Custom Streaming Transport Settings

I can't get QT preferences to retain custom settings for Streaming Transport. I need to see if I am receiving stream via http port 80 or UDP 554. Each time I change and apply settings then close the window, re-open preference the streaming Transport is re-set to automatic
I have Windows version of QTPro 7.04

My location: at work:
If you are using a workplace computer on a local network this may well be the case. A Firewall blocks out all Internet traffic except those services that local network administrators consider essential. You will need to contact your local network administrators and have the University's streaming server included in the acceptable services. There's an adminsitrator's guide to allowing streaming Quicktime through a firewall <a href "http://www.apple.com/quicktime/resources/qt4/us/proxy/proxy.html">here. To check to see that you can access any streaming movie, open the Quicktime Player and clicking Edit > Preferences > Quicktime preferences > Streaming transport. Click the Auto Configure button. Quicktime should confirm that it can use UDP/RTSP port 554. If it switches to http:// port 80, then you are most likely behind a firewall that is configured to block Quicktime streaming files.
My location: at home:
If you have a DSL router with a NAT firewall you will need to configure it to allow streaming media files. Open the Web-based interface for the router, select Advanced and choose "Port forwarding" (wording may differ for your router). Open port 554 for RTSP/TCP data and ports 6970 through 6999 (inclusive) for RTP/UDP data. Consult your router's documentation for specific instructions on configuring port forwarding, or contact the router vendor. To check to see that you can access any streaming movie, open the Quicktime Player and clicking Edit > Preferences > Quicktime preferences > Streaming transport. Click the Auto Configure button. Quicktime should confirm that it can use UDP/RTSP port 554. If it switches to http:// port 80, then you are most likely behind a firewall that is configured to block Quicktime streaming files.

Similar Messages

  • Custom Streams

    Is anyone else having issues with their Custom Streams in SocialCast? We used to get emails from these when we had them setup, but within I am not sure the last month or so, we aren't getting the emails to our email inboxes anymore.
    We use the hashtags, to set up Custom Streams for #helpwanted. However, we aren't getting those emails anymore, so we never know in our company when someone needs help or not.
    If anyone can please help me with this issue that would be great. We really need to get this resolved asap. We just realized it yesterday and had no idea other people were having the same issue.
    Thank you,

    Samantha:
    Thank you for answering my question. I do have a couple of items I need to
    clarify with you.
    1. We have many groups set up for different Teams we have throughout our
    CVA. Does this mean if you are receiving an email notification from any of
    these groups that we have checked under settings in the email notification,
    that you can no longer receive any emails from the Custom Streams we have
    set up? These would't be duplicate emails as you have stated above, it
    would be anytime we use our Custom Stream to received emails if we belong
    to a group email notification.
    2. We use Gmail as our Email client throughout or company, so unless there
    is an issue with SC and Gmail together then we should be getting the
    emails. We receive all other emails from SC, such as when we comment on
    others peoples posts for example.
    3. We have tried re-setting out Custom Stream as well.
    4. There aren't any message from SC in our Spam Folders.
    Thank you for taking the time to reply! Look forward to hearing back from
    you.
    Twila
    On Fri, Feb 13, 2015 at 10:54 AM, samanthalee <

  • In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

    In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
    Are the presenter display setting saved in the file?
    Thanks for your help!

    it wont.
    Presenter note display is set per machine.
    Surprising nobody in this community knew this.

  • QuickTime X Transport Settings

    I'm not finding any way to adjust the transport settings under QuickTime X.
    In QuickTime 7 and prior we sometimes had to have our users adjust their transport settings due to various issues.
    But I'm not seeing any way to adjust the transport settings under QuickTime X
    Does anyone know if it's possible?
    Thanks in advance.

    Hi Mitchell
    Thanks for the 'Share' tip - I never new that existed either.
    Good work
    B

  • Transport settings for ASA's

    Hi,
    Is there a way to change transport settings for archive collection based on groups?  We have ~1100 switches/routers that use telnet and 7 ASA's that use SSH. I have the transport order set to telnet first and then SSH.  This is causing ASA failed password attempts to be logged to the MARS appliance and I don't want the SSH passwords to be sent in plain text.  We are using LMS 3.2.
    Thanks,

    No, there is no way to tie transport settings to certain device types.  It's an all-or-nothing thing.  For what you want to do, set your protocol order to SSH then TELNET.  For the majority of devices, the SSH will fail, but you can be assured that the ASAs won't have that clear text password logged.

  • Customizing for LCA Settings /SAPAPO/OM_CUSTOMIZE

    Hi,
    With abap /SAPAPO/OM_CUSTOMIZE you can do some live cache settings. One option is to compress DP time series.
    Does anybody know what happens when you switch on this setting?
    I have found this report via transaction /sapapo/om00.
    thanks for your response
    Jean Vroemen

    Hello Jean Vroemen,                                               
    -> As you know, the report /SAPAPO/OM_CUSTOMIZE has title "Customizing for LCA Settings".
        This report is used for the customizing some LCA parameters. The settings could be recommended
        by the LCA developers only, if it's needed. Please don’t change any of the LCA customizing
        parameters if you was NOT advised from SAP LCA development support to do so !
    -> The flag "compress DP time series" defines the storage format of time series in DP.
         The LCA development introduced this flag in release SCM 5.0, but this flag is still a project
         for pilot customers only in SCM 5.0.
         If you have interest to participate in this project, please create the ticket to the component
         'BC-DB-LCA', the status of the system SPs stack need to be checked & DP application scenario
         reviewed first.
         As of SCM 5.1 this flag set by default for storing time series data to the compressed format.
         And the report /SAPAPO/OM_CUSTOMIZE run in SCM 5.1 will have the unchecked box for the
         LCA customize-parameter "Non-Compressed Store for DP Time Series".
    Thank you and best regards, Natalia Khlopina

  • Custom Soft Proof Settings....

    Hi....I'm looking for a way to save and load custom soft proof settings in AiCS4. The Adobe help docs say this is possible:
    http://help.adobe.com/en_US/Illustrator/14.0/WS218910C1-B8D3-450b-AC31-9E6EA50C2BAD.html
    ...but my custom soft proof dialog doesn't give me the options. I'm wondering if it's possible.
    Illustrator CS4 v14.0.0
    Thanks,
    Carl Stawicki

    Well I re-did the monitor profiles with PMP 5 and got  the same results - toggling Soft Proof on and off (Cntrl-Y) displayed a darker/yellow image when on.
    Then I re-profiled both monitors with i!Match (I profiled the lesser, an HP-TFT display, and then matched the NEC IPS to it) and now Soft Proof works as it should.
    Why did PMP 5 do this?
    I ran PMP 5 on another Dell with a Dell monitor to see if I had overlooked some step or setting that was crucial and nothing leaped out at me.
    This makes me wonder if I can depend on any profile from PMP 5.
    cvt

  • Migration manager forgets to import custom IAC channel settings

    it looks after "migrating settings" from 10.5.8 to 10.6 that the Migration manager forgets to import custom IAC channel settings.
    cananybody tell me where they are stored and which files i would have to manually copy or do i have to re-create those IAC channels by hand?
    thanks for any input...

    Hi
    The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
    If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
    (Or just set the fader manually in MS)
    CCT

  • Is there a way in Final Cut Pro 7 to save custom Batch Export settings?

    Is there a way in Final Cut Pro 7 to save custom Batch Export settings?

    Don't think so.  Years ago, I seemed to figure out a way in an earlier version of fcp, but when I tried to recreate it, I couldn't make it work.
    You can send to compressor and save custom presets there.

  • [svn] 3486: Updates to support reliable messaging over streaming transports .

    Revision: 3486
    Author: [email protected]
    Date: 2008-10-05 12:51:04 -0700 (Sun, 05 Oct 2008)
    Log Message:
    Updates to support reliable messaging over streaming transports.
    QA: No
    Doc: No
    Checkintests Pass: Yes
    Details:
    Unbind subscription invalidation from streaming connection close. New behavior is for subscription invalidation to be bound to session invalidation, in the same fashion as simple polling or long-polling works.
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/EndpointPushNotifier.java
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    nokia will have this on there NSU by end of month or into next month.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

  • Custom Mpg2 transport stream

    Can I output a file with a custom mpeg 2 TS
    required output 16:9, 1360x768@60p
    Compressor only seems to allow limited output (to standards)
    Tried ffmpeg but the output is disturbingly out
    Help?
    Thabks

    Hi Folks, anyone have any ideas about this problem, I need to deliver this work in the next 48 hours:)
    Thanks
    Lee

  • Custom Camera Raw settings not being recognised after copying to another mac

    Images captured on MacBook Pro and custom settings applied in Camera Raw, images then transferred to Mac Pro via USB are opened on Mac Pro using Adobe Bridge CS6, Camera Raw doesn't recognise the custom setting and opens using the setting used last time in Camera Raw.
    How do you retain the custom settings when transferring images and opening on another mac, the files are CR2 and the xmp files are also copied as well.

    ...and you did copy the xmp files as well as the RAW files to the second computer?

  • DV Stream Export Settings, Locked or Unlocked Audio

    When capturing VHS tapes into Final Cut Express, I always keep my Canopus ADVC110 at the default settings, including locked audio.
    I don't understand why Final Cut Express' export as DV Stream includes a little box to check or uncheck, for locked or unlocked audio. The FCE default is unchecked (unlocked), and I've been keeping it that way during export.
    What does this do to the DV file?

    Ok, I understand. Me too. I archive photos, video & audio - TIFF for stills, AIFF for audio, but for video I wouldn't pick DVStream. It's not really like TIFF or AIFF. DVStream is the format recorded on miniDV tapes and at this point is reaching technological obsolescence.
    If you're trying to digitally preserve your VHS videos, QuickTime Movie would be far preferable to DVStream, technically today as well as considering its forward life. The codecs are the same, but the contents of the files are different. DVStream interleaves the audio, video & control streams (which is why it's so difficult to edit). QuickTime contains parallel video, audio & control tracks.
    If you have captured your material via a Canopus ADVC, you are editing QuickTime/DV-NTSC in Final Cut. When you export to QuickTime Movie you are getting the exact same material. When you export to QuickTime Conversion to DVStream, FCE has to parse all your video & audio and reassemble it into the chunks required to assemble the DVStream file. To use the file in the future you will need software that supports DVStream. Even today, while FCE can work with DVStream, it has to render the audio before it's usable. Doesn't have to do that with QuickTime. There are even more issues, but I think you get the point.

  • Custom TCP/IP Settings for different network connections

    I have about 4-5 different networks I hop onto all the time.
    The problem is my brother will NOT use Auto-configure using DHCP. So, I have to get the settings and put them in everytime, with his static IP, gateway, DNS and the such. Is there a way to save them to that specific connection and whenever my macbook pro sees HIS network will use HIS settings? I mean, it would make sense to be able to custom fit a connection just to his connection.
    So, that when I am on his network I wouldn't have to retype/input his settings because the SSID tells the computer that I am on his network and to use his settings. When I am on different networks it would use the settings appropriate to that network.
    I don't know if that made any sense, respond back if it didn't and I will try to clarify better.

    Add a "Location" for that network configuration.
    System Preferences > Network > Location > Edit Locations
    Then when you want to switch to that network, click on the Apple > Locations and select the Location you set up.
    I have a few locations set up this way and it works well.

  • Not a happy Apps Store customer - changing country settings

    I got the following problem and raised it a few times with NO reply from Apple which is very dissapointing and reflection of surprisingly poor customer service from Apple (with the exception of the customer service here in HK who came back to me quickly. But they could not sort it out for me).
    This year I moved from Australia to Hong Kong and changed without being aware of the consequences the store settings in itunes/apps Store.
    Unfortuntately I got a few apple devices: 2 MBAs, ipad2, ipad, iphone which where purchased in Australia and in Hong Kong. One consequence of switching the country settings is that on all my devices the apps are not in sync and that  I lost all my Australian apps. Its a complete chaos with my apps on different devices and I really regret that I spent money on the app store and now got an issue on how to sort out this mess.
    I read the T&G's and I'm aware of the country specific licences agreement but somehow apple should be able to help their customers in sorting out these constraints due to different laws in different countries. I don't believe one should be a lawyer to buy an app on the app store and to understand the legal implications when buying an app. It's not really the problem of the end consumer who buys legally the licence for an app and then moves country and suddenly doesn't have access to the purchased app anymore. The end-consumer already paid the licence for the app.
    But Apple makes this a big problem for the end consumer of and I'm worried what to do with my apple devices and my apps. The problem is that we currently got ipad for work so I need to get some apps from the store for my work.
    And I'm really ****** off because its now my problem and of the mess on my devices which all got different versions of the apps. My idea was to have all my devices synced so if I loose one device I could easily get a new one and sync it with itunes/app store/cloud as the single source of the truth.
    As a conclusion of above I'm now a very critical user of Mac/Apple Products and I make people, friends and business partner aware of this limitation and problem with the app store. I'm also for the first time looking forward to get my hands on samsung device as it doesn't really seem to matter anymore if my apps/data are automatically in sync as apples promise of a cloud based 'play and have it anywhere" is an empty promise.
    A very disillusioned customer (happy to switch to the competition)

    Thank you both for your very instructive and helpful reply. I can see that open discussions are strongly encouraged in this forum.
    @HACKINT0SH: if I remember one of your replies to another user with a similar problem of switching country setting you recommended to download all apps before switching but with the "side effect" that one will loose the ability to receive updates of the purchased apps once the country setting is switched.
    What exactly is the lesson learned?
    An app or a program is useless if you can't download updates as the app will be unsupported or won't work in future OS releases.
    Hence your suggestion to download all apps before switching is only a short sighted work around solution which doesn't solve the issue of how to receive updates for the apps you bought in your previous country.
    @Dah veed: I hope that above reply explains the problem of users switching apple store due to personal circumstances and not being able to continue using their purchased apps anymore. I didn't screw my country settings as I only moved from one country to the other without being able to move my apps with me. That's all and I would like to make people aware of this problem.
    I only replied to both of you because I found your replies very entertaining and also proves to me that apple is not monitoring their "technical" support forum.
    As a customer who is trying to help finding answers to problems I will nevertheless raise a formal complaint to apple instead of responding to both of you via this post. Perhaps this forum is indeed not the right forum to help solve this problem.

Maybe you are looking for