Custom Slide Size!!!

Hi,
I'm having trouble resizing a slide, and I was wondering if someone could help?
I am using a custom size, and got it down to 1500 X 200, I need it to be 1500 X 125, but it won't let me reduce the height to that setting. Can anyone tell me why, and is there a way to do this?
Thank you,
Todd

It appears that 200 pixels is the smallest that either dimension can be. If you need something that size, you would probably be better off using a graphics app. That said, if you are running Leopard, you can create your slide at 1500 X 200, then use the utility Grab.app to select a 1500 X 125 section of the slide.
This presumes that you are just creating a graphic, and don't need to run a slideshow. As far as I know, there is no way to present slides smaller than 200 pixels on any side.

Similar Messages

  • Creating a Custom Slide Size

    I am trying to create a custom slide size: I figure there is a simple way to do so, but I cannot find it.
    Any advise?
    Thanks in advance!
    Matt

    In the Document Inspector, there is a dropdown menu that sets the slide size, and one of the options is "Custom slide size...".

  • Where did "custom slide size" go in Keynote 6?

    I just upgraded to Maverick, and the new Keynote, but can't find the option to change my slide size. Used to be inside the old inspector, under document, custom slide size. Help, where'd it go?

    Click the "setup" cog on the upper right.
    and, towards the bottom, you'll see "Slide Size".

  • Is there a way to adjust a slide size beyond what the presets are?

    You know how different templates have different sizes maxes, such as in these examples:
    Well is there a way to make a smaller template, larger? A lot of the templates that I'd really like to use in my project, are just too small.

    Yes, in the Document pane of the inspector, towards the bottom, you'll see "Slide Size" click the button next to it and choose "Custom slide size..."
    Now, when you put in this new size, and it stretches your graphics larger, they may not look as nice as you want, but that's how you change the size.

  • 3 by 1 slide size

    I would like to have my slide 3 times as wide as it is high. There is not a custom size setting and no 3 by 1 equivalent in my options when starting a new slide show. How do I do this?

    After you create a slide show, in the Document Inspector, under the Slide Size popup, select "Custom Slide Size…" and enter your desired slide size.

  • Maximum Slide Size

    Anyone know if Keynote has a maximum slide size? I'm trying to create a Keynote presentation with a slide size of 4272X1080 and it won't seem to let me put that size in the custom slide settings. I've tried different sizes, but anything above 4000 gives me the error tone. Anyone else had luck entering a larger size? I'm wondering if 4000 may be the max Keynote will allow.

    scooter22 wrote:
    Anyone else had luck entering a larger size? I'm wondering if 4000 may be the max Keynote will allow.
    4000 is the max for Keynote.

  • Setting up the correct custom project size size for keynote presentation in FCP 7 or motion?

    Hi...anyone else do this?
    I have been creating and editing films in FCP (not X) for years now and have got into creating the whole presentation for clients awards ceremonies etc. via Keynote on my iPad via HDMI to HD projectors and it looks amazing and is seamless on the night. No need for crappy powerpoint slides and jumping to low res DVD films - its all controlled via my iPad.
    But i want to up the creativity of the presentations - at the moment we import the films as mp4 HD QT files and jpegs of the speakers/nominees/titles screens etc. created in Photoshop and put the whole thing together in Keynote on my iPad. It worked a treat and my clients love it!
    Now i had a thought and did a test and created Motion graphics versions of the speakers titles and nominees screens in Apple Motion - so that they had an animated section at the start with whoosh audio stingers as they are played and not just stills - and then export them as QT files - import to FCP 7 timeline and export to compresser ready to convert to mp4 for Keynote.
    This way i can extend the static part of the screen after the motion graphic part to say 10 mins as i never know how long the speaker will be on stage.
    Then when the speaker moves on the next item i can hit the ipad which will move to the next presentaion screen!
    Q. Now ive been doing these as HD 16:9 screens - but when imported to Keynote I have a white band top and bottom on the screen so i really need to start with a template screen size of 1024 x 768 for Keynote and also keep this size in FCP 7! And also export to Quicktime as the same size.
    When i do static jpegs to import into Keynote i just define the pixel canvas size - 1024 x 768 @ 300dpi in Photoshop and it works fine but im not sure what to do in Motion or PCP as I have always created my films in 16:9 HD widescreen preset!
    Anyone else doing this and got a solution to my problem and can help with custom project sizes in motion and FCP 7!

    1024x768 is 4x3.  2048x1536 is 4x3.  Both of these are current display dimensions for iPads 1-3.
    HD video (1920x1080 or 1280x720) is a 16x9 aspect ratio.
    Try putting a rectangle in a square. Unless you scale the retangle up and lose image on the sides you will not be able to properly fill the entire 4x3 display area. The easy compromise is letterboxing to ensure all of the rectangle is display in the square. The iPad is doing this with very little effort on your part.
    In FC you can create a new sequence and go into the settings and customize it to 1024x768, 2048x1536 or
    just about any other dimension. Even If you create a custom sequence at 1024 or 2048 in FC you will see the same results that the iPad is giving you with much less effort, render and conversion time (presuming your keynote workspace cannot change in dimensions or aspect ratio and you are unwilling to crop your 16x9 aspect ratio video to fill the space.) 

  • Minimum slide size change

    I would like to make a banner or rail slide (720x90) but cant seem to make any slide less than 200pixels (H or W). I would like to export as fla after.
    How can I make a slide smaller than the custom size will allow? (under 200 pixels either way).
    Is there a way in the code somewhere to set the min sizing different than the 200?
    thanks...

    BobInIndy1 wrote:
    1) is there a way to use keynote in a slide size that fills the screen you are using (ie no letterbox) without destroying your presentation when you change the slide size back?
    If you need to present in different size ratios (e.g., the 4:3 of 1024x768 vs. widescreen HD of 1920x1080) it is wisest to create two separate presentations. Since the slides are of different proportions, there is no way to automatically scale the slides and preserve the proportions.
    Do note that Keynote does have preferences that allow you to have a presentation fill the screen (as much as possible) -- in Preference, under Slideshow, check "Scale slides up to fit display". This option will not stretch your slides, and so again if you are using an HD-proportioned monitor with a 4:3 presentation, it will leave black space to the left and right of the presentation.

  • Can I set 16:10 (1920x1200) as default slide size?

    Does anyone know if I can set the slide size to 16:10 as default rather than having to go in change it from 16:9 to custom each time I open a new slide?

    @Nick
    Not sure if you have gotten much help or figured a work around but here is something you might find useful, if not now, later.
    http://www.macupdate.com/app/mac/24285/set-software-update-server
    It is a great, simple, and small app which modifies the SUS plist in the user to your SUS address or can reset it back to the Apple default. Regarding the different names that are popping up, not quite sure what that is about but I would check your DNS Zones using Server Admin and make sure that all are set up with the correct schema.

  • Patch 8.0.1 negates custom popup size [RH8 html, Webhelp]

    I installed RH8 patch 8.0.1, and am finding the custom pop-up sizes I set are no long in effect.
    Per our approach, we insert an image into its own html topic.
    The image is then called as a pop-up in a step-by-step topic.
    Prior to the patch, the pop-up window size was 5-8 pixels taller and wider than the image and displayed with a nice white margin:
    Pop-up settings for this image: Display in custom sized pop-up
    Following the patch installation, the pop-up defaults to a scrolling window, irrespective of the custom window size.  i.e.  I tested custom sized pop-ups that were 5 - 15 pixels larger than the image width and height dimensions, and all resulted in the same size window, with scrollbar, as shown here:
    What can I do to recover the image pop-up displayed without scrollbars?

    Peter,
    I'd given up on this problem and uninstalled the 8.0.1 patch.   We have 1265 image topics, with multiple pop-up instances for each image topic.  I need a correction for every custom-sized pop-up.
    I can see the decision not to install the upgrade was short-sighted, however, as the next patch 8.0.2 is critical if we hope to have a stable project.
    How would I use search and replace to revise 1265 custom pop-up sizes?  Can you demonstrate given the example above?  The image is 200x135.  The pop-up size in the existing project is 205x140.  With the new patch, the pop-up size needs to be 213x158.  What do I use as a search term in a mass search and replace to avoid fixing one pop-up at a time? Surely you don't suggest I find the code and do the mental math to add 13 and 23 to the original dimensions for 1265n pop-ups?  Sorry if I'm missing the obvious.
    Is there any chance I can use search and replace to modify the html to insert something like, scrollbars=no, instead?
    On another tact, external research suggests the scrollbars disappear in Internet Explorer if I work with the css properties governing scrollbar colors, as referenced here so the color matches the background window color.
    From http://www.webdevelopersnotes.com/tips/html/transparent_hidden_scrollbar_code.php3 :
    Here are the cascading style sheet properties once again.
    Note: These properties are recognized by Internet Explorer (5.5 and above) and are ignored by FireFox, Opera and Netscape.
    scrollbar-track-color: Sets the color for scroll bar track
    scrollbar-face-color: Sets the color for the scroll bar slider
    scrollbar-arrow-color: Sets the scroll bar arrow color
    scrollbar-3dlight-color: Sets the scroll bar 3D light color
    scrollbar-highlight-color: Sets the scroll bar highlight color
    scrollbar-shadow-color: Sets the scroll bar shadow color
    scrollbar-darkshadow-color: Sets the scroll bar dark shadow color
    Any help is appreciated!

  • Unable to create Keynote Keynote in 2048x1536 px. for iPad w/ retina display. This option doesn't appear under "Slide Size". Keynote 5.1.1.

    I have tried creating a Keynote document for iPad 3 but 2048x1536 does not appear under thre options for slide size.
    The biggest is 1920x1080. I have updated all software and Keynote is on the latest version 5.1.1. I have tried on two different machines but I get the same issue.
    Any ideas what it could be?
    Any help appreciated.
    Thanks.

    you create a custom size:
    inspector > document > slide size

  • HP Officejet Pro 8100 ePrinter & custom paper sizes

    Have found all the helpful instructions about creating new custom paper sizes in Windows 7. But am complete novice & need to buy a printer for a charity. Settled on this model because of good reviews but most work will be 1 document of custom paper size. Need to know if the instructions given are fail-proof!! (Before i spend their money.)
    This question was solved.
    View Solution.

    Hello invqn,
       after having performed some detailed research, as well as installing the Pro 8100 (and other products) on a Windows 7 system, we determined the Pro 8100 doesn't support Custom Sizes:  that was by design and intent.
       Note that one of our engineer's proposed using a different set of drivers (from an older device) as a potential work-around, but this is unproven and may serve to limit your overall functionality of the device.
       However, we did confirm that a newer device that is currently out, the HP Officejet Pro 8610 (or 8620 or 8630) e-All-in-One, DOES support custom sizes; these are multi-function printers.
        Using the instructions in the link you sent, you can create new Forms with custom sizes and it will show up in the Printer Properties for you to use/select. It supports custom sizes from 3.00 x 5.00 in. to 8.50 x 14.00 in. 
       Our intent is only to provide information on what we know; you might take a moment and perhaps see if an HP Marketing representative might be able to give you more information, but that's what we have.
       We hope this helps....
    Regards,
    HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
    How to Give Kudos | How to mark as Solved

  • Custom Paper Size : Migrating from 6i to 10g report server engine

    Hi,
    pardon my bad english !!
    I'm studying to migrate form/reports 6i to 10G. In report 6i we have reports with custom paper size ("A5" format that is half of "A4", 15x21cm).
    In report server 6i environment (Win2000 server) we have done this configuration.
    - We configure printer; one input tray has "custom" format.
    - We create an OS user (es. CustRep);this user has a "default printer" that has input tray with "custom" format as default tray.
    - We create a new report server (es. CustRepSrv); this report server start as service with CustRep user credentials.
    - Every report (PDF format) generated and printed (destype=printer,desname="My Printer") with CustRepSrv report server get custom format as paper size and so fit with Custom tray definition on the printer.
    Can I do the same in report server 10G environment ??
    Thanks
    Andrea

    Using these and not hearing much bad
    Init Engine 1
    Max Engine 6
    Min Engine 0
    Eng Life 10
    MaxIdle 30
    Trace Error
    Trace Replace
    I set my Report Server Parameters
    CACHE SIZE - 700
    CACHE DIRECTORY = (you have to decide)
    IDLE timeout 120
    Max Connections 120
    Max Queue Size 4000
    trace options = trace_err
    trace mode trace_replace

  • Z3200 won't print to custom page size

    Hello,
    I've created a banner that is 23"w x 82"h (in CorelDraw Suite 4).  The page setup of the Corel file is 23" w x 82"h.  I've been trying to print it on the z3200 designjet, but have had no luck.  I created several custom page sizes (23" x 82", 24" x 85", 24" x 82") using both the "Printer Properties" dialogue within CorelDraw as well as adding a "Form" in the "Print Server Properties", none of them work.  I've set the correct paper (24" wide HP Bright White Bond, feeding from the roller) on  the actual printer itself, and in the Printer Properties.
    I've played around with all of the different settings that I can and sometimes see the following error message:
    [1/1]Paper size selected (width:23.00 inches, height: 82.00 inches) is larger than loaded paper (width: 24 inches).  Please verify your printer setup.
    When the page prints, it is resizing the content to be 8.5" wide.
    I don't know what I'm missing.  Any advice would be greatly appreciated!
    Thank you in advance,
    Karen )

    I'm having the same problem here in China as well; and I've talked to the tech support in my region and no help. Called the province HP tech rep and he has no clue at all.
    Does any Tech/Eng here could help us? Otherwise there's no reason for me to use you guys machine anymore...

  • Photosmart C410: How do I associate a custom paper size with the photo tray?

    Our Photosmart 3310 recently broke down and I purchased a C410 to replace it.  I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes.  With the 3310, I had figured out a way to print the envelopes from the photo tray.  While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
    One of the reasons I got the C410 was for the photo tray.  It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope.  Well, unfortunately, that's what I've been doing.  I select the photo tray in Word, but the printer goes right ahead and prints from the main tray.  I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
    My problem is that the software interface for the C410 is different than that for the 3310.  I can't figure out how to associate a custom paper size with the photo tray.  To test my theory this evening, I told Word that my envelope size was 5 x 7.  The printer didn't hesitate to take an envelope from the photo tray.  Of course the return address went into a dark void because the envelope is not 5 x 7.
    The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets."  The C410 only has printing shortcuts.
    If anyone can help me, I'll be very grateful!  I've probably spent hours trying to get this figured out, and I have no idea what to do.

    Hi,
    Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
    From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
    From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
    You need to select right custom size from the application.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for