Custom Table wierd behaviour

Hi All,
I have a custom table. when i view this custom table in SE11, it looks somewhat different than what i see in SE16n. When I see in SE16n, it shows one field to be non-primary, although it shows it that field primary when viewed in SE11.
That particular field is also non-primary when viewed in SM30.
Please help me understand why this is happening.
Thanks
Rohit

Hi Rohit,
Did you activated the Custom Table multiple times. You can have a check at the following SE11-> Table name and then Display -> Utilities-> Runtime Object -> Check .
It will give you the status of the generate object and will let you know if there is any problem with the table. You can once again make a small change in the table ( Change description) and then can again activate it.
Hope this will help.
Thanks,
Samantak.

Similar Messages

How to populate custom table field value into standard DFF

Hi Gurus
I am newbie to the OAF
I have a requirement to populate the custom table field value into standard DFF. we enabled the DFF in ReqDistDFFOnAcct(po_req_distributions_all). On the requisition tab as soon as i click on the checkout button, the custom field value has to be shown in the requisition distributions DFF field along with the standard Columns like charge account, percent, qty and when we click on the next button, it has to hit the base table ie., po_req_distributions_all.
the standard columns data is showing the screen. how to acheive this requirement programatically
There is a EO for the req distributions table. please help me how to achevie this requirement.
Any help woud be greatly appreciated.
Thank You!
Krishna

Thanks Aj. Finally i made some progress....but i am getting an error in the inst_top OPMN folder 10/10/08 15:37:14 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml. I cleared the cache, bounced the webserver. Could not able to understand what is this error
Following is the code that i have written. I am not able to find out what is the error. please help me how to fix this error. there is no changes in the page and the value is not auto populating. the page is having the normal behaviour as the standard one.
Thanks in Advance for your help...
public class xxCheckoutDistsCO extends CheckoutDistsCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String UnitId="";
//First get the Application Module
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("PoRequisitionLinesVO");
String Reqlineid="";
String Linenum="";
String DeliverLoc="";
if(vo.first() !=null)
Reqlineid= vo.first().getAttribute("RequisitionLineId").toString();
Linenum = vo.first().getAttribute("LineNum").toString();
DeliverLoc = vo.first().getAttribute("DeliverToLocationId").toString();
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", Reqlineid,1);
// pageContext.writeDiagnostics("TEST >", Linenum,2);
// pageContext.writeDiagnostics("TEST >", DeliverLoc,3);
UnitId=null;
String Querry="select amli_icx_oaf_utils.get_blding_unit_id (?,?,?) from dual";
try
PreparedStatement ps=am.getOADBTransaction().getJdbcConnection().prepareStatement(Querry);
ps.setInt(1,Integer.parseInt(Reqlineid));
ps.setInt(2,Integer.parseInt(Linenum));
ps.setInt(3,Integer.parseInt(DeliverLoc));
ResultSet rs=ps.executeQuery();
// ps.execute();
// am.getOADBTransaction().commit();
while (rs.next())
System.out.println(" Query Results ");
UnitId= rs.getString(1);
System.out.println(" first > ");
rs.close();
ps.close();
catch(SQLException a)
System.out.println(" Error "+a);
System.out.println(" Second > ");
System.out.println(" Third > "); ----the program is executing upto here...it is not setting the value after this.
OAViewObject povo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
if(povo.getCurrentRow()!=null ) --------If i remove this condition i am getting the nullpointer exception in page.....
System.out.println(" Fourth > ");
povo.getCurrentRow().setAttribute("Attribute12",UnitId);
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", UnitId, 1);
Thanks
krishna

Error while deleting a customer table

When I try to delete a customer table which is saved as a local object I get an error stating that the table is still used in ABAP Dictionary. It seems that the customer table is still used in a customer program, but the program is already deleted! I deleted the program earlier and thus no longer exist in our system. I cannot find any trace of the program, but am unable to delete the customer table now. Any suggestions?

Program name would have been of the table maintenance generator and you deleted it manually.
It should have been deleted from TMG .
Your problem will be resolved if you will create Table maintenance of the database table and then delete it again.

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to find the Table from which a Custom table is created.

Hi Gurus,
I have a custom table in SAP and want to figure how that has been created. How can I do that?
Regards
Prashant

Hello Prashant,
what do you mean by "how"?
When you say custom table do you mean "Customization table" or a "Customer table" (in namespace Z... or Y...)
Anyway, you can access SE11 transaction, view the table and then check its attributes.

Converting garbled characters for JAPANESE characters in a custom table

Hi all,
I have a custom table that store Japanese characters.
After my company has upgraded to ECC6.0, this data in the custom table has become garbled and its alot of it garbled.
Is there any SAP tool that can I use to make the correction on those garbled Japanese characters?
Thanks,
William Wilstroth

Hi Nils,
I really really really had a field day reading and testing around UC... To my dissappointment, I do not have the authorization to use SUMG and SCP too as well as a few of the TCODES...
I finally told my higher level technical mgnt. that this table might need some changes...
Has this problem of mine got anything to do with MDMP since its no longer supported in ECC6 and I found one coding that search for MDMP in RSVTPROT...
My colleagues suggest that the data be corrected from table DBTABLOG... which i find, in my opinion, is not the right way...
Thanks,
William

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

Custom Table for Verifying Duplicate Invoice against Legacy Invoice Data

Hi All,
We are trying to upload legacy invoice data in a custom table. Then we want to use SAP duplicate invoice check functionality to look for the potential duplicate invoice from this custom table as well apart from the standard SAP tables.
If you know of some user exit or any function module which I can use to link this custom table with the standard SAP duplicate invoice check functionality then it would be of great help.
Regards,
Sanjay

Hi Jurgan!
Thanks for the reply,
We are using ECC6,
Support pack : SAPKH60013
Settings for Duplicate Invoice Check In Vendor Master is correct
Customization setting OMRDC transaction, tick mark for invoice reference no. only
If all the cited characteristics match, the system displays a
customizable message. M8462 (if logistics invoice documents are found) or M8108 (if accounting documents are found).
I have ensured that message M8108 (if accounting documents are found) is maintained as an error message in OMRM.
Still system is allowing duplicate invoices for the reference nos. 00082 and 00072.
For other reference Nos. which are previously used for other documents, system issues error message successfully.
I dont want to delete archived accounting doc. and if I maintaind BKPF entris of this archived doc manually it will create probelm in FI.
is this happen due to life span of secondory index of archived accounting doc. is completed ?.
Please Help
Many Thanks
Vikas

How to create a custom table in the below format

Dear Friends
can any one please let me know hot to create a custom table as below
outpatient
|employeeno | class | startdate | enddate | spouse |1stchild | 2nchild| Rate | amount|
My FO wants to enter in the SM30 as above ......i.e he wants to have spouse ,1st child and 2nd child under one group........so he asking me to make as one group
and give a heading as outpatient.........similary i have to give for in patient.
Please could any one tell is it possible.
regards
syamala...

Under the SAP forums section, there is ABAP development and in That there is ABAP General.
SAP forums > ABAP development > ABAP General.
Post in that forum.
Regards
AK
Please reward if helpful

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

Wierd Behaviour of IF then ELSE standard function

Hi All,
I am facing a very wierd behaviour of the IF then ELSE function in a mapping.
Condition to be checked:   if GDS_id = 1, then (condition 1 - RFC lookup ) ElSE (condition 2 - JDBC Lookup followed by an RFC lookup).
Issue: The input payload is 0-unbounded with a possibility of a different GDS_id values.
Case 1 :
As shown below, in case the input payload has 3 repitions of the RECORD, with the Fit set having GDS_ID = 01, the mapping runs perfectly fine . All the If then Else branches are getting executed.
Case 2:
Where as iF the first GDS_ID != 01 (not 01) , thenthe target value is not getting populated properly .
I have tried all the possibilities and combinations but i am unable to resolve this. Please help.
Attached the screen shot of the message mapping, and sample test results of both the use cases.
For instance, below is a sample payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_EMERGO_common xmlns:ns0="http://sabreEMERGO_common.com">
<Record>
      <booking_date>08012013</booking_date>
      <iata_code>2325540</iata_code>
      <gds_id>01</gds_id>
      <pos_code>RD3A</pos_code>
      <gds_code>01</gds_code>
      <net_booking>11</net_booking>
   </Record>
<Record>
      <booking_date>08012013</booking_date>
      <iata_code>2325540</iata_code>
     <gds_id>02</gds_id>
      <pos_code>54S8 </pos_code>
      <gds_code>02</gds_code>
      <net_booking>11</net_booking>
</Record>
</ns0:mt_EMERGO_common>

Hi All,
I have changed the message mapping like below. Even though i am not getting my target filed as value. As per my requirement if GDS_ID=01 then perform the RFC lookup and pass the value to target fields KUNNR and else GDS_ID=02 then perform the JDBC LOOKUP and JDBC LOOKUP output to RFClookup .RFC LOOKUP output pass to my target field KUNNR.
Result of my mapping is 1st record only populated KURNNR in Target side and 2nd record not showing as KUNNR filed in target side .But I have taken look on display queue in If then else out showing 2 values but it is not passing to target filed.
Please provide any suggestion to resolve this issue.
Please find the mapping logic:
Please find the test screen:
Please find the test Data:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_EMERGO_common xmlns:ns0="http://sabreEMERGO_common.com">
   <Record>
      <booking_date>08012013</booking_date>
      <iata_code>2325540</iata_code>
     <gds_id>02</gds_id>
      <pos_code>54S8 </pos_code>
      <gds_code>AA</gds_code>
      <net_booking>11</net_booking>
   </Record>
   <Record>
      <booking_date>08012013</booking_date>
      <iata_code>2325540</iata_code>
      <gds_id>01</gds_id>
      <pos_code>RD3A</pos_code>
      <gds_code>AA</gds_code>
      <net_booking>11</net_booking>
   </Record>
</ns0:mt_EMERGO_common>
Regards,
Ramesh

How to do a Search help on SAP structure field listing custom table data?

i have a SAP screen (Trans KE52) that they want to have a drop down (search help on).
The drop down should list values from a custom table.
How do you do this?
The values to be displayed are NOT from a structure table but from a transparent table. i believe I will need a search FM to do this but not sure how it is to be done.
Any one have ideas?
Thanks!
Scott

Hi Scott,
You need to go to SE11 and look for a searh help that match your requirment or build one.
In case you are going to develop one, in the definition tab of the search help look for the selection method and put in the input field the name of your transparent table.
After that you must specify the fields that you need to appear at the list and the one that is going to be selected for your field. This step you have to do it on the search help parameter grid.
Regards,
Eric
PD. Reward points if this was helpful

Can I create a custom table of contents and link to other .pdf files based on responses to a form?

Hey Everyone! First post ever, so bear with me:
I'm trying to create a streamlined method to use a form to let myself and others add information and select certain options to put together a custom table of contents. Basically, I would like to have a form with a series of text fill and single/multiple choice options that will automatically populate a table of contents based on the selections and will link to other .pdf files that are associated with the selections. I was hoping this would be possible with a form, but I'm relatively new to the function of the software as a whole and my research came up short. Any suggestions on how to start are more than welcome, and if I wasn't quite clear enough I would be happy to elaborate.
Thanks for your time!

You would need to search for other PDF creation software that can accomplish what you desire.
There are many cheaper PDF creation alternatives other than Adobe's Acrobat Pro software.
Also, try doing a web search under these terms to see if you can find an app/software/solution that may work for you.
How to create table of contents in PDF files

How to enable the DFF in OAF page(where Dff is based on the custom table).

Hi Experts!!
I am in the process of enabling the dff in OAF page. I am not able to enable the dff if am using the Custom table.
Ex:
Assume that my DFF XX_DFF is using the custom table XX_TABLE of att1,att2..
I am able to enable the dff in OAF page but not able to make those values entered to get stored in the custom table.
I need helping hands to help me out to get the entered dff values stored in my custom table.
Kindly provide me the steps so that I can follow up..
Best wishes,
Thiru.

Hi,
thiru_apps wrote:
I need to store the captured values of Dff(which was enabled in the seeded page based on the custom table XX_Table) and the same needs to be stored into the custom table xx_Table.
Basically the entered values for the DFF enabled should have to be get stored in the XX_TABLE(Custom TAble).As per my understands in Standard page u want create some extra fields and those should be save in custom table...is it ...
For that u r going create stack layout region in standard page via personalization and extend with custom region.
IF im geting u correctly u need to write code in co and am.
---U had already created the components eo vo AM co...
---For the custom region in Jdev do the mapping of viewInstacne and view attribute properties for the fields.
---In AM:
public void CreateVo(OAPageContext pageContext, OAWebBean webBean)
Row hrow;
OADBTransaction tr=getOADBTransaction();
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
vo. executeQuery();
hrow=vo.createRow();
vo.insertRow(hrow);
hrow.setNewRowState(Row.STATUS_INITIALIZED);
public void savetr()
OADBTransaction tr=getOADBTransaction();
tr.commit();
In Co ProcessREq:
AMImpl AM=(AMImpl)pageContext.getApplicationModule(webBean);
AM.CreateVo(pageContext, webBean);
In Co ProcessFormREq:
---GEt the event of the save button of the standard page
if(pageContext.getParameter("save")!= null)---DI of the standard page
AM.savetr(pageContext, webBean);
Regards
Meher Irk

How can i create a custom table in to my banking services server

I am having product type and account type details for those things I need to create a table
Product Id.                 Account Type
DP_PYGO_P     21
DP_BASIC     25
DP_UNLIMIT     24
DP_ADVANTG     17
DP_SAV                     34
DP_TBILL                     54
DP_USDCHQ     19
DP_FREEDOM     52
For the above fields how can i create a custom table into banking services server

Transaction SE11, maybe? I don't really see the problem, unless you have never created a transparant table before...

Custom Table wierd behaviour

Similar Messages

Maybe you are looking for