Custom Set Types for Products

Hello,
We have added some Z set types for our CRM Products and have created two Z tables for this. But even though we update these tables, we are not able to get the values for product on the screen.
Can someone tell me what all tables should be updated when we have cutsom Set Types in use?
Rgds
Priyanka

Hi Priyanka,
I Guess you want the Values in the Ztable as F4 help values for the Z attributes in Z set types of the product.
To do the same plz follow the steps mentioned below:
1) Identify the field(Attribute in Set type) for which you want the F4 help.
2) Go to SE11. Select Data Type and enter the name of the Attribute value.
3) Press Change
4) Doble click on the Domain to go to the domain element associated to it.
5) In domain element screen, go to Value Range Tab.
6) In Value Range Tab, you have a Value Table field, Enter the ZTable from which you want the value to be populated in F4.
7) Save and Activate the Domain element.
Test the scenario.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Similar Messages

Set type for product pricing

Hi,
Its urgent requierment i need set type if any for updating product price for z type condtion table.
I CRM_PRODUCT_CONDITIONS check this package but i dont get any input. the bapi which i am using have no code inside for conditions COM_PROD_MATERIAL_MAINTAIN_API.
i tried these bapis :
COM_PRODUCT_MAINT_CONDITIONS : not Working
PRC_MAST_CREATE_CONDITION :I am uploading conditions separately by using this FM PRC_MAST_CREATE_CONDITION
But this FM is throwing dump when I execute it with correct product Id.Attached screen shot .I am passing CRM for application and
PRODUCTCRM to maintenance group.It is throwing dump at product_id.

any input

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Load customized set type using LSMW+ IDOC (XIF)

Hi experts,
now i could load most product field using LSMW+ IDOC (XIF), but when i load customized set type, it gives error " User-defined set type ZTest does not exist in BDOC structure ". After some study i know i must to enhance BDOC type ? but i am not very familiar with BDOC, andy idea ? ths
also could anyone provide some function module to load product ? ths again
Edited by: Gang LI on Apr 23, 2009 11:57 AM

Hi,
You will have to Re-Generate Your BDoc Structuring due to your Carried out Changes,
Use TCode:SMW_BDM
For Creation of the BDoc and Check.
Hope it answers your Queries..
Thanks and Regards,
RK.

Movement type for production supply missing in warehouse

Gurus,
I am getting this error when i use TC-LP11
movement type for production supply missing in warehouse
What should be done?

All I can suggest is checking the master data:
Must have at least one Prod. Supply Area and one control cycle set up.
PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
Created under application menu:
Logistics/LE/Master data/Warehouse/Production Supply (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
(To find out the PSA aka Supply Area from Process Order Display Tx select: Goto \ List \ WM Picklist and scroll to right)
A Control Cycle defines for a given material, Plant and PSA:
which WHS to get the material from
which interim storage type to take it to
which bin to place it in (can be dynamic for pick parts)
Logistics/LE/WM
Master data/Control cycle record/Create
Regards,
Nick

Implementing a custom process type for a process chain

I have created a custom process type for a process chain that allows a user to send back a failure or error status when calling an ABAP program. I copied the class that is used from the existing ABAP process type as a template.
The process type works fine, I just cannot find out how to recreate the documentation for my custom type using free text. When you maintain the process type there is a field for the documentation object, but I can't find where in SAP to implement this.
I have tried looking at the document maintenance using SE61 and looking into the class documentation from SE24 with no success. The only detail that is provided in the SAP help portal is:
"If necessary, assign a documentation type and a docu. object to the process type. The docu object can be called up via F1 in the process chain maintenance overview tree. "
Does anyone out there have any experience with this that can push me in the right direction?
Thanks,
Eddie

You can create and maintain system documentation from transaction SE61. This is how you would create documentation for a process type or if you wanted to create a book. <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a4/d47df949e111d189730000e8322d00/frameset.htm">more info</a>
Here are the steps to make your documentation similar to that used for the ABAP process type:
From transaction SE61:
-Create a document of type TX (either from scratch or by copying RSPC_ABAP which is used for the SAP-delivered ABAP process type)
-Make any changes you need. I suggest downloading the document in ITF format and make the changes in a basic text editor and then uploading your changed document. It's a little easier to tell what is going on that way.
Now on to transaction RSPC.
Once you save your changes, go to RSPC and select on any chain you have to get into the "plan and check views of process chain maintenance." Then just go to Settings -> Maintain Process Types.
From here you can select your process type, select TX from the document type dropdown, and then enter the name of your document in the docu. object field.
Hope that helps.

Custom class type for Plant material

Is there any way to create a custom class type for plant and material? Any other way to use standard functionality to use classification in material master for specific plan will also work.
thanks,

Hi Rahul,
The Classification data in material master can only be maintianed at Client level and not at plant level.
The standard Class type 001 can be used to create your own classes. Create a class for each applicable plant. Add the applicable characterstics under every class. That way you will be able to maintain plant spceific details when you are adding Objects for the material master.
Regards,
kathir

Output type for production order

Hi, when we save the production order, we wants to transfer the prod order header details in legacy system thru idocs. Trying to define output type for production orders in NACE t-code, could not find production order option there. Pls advise in this case how to define the output type for production order so that the header data will be taken by idoc and transfered to legacy. Pls advise.

Hi,
production orders don't have output types like SD orders.
But they have status control and events. Look into the object type BUS2005 in transaction SWO1. There you find the events which are fired by SAP, eg. ProductionOrder.Released.
Which Idoc type do you want to use?
I think you have to programm your own method for the Idoc creation. Put it into a workflow task and assign it to the event.
Regards
Michael

Configure another Inspection Type for Production Order

Hi QM Gurus,
I have one scenario, my client wants to have another inspection type for inspection lot origin goods receipt from production because they have this requirement that for some materials they need to have a status profile that will be active for inspection type standard 04. And there are also some materials from goods receipt from production that does not need status profile. Since the only thing that we could assign as specific status profile is to its inspection type. Hence, i need to create another inspection type for lot origin goods receipt from production aside from inspection type 04 that will create automatic inspection lots with different status profiles.I try this in configuration but no inspection lots has been made for new inspection type assigned to LOt origin 04 and also assigned in the material master inspection set-up. How will i do this???
Thanks.
Regards,
Matildo, Edsel
QM Consultant

Hello Edsel,
you can configure for example an inspection type 0401 and activate this inspection type for the inspection origin 04 in customizing. Please look at the following customizing items:
Transaction QCC3
-> Inspection Lot Creation
- Maintain Inspection Types
- Maintain Inspection Lot Origins and Assign Inspection Types
By activating the correspondent inspection type in the material master you can decide which inspection type is used. If you need both then you could think about using the exit QAAT0001 to assign the correspondent inspection type.
Regards
Isabelle

Customer Subcontract Stock for Production Order

Dear All,
We have create a Subcontract Sales Order from VA01. Now after MRP run, we have a Planned Order which in turn will be converted into a Production Order.
The Finished Product contains a BOM, the Production Order in turn contains a list of the Raw Material Components. The scenario is as below.
Finished Product A
Raw Material Component B1
Raw Material Component B2 <- Material from Customer Subcontract (Booked into SAP system using Mvt 501 - E)
Raw Material Component B3
Raw Material Component B4
In case we want to issue material to this Production Order, system is requiring me to issue the Raw Material Components from Sales Order Stock (Special Stock E) for all components B1, B2, B3 and B4.
But for my case only B2 is the Material from Customer Subcontract and all other Raw Materials B1, B3 and B4 are from inhouse.
I would like to ask is there any method to modify the Production Order so that B2 is issue from Sales Order Stock where as for B1, B3 and B4 are from the normal unrestricted stock.
I have checked in the Plan Order but it only allows me to change the stock type for the whole Production Order. Does anyone knows how to set only particular components in the Production Order to be issued from Sales Order Stock?
Thanks.

"Dependent requirements ind. for individual and coll. reqmts" (MARC-SBDKZ) on MRP4 of material master is used to control whether the components are managed in the special stock segment or not in MTO environment.
(Discussed many times on the forum.)

Custom movement type for automatic movement

Hi,
We are doing cycle count inventory using warehouse management. When we clear the difference, system posts material document with movement types 711 or 712 for loss or gain.
We need to clear the difference for some materials using seperate movement types for reporting purpose. So, we created new movement types 911 / 912 and assigned the transactions to it in "Materials Management-Inventory Management and Physical Inventory-Movement Types-Copy, Change Movement Types". However, system still takes movement type 711 / 712.
Also, I think if we make it work, it will be applicable to all materials and not certain materials.
Any idea where I need to configure other than above setting?
Shekhar

Hi,
You have created a new movement types, but check whether you have defined this movement types in WM.
Please maintain the Customizing entry in the below mentioned path,
goto >> SPRO->Logistics Execution->Warehouse Management->Activities->Transfers->Define Movement Types
Maintain your entry here and save the customization settings.
This movement types will be applicable to all the material unless and until you specify some special stock indicator while modifying the movement type.

Custom marker types for Prelude?

What would be the way to add a custom marker type to Prelude, that could be used in addition to the default 6 marker types (subclip, comment, flash cue, weblink, chapter and speech)?
I would like to have an ability to add a set of properties with a specific in-out time boundary to clips. Looking into the CC Extension Builder and going through the Prelude API docs, but haven't found info on this yet.
Through this forum, I understand that one can define a custom metadata schema, but that seems to allow new metedata for the entire clip, without the in-out time.   I also see that Prelude provides an UI to define marker templates, but it seems like templates would be based on existing marker types, thus I cannot add new property set(s) there.

Hi Lei,
I've put together a simple proof-of-concept build, and I have a bunch of questions(again). May I ask you to take a look at the build here and share your insight when convenient?    Please let me know if there's a better place to do this than this forum.
In general, it is great that custom markers and their base properties can be viewed alongside the standard markers. I think it makes sense that our extension is responsible for providing UI for creating and editing the details of these markers. I'm wondering how I can improve the integration of our markers into the existing UI, meanwhile.
1) For the jsx run script error, is there a way to catch it as a caller, as opposed to displaying the alert dialog to the end user?
2) Documentation about the marker xml format in general? What is tagList?
3) Is there a way to create a new marker type button in the "Marker Type" panel without adding an actual marker to the timeline?
4) Any suggestion about better integrating with the Marker Type, Timeline and Marker Inspector panels in general? For example it'll be nice if we can set color for our markers, if our markers can be grouped in subcategory in the pull-down menu, etc...
5) Related to (2), it's not clear to me what the allowed characters are for xml. I'm seeing that newline and blackout characters seems to be a problem in xml for addMarker call.    Is it intentional? I also saw that a single-quote goes through, but occasionally (not always) comes back as "apos;" in the xml for that event's callback, example below.
<key>cuePointParams</key>\n<prop.list>\n<key>object-caption</key>\n<string>As a failsafe, ark-brains were programmed to preserve Votan life by any means. In this case, that meant temporarily repairing the damage to Sukar caused by the Razor Rain storm. Unfortunately, some ark-brain fragments became damaged when they fell to Earth. These corrupted AIs built new bodies for themselves out of scrap machinery. You'll see them in the video game...they're called Scrappers.</string>
Thanks much,
Chihiro

Predifined set types in product category

Hi forum,
the pre defined set types viz comm_pr_shtext,comm_pr_unit.... are not visible in the category(service) which is assigned to the hierarchy.so creation of products under this category is not being allowed by the system.are there any settings to correct this.plz guide.points guaranteed.
thanks in advance
shridhar

hi,
i have replicated the problem in my system, it is working fine.
answer the following:
have you created a category for service for a base hierarchy, say "Service"?
Have you specified the product type while creating this category?
Have you selected/ checked 'Product/object Assignment Possible' ?
have you created another category for your purpose say "Maintenance below the above category "Service"?
if you have done the above steps, you should be able to assign the SAP provided set types to this new category.
otherwise raise a note to SAP.
regards,
Rishi

Custom data types for Web Service services

Instead of language primitives (int, double) or Strings, is it possible to define custom data types (i.e. classes) for use in a service method argument or as a service return type? For example, if I create a class called MyClass then could I use it as an argument n a service as follows: someServiceMethod( MyClass myClassInstance). A service returning the custom type might look like this: MyClass getTheClassServiceMethod(String someString). Are either of these ideas possible?

Hi there,
you can use your own classes as service method argument or return type. But you should not forget to do a type mapping on both the service and client side.
I can tell you, how I am sending and receiving my own datatype called "FileBean" which is a simple JavaBean with getter() and setter() methods for the properties.
I'm using axis for deployment and tomcat as the web server, where my service runs on (currently only local but in future this will be remote).
Service class: "InstallationService.java"
Bean class: "FileBean.java"
Client class: "FileSaving.java"
My deploy.wsdd file has the following entry:
<beanMapping qname="myNS:FileBean"
xmlns:myNS="http://packageDelarationBackwards"
languageSpecificType="java:packageDeclaration.FileBean"/>
...The method header in my service:
public FileBean storeAttachments(FileBean file)The important part of my Client:
QName qnFileBean = new QName("http://packageDelcarationBackwards", "FileBean");
call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpointURL) );
call.setOperationName(new QName("InstallationService","storeAttachments"));
call.setReturnType(qnFileBean);
call.registerTypeMapping(
                        FileBean.class,
                        qnFileBean,
                        new BeanSerializerFactory(FileBean.class, qnFileBean),
                        new BeanDeserializerFactory(FileBean.class, qnFileBean));
....After deploying the service and starting the server I can send my "FileBean", work with it and give it back.
Hope this helped. If you need more information, just let me know.
Steffi

How do I check Business object set type for a particular field

Hi,
I have a requirement to make the DESCRIPTION field editable for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
Goto SPRO->SAP Supplier Relation ship Management
                         ->SRM Server
                             ->Coss applications and settings -> Extensions and Field Control
                                      ->Configure field control->configure control for fields substructure (in tabs field)
Bus. Object Set Type 32
Structure Field Name   DESCRIPTION
Bus. Object Type        BUS2121
Set Level                    ITEM
field editable               checked
But for Internal Goods and Service which Bus. Object Set Type should i use to achive this
Thanks
Vivek

Hello Vivek,
Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
Regards,
Arun Singh

Custom Set Types for Products

Similar Messages

Maybe you are looking for