Custom Solutions in ERP and How to Size

Greetings,
I'm currently at a project where we are developing a custom solution. The Quick Sizer will not help since most of the functionality will not come from core. I need to develop a list of quiestions (data requirements list) which would help better understand the functionality to be implemented. Does anyone have any information that could help me. Thanks in advance....

Will Close due to no response...

Similar Messages

Should I leave Verizon with one month left on my contract so I can upgrade? The ETF seems worth it considering the bad customer service I received and how long I've been with Verizon.

I've been with Verizon for a really long time and one of the best things about their upgrades was that they used to allow you to do it a little early. And since you dont really keep up with plan changes until a new phone comes out or you are closer to your upgrade eligibility date, I didnt realize that they changed this. My phone is on its last leg. 2 years is a long time for a device that you use every day, 50 times a day. My upgrade date is a month away and I'm considering moving to a different service and letting them pay for my ETF. I have called Verizon asking if there was anything they could do to allow me to upgrade early and they said no. When did this start happening? They tried to sell me the "Edge" but thats the same as paying 700 dollars.

ATT doesnt care how long you've been with them
cox doesnt care how long you've been with them
your eletricity company doesnt care
your gas station doesnt care
your grocery store doesnt care
your car insurance might care , a little.
Just because uncle tommy gives you a discount because he's been cutting your lawn for years doesn't mean a large company would. And why should they?
<< Message was edited by: Verizon Moderator to comply with the Verizon Community ToS >>

Certification process of any Customized Solution in SAP

Hi,
Can someone please guide me on the Certification process of a customized solution in SAP.
Actually i have developed a customized solution in SAP and want to get it certified from SAP as a copyright.
Can you tell me the process or steps of doing that.
Even some links can be helpful.
Thanks in advance.

With the SAP Web AS Java, enterprises can set up their own Universal Description, Discovery and Integration (UDDI) server.
In the below link, it will provide answers to the following questions:
What is the purpose of a UDDI server?
What is the basic architecture?
How do you configure a UDDI server?
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3417ce90-0201-0010-feb3-ae784b36a604]

Deploy custom solutions in multi-server farm

We are trying to migrate all the 2010 custom solutions to 2013 and we have 3 WFE's and 3 APP servers in our farm. Central Admin is on one of the APP servers. So when I try to add the custom solutions in this new farm, what is the correct process in
deploying those custom solutions?
I am thinking to run the powershell commands (ADD_SPSolution and Install-SPSolution) on the APP server where the CA is installed and will this deploy the files on all the WFE's or Do I need to manually deploy on all the WFE's? Is it true that we need
to start the deployment on the server where the CA is installed?
Thanks in advance,
-Aparna.

Yes, You are right.
To Add
Add-SPSolution -LiteralPath c:\contoso_solution.wsp
To install
Install-SPSolution -Identity contoso_solution.wsp -GACDeployment
You have to select the parameter appropriately i.e webapplication url, Compatibility etc
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Add border and change border size and color

How can i add a border on an image and how the size and color of the border to be changed?

Look up border factory and createColorBorder()

SharePoint - Error_1_Error occurred in deployment step 'Add Solution': Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was rea

Hi,
I am Shanmugavel, SharePoint developer,
I am facing the below SharePoint 2013 deployment issue while deploying using VS2012.
If i will deploy the same wsp or existing wsp
(last build) using direct powershell deployment, the solution adding properly, but the same timeout exception coming while activation the features. Please find the below error.
I tried the below activists:
1. Restarted my dev server, DB server.
2. tried the same solution id different server
3. tried existing wsp file (last build version)
4. Deactivated all the features, including project Active deployment configuration.... but still i am facing the same issue.
I hope this is not coding level issue, because still my code is not start running, before that some problem coming.
Please help me any one..... Last two days i am struck because of this...

What you need to understand is the installation of a WSP does not do much. It just makes sure that you relevant solution files are deployed to the SharePoint farm.
Next comes the point when you activate the features. It is when the code which you have written to "Activate" certain features for your custom solution.
Regarding the error you are getting, it typically means that you have more connections (default is I guess 100) open for a SQL database then you are allowed to.
If you have a custom database and you are opening a connection, make sure you close it as well.
Look at the similar discussion here:
The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool
size was reached[^]
I would suggest further to look at the
ULS logs[^] to get better insight.
Manas Bhardwaj's Stream : www.manasbhardwaj.net

When I move a RAW file from IPhoto to my desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file across?

When I move a RAW file from IPhoto on my macbook pro to desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file to move across?

I create separate folders based on the year and then the actual date of when I take images. You can make those folders anywhere on any hard drive that is connected to your Mac whether internal or external. I also use the Photoshop Photo Downloader that is included with Photoshop/Bridge and it will create the date folder so all I do is create a Year folder.
Open Bridge or click on the Bridge icon in PS and in the File menu item in Bridge select "Get photos from Camera". It can be a camera connected to your Mac or a memory card from a camera. A window will open and you then select the camera or memory card. Set the location they will be downloaded to, just the folder and you can Browse to a folder that you created, then in the "Create Subfolders drop down select what date stamp you want to use or or custom name or not to create subfolders at all.
I've never cared for iPhoto one bit. I tried it but found it way to restrictive. It likes to have full control over how you interact with your images.

How to correctly identify and measure menu sizes

I've got a project that upon build says it's utilizing less than 4.7G. For that reason I began a build and after hours of processing it said there wasn't enough space even though Encore showed only 4.011G was used and over 600M was still available before the build. Seems like it shouldn't build if it's not going to work out.
Everything has been transcoded or is already converted to MPEG-2. However I've read just about every thread I can find on the subject of dealing with the 1G menu size limit and now a new anomaly, the Times and/or chapters adjusted warning, has appeared. I'm trying to understand how anyone can logically tie these back to something specific to troubleshoot and correct them. Just about every other error links back to the problem so you can adjust it, but these are vacuous.
My first question then is about menus and how a menu actually measured. What determines total file size, the menu itself or the content that is linked from the menu? Why not have a list of total menu sizes so you can see not only the individual file sizes, but the aggregates that impact the menu size limitation?
All my menus are static and link to video clips. My largest clip is about 511M of video and 265M of audio. That one is already converted to MPEG-2. I have less than 4.7G of content to burn to the DVD and appear to have plenty of headroom according to the build menu disk info.
My next question is about a file that Encore says is in use, but it isn't. It could be adding to my overall menu size, yet nothing is linked to it and no chapters appear to be in use with it. It should be an orphan, but not according to Encore. Again, shouldn't there be a logical way to identify that link? Managing a dependency that can't be found is a nightmare. None of the menus or timelines offer any insight about the mystery clip that can't be deleted. I read a thread that said they had a similar problem, but building forced the anomaly out. Didn't work for me.
Then lastly, the time and/or chapter adjusted problem has no suggested corrective action. It wasn't there before the build so why is it there now? Is it due to transcoding? I don't see any obvious changes to the timeline so where is the problem and how does is someone expected to troubleshoot it?
Shouldn't there be a glossary of error codes somewhere with at least some basic explanation?
Seems like a very clunky application, but when integrated with the rest of the Adobe Suite very powerful...if I can ever get a build to complete.
Any suggestions?
Message was edited by: Kevin Nay
So as not to waste anyone's time I'm assuming the transcoding adjusted the timeline/chapters and I was able to solve one problem by adding back in an ending chapter point. Remaining issue is the menu size however.

Encore is being phased out? I would be surprised if Adobe did not offer some kind of DVD authoring solution in it's place. I have not heard about this yet myself.
I have a menu size issue because, despite my reported file size being under 4.7G, Encore continues to report a menu size problem. Of course it doesn't say which menu or by how much it is exceeded. When I build it to DVD it waits several hours before reporting that there is a space issue. See below.
There is a file called woodstock-1.mp4. I can find no use of this clip at this point and it's not part of a timeline, yet Encore won't let it be deleted. Encore reports it's still in use. Surely there should be some way to track down any dependencies quickly.

Can we custom set workflow throttle and batch size in Office 365 SharePoint online ?

Hi All,
I am new to sharepoint online administration. I want to know that can we custom
set workflow throttle and batch size in Office 365 SharePoint online ?? likewise we were able to do in SP Farm environment using stsadm cmdlets.
Can we use SP Online management shell to do the same ?
Please help !!!

Thanks for the reply...
But then how can I optimize my workflow against these properties in Sharepoint online site environment ?
Throttle
Batch size
Timeout
Workflow timer interval
AutoCleanUpDays ()
refer : http://www.codeproject.com/Articles/251828/How-to-Improve-Workflow-Performance-in-SharePoint

I was told by Borders customer service that I have to add them as a "trusted site" to avoid an error message when sttempting to use the shopping cart. Is this true, and how do I do it?

When I go to "checkout" on Borders.com, I get an error message. The message is as follows:
[ServletException in:/ConsumerDirectStorefrontAssetStore/ShoppingArea/ShopcartSection/body.jsp] null'
I have tried refreshing, clearing cookies, and everything I can think of. Customer service told me it had to do with security settings, and that I had to add it to my trusted sites. I have never had to do this before, so I'm jsut wondering if this was true, and how to do it.

Are they multi-function units? Do they include a scanner? Most people call these multi-function copiers, not printers. Printers don't have a scanner in them.
Give us some specifics as to the brands and models you have tried.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

When I download pictures from my camera, they turn out a nice big size in iPhoto; other pictures that have been e-mailed to me or imported from older libraries/other computers show up small. Why is this, and how can I make them all the larger size?

When I download pictures from my digital camera into iPhoto, they turn out a nice large size (usually almost the full screen), but when somebody e-mails me pictures and I import them into iPhoto, or when I transfer old photos from an old library into my new iPhoto library, they turn out very small--not exactly thumbnail-size, but too small to use for calendars or photo books. I don't know much about computers, so I don't know how this happened. Also, I can't find any discernible pattern to why this happens with some pictures and not others--ie: what I described above is usually true, but I have had e-mailed photos or old photos turn out the way I want them, which is in the larger size in iPhoto. Why is this happening, and how can I make all the pictures the larger size?

Some mail programs, including Apple Mail, can reduce the size of images that are attached to a message. It's happening at the sender's end, and all you can do is ask the sender for a larger image.

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

In the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

in the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

cc2014,
Have you selected an image?
Unless a good explanation appears, you may start onthe list below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Custom Solutions in ERP and How to Size

Similar Messages

Maybe you are looking for