Custom tab in RTMT

Hello All,
I didnt get proper doc for this. Why we have Custom tab in RTMT tool (Check attachment), is that to configure new alerts apart from predefined alerts in RTMT. If yes, please let me know how to add new alerts in RTMT under custom tab.
-Murali

Hi Murali
Please find the below information :-
1. Go to System--> Performance--> Open Performance Monitoring
2. Find the device type you want to configure the alert to and expand it. You'll need to select a single counter instance to show in the right pane.
3. Right click on it and select "counter monitoring"
4. Right click on the chart and select "Set Alert/Properties"
5. Select the "Enable Alert" checkbox and configure the parameters needed.
6. You will be able to view the alert on the Alert's Custom tab.
Thank you
Please rate all useful information

Similar Messages

Error message does not lead to the custom tab me51n

Hi Experts,
When I try to to create a PR in me51n and check, a popup with error messges appear when we pick one of the entry and select edit button that leads to the field of that concerned tab.I have a custom tab and cutom field the issue is error message is displayed to fill the custom field but when I check mark that error and select edit that does not take me to the custom tab where custom field exists please suggest I have tried lot of user exits but no use.
appreciate your help......

We added some error message checking using Function exit EXIT_SAPLMEREQ_005. How we can bring the screen to Customer Data Tab when there are any errors under the tab. And as long as the error is not fixed, the screen will stay on the tab?
To eloborate my question - in ME51n/Me52n, the system gives a messages window/subscreen with errors or warnings upon clicking the check button or upon save. On the messages window/subscreen, we can select a particular message and edit will take action to the corresponding tab with the cursor on the field with the issue. I understand this is standard functionality.
However I'm looking for a way to make this work for a mandatory field on the customer data tab i.e., when I select the error message pertaining to this mandatory field and choose edit, control should jump to the customer data tab with the cursor on the mandatory field.

Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

Hello all,
I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields.
So, my question is how do I handle line selection in the context of these BAdIs? Is there a way to know which lines have been selected and then only change the data in those items?
I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet.
I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N. However, I haven't found a way to work with it. It doesn't get passed to any of the methods in the BAdIs, as far as I know.
January 27, 2012 **************
We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI. The lines are in the lt_models table.
So, now my issue is getting data to save in ME22N. When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save. It does work when I make a change in another field, like changing the description for instance. I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work.
I'm getting the idea that I'm the first ABAP developer to try this...
Thanks for any help.
Kind Regards,
Chris
Edited by: Chris Mowl on Jan 11, 2012 10:33 AM
Edited by: Chris Mowl on Jan 11, 2012 4:24 PM
Edited by: Chris Mowl on Jan 27, 2012 10:57 AM
Edited by: Chris Mowl on Jan 27, 2012 2:00 PM

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Change the name of custom tab in me51n / me52n / me53n

Hi,
I have to add a few custom fields in PR item of transactions me51n / me52n / me53n. I have used the enhancement MEREQ001 for adding the custom fields. The sytem automatically creates a custom tab with the name Customer Tab for the additional fields that I have added using the enhancement MEREQ001 while displaying in me51n / me52n / me53n.
Now I have a requirement to change the name of the custom tab created for transactions me51n / me52n / me53n from Customer Data to Others.
Can anyone suggest me how to go about doing this???
Thanks in advance.
Abhisek.
P.S.:- Points will be be duly awarded 4 helpfull answers.

Hi,
I tried doing whatever you had suggested but it seems that it is not working.
Could you suggest some other way to do this?
Thanks and regards.
Abhisek.

Need to add extra fields in Custom tab using EEWB.

hi ,
I extended business partner with 10 custom fields using EEWB by creating an custom tab. I would like to add 2 more fields in the same custom tab . I am unable to find the provision to add new field to the existing project. so i am deleting the existing project and creating new project and adding all the =and new fields.
Now when I am creating new project i am loosing the old field names. It creating the new fields with new field names.
My requirement is I should create a new fields without changing the old field names.
So Please can any one help me as how to approach these without deletion or changing the existing field names.
Finally my custom tab should contain 12 fields.
Thanks
viswa

Hi viswa,
I have a requirement to add 2 new fields to the Standard Transaction (called <b>BP</b> ).
I have gone through various concepts like <b>EEWB and BDT</b> tools. But, still I am not able to get the things well.
So please provide me with the procedure to explore things and work on the requirement.
Thanks in advance.
Regards,
Vishnu.

Hiding a customized tab (from header and item) in ME21N, ME22N and ME23N

Hi SAP gurus,
I need to make invisible a customized tab in Po creation(me21n), change(me22n) and display(me23n) in enjoySAP transaction for a particulat Doucument type.
Please let me know the possibility and the solution to implement.
Thanks,
Kishore P

Hi Kishore,
The customized tab cannot be made visible or invisible conditionally. Instead you can write some text inside the tab to distinguish between different document types.
Hope this helps.
Regards,
Abhijeet Kapgate

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

How to handle a custom tab in PCUI??

Hi everyone...
I have added a custom tab for the standard pcui opportunity application. If i click on that custom tab I want a new view or page to be dispalyed. Can anyone please let me know how to get this done or how to configure this.
This is a bit urgent.
Thanks and Regards,
Bhargava

Hello,
you can find details about what Shailaja Gandam described in my Blog:
<a href="/people/gregor.wolf3/blog/2005/05/27/use-crm-pcui-html-viewer-to-call-a-custom-url CRM PCUI HTML viewer to call a custom URL</a>.
Regards
Gregor

Custom tab is replacing excise invoice tab in migo

Hi all,
I have developed BADI for MB_MIGO_BADI to add tab strip in migo ,
when i execute transaction tab is showing correctly ,But problem is when i enter purchase document number
Excise invoice tab is replacing my customized tab and while displaying data only customized tab only appearing
in window Excise invoice tab tab is not displaying .
i need to display boat tabs how can it possible.
Can any one help me out of this problem...
method IF_EX_MB_MIGO_BADI~PBO_HEADER.
    e_cprog   = 'ZMIGO1'.
    e_dynnr   = '8999'.                     "External fields: Input
    e_heading = 'Gate entry detail'(004).
endmethod.

Hi,
Try with gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'.
Thanks,
Shailaja Ainala.

Creation of a custom TAB in SAP standard Transcation

Hi Experts,
Request the ones who created a customized TAB in any standard trascation .Say in ME22N. We will have some tabs at Line item level. Now our requirement is to add one more tab. For that we need to know
whether we have to create screen through se51 and attach it to screen ? or we should use any user exit or badi to create screen or we need to create screen by using configuration?
If anybody having hand-on knowledge about this TAB creation...request you to share the same....Detailed information and fast response will be highly appreciated...Ofcourse reward points for suitable entry.....
Thanks,
Sampath

Hi
IF you want to add one subscreen in the PO screen then use MM06E005 screen exit .
Create your screen and activate the exit and the screen will appear on the ME21n screen.
Other wise use the BADI for PO screen.
Thanks
Lincon

Unable to add custom tab in ME21N using BADI ME_GUI_PO_CUST

Dear All,
I need one extra tab in Item Details of ME21N.
This extra tab should have two fields of my own.
I have put the coding in the SUBSCRIBE method of the implementation of the BADI ME_GUI_PO_POST as follows:
data: ls_subscriber like line of re_subscribers.
we want to add a customer subscreen on the item detail tab
check im_application = 'PO'.
check im_element = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
clear re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = 'Event Details'.
the dynpro number to use
ls_subscriber-dynpro = '0001'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLMEPOBADIEX'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZSM_PO_STRUC'.
a label can be defined
ls_subscriber-label = 'Event ID'.
the position within the tabstrib can be defined
ls_subscriber-position = 5.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
append ls_subscriber to re_subscribers.
I put breakpoints in the implementation of the method, and it is going into it, yet the extra tab is not getting displayed on the screen.
Please give your suggestions on this.
Regards,
Prosenjit.

Hi Prosengit,
I am not aure about u r BADI,
BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
IN thi senhancement u have thrre screen exits.In this enhancement
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
u can add subscreen and u can add u r own fields here .
and u can write u r code in 'EXIT_SAPMM06E_006'.
if u want to change the title of the program.
Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
I hope this solves u r problem.

Adding new custom field in already existing custom tab for MM01

Hello Guru,
I have a requirement that add a custom field in already existing custom view of MM01. I did the following steps :
1. I have cerated a new field in MARA using APPEND structure.
2. I have found the function group(Y_FE_MARA) that already there other subscreens, so that I have added another subscreen in that function group and created a field from MARA in the screen.
3. in SPRO went for the path Logistics General->Material Master->Configuring the Material->Define Structure of Data screens for Each Screen sequence
In the 3rd step, I have choosen already existing screen sequence(Y1) and went for Data Screens and choosen for Custom tab and double click on subscreens and then I have added the program as SAPLY_FE_MARA and subscreen number(011) and saved it.
After all the above steps, I have run MM02/MM03 then the field is not getting displayed in the screen of custom view.
Did I miss any steps here? Please suggest me if I did something wrong.
Thanks and Regards,
Muralikrishna Peravali

Hi Raymond,
Thank you for the reply. As per the note some one already implemented the Screen Enhancement with 2 custom views. I need to add the field in any one of existing custom view. So for this I have created a Subscreen in copied function group of MGD1(Y_FE_MARA). But in the function group already 10 Subscreens were created. Is this is the problem? or else copy the FG MGD1 into another FG and create the subscreen will be feasible to my scenario?
Please suggest me.
Thanks and Regards,
Muralikrishna Peravali

How to change the text of customer tab in Me23n

Hi
I have added new customer tab in Me23n at item level.
Its text is Customer Data.
I would like to change to some other text.
How to change the text of customer tab in Me23n
Regards
Amruta

Amruta,
I had the same query today and finally found the answer.
In order to change the title text or description of the "Customer Data" tab in ME23N, etc. you need to define a new text symbol in program SAPLXM06. The text symbol must be number 111 for the PO data. Make sure you define this text symbol in the language you are using when viewing the PO. I had issues with this as the original language of object SAPXM06 is not my logon language.
The standard code which picks up this text is in function module MEGUI_BUILD_PO_ITEM_PLUGIN. I could not find any documentation around this functionality.
Hope this helps!
Ben

Trigger badi after giving data in custom tab of po item

Hi,
We have added custom tab in po item level, now we want to make those fields manditory
for specific document type.We are using badi ME_PROCESS_PO_CUST .
The message is getting triggered initially , but after giving data in the custom fields the badi
is not getting triggered again.And triggers if we make changes to some other fields in po.
So can we trigger the badi after giving data in custom tab ?
I was trying something like this.
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM .
DATA: l_if_header TYPE REF TO if_purchase_order_mm,
        ls_header TYPE mepoheader,
       ls_mepoitem TYPE mepoitem,
l_if_header = im_item->get_header( ).
ls_header   = l_if_header->get_data( ).
CALL METHOD im_item->get_data
    RECEIVING
      re_data = ls_mepoitem.
IF ls_header-bsart = 'BW'.
if ls_mepoitem-ZZONAME IS INITIAL.
MESSAGE 'Plz enter Operator name in custom data' TYPE 'E'.
endif.
endif.
endmethod.
Any pointers are welcome..

Solved using exit EXIT_SAPMM06E_012
This exit will trigger even after giving data in custom tab at po item level.

Custom tab in RTMT

Similar Messages

Maybe you are looking for