Custom Setting for Frame and kb/s

I have an edited project I need to upload. I need to compress it at 320x240 with 500 kb/s with 15 fps and h.264.
Compressor has defaults with 320x240 at 300 or 800 but not 500. How do I select this?
How do I select frame rate to 15fps?
d-

Select your setting, then under the Geometry tab of the Inspector, change the frame size to custom. Frame rate is under the Encoder tab.
All of this is well documented in the manual.

Similar Messages

  • Export in iPhoto offers a "Custom" setting for size. The default is 1000. 1000 what? Pixels, centimeters, MB's?

    Export in iPhoto offers a "Custom" setting for size.
    1000 is the default, but I don't know what 1000 refers to.
    Pixels, centimeters, MB's?
    I want to make the photo an 1 inch x 1 inch.
    Do I go up or down from the 1000?
    Thanks

    Pixels.
    For a 1" x 1" photo first crop the photo square.  Then export  with Kind = Current with JPEF Quality = Maximum and Size = Full size.
    Then when you go to print the photo select a 1" x 1" print size.  This will squeeze all available pixels in each dimension into the 1" dimension giving you the highest DPI resolution available from your image file. 
    More about DPI can be found here: All About Digital Photos - The Arithmetic of DPI and All About Digital Photos - The Myth of DPI
    OT

  • To build some Custom reports for Sales and Distribution

    I want to build some Custom reports for Sales and Distribution.
    I do not know how to do that.
    I reviewed lots of threads earlier, but couldnt understand how to do that.
    If any one can send me suitable step by step guide, I will really appreciate it.
    Or send me some link or some documents with couple of nice exampples of how to do that.
    Which setting to make in B  ex and everything.
    I am new to BI.
    Please advise.
    Points will be awarded

    Hi,
    Could you be more specific about your requirement. I could understand that you wanted to know what all are the Customer sales reports could be provided in SD.
    Generally irrespective of projects few reports are considered as baseline reports for any SAP implementations.
    For example: 1. Order intakes daily
                          2. Order intakes monthly
                          3. Order magin (daily,monthly)
                         4. Order analysis.
    Best regards.

  • Can we custom set workflow throttle and batch size in Office 365 SharePoint online ?

    Hi All,
    I am new to sharepoint online administration. I want to know that can we custom
    set workflow throttle and batch size in Office 365 SharePoint online ?? likewise we were able to do in SP Farm environment using stsadm cmdlets.
    Can we use SP Online management shell to do the same ?
    Please help !!!

    Thanks for the reply...
    But then how can I optimize my workflow against these properties in Sharepoint online site environment  ?
    Throttle
    Batch size
    Timeout
    Workflow timer interval
    AutoCleanUpDays ()
    refer : http://www.codeproject.com/Articles/251828/How-to-Improve-Workflow-Performance-in-SharePoint

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

    I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I cant turn on the coockies when i go to the tools --- options--- privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

    i cant turn on the coockies when i go to the tools --->options--->privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

    Note that the "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.<br />
    Firefox shows the "Use custom settings for history" selection as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History" (Never remember history means that Private Browsing mode is active).
    "Use custom settings for history" stays selected if at least one of the History or Cookie settings is not the default to make you aware that changes from the defaults are made.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • ON RESTORING 1601 ERROR COMING HOE WE SET SECURE SETTING FOR RESTORE AND UPDATE

    ON RESTORING 1601 ERROR COMING HOE WE SET SECURE SETTING FOR RESTORE AND UPDATE

    If you don't have a sim card in the phone, you won't be able to activate it. You can't activate any GSM iPhone without a valid sim card installed in the phone. The sim itself need not be activated, but it must be valid & present.

  • Sorting with layout set for NewsBrowser and custom made properties

    Hi
    I have developed some custom made properties that is used for each document based on XML Form. But how can I obtain a custom sorting order based on my properties.
    After created a document I define some properties for company, department and process. And using the layout set for NewsBrowser I will have my documents sorted due to my processes. Lets say that I have set the properties for the process for some documents, e.g. SA1010, SA1010-1, SA1010-1a, how to obtain this sorting order in a KM-Navigation-iView using layout set for NewsBrowser?
    Regards
    Kay-Arne
    Message was edited by: Kay-Arne S.  Aarlie

    Hi Kay-Arne,
    A namespace defines a system area in which a property (defined by a property ID) is allowed to exist only once. So for your own predefined properties you should use an own namespace in order to be able to use a Property ID that is already available in another namespace. Check this link for more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/9a4a3b80f2ec40aa7456bc87a94259/frameset.htm
    In the Property Definition you later use the Namespace Alias. This alias (with ":PropertyID") you would also use in the LayoutSet Parameter mentioned above.
    Hope this clarify things ,
    Robert

  • Creating a custom dictionary for Acrobat and Reader.

    I want to create a custom dictionary to be used by all of our users when they access a “forms document” through Adobe Reader/Acrobat.
    Here are some of the issues:
    The default dictionary name under Custom Dictionaries has a .clam extension.
    Is there a way to edit this?
    Does it contain the index settings for all the other added.txt and excluded.txt dictionary files?
    The Reader's default location is under a user’s LocalLow folder.
    C:\Users\PIN\ AppData\LocalLow\Adobe\Linguistics\Dictionaries\Adobe Custom Dictionary.
    The Acrobat default location is under the user's Roaming folder.
    C:\Users\PIN\ AppData\Roaming\Adobe\Linguistics\Dictionaries\Adobe Custom Dictionary\.
    This is buried under the users profile and we need to be able to update these files on all the user’s workstations prior to log on.
    This could be done by redirection of the new custom dictionary. What is the location of that setting in the registry?
    Is there is a way to append to the standard dictionary file so as not to replace any setting that a user may have made to the dictionary?
    Is this done to the .clam or .txt file outside of the Adobe Reader application?
    What is the “All” setting in the dictionary?
    Does that imply the program will look through all the dictionaries?
    Is there a way to create a new dictionary name that would appear under the preferences\spelling\dictionaries list. Is there an Index file that would point to a newly created Dictionary folder?

    Custom dictionaries must be created with a 3rd party program provided by Proximity (http://www.proximitytechnology.com/spell_correction.htm).
    The spelling support files are installed in this directory for all users (this is only the default)
    C:\Program Files\Adobe\<product>\Resource\Linguistics\Providers\Proximity
    File types include:
    ENV - eg: grmphon.env - the phonetic rule file for the spelling dictionary language. There is one of these “ENV” file for each language.
    CLX - eg: grm32.clx - a language related part of spelling dictionary. There is one of these “CLX” file for each language.
    LEX - eg: grm104.lex - an actual spelling dictionary. There may be several dictionaries for a given language, for example, grm104.lex, grm10401.lex.
    So the answer is:
    Create a custom dictionary with Proximity and use the Wizard or some other method to deploy the files in the correct location.
    Ben

  • I have selected "Use custom settings for history" and pressed "OK" but it defaults back to "Remember history", how do I stop this?

    I have to enable cookies in order to have an online purchase credited to my mileage account. So, I opened Firefox Tool and selected Options then Privacy. There, I changed "Remember history" to "Use custom settings for history," as, this will achieve what I am trying to do. However, when I press "OK" the box jumps back to the Privacy box and I see that "Remember history" is still the setting. What steps do I take to prevent the Privacy box from defaulting to "Remember history" when I want to change that setting to something else?

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    Do you have a problem with the cookies?
    You can inspect and manage permissions for the domain in the currently selected tab via these steps:
    *Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
    *Click "More Information" to open "Tools > Page Info" with the Security tab selected
    *Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • Disabling the customizing request for GJG1 and GJG2

    Hi,
    Our configurator are customising the data in the 'Change actual distribution cycle for joint venture' segments. For every segment / distribution cycle  change, its prompting the customizing change request. we want to avoid creating customizing request for every segment and treat this as master data. The transaction is question are GJG1 and GJG2 and Tables:  T811C, T811F, T811K.
    Is there a table or transaction where it can disable from creating a transport in STMS  for each change for segment allocation?
    how to change the Assessment Cycles not be a transportable?
    Appreciate any help
    Thanks,
    Sunil

    Sunil,
    ideally in Production , these will be set as non editable , and hence the request is being created so that the same can be transported.
    If this is happening in Dev , how do you want the changes to be carried forward ,
    otherwise if it is in PRD , is it allowed to create local objects in production ?
    This will be a BASIS setting .
    Arun
    Assign points if useful ..
    P.S I don't think this is the right forum for this post , suggest you try the ERP forum instead..

  • Setting Nattress frame and exporting

    Hi all. I shot with a panasonic SD5 in AVCHD,PAL, convert in AIC and work in finalcut.
    In the final sequence i insert nattress film effect setting 30 frame for a film effect. (PAL - needs 30). When exporting with compressor, how about the frame rate setting??? I have to leave 25 as default?

    Because the plugin works for both NTSC and PAL, the settings are so that the PAL setting is in brackets, so you get 30p (25p) which means the result will be 30p in an NTSC timeline or 25p in a PAL timeline. The end result will be 25p and yes, in Compressor it should be at 25.
    Hope that helps,
    Graeme

  • Custom Report for slow and fast moving items

    Dear Xperts,
    My client wants to develop a new report for slow and fast moving items, I checked the std report MC46 however as per std SAP design this report does not consider the special stock like project stock (Q)...could you please help me to know how can develop this new report with following input and output fields?
    Input fields:
    Plant
    Material
    Material Group
    MRP Area
    Special Stock Indicator
    Special Stock (Type)
    Output Fields:
    Material
    Material type
    Material group
    MRP Controller
    MRP Area
    ABC indicator
    Material price
    Category field – Slow, Fast, Non-moving
    Current Stock
    Last Issue Date
    Thanks in Advance
    Regards
    Rahul

    Dear Rahul,
    If you required  project stock and consignment stock with valuated stock report in same place you need to generate new info structure as given below link. Or you can go with customized report with abaper.
    Info structure validation
    Regards
    Sanjeet Kumar

  • Having custom text for 'Actual' and 'Target' in Funne chart

    Hi,
    We see 'Actual' and 'Target' label values in funnel chart when we hover the mouse on the chart.
    But i need to change the text to custom text for SINGLE graph. I dont want to chnage any xml or config files, I need this change in single report only.
    Appreciate all your posts which helps.
    Regards
    MuRam
    Edited by: MuRam on Dec 31, 2012 7:36 PM

    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Maybe you are looking for

  • G780: dual boot Win 7 and Linux

    I have a G780 with win7 pre-installed. When I tried to get GNU/Linux Mint Dual-booting, the wifi-driver didn't work and most importantly, I wasn't able to make a new partition because there were already four: the boot-partition, the windows-partition

  • QM lot with Handling Unit Mgt in MD04

    Dear All, It seems it is not possible to see the inspection lots in MD04 when using HUM. Any ideas what development is required to make these appear in stock requirements list?

  • SCXI-1001 possible overheatin​g

        I'm using an SCXI-1001 chassis to aquire analog signals and provide output for controls.  The system had been working perfectly for weeks until, in a recent test, all the input signals were suddenly recorded as zero.  Here are the exact symptoms

  • IPad won't print ... iPhone prints fine

    My new "New iPad" will not see my printer, an HP LaserJet CP1525nw. When I try to print, I get the error "No AirPrint Printers Found." The printer is fine and on the network. It is on "the list." My iPhone will see it and print to it without problem.

  • Importing updated certificate into Wallet Manager on Oracle 904

    I have a certifiacte currently installed on our Oracle Application server that is about to expire. I went to our certifiacte provider and renewed the certifiacte for another year. I got the new certifiacte file and have copied it to the folder. I ope