope this may helpfull.
Thanks,
AMS

Comcast new customer screen after firmware update

Every time I try to update my Airport Extreme's firmware, I get the Comcast new customer screen on my browser and can't access any pages other than that. I've had Comcast come out and they it is a problem with my router and not with them since I can surf the internet when my computer is hooked up directly to the modem. I've tried everything including resetting the Airport and cycling the power and nothing works. The only way I can continue to access the internet is when I upload the factory firmware version to the Airport. Has anyone had this problem before or have any suggestions on how to remedy this?

yeah I recall that pain in the butt problem. You probably had them(Comcast) install their so called mac software which you should not have done .
When my memory comes back I'll post the counter measure.
Although try this in the meantime;
ethernet from Comcast modem to wan port of apple router. ethernet from your Mac to lan port of Apple router. Power off the modem and the router. Bring the modem up first then the router. Place the router using DHCP and set your wireless config if need be. Should work.

Customer screen get populated in activity management

hi any one can help me out in this pls.
my client requirement is customer screen get populated in activity management.
my client using activities in crm.They configured customer sceen in activities.In that they have fields like contract validity, type of contract etc.
how it will get populated when they enter customer number.

hi
can u please elaborate ur requirement what exactly we mean be population of activity screen,i din get exactly
best regards
ashish

Custom Screen using BADI seen in ME23N, ME22N Display, but not in ME21N

Hi,
I have developed a custom screen for purchase order using badi ME_PROCESS_PO_CUST and ME_GUI_PO_CUST.
But, its not visible in ME21N, whereas its dipalyed in ME23N, ME22N .
Please advise.
Thanks,
Shivaa....

In TC CMOD you can create a new proyect and use the component MEREQ001 with this component you can see adicional tab in those TC.

Custom screen using BBP_CUF_BADI

Hi,
I am trying to call a custom screen using implementation of BADI, BBP_CUF_BADI.
I have written the following code in the implementation of the PUT_DATA method.
EV_REPID = 'Z_SCREEN'.
EV_DYNNR = '8888'.
The screen is not displayed. Also if you could tell me if the displayed screen will have the look and feel of GUI screen or the look and feel will be similar to the SRM screen in the web?
Thanks,
Mick

Hi Yann,
John is doing a call screen in code. But when you do that you start a different memory process. Also with the code that I have written in the badi
EV_REPID = 'SAPLZCUST_SCREEN'.
EV_DYNNR = '8888'
the PBO of the screen gets executed but the screen is not displayed.
Please help!!!!!
Thanks,
Mick

Print button on custom screen

Hi all,
I made a custom screen and a menu (status ) for that using menu painter. I want to put a button there for printing the screen. What code i have to write for that print button so when user presses print button, it prints the screen????
Thanks
Ribhu

Hi,
Do you know any other exisiting standard screen which function like same as in your customer screen.
if yes, note that screen program name and screen no and then in your module program:
go to PBO
write command as set pf-status 'XXXX'. " ur pf status
double click on 'XXXX'
go to utilities --- adjust templeate
Give that screen program name and screen no
if u dont want redundant codes then. deactviate /delete it...
Then activate all...
then check now ... ur all of fuction buttons are working!!!
Jogdand M B

Scroll bar visible but not able to scroll in custom screen for IW21

Hi,
We are using custom tab (screen exit) in transaction for creating notifications (TCode IW21). Two subscreens are configured to be embedded in the tab, combined area of which is exceeding screen size vertically. The scroll bar is visible in the tab but is not able to scroll using mouse scroll, but can be dragged up and down.
Does anyone know how to make it scrollable or make the scroll bar visible at application level (not in tab) and make it working?
Thank you,
Deepak

Hello,
Would you please implement the Methods GET_DATA to get th data from Databas to screen fields and SET_dATA to update thedata from custom screen fields to Data base table in u r case LFB1.
Regards,

How to call a Custom screen in portal from a Poratal UWL ??

How to display a Custom screen which is developed in portal when a work item is executed through the
portal-UWL ?.
In detail....
A custom screen has been developed in portals.
Workflow triggers when a new item is created on the custom screen then the workitem gets populated in the respective approver Portal UWL(universal work list).
when the workitem is executed from the UWL then it has to display the custom screen with its header data on the portal.

Hi sampath,
Thanks. I found that the redirection is not working
properly at IIS end and changed the configuaration to
make it work.
Thanks a lot,
Gopi

Error while passing data to custom screen. Entry MUM doesn't exist in T001P

Dear All,
I have created a custom screen for PB10. I am getting below error while executing the screen.
Entry MUM doesn't exist in T001P (Check Entry) .
The detail error is
Entry MUM does not exist in T001P (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table T001P. The value or values ' MUM ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
I've checked the table and data is available. But still i am getting this error.
I've come across this error earlier while copying standard screen to custom screen.

The solution to this problem is you have to set your SET and GET parameter in the properties tab of the field.
regards,
sandeep

Data not Updated in Custom Screen fields-Vendor Master

Hello,
I have created a custom screen in vendor master transaction and also implemented the two BADI's below.
Business Add-In: Processing Master Data Enhancements
(CUSTOMER_ADD_DATA/VENDOR_ADD_DATA)
Passed the Custom Program and Screen No in the method GET_TAXI_SCREEN
Business Add-In: Customer Subscreens
(CUSTOMER_ADD_DATA_CS/VENDOR_ADD_DATA_CS)
activate it with the BADI Processing Master Data Enhancements with method CHECK_ADD_ON_ACTIVE.
I also created a new screen and used few fields from LFA1 (Append structure fields) such that the fields on the screen are : LFA1-ZZFIELD1 etc...
Now the issue is the screen is displayed, but the data entered on the screen is not updated on the table LFA1 or data from the table is not displayed on the custom screen.
Am i missing something?
Regards,
Shiva

Solved this problem.
I built the query against InfoCube and not the characteristic itself. That's why I can't see the update.
Thanks.

Could not get Custom screen in me21n after implementing Badi ME_GUI_PO_CUST

Hi.,
I created implementation for the badi ME_GUI_PO_CUST... but i could not get the Tab and screen in header tab.
also used below link in the forum to correct the issue ....but dint help me .
Custom screen not displaying using BADI ME_GUI_PO_CUST
Pls help me how to go abt...
Thanks,
Ranjitha.

Hi ....
Now the tab is reflecting in me22n & me23n but not in me21n ......can anybody tell what could be the reason?
thanks
ranjitha

Added custom screen in PO using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST

Hi All,
I have added custom screen with two z fields at item level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST i can see my screen in tcodes ME21N , ME22N , ME23N but I am not able to save data.
and also screen is coming in change mode even in ME23N .
thanks.

Hi,
I have added two xfields at item level.
This is the code i have added in zimplementation ZME_GUI_PO_CUST .
IN Zimplementation ME_PROCESS_PO_CUST I have added code only in method FIELDSELECTION_ITEM . after doing this I can see only screens in ME21N, ME22N, ME23N but when enter data in zfields and trying to save it is giving me message no data has changed.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element     = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '0001'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLYMEPOBADIEX'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
a label can be defined
ls_subscriber-label = text-001.
the position within the tabstrib can be defined
ls_subscriber-position = 4.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_MODEL.
DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
        ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl.
system asks to transport data from the business logic into the view
CASE im_name.
    WHEN subscreen1.
is it an item? im_model can be header or item.
      mmpur_dynamic_cast l_item im_model.
      CHECK NOT l_item IS INITIAL.
transport standard fields
      ls_mepoitem = l_item->get_data( ).
transport customer fields
      CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
        EXPORTING
          im_ebeln = ls_mepoitem-ebeln
          im_ebelp = ls_mepoitem-ebelp
        IMPORTING
          ex_data = ls_customer.
store info for later use
      MOVE-CORRESPONDING ls_mepoitem TO dynp_data_pbo.
      MOVE ls_customer-badi_bsgru TO dynp_data_pbo-badi_bsgru.
      MOVE ls_customer-badi_afnam TO dynp_data_pbo-badi_afnam.
    WHEN OTHERS.
ENDCASE.
endif.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_DYNP.
CASE im_name.
    WHEN subscreen1.
      CALL FUNCTION 'YMEPOBADIEX_PUSH'
        EXPORTING
          im_dynp_data = dynp_data_pbo.
    WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_DYNP.
CASE im_name.
    WHEN subscreen1.
      CALL FUNCTION 'YMEPOBADIEX_POP'
        IMPORTING
          ex_dynp_data = dynp_data_pai.
      IF dynp_data_pai NE dynp_data_pbo.
something has changed therefor we have to notify the framework
to transport data to the model
        re_changed = mmpur_yes.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_MODEL.
DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
        ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl.
data have to be transported to business logic
CASE im_name.
    WHEN subscreen1.
is it an item? im_model can be header or item.
      mmpur_dynamic_cast l_item im_model.
      CHECK NOT l_item IS INITIAL.
      ls_mepoitem = l_item->get_data( ).
standard fields changed?
     IF dynp_data_pbo-matkl NE dynp_data_pai-matkl OR
        dynp_data_pbo-plifz NE dynp_data_pai-plifz OR
        dynp_data_pbo-webaz NE dynp_data_pai-webaz.
update standard fields
       ls_mepoitem-matkl = dynp_data_pai-matkl.
       ls_mepoitem-plifz = dynp_data_pai-plifz.
       ls_mepoitem-webaz = dynp_data_pai-webaz.
        CALL METHOD l_item->set_data( ls_mepoitem ).
     ENDIF.
        CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
          EXPORTING
            im_ebeln = ls_mepoitem-ebeln
            im_ebelp = ls_mepoitem-ebelp
          IMPORTING
            ex_data = ls_customer.
        ls_customer-badi_bsgru = dynp_data_pai-badi_bsgru.
        ls_customer-badi_afnam = dynp_data_pai-badi_afnam.
        CALL FUNCTION 'YMEPOBADIEX_SET_DATA'
          EXPORTING
            im_data = ls_customer.
     ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDIF.
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM.
DATA: l_persistent TYPE mmpur_bool.
CONSTANTS:
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
l_persistent = im_item->is_persistent( ).
*IF l_persistent EQ mmpur_yes.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                     metafield = MMMFD_YYMAN_NUM."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                     metafield = MMMFD_YYMAN_DES."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
*ENDIF.
ENDIF.
endmethod.

Customer screen using BADI : ME_GUI_PO_CUST

Hi
I am implementing BADI : ME_GUI_PO_CUST to create custom screen at item level.
Pls tell me the steps to be followed to get custom screen using BADI
Thanks
Vinay.

Hi Vinay,
go to transaction SE18, then enter your BADI.The in menu go to Goto -> Sample Code -> Display. You will see example of implementation of this BADI. All these examples are very well commented. Basically you will have to create your own function group with your new screen and call this screen from methods of BADI.
Cheers

Custom screen for Payment card information in Sales Order

Hi All,
I want to know if its possible to develop a custom screen to accept multiple payment card information in Additional data tab and save it in normal payment card information at the time of saving sales order. This sounds little
Nilesh

Hi Nilesh,
Please, see SAP Note 914603 - FAQ/Collective note for payment cards (Consulting/modif). Here you have the relevant notes related with this topic, so, in point 4, the note says:
4. Payment cards in the order (with billing plan)
- 914811 FAQ: Authorisation Problems - Why?
- 915193 No authorization in the order
- 313416 Installment plan payment with payment cards
- 361790 No Authorization or only pre-authorization executed
- 701569 Incorrect value to be authorized in the order
I hope this helps you
Regards
Eduardo

Custom screen in IW22

Similar Messages

Maybe you are looking for