Custom search help tab for "Material" in ME21N...

Experts,
I have a requirement to create a separate tab in the standard collective search help that is triggered in F4 at the Material field in PO items for ME21N to add an additional search criterion for Materials by Material Group, there by reducing the number of material groups displayed.
Ex: ME21N -> F4 on Material -> Just like the tab "Material by Mat Group" on the collective search help, there has to be an extra tab for "Materials by non-taxable Material Groups".
Please advice on how I go about it. Using Exits/BADIs?
Thanks in advance
NW

Hi,
GO TO SE11. Under Search help radio button enter the standard search help name MAT1.
From menu clicke on "Append Search Help (F5)" and enter a name ZAMAT1 (Match Code by Material and Material Group)
Enter field names as follows:
Srch Help parameter                   Data element     Def.value
MATNR               MATNR                         
WERKS               WERKS_D     WRK
MATNR_B               MATNR                         
PLNTY               PLNTY                         
PLNNR               PLNNR                         
PLNAL               PLNAL                         
MATNR_HTN          EMATN                         
VKORG               VKORG                    VKO
VTWEG               VTWEG          VTW
Regards,
Subramanian

Similar Messages

  • Issue Search Help Exit for Material Group

    Dear Expertsl,
    I developed a search help exit for material group for the search helps both H_T023 and H_2023_MEPO to restrict certain material groups from the actual display as follows
    1)  I developed custom table to hold the Invalid material groups
    2) Developed search help as same as in the bellow link
    link:[https://wiki.sdn.sap.com/wiki/display/Snippets/CaseInsensitiveSearchHelpExitforMaterial+Group]
    3) Before the statement
        SELECT matkl wgbez wgbez60 FROM t023t INTO s_t023t
          WHERE matkl IN t_matkl
    i selected the Invalid materials from the custom table into an internal table
    4)    i am restricting the entries with the following code.
    LOOP AT a_tab.
    only move values that meet the requirements
    after you convert to upper case.
         MOVE a_tab-wgbez60 TO a_tab-wgbez60_test.
         TRANSLATE a_tab-wgbez60_test TO UPPER CASE.
            MOVE      a_tab-wgbez        TO a_tab-wgbez_test.
            TRANSLATE a_tab-WGBEZ_test   TO UPPER CASE.
            MOVE      a_tab-wgbez60      TO a_tab-wgbez60_test.
            TRANSLATE a_tab-wgbez60_test TO UPPER CASE.
          IF a_tab-wgbez60_test IN i_wgbez60 AND
             a_tab-wgbez_test   IN i_wgbez   AND   
             a_tab-matkl        IN i_matkl.
            ADD 1 TO findex.
            MOVE a_tab-matkl   TO temp_tab-matkl.
            MOVE a_tab-WGBEZ   TO temp_tab-WGBEZ.   
            MOVE a_tab-wgbez60 TO temp_tab-wgbez60.
            IF findex > callcontrol-maxrecords.
              MOVE 'X' TO callcontrol-maxexceed.
              EXIT.
            ENDIF.
            READ TABLE i_invalid INTO w_invalid
            WITH KEY matkl = a_tab-matkl.
            IF sy-subrc NE 0.
              APPEND temp_tab.
            ENDIF.
            CLEAR temp_tab.
          ENDIF.
        ENDLOOP.
    This is working fine when we press F4 in ME21N Transaction and give some description and then press enter the popup screen.
    But my requirement is user will enter some description in ME21N material group field and press enter ( Not pressing the F4 here) at this moment this is not going through the search help exit and displaying all the entries including the Invalid materials.
    Note: We can delete the Invalid material groups but the documents which are having the invalid material already will have an issue and need to be corrected all the documents. But our requirement is only to use the correct materials  groups from now onwards.
    I would appropriate if any one can helping this regard.
    Thanks in advance.,
    Regards,
    Venkat

    Hi Venkat,
    You can call your ZSEARCH_HELP from the PAI , on the event SY-UCOMM = Enter using the function module F4IF_FIELD_VALUE_REQUEST.
    For example, your screen field is MARA-ZXXXX, screen 0100 and search help :  ZSEARCH_HELP
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname                   = 'MARA'
          fieldname                  = 'ZXXXX'
          searchhelp               = 'ZSEARCH_HELP '
          dynpnr                      = '0100'
          dynprofield                =  'MARA-ZXXXX'
    TABLES
       return_tab                = lt_returntab.
    This F4IF_FIELD_VALUE_REQUEST will call your custom search help exit.
    Regards
    Deepa.

  • Search Help Exfit for Material

    Hi,
    Scenario:
    in the F4 dropdown for material, I have added a new elementary search help which will search a laterial based on material description(makt-maktx)/basic material(mara-wrkst)/size & dimension(mara-groes).
    Requirement:
    I need to add one more field in my search help "Global Search". In this field whatever has been entered has to be searched in all the tree fields mentioned above. For eg.
    If i enter "valve" in my global search field, then 'valve' should be searched in makt-maktx & mara-wrkst & mara-groes and should give me the total result.
    Solution Lead:
    I created a search help exit and inside that I found out that I have to write my code under:
    IF CALLCONTROL-STEP = 'SELECT'.
    Now Im not able to figure out how to write the code inside IF CALLCONTROL-STEP = 'SELECT'.
    Please help.
    Regards,
    Shobhit

    Hi!
    Say you've define input parameter PARAM for your search help. Then you should proceed as follows:
    IF callcontrol-step = 'SELECT'.
        DATA:
          param_val TYPE ddshiface-value.
        CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
          EXPORTING
            parameter               = 'PARAM'
          OFF_RESULT              = 0
          LEN_RESULT              = 0
          FIELDNAME               = ' '
         IMPORTING
           value                   = param_val
          TABLES
            shlp_tab                = shlp_tab
            record_tab              = record_tab
          SELOPT_TAB              =
          RESULTS_TAB             =
          CHANGING
            shlp                    = shlp
            callcontrol             = callcontrol
         EXCEPTIONS
           parameter_unknown       = 1
           OTHERS                  = 2
        IF sy-subrc <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        DATA:
          it_hitlist TYPE STANDARD TABLE OF z_your_hitlist_structure.
        IF param_val IS INITIAL.
    *TODO: fill it_hitlist correspondingly
        ELSE.
    *TODO: fill it_hitlist correspondingly too
        ENDIF.
        IF sy-subrc = 0.
          callcontrol-step = 'DISP'.
        ELSE.
          callcontrol-step = 'EXIT'.
        ENDIF.
        CALL FUNCTION 'F4UT_RESULTS_MAP'
        EXPORTING
          SOURCE_STRUCTURE         =
          APPLY_RESTRICTIONS       = ' '
          TABLES
            shlp_tab                 = shlp_tab
            record_tab               = record_tab
            source_tab               = it_hitlist
          CHANGING
            shlp                     = shlp
            callcontrol              = callcontrol
         EXCEPTIONS
           illegal_structure        = 1
           OTHERS                   = 2
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    ENDIF.
    Regards,
    Maxim.

  • How to pass custom search help(F4 help) for a field in ALV output?

    Hi,
    I want to activate the F4 help in ALV output for a field for which we do not have search help assigned at table ,data element and domain level.
    In field catalog i have enabled it by below line.
    ls_fcat-F4AVAILABL = 'X'.
    but because there are no standard input help available it is giving message as "No input help is available".
    so how to pass our custom search help (g_search) for any field in ALV output.
    I am using object oriented ALV grid display.
    Thanks!!!
    Rajesh Gupta.

    hi,
    check this out:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/acdefb13-0701-0010-f1a2-8eeefa7d3780
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d?quicklink=index&overridelayout=true

  • Custom Search Help for Functional Area of Cost Centre(KS01/KS02)

    Hi,
    I need to implement a custom search help and custom enhancement for the field Functional Area in Basic Data tab of Cost Centre Create/Change(KS01/KS02) transactions. Details of the requirement are as below:
    1. There will be a custom relation for the Cost Centre category and Functional Area which was maintained thru a SAP standard table TKA05 and a custom table.
    2.When the relation to Cost Centre category and Functional Area is a one to one it exist in the TKA05 and if its one to many it will be maintained in the custom table.
    3. The requirement is when the Cost Center to Functional area is maintained in table TKA05(One to One) in this case the corresponding Functional Area needs to be populated automatically after entering the cost centre and pressing a enter key by user.
    4.When the Cost Centre Category and Functional area does not exist in table TKA05 and existing in custom table(One to Many) in this case the F4 should be enabled for user selection with the list of Functional area values corresponding to the cost centre category entered that are maintained in the custom table.
    As per the functionality provided by SAP the input help(F4) of the field Functional area in Cost Center does not have any relation with Cost Centre Category. The existing F4 is from the Value Table(TFKB) attached to the domain of FKBER.
    Please provide your valuable inputs to implement the above requirement. Your input will be rewareded.
    Thanks in advance,
    Regards,
    Prasad.

    kalyani,
    i can see your requirement in below way..
    as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
    so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH                        
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH     INTERFACECONTROLLER
    so you can replicate the same functionality for your z field.
    but can you clarify one thing.. why are you going for this z field in place of standard field ?

  • Search help Enhancement for the Material Number (MAT1 - Search help name)

    Hi ,
    In my Requirement if the user clicks on the Material Number Search help(eg in ME51N - T.code: Material )
    It will shown a additional Search help along with the existing one.
    That search help would have input parameter fields as Material Number , Material Group , Material description , Plant and storage location.
    The output screen has to display the Available Quantity for the input  material, plant and  storage location.
    The available quantity has to calculated from various Tables like mard , mssq etc.
    My question is how to display the available quantity in the search help screen, i tried with search help exit but not successful.
    I am displaying the remaining fields(except available quantity)  using database view from different tables like Mara , Mard ,Makt.
    where to write the Logic for the Available Quantity to display it in search help.
    Thanks and Regards,
    Prakash K

    Hello,
    if this search help is collective then you could delete standard single (SAP allows maintain collective search help with out object key registration) one and insert custom search help which has the same structure plus additional field.
    best regards,

  • Custom search help in WD for ABAP

    Hi
    I have a Text field which does not have any input help. Now I have a custom Search help object in my R/3 store. How do i use this search help object for displaying the values for this Text field. I believe there is some standard  method  available for this. Kindly help me out.
    Regards,
    <i><b>Seema</b></i>

    Context->Dictionary Search Help.

  • Custom Search Help for the field Equipment number

    Hi,
    I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
    Here after pressing F4(Search help) standard search help is display.
    I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
    Ex. Field equipment  category (EQTYP).EQUNR(Equipment Number).
    Please let me know how to work for the customised search help.

    Hi,
    You need to create a customized search help.
    [Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
    [Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
    Then you need to attach the search help to the screen field..
    [Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
    [Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
    regards
    Nitesh

  • Custom search help for characteristic based variant

    Dear Experts,
    I have characteristic based variant report, my requirement is, in any  Article(matnr) related transaction( Ex: MM43, VA01..) I required custom search help based on these characteristics and i will populate article/variant. Attached report selection screen snap. This screen will come in my custom search help.
    Regards,
    Abbas.

    I have found own for my problem. I am using MAT1 standard search help and with database view.
    Regards,
    Abbas.

  • Custom Search Help for Business Agreement field in transaction BP.

    Dear Experts,
    My requirement is to add Custom search help to Businees Agreement field (BUPA_CRMM31-BUAG_ID) in transaction code BP.
    PLease guide me how to add Custom search help to Businees Agreement field which dont have search help option.
    Regards,
    Bala

    Hello there,
    I think the requirement/question is not very clear in your post.
    However, the segment Java applet calls a CRM class which has related code and methods.
    Class:  CL_CRM_MKTTG_SEGAP_COM
    Package: CRM_MKTTG_SEG_APPLET.
    Please explain the problem in detail.
    Regards,
    Vinamra.

  • Custom search help in sap field in standard transactions.

    I have a requirement that I have to add a custom search help in XREF2 of bseg table either in fb02-f-43.
    For FB02.
    Display document.
    Select a Line Item.
    Go to Additional Data tab in menubar,a pop-up will come, where we will get the Reference1 fields .
    My requiremnt is to add a custom input help having 3 constant values.
    For F-43.
    Give account , date etc in first screen.
    Go to next screen give the amount.
    Go to more data will get the fields in left side-no pop-up will come.
    Help needed

    hi, Jkuma,
    we met the similar situation with you while developing a anpplication form for HR.
    our conclustions are:
    1. it's not feasible to put all the data into the form, it will make the form too big and slow, so it must be a online interactive form
    2. you may put a search field to let the user to input some kind of criteria and do the search on the r3 side and return the hit list on the form , but it's not so easy to develop a table control on the form using javascript to get the selected one.
    3. so we built a 'selection screen' , using webdynpro for abap,
    it will show up before the form, while can use ddic search help, to make the selection, then put all the selected entries into the adobe form for further processiong.
    how this is helpful hint for you.
    br.
    jun

  • Appending custom search help

    Hi,
    I have appended a custom search help to std collective search help C_SAKNR, which is assigned to data element SAKNR. The reason to append custom search help is when the user presses F4 on G/L account field on ME51N transaction, there should be another choice of selecting G/L account based on another custom field which we have added on custom data tab. The entries are maintained in custom table which is the selection method.
    To test search help , I executed the Collective search help C_SAKNR, three parameters are used, BUKRS, KTOPL, SAKNR , when I press F4 on SAKNR I can see my search coming up at the end and can select the G/L account value which we have maintained. Now when  try on ME51N screen, the additional custom search doesn't show up, the on screen field has same data element SAKNR.
    I created one structure with field SAKNR and data element SAKNR and used on custom screen, when I execute and press F4 on screen, my custom search comes up with all the std ones. Its not working on ME51n or ME21N screens, not able to figure out whats wrong.
    Please let me know your suggestions on this.
    Thanks

    Solved it myself. I appended my search help in another included collective search help .
    Thanks

  • Custom  search help on standard field of PO Item

    Hi all,
    any one know a way to build a custom search help on field EKPO-AFNAM in transaction ME21n,ME22N?
    I'd prefer don't change the standard data element adding the search help. Is there a standard way, like badi or user exit?
    I'm using ECC 6.0
    Regards,
    enzo

    Check all Ewxits
    Transaction Code - ME21N                    Create Purchase Order
    Exit Name           Description
    LMEDR001            Enhancements to print program
    LMELA002            Adopt batch no. from shipping notification when posting a GR
    LMELA010            Inbound shipping notification: Transfer item data from IDOC
    LMEQR001            User exit for source determination
    LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001            Customer-Specific Source Determination in Retail
    M06B0001            Role determination for purchase requisition release
    M06B0002            Changes to comm. structure for purchase requisition release
    M06B0003            Number range and document number
    M06B0004            Number range and document number
    M06B0005            Changes to comm. structure for overall release of requisn.
    M06E0004            Changes to communication structure for release purch. doc.
    M06E0005            Role determination for release of purchasing documents
    ME590001            Grouping of requsitions for PO split in ME59
    MEETA001            Define schedule line type (backlog, immed. req., preview)
    MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
    MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1            Enhancement to Document Overview ME21N/ME51N
    MEVME001            WE default quantity calc. and over/ underdelivery tolerance
    MM06E001            User exits for EDI inbound and outbound purchasing documents
    MM06E003            Number range and document number
    MM06E004            Control import data screens in purchase order
    MM06E005            Customer fields in purchasing document
    MM06E007            Change document for requisitions upon conversion into PO
    MM06E008            Monitoring of contr. target value in case of release orders
    MM06E009            Relevant texts for "Texts exist" indicator
    MM06E010            Field selection for vendor address
    MMAL0001            ALE source list distribution: Outbound processing
    MMAL0002            ALE source list distribution: Inbound processing
    MMAL0003            ALE purcasing info record distribution: Outbound processing
    MMAL0004            ALE purchasing info record distribution: Inbound processing
    MMDA0001            Default delivery addresses
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    AMPL0001            User subscreen for additional data on AMPL
    No of Exits:         35
    Transaction Code - ME22N                    Change Purchase Order
    Exit Name           Description
    LMEDR001            Enhancements to print program
    LMELA002            Adopt batch no. from shipping notification when posting a GR
    LMELA010            Inbound shipping notification: Transfer item data from IDOC
    LMEQR001            User exit for source determination
    LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001            Customer-Specific Source Determination in Retail
    M06B0001            Role determination for purchase requisition release
    M06B0002            Changes to comm. structure for purchase requisition release
    M06B0003            Number range and document number
    M06B0004            Number range and document number
    M06B0005            Changes to comm. structure for overall release of requisn.
    M06E0004            Changes to communication structure for release purch. doc.
    M06E0005            Role determination for release of purchasing documents
    ME590001            Grouping of requsitions for PO split in ME59
    MEETA001            Define schedule line type (backlog, immed. req., preview)
    MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
    MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1            Enhancement to Document Overview ME21N/ME51N
    MEVME001            WE default quantity calc. and over/ underdelivery tolerance
    MM06E001            User exits for EDI inbound and outbound purchasing documents
    MM06E003            Number range and document number
    MM06E004            Control import data screens in purchase order
    MM06E005            Customer fields in purchasing document
    MM06E007            Change document for requisitions upon conversion into PO
    MM06E008            Monitoring of contr. target value in case of release orders
    MM06E009            Relevant texts for "Texts exist" indicator
    MM06E010            Field selection for vendor address
    MMAL0001            ALE source list distribution: Outbound processing
    MMAL0002            ALE source list distribution: Inbound processing
    MMAL0003            ALE purcasing info record distribution: Outbound processing
    MMAL0004            ALE purchasing info record distribution: Inbound processing
    MMDA0001            Default delivery addresses
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    AMPL0001            User subscreen for additional data on AMPL
    No of Exits:         35
    Rewards if useful....................
    Minal

  • Custom search help over standard search help

    Hello all,
    i made a selection screen with some standard fields and it is shoeing F4 as well, but now problem is that now i want to display customized search help, means wants to add our data in F4, can anyone please help me?
    i m doing below code but it is showing nothing, neither standard one nor customized one.
    code:
    SELECT-OPTIONS: so_mesty FOR edidc-mestyp.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_mesty-low.
      PERFORM f4_help.
    FORM F4_HELP .
    TYPES : BEGIN OF gst_stat,
            ZZVALUE like ZCS_PARAM-ZZVALUE,
            ZZPARADES like zcs_param-ZZPARADES,
      END OF gst_stat.
      data : lt_stat TYPE TABLE OF gst_stat.
    CONSTANTS: gc_obj(7) type c value 'MMR0320',
                gc_par(6) type c value 'MTYP*'.
       refresh lt_stat.
      select zzvalue ZZPARADES from ZCS_PARAm into table lt_stat where ZZOBJECT = gc_obj and ZZPARANAME = gc_par.
      if lt_stat[] is not initial.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            RETFIELD        = 'ZZVALUE'
            DYNPPROG        = sy-repid
            DYNPNR          = sy-dynnr
            DYNPROFIELD     = 'SO_MESTY-LOW'
            VALUE_ORG       = 'S'
          TABLES
            VALUE_TAB       = lt_stat
          EXCEPTIONS
            PARAMETER_ERROR = 1
            NO_VALUES_FOUND = 2
            OTHERS          = 3.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      endif.
    ENDFORM.                    " F4_HELP
    Regards.

    Hi,
    You can try doing like:
    On At Selection Screen on value-request for Fieldname.
    First select the data from your multiple table and populate
    one final table then that final internal table needs to be passed
    in FM:
    For Eg:
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CLASCN-LOW.
    *F4 help for material classification data
      PERFORM F4_HELP_CLASIFC USING S_CLASCN-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CLASCN-HIGH.
    *F4 help for material classification data
      PERFORM F4_HELP_CLASIFC USING S_CLASCN-HIGH.
    *&      Form  F4_HELP_CLASIFC
    *       text
    *      -->P_S_CLASCN_LOW  text
    FORM F4_HELP_CLASIFC  USING    P_S_CLASCN_LOW.
    *To fetch the classification data on the sel screen
      SELECT CLINT CLASS FROM KLAH UP TO 500 ROWS
      INTO TABLE IT_KLAH.
      IF SY-SUBRC <> 0 .
        MESSAGE TEXT-006 TYPE 'E'.
      ELSE.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
    * DDIC_STRUCTURE = ' '
        RETFIELD = 'CLASS'    "Field name on which custom F4 is required
    * PVALKEY = ' '
        DYNPPROG = SY-REPID
        DYNPNR = SY-DYNNR
        DYNPROFIELD = 'p_s_clascn_low'
        VALUE_ORG = 'S'
        DISPLAY = ' '
        TABLES
        VALUE_TAB = IT_KLAH.   "Final Internal table
      ENDIF.
    ENDFORM.                    " F4_HELP_CLASIFC
    Hope it helps
    Regards
    Mansi

  • Custom Search help in Record Working Time

    Hi,
    We have a requirement to add a custom field on RECORD Working Time ( ESS). This field has been added and custom search help is assigned to the data element of the field. The values in the F4 help should vary based on employees department.
    The related code for this requirement is written in the serach help exit. The F4 help is working as expected from backend ( ECC) but not in Portal (ESS).
    I have added the custom field in TCATS_SHLP_ITS. After maintaining this table all the values in F4 help are displaying , whereas it should only display the values under employees department in Record Working time.
    I understand the class cl_xss_cat_value_help_general is responsible for the search help in ESS is there any user exit or enhancement available for this class in order to control the serach values on ESS.
    Thanks in advance.
    regards,
    Pradeep

    note that search help of CAT2 and record working time are different!
    these are teh steps
    please modify the following in the table TCATS_SHLP_ITS as follows:
              1. Execute the T-Code SM31
              2. Enter the table name TCATS_SHLP_ITS.
    or check the class
    CL_XSS_CAT_VALUE_HELP_GENERAL
    or check
    CL_XSS_CAT_VALUE_HELP*
    take an example from Sap note 914125

Maybe you are looking for